I am using MT7688 module with openWRT OS, version 15.05. I did install usbip into the device with:
#opkg install http://downloads.lede-project.org/releases/17.01.1/targets/ramips/mt7688/packages/kmod-usbip-client_4.4.61-1_mipsel_24kc.ipk
#opkg install http://downloads.lede-project.org/releases/17.01.1/targets/ramips/mt7688/packages/kmod-usbip-server_4.4.61-1_mipsel_24kc.ipk
#opkg install http://downloads.lede-project.org/releases/17.01.1/targets/ramips/mt7688/packages/kmod-usbip_4.4.61-1_mipsel_24kc.ipk
Failure scenario:
root#mylinkit:/# usbip
-ash: usbip: not found
So, looks like something broken at user space. Do any one know the solution for it?
Below are the logs which shows kernel module is installed:
root#mylinkit:/# lsmod|grep usbip
usbip_core 4768 2 vhci_hcd
usbip_host 11256 0
root#mylinkit:/# find -name *usbip*
./etc/modules.d/usbip-server
./etc/modules.d/usbip
./etc/modules.d/usbip-client
./lib/modules/3.18.23/usbip-core.ko
./lib/modules/3.18.23/usbip-host.ko
./overlay/upper/etc/modules.d/usbip-server
./overlay/upper/etc/modules.d/usbip
./overlay/upper/etc/modules.d/usbip-client
./overlay/upper/lib/modules/3.18.23/usbip-core.ko
./overlay/upper/lib/modules/3.18.23/usbip-host.ko
./overlay/upper/usr/lib/opkg/info/kmod-usbip-server.postinst-pkg
./overlay/upper/usr/lib/opkg/info/kmod-usbip.control
./overlay/upper/usr/lib/opkg/info/kmod-usbip-server.prerm
./overlay/upper/usr/lib/opkg/info/kmod-usbip-client.postinst
./overlay/upper/usr/lib/opkg/info/kmod-usbip.list
./overlay/upper/usr/lib/opkg/info/kmod-usbip-client.prerm
./overlay/upper/usr/lib/opkg/info/kmod-usbip-server.list
./overlay/upper/usr/lib/opkg/info/kmod-usbip-server.postinst
./overlay/upper/usr/lib/opkg/info/kmod-usbip-client.control
./overlay/upper/usr/lib/opkg/info/kmod-usbip.postinst
./overlay/upper/usr/lib/opkg/info/kmod-usbip.prerm
./overlay/upper/usr/lib/opkg/info/kmod-usbip-server.control
./overlay/upper/usr/lib/opkg/info/kmod-usbip.postinst-pkg
./overlay/upper/usr/lib/opkg/info/kmod-usbip-client.postinst-pkg
./overlay/upper/usr/lib/opkg/info/kmod-usbip-client.list
./sys/bus/usb/drivers/usbip-host
./sys/devices/platform/vhci_hcd/usbip_debug
./sys/module/usbip_core
./sys/module/usbip_core/parameters/usbip_debug_flag
./sys/module/usbip_core/holders/usbip_host
./sys/module/usbcore/holders/usbip_host
./sys/module/usbip_host
./sys/module/usbip_host/drivers/usb:usbip-host
./usr/lib/opkg/info/kmod-usbip-server.postinst-pkg
./usr/lib/opkg/info/kmod-usbip.control
./usr/lib/opkg/info/kmod-usbip-server.prerm
./usr/lib/opkg/info/kmod-usbip-client.postinst
./usr/lib/opkg/info/kmod-usbip.list
./usr/lib/opkg/info/kmod-usbip-client.prerm
./usr/lib/opkg/info/kmod-usbip-server.list
./usr/lib/opkg/info/kmod-usbip-server.postinst
./usr/lib/opkg/info/kmod-usbip-client.control
./usr/lib/opkg/info/kmod-usbip.postinst
./usr/lib/opkg/info/kmod-usbip.prerm
./usr/lib/opkg/info/kmod-usbip-server.control
./usr/lib/opkg/info/kmod-usbip.postinst-pkg
./usr/lib/opkg/info/kmod-usbip-client.postinst-pkg
./usr/lib/opkg/info/kmod-usbip-client.list
I spend much time to figure out the solution. And in the end, doubt was correct. The installer ipk from release branch, as mentioned in query post, does not have user space binaries.
