I am using iis 8.0 and trying to remove any allowed/restricted ip address from the list, screen shot is attached. i have used the remove variable by following this link.
var websiteName = "abc.com";
using (var serverManager = new ServerManager())
{
var config = serverManager.GetApplicationHostConfiguration();
var ipSecuritySection = config.GetSection("system.webServer/security/ipSecurity", websiteName);
var ipSecurityCollection = ipSecuritySection.GetCollection();
var addElement = ipSecurityCollection.CreateElement("remove");
addElement["ipAddress"] = ipAddress;
ipSecurityCollection.Remove(addElement);
serverManager.CommitChanges();
}
Guide me am i doing wrong, if yes? then what is it.
I have found the way to remove entry from the collection.
var websiteName = "abc.com";
using (var serverManager = new ServerManager())
{
var config = serverManager.GetApplicationHostConfiguration();
var ipSecuritySection = config.GetSection("system.webServer/security/ipSecurity", websiteName);
var ipSecurityCollection = ipSecuritySection.GetCollection();
var addElement = ipSecurityCollection.CreateElement("remove");
addElement["ipAddress"] = ipAddress;
ipSecurityCollection.add(addElement);
serverManager.CommitChanges();
}
Every thing was alright only one thing was wrong in the 2nd last line.
ipSecurityCollection.remove(addElement);
Change it to
ipSecurityCollection.add(addElement);
After that it will work perfectly.
Related
i am tried to find the link wall face,but when i use the reference to create a new dimension , i will get result about 'invaild number of references'. i cant trans link face to active face.
public Result Execute(ExternalCommandData commandData, ref string message, ElementSet elements)
{
UIDocument uidoc = commandData.Application.ActiveUIDocument;
Document doc = uidoc.Document;
var rf1 = uidoc.Selection.PickObject(ObjectType.PointOnElement, "select");
var element1 = doc.GetElement(rf1);
var location = element1.Location as LocationPoint;
var point = location.Point;
var rf2 = uidoc.Selection.PickObject(ObjectType.LinkedElement, "select");
var linkElement = doc.GetElement(rf2) as RevitLinkInstance;
var linkDoc = linkElement.GetLinkDocument();
var linkWall = linkDoc.GetElement(rf2.LinkedElementId) as Wall;
var wallLocation = linkWall.Location as LocationCurve;
var curve = wallLocation.Curve;
var cRf = curve.Reference;
var solid = BIMTools.Geometry.GetSolid(linkWall);
Face face = null;
foreach (var solidFace in solid.Faces)
{
XYZ normal = ((Face)solidFace).ComputeNormal(new UV(0, 0));
if (normal.Y < 0)
{
face = solidFace as Face;
break;
}
}
var viewLevel = uidoc.ActiveView.GenLevel.Elevation;
var tPoint = new XYZ(point.X,(face as PlanarFace).Origin.Y, viewLevel);
point = new XYZ(point.X, point.Y, viewLevel);
var line = Line.CreateBound(point, tPoint);
var references = new ReferenceArray();
references.Append(rf1);
references.Append(face.Reference);
using (Transaction trans = new Transaction(doc,"create"))
{
trans.Start();
var dimension = doc.Create.NewDimension(uidoc.ActiveView, line, references);
trans.Commit();
}
return Result.Succeeded;
}
The Building Coder provides a whole list of articles on creating dimensioning.
I found this useful code
var x = document.querySelectorAll("a");
var myarray = []
for (var i=0; i<x.length; i++){
var nametext = x[i].textContent;
var cleantext = nametext.replace(/\s+/g, ' ').trim();
var cleanlink = x[i].href;
myarray.push([cleantext,cleanlink]);
};
function make_table() {
var table = '<table><thead><th>Name</th><th>Links</th></thead><tbody>';
for (var i=0; i<myarray.length; i++) {
table += '<tr><td>'+ myarray[i][0] + '</td><td>'+myarray[i][1]+'</td></tr>';
};
var w = window.open("");
w.document.write(table);
}
make_table()
When you add this to the web browser console - it opens up a new webpage with all weblinks with names
however some of the names are shortned.