Solution: To get rid of it, I took complete source from official openwrt
- `git clone https://github.com/openwrt/openwrt`
- `make menuconfig`
- *Enabling from menuconfig*
- `networking->usbip` `networking->usbip-client` and `networking->usbip-server`
And after compiling I got two binaries in sbin
/usr/sbin/usbip
/usr/sbin/usbipd
Which was needed and I was looking for. It works perfectly now.
Related
I just copy the code from the example on nim's offical documentation:
import std/locks
var
thr: array[0..4, Thread[tuple[a,b: int]]]
L: Lock
proc threadFunc(interval: tuple[a,b: int]) {.thread.} =
for i in interval.a..interval.b:
acquire(L) # lock stdout
echo i
release(L)
initLock(L)
for i in 0..high(thr):
createThread(thr[i], threadFunc, (i*10, i*10+5))
joinThreads(thr)
deinitLock(L)
$ nimble build --threads:on
Verifying dependencies for thread#0.1.0
Building thread/thread.exe using c backend
$ .\thread
then thread.exe crashed...
thread.exe
0.0.0.0
630c5e83
libwinpthread-1.dll
6.3.9600.20512
62cdfc6e
c0000135
00000000000ed1b0
1fc8
01d8bb71e28918ba
F:\MyProjects\Nim\thread\thread.exe
libwinpthread-1.dll
2044d161-2765-11ed-827a-6c86063c07b4
I have no ideas about it...Can anybody help me? Thanks a lot.
Gave it a try in Windows 8.1, it does fail.
Apparently is a recent regression in nim you can make it work if you compile it with --threads:on --tlsEmulation:on (or make sure mingw binaries is on your PATH).
We've installed Sybase 16 Express in our Linux box, it was able to startup right after the installation. When we recently try restarting it with the startserver -f RUN_FILE command, it failed to find the libsapcrypto.so file.
~/sap/ASE-16_0/bin> ../sap/ASE-16_0/bin/dataserver: error while loading shared libraries: libsapcrypto.so: cannot open shared object file: No such file or directory
We searched this file, multiple matches presented in the following paths:
./DM/OCS-16_0/lib3p/libsapcrypto.so
./DM/OCS-16_0/lib3p64/libsapcrypto.so
./DM/OCS-16_0/devlib3p64/libsapcrypto.so
./DM/OCS-16_0/devlib3p/libsapcrypto.so
./DM/REP-16_0/lib64/libsapcrypto.so
./DataAccess/ODBC/lib/libsapcrypto.so
./DataAccess64/ODBC/lib/libsapcrypto.so
./OCS-16_0/lib3p/libsapcrypto.so
./OCS-16_0/lib3p64/libsapcrypto.so
./OCS-16_0/devlib3p64/libsapcrypto.so
./OCS-16_0/devlib3p/libsapcrypto.so
Since this hasn't been answered yet, running this command worked for me:
. /opt/sap/SYBASE.sh
Note the different syntax to make sure the environment variables are set in the terminal session, as opposed to using this syntax:
/opt/sap/SYBASE.sh
I'm trying to run go build command for my project but it exits with below error.
alpha#GHOST-RIDER:~/GoWorkspace/src/github.com/hyperledger/firstproject$ go build
# github.com/hyperledger/fabric-sdk-go/internal/github.com/hyperledger/fabric/core/operations
../fabric-sdk-go/internal/github.com/hyperledger/fabric/core/operations/system.go:227:23: not enough arguments in call to s.statsd.SendLoop
have (<-chan time.Time, string, string)
want (context.Context, <-chan time.Time, string, string)
Any help would be appreciated.
As per code fabric is using the different version of this library: github.com/go-kit/kit/metrics/statsd. If you follow the System struct's statsd attribute, you can reach the reference on imports.
In master branch of this lib, SendLoop function requires 4 attributes, so that's the root cause. So this causes error when you compile on your local environment.