is there a way to edit it so it shows the entire text name for that link
I have a website hosted by Azure that includes a Web API which I'm using to develop an android app. I'm trying to upload a media file to the server where it's encoded by a media encoder and saved to a path. The encoder library is called "Media Toolkit" which I found here : https://www.nuget.org/packages/MediaToolkit/1.0.0.3
My server side code looks like this:
[HttpPost]
[Route("upload")]
public async Task<HttpResponseMessage> Upload(uploadFileModel model)
{
var result = new HttpResponseMessage(HttpStatusCode.OK);
if (ModelState.IsValid)
{
string thumbname = "";
string resizedthumbname = Guid.NewGuid() + "_yt.jpg";
string FfmpegPath = Encoding_Settings.FFMPEGPATH;
string tempFilePath = Path.Combine(HttpContext.Current.Server.MapPath("~/video"), model.fileName);
string pathToFiles = HttpContext.Current.Server.MapPath("~/video");
string pathToThumbs = HttpContext.Current.Server.MapPath("~/contents/member/" + model.username + "/thumbs");
string finalPath = HttpContext.Current.Server.MapPath("~/contents/member/" + model.username + "/flv");
string resizedthumb = Path.Combine(pathToThumbs, resizedthumbname);
var outputPathVid = new MediaFile { Filename = Path.Combine(finalPath, model.fileName) };
var inputPathVid = new MediaFile { Filename = Path.Combine(pathToFiles, model.fileName) };
int maxWidth = 380;
int maxHeight = 360;
var namewithoutext = Path.GetFileNameWithoutExtension(Path.Combine(pathToFiles, model.fileName));
thumbname = model.VideoThumbName;
string oldthumbpath = Path.Combine(pathToThumbs, thumbname);
var fileName = model.fileName;
try
{
File.WriteAllBytes(tempFilePath, model.data);
}
catch (Exception e)
{
Console.WriteLine(e.Message);
}
using (var engine = new Engine())
{
engine.GetMetadata(inputPathVid);
// Saves the frame located on the 15th second of the video.
var outputPathThumb = new MediaFile { Filename = Path.Combine(pathToThumbs, thumbname + ".jpg") };
var options = new ConversionOptions { Seek = TimeSpan.FromSeconds(0), CustomHeight = 360, CustomWidth = 380 };
engine.GetThumbnail(inputPathVid, outputPathThumb, options);
}
Image image = Image.FromFile(Path.Combine(pathToThumbs, thumbname + ".jpg"));
//var ratioX = (double)maxWidth / image.Width;
//var ratioY = (double)maxHeight / image.Height;
//var ratio = Math.Min(ratioX, ratioY);
var newWidth = (int)(maxWidth);
var newHeight = (int)(maxHeight);
var newImage = new Bitmap(newWidth, newHeight);
Graphics.FromImage(newImage).DrawImage(image, 0, 0, newWidth, newHeight);
Bitmap bmp = new Bitmap(newImage);
bmp.Save(Path.Combine(pathToThumbs, thumbname + "_resized.jpg"));
//File.Delete(Path.Combine(pathToThumbs, thumbname));
using (var engine = new Engine())
{
var conversionOptions = new ConversionOptions
{
VideoSize = VideoSize.Hd720,
AudioSampleRate = AudioSampleRate.Hz44100,
VideoAspectRatio = VideoAspectRatio.Default
};
engine.GetMetadata(inputPathVid);
engine.Convert(inputPathVid, outputPathVid, conversionOptions);
}
File.Delete(tempFilePath);
Video_Struct vd = new Video_Struct();
vd.CategoryID = 0; // store categoryname or term instead of category id
vd.Categories = "";
vd.UserName = model.username;
vd.Title = "";
vd.Description = "";
vd.Tags = "";
vd.Duration = inputPathVid.Metadata.Duration.ToString();
vd.Duration_Sec = Convert.ToInt32(inputPathVid.Metadata.Duration.Seconds.ToString());
vd.OriginalVideoFileName = model.fileName;
vd.VideoFileName = model.fileName;
vd.ThumbFileName = thumbname + "_resized.jpg";
vd.isPrivate = 0;
vd.AuthKey = "";
vd.isEnabled = 1;
vd.Response_VideoID = 0; // video responses
vd.isResponse = 0;
vd.isPublished = 1;
vd.isReviewed = 1;
vd.Thumb_Url = "none";
//vd.FLV_Url = flv_url;
vd.Embed_Script = "";
vd.isExternal = 0; // website own video, 1: embed video
vd.Type = 0;
vd.YoutubeID = "";
vd.isTagsreViewed = 1;
vd.Mode = 0; // filter videos based on website sections
//vd.ContentLength = f_contentlength;
vd.GalleryID = 0;
long videoid = VideoBLL.Process_Info(vd, false);
return result;
}
else
{
throw new HttpResponseException(Request.CreateResponse(HttpStatusCode.NotAcceptable, "This request is not properly formatted"));
}
}
When the debugger hits the line using (var engine = new Engine()) I get 500 internal server error thrown. I don't get this error testing it on the iis server. Since it works fine on my local server and not on the azure hosted server, I figured it had to do with the Azure service rather than an error in my code. If so is the case then how would I be able to get around this issue? I don't want to use azure blob storage as it would require a lot of changes to my code. Does anyone have any idea what might be the issue.
Any helpful suggestions are appreciated.
Server.MapPath works differently on Azure WebApps - change to:
string pathToFiles = HttpContext.Current.Server.MapPath("~//video");
Also, see this SO post for another approach.
I am trying to generate WIF from extendedprivatekey, but i am getting invalid WIF.
How should WIF look : https://bitcoin.org/en/developer-guide#wallet-import-format-wif
I've followed instructions from above link and got this code:
var crypto = require('crypto');
var bitcore = require('bitcore');
var HierarchicalKey = bitcore.HierarchicalKey;
var Address = bitcore.Address;
var networks = bitcore.networks;
var coinUtil = bitcore.util;
var knownBytes = coinUtil.sha256('testing');
var hkey = HierarchicalKey.seed(knownBytes,'testnet');
var key = new Buffer(hkey.derive('m/0\'/0/0').extendedPrivateKey);
var hash = new Buffer ([0xef].concat(key).concat([1]));
var hashses = doubleSHA256(hash);
var checksum = hashses.slice(0, 4);
var data = Buffer.concat([hash, checksum]);
var ress = bitcore.base58.encode(data);
console.log(ress);
function sha256(data) {
return new Buffer(crypto.createHash('sha256').update(data).digest('binary'), 'binary');
};
function doubleSHA256(data) {
return sha256(sha256(data));
};
I suspect there is somewhere converting error.
EDIT : I've figured it myself. Will post solution later.
I found the answer to this buried in the WalletKey.js code:
var bitcore = require('bitcore');
var HierarchicalKey = bitcore.HierarchicalKey;
var Address = bitcore.Address;
var networks = bitcore.networks;
var coinUtil = bitcore.util;
var knownBytes = coinUtil.sha256('testing');
var hkey = HierarchicalKey.seed(knownBytes,'testnet');
var derived = hkey.derive('m/0\'/0/0');
var priv = new bitcore.PrivateKey(networks.testnet.privKeyVersion, derived.eckey.private, derived.eckey.compressed);
var wif = priv.toString();
I need to offer a feature which allows InDesign users to select a page range in an InDesign document and create a new document out of those pages. This sounds simple, but it isn't...
I have tried many different ways of doing this but they have all failed to some degree. Some methods put all pages in a single spread (which sometimes makes InDesign crash). The best I've been able to do (see code below) still has problems at the beginning and the end (see screenshots below):
The original document:
The new document:
The question: How can I create a new document out of a subset of another document's pages (in InDesign using ExtendScript) without having the problems shown in the screenshots?
note: The behavior of the script is quite different in CS5.5 and CS6. My question concerns CS6.