I had the same issue and worked around it by checking out a tag of library as below:
cd $GOPATH/src/github.com/go-kit/kit
git fetch --tags
git checkout v0.8.0
found a solution on the hyperledger-fabric-go-sdk group chat.
Add context.Background() in s.statsd.SendLoop like below
s.statsd.SendLoop(context.Background(), s.sendTicker.C, network, address)
in fabric-sdk-go/internal/github.com/hyperledger/fabric/core/operations/system.go file at line 227.
I had a same issue, my solution worked and don't need edit fabric source code.
specify github.com/go-kit/kit to v0.8.0, modify go.mod:
replace github.com/go-kit/kit => github.com/go-kit/kit v0.8.0 // you specific version
require (
... ...
// Maybe other version, go mod tidy update automatically, don't care it.
github.com/go-kit/kit v0.9.0 // indirect
... ...
)
then it worked.
I used the method described here to install Seaside3 on Pharo. All is well, but Scriptaculous doesn't come preinstalled. How do I get it?
Seaside3 :
1: Go to the configuration manager
2: Select the Seaside 3 configuration. Click on Install.
3: Wait while it loads. Takes a couple of minutes on an i7 and a decent network link.
4: Open a Workspace and start a ZincServerAdaptor on the port you like (here 8080):
ZnZincServerAdaptor startOn: 8080. (then CMD+d for Do It)
7: Access Seaside from your browser.
8: Install Scriptaculous, but how?
Johan B's input:
http://forum.world.st/Seaside-How-do-I-install-Scriptaculous-on-a-clean-Seaside-install-via-Configuration-Browser-on-Pharo-td4802930.html
Pharo’s Configuration browser loads the default group of the Metacello configuration, which unfortunately was set to ‘Core’ for Seaside 3.1.
So, you will need to load additional groups programmatically:
(ConfigurationOfSeaside3 project version: #stable) load: #('Scriptaculous' 'JSON')
If you want to get the list of possible groups to load, inspect:
(ConfigurationOfSeaside3 project version: #stable) groups
Install from scratch with:
(ConfigurationOfSeaside3 project version: #stable) load: #('default' 'Scriptaculous' 'JSON')
This is something we fixed for Seaside 3.2, where the default will load everything to help newcomers.
We prefer not to change the existing 3.1 configuration versions to not break existing uses, but it’s fixed in the upcoming version.
Btw, Scriptaculous is really outdated. You will prefer to use jQuery and jQuery-UI (or any other JS framework…)
My findings on the subject:
Well, finally figured it out.
The packages needed for Scriptaculous to work are listed in the book here:
http://book.seaside.st/book/web-20/scriptaculous/frameworks/installation
Then you need to find a repository to get them from, after a little poking around here:
http://www.smalltalkhub.com/mc/Seaside/
I chose the Seaside31 repository, which is what I apparently managed to install a few hours ago.
http://www.smalltalkhub.com/mc/Seaside/Seaside31/main
Then I had to Do-It a couple of times on (maybe there is a faster way to do this):
Gofer new
url:'http://www.smalltalkhub.com/mc/Seaside/Seaside31/main';
package: 'Javascript-Core';
load.
Gofer new
url:'http://www.smalltalkhub.com/mc/Seaside/Seaside31/main';
package: 'Prototype-Core';
load.
Gofer new
url:'http://www.smalltalkhub.com/mc/Seaside/Seaside31/main';
package: 'Scriptaculous-Core';
load.
Gofer new
url:'http://www.smalltalkhub.com/mc/Seaside/Seaside31/main';
package: 'Scriptaculous-Components';
load.
For those looking to install jQuery into Seaside can use these:
Gofer new
url:'http://www.smalltalkhub.com/mc/Seaside/Seaside31/main';
package: 'Javascript-Core';
load.
Gofer new
url:'http://www.smalltalkhub.com/mc/Seaside/Seaside31/main';
package: 'JQuery-Core';
load.
Gofer new
url:'http://www.smalltalkhub.com/mc/Seaside/Seaside31/main';
package: 'JQuery-UI'; "notice that there is no -Core on this one, I don't know why"
load.
If one wants to load a full fledged configuration in Pharo 4.0 (after having loaded Seaside from the configuration browser):
| config groups |
config := (ConfigurationOfSeaside3 project version: #release3).
"Inspect this in case you want to see what's available"
groups := config groups.
"Load the usual suspects"
config load: #('OneClick' 'Javascript' 'Javascript Tests' 'JQuery' 'JQuery Tests' 'JQueryUI' 'JQueryUI Tests' 'JQueryUI Examples' 'REST' 'REST Tests' 'JSON' 'JSON Tests').
An additional interesting configuration to load is Bootstrap.
Check the configuration browser.
I have been trying to get 1.50 or 1.40 ANSICON (https://github.com/adoxa/ansicon) working and have looked at sooooo many pages telling about how to install this:
http://blog.mmediasys.com/2010/11/24/we-all-love-colors/
http://carol-nichols.com/2011/03/the-system-cannot-find-the-path-specified/
etc....
So, I have my AutoRun set to "C:\usr\bin\ansi140\x64\ansicon.exe" -p and I also testing 150 but there was zero change.
My entire team has this working with no issues but I cannot get this to work.. I still get the garbled junk on the command prompt:
Scenario: Residential caller chooses to hear payment locations closest to home and there are 3 locations available which are in a 25 miles radius.?[90m #
features\payment_locations.feature:5?[0m
?[32mGiven the call flow is '?[32m?[1mDivisional?[0m?[0m?[32m'?[90m
# features/step_definitions/common_steps.rb:5?[0m?[0m
?[32mAnd the ani is '?[32m?[1m6101234572?[0m?[0m?[32m'?[90m
# features/step_definitions/common_steps.rb:9?[0m?[0m
?[32mAnd the dnis is '?[32m?[1m9?[0m?[0m?[32m'?[90m
# features/step_definitions/common_steps.rb:13?[0m?[0m
?[31mWhen the call is started?[90m
# features/step_definitions/common_steps.rb:17?[0m?[0m
?[31m Connection refused - Connection refused (Errno::ECONNREFUSED)?[0m
?[31m org/jruby/ext/socket/RubyTCPSocket.java:121:in `initialize'?[0m
?[31m org/jruby/RubyIO.java:864:in `new'?[0m
?[31m org/jruby/ext/socket/RubyTCPSocket.java:147:in `open'?[0m
?[31m c:/usr/bin/jruby-1.6.4/lib/ruby/1.8/net/http.rb:560:in `connect'?[0m
?[31m org/jruby/ext/Timeout.java:79:in `timeout'?[0m
?[31m c:/usr/bin/jruby-1.6.4/lib/ruby/1.8/net/http.rb:560:in `connect'?[0m
?[31m c:/usr/bin/jruby-1.6.4/lib/ruby/1.8/net/http.rb:553:in `do_start'?[0m
?[31m c:/usr/bin/jruby-1.6.4/lib/ruby/1.8/net/http.rb:548:in `start'?[0m
?[31m org/jruby/RubyKernel.java:2100:in `send'?[0m
?[31m ./features/support/request_helper.rb:12:in `request'?[0m
?[31m ./features/support/request_helper.rb:4:in `get'?[0m
?[31m ./features/step_definitions/common_steps.rb:22:in `(root)':in `/^the call is started$/'?[0m
?[31m features\payment_locations.feature:9:in `When the call is started'?[0m
Can anyone PLEASE help me try to understand why I am having this issue when the rest of my team with the same laptops are not having this issue?