The second screenshot was obtained by applying the following code to the document shown in the first screenshot:
CODE
var firstPageName = { editContents: "117" }; // This page number is actually entered by the user in an integerEditbox
var lastPageName = { editContents: "136" }; // This page number is actually entered by the user in an integerEditbox
var sourceDocument = app.activeDocument;
var destDocument = app.documents.add();
destDocument.importStyles(ImportFormat.paragraphStylesFormat, new File(sourceDocument.filePath + "/" + sourceDocument.name), GlobalClashResolutionStrategy.LOAD_ALL_WITH_OVERWRITE);
destDocument.importStyles(ImportFormat.characterStylesFormat, new File(sourceDocument.filePath + "/" + sourceDocument.name), GlobalClashResolutionStrategy.LOAD_ALL_WITH_OVERWRITE);
destDocument.viewPreferences.horizontalMeasurementUnits = sourceDocument.viewPreferences.horizontalMeasurementUnits;
destDocument.viewPreferences.verticalMeasurementUnits = sourceDocument.viewPreferences.verticalMeasurementUnits;
destDocument.documentPreferences.facingPages = sourceDocument.documentPreferences.facingPages;
destDocument.documentPreferences.pageHeight = sourceDocument.documentPreferences.pageHeight;
destDocument.documentPreferences.pageWidth = sourceDocument.documentPreferences.pageWidth;
destDocument.documentPreferences.pageSize = sourceDocument.documentPreferences.pageSize;
var sourceSpreads = sourceDocument.spreads;
var nbSourceSpreads = sourceSpreads.length;
var firstPageFound = false;
var lastPageFound = false;
var i;
var newSpreadNeeded;
var currentDestSpread;
for (i = 0; !lastPageFound, i < nbSourceSpreads; ++i) {
newSpreadNeeded = true;
var sourcePages = sourceSpreads[i].pages;
var nbSourcePages = sourcePages.length;
var j;
for (j = 0; !lastPageFound, j < nbSourcePages; ++j) {
if (sourcePages[j].name === firstPageName.editContents) {
firstPageFound = true;
destDocument.documentPreferences.startPageNumber = parseInt(firstPageName.editContents); // We want to preserve page numbers
}
if (firstPageFound) {
// Copy this page over to the new document.
var firstInNewSpread = false;
if (newSpreadNeeded) {
currentDestSpread = destDocument.spreads.add();
newSpreadNeeded = false;
firstInNewSpread = true;
}
var newPage = sourcePages[j].duplicate(LocationOptions.AT_END, currentDestSpread);
var k;
for (k = 0; k < newPage.index; ++k) {
currentDestSpread.pages[k].remove();
}
}
if (sourcePages[j].name === lastPageName.editContents) {
lastPageFound = true;
}
}
}
destDocument.spreads[0].remove();
I was hacking around and came up with this little script. Although it approaches the problem from the opposite direction, it seems to work fine here. Also, I'm still running in InDesign CS5, but maybe it will work for you. Hopefully I got the gist of your question?
This will extract pages 3 through 5 into a separate document:
var doc = app.activeDocument;
var newFilePath = doc.filePath + "/subset_" + doc.name;
var newFile = File(newFilePath); // Create a new file path
doc.saveACopy(newFile); // Save a copy of the doc
var newDoc = app.open(newFile); // Open the copy
var firstPageNum = 3; // First page number in the range
var lastPageNum = 5; // Last page number in the range
var firstPage = newDoc.pages[firstPageNum-1];
var lastPage = newDoc.pages[lastPageNum-1];
// Remove all text from the last page in the range to the end of the document
var lastPageFrames = lastPage.textFrames.everyItem().getElements();
for (var i=0; i < lastPageFrames.length; i++) {
var frame = lastPageFrames[i];
var parentStory = frame.parentStory;
var lastFrameInsert = frame.insertionPoints.lastItem();
var lastStoryInsert = parentStory.insertionPoints.lastItem();
var textAfter = parentStory.insertionPoints.itemByRange(lastFrameInsert,lastStoryInsert);
textAfter.remove();
};
// Remove all text from the beginning of the document to the first page in the range
var firstPageFrames = firstPage.textFrames.everyItem().getElements();
for (var i=0; i < firstPageFrames.length; i++) {
var frame = firstPageFrames[i];
var parentStory = frame.parentStory;
var firstFrameInsert = frame.insertionPoints.firstItem();
var textBefore = parentStory.insertionPoints.itemByRange(0,firstFrameInsert.index);
textBefore.remove();
};
// Remove the pages that aren't in the range
var allPages = newDoc.pages.everyItem().getElements();
for (var i=0; i < allPages.length; i++) {
var page = allPages[i];
if (i < firstPageNum || i > lastPageNum) {
page.remove();
}
};