EDIT from first comment:
I tried what you asked and ende dup with this tab setting:
<tab title="ANSICON" icon="linux.ico" use_default_icon="0">
<console shell="C:\usr\bin\ansi150\x64\ansicon.exe" init_dir="C:\usr\git_workspaces\d2" run_as_user="0" user=""/>
<cursor style="0" r="255" g="255" b="255"/>
<background type="0" r="0" g="0" b="0">
<image file="" relative="0" extend="0" position="0">
<tint opacity="0" r="0" g="0" b="0"/>
</image>
</background>
</tab>
But the issue still persists
?[0m ?[36m <catch event="error">
?[0m ?[36m <submit next="/d2/exception/handleVoiceBrowserError.vxml" namelist="_event _message" />
?[0m ?[36m </catch>
?[0m ?[36m
?[36m</vxml>?[0m
?[32mThen play the payment locations?[90m
# features/step_definitions/billing_steps.rb:360?[0m?[0m
?[32mThen caller hangs up the phone?[90m
# features/step_definitions/goodbye_steps.rb:1?[0m?[0m
1 scenario (?[32m1 passed?[0m)
32 steps (?[32m32 passed?[0m)
0m10.302s
I also seem to have the term-ansicolor gem so this should be working
*** LOCAL GEMS ***
atoulme-Antwrap (0.7.1 java)
bouncy-castle-java (1.5.0146.1)
builder (2.1.2)
buildr (1.4.6 java)
buildr-xivr (0.0.6, 0.0.4)
bundler (1.0.20)
crack (0.1.8)
cucumber (1.0.0, 0.10.2)
diff-lcs (1.1.2)
gherkin (2.4.21 java, 2.4.16 java, 2.3.8 java)
highline (1.5.1)
hoe (2.3.3)
hpricot (0.8.3 java)
httparty (0.7.8, 0.7.7)
jruby-openssl (0.7.5, 0.7.4)
jruby-win32ole (0.8.5)
json (1.6.5 java, 1.5.4 java, 1.5.1 java)
json_pure (1.4.3)
mechanize (1.0.0)
minitar (0.5.3)
net-scp (1.0.4)
net-sftp (2.0.4)
net-ssh (2.0.23)
nokogiri (1.5.0 java, 1.5.0.beta.4 java)
rake (0.8.7)
rspec (2.1.0, 1.3.2)
rspec-core (2.1.0)
rspec-expectations (2.1.0)
rspec-mocks (2.1.0)
rubyforge (2.0.3)
rubygems-update (1.8.10)
rubyzip (0.9.4)
sources (0.0.1)
term-ansicolor (1.0.7, 1.0.6, 1.0.5)
xml-simple (1.0.12)
but it is not. Neither on Cygwin nor CMD.
The plot thickens
Using ansicon worked. Additionally, you may want to check out Console2 for an excellent multi-tabbed console.
Extract ansi152/x64 into <console-install-dir>, say C:\Apps\Console
Configure console to run with different shells, ie. powershell, cmd, gitbash
Run ansicon -i from <console-install-dir>, in console.
PS. You may need to add console-install-dir into your $env:path.
To fix ansicon installation,
Grab Console2, extract, to a folder, mine C:\Applications\.
Extract files from ansi150.zip\x64, use 64-bit binaries, place it in a same folder with Console2.
Open C:\Applications\Console2\Console.exe.
From Console2 menu open File > Edit > Settings > Tabs, fill in Shell with C:\Applications\Console2\ansicon.exe, or browse to it. Click Ok.
To apply changes reopen a Console2 tab.
My setup is Console-2.00b148-Beta_64bit.zip and ansi150.zip on Win 7 64-bit (without editing AutoRun registry).
I had this problem myself and I am finally seeing colored output.
I followed these steps:
Download "https://github.com/downloads/adoxa/ansicon/ansi150.zip"
Copy the files under the "x64" directory to somewhere in your path.
For example, you can copy them to "c:\windows\system32".
Download "https://github.com/downloads/adoxa/ansicon/ansi6432.zip"
Copy the files under the "x64" directory to the same location you used in step #2.
This should overwrite ANSI32.DLL and ansicon.exe
Install ansicon by typing "ansicon -I" at a command prompt
You should now see colored output.
Make sure to enable logging by setting the environment variable ANSICON_LOG:
set ANSICON_LOG=3
This should log output to %TEMP%\ansicon.log (Usually "c:\temp\ansicon.log")
I just found out that we need to set this:
set ANSICON_EXC=nvd3d9wrap.dll
(add it to a ansicon.bat file, or set an environment variable). Works like a champ with win64x pro, ansicon164