when i'm edit a file using
sudo -e [name of file] and then i want to save and close, how to do that?
For example, when it's nano..i press ctrl key and x to save and close.
please, help me
The best tools to edit files on Centos are vi and vim. Open the desired file with one of those, press i to edit, press ESC to exit edit mode and press ZZ (capital Zs) to save.
Hope this helps.
Related
I have to edit multiple lines in a given file in linux.
Currently i am using sed and awk to edit my configurations file inline.
I tried using sed and awk, both work fine.
But I wanted to know if there are anymore options/command to do the same?
I am new to linux. Appreciate your help!
You can use nano cmd to edit your file simply.
To open a file, pass the filename as an argument:
nano ~/public_html/index.html
You can also open files at a specific line or column number:
nano +LINE /path/to/file
nano +LINE,COLUMN /path/to/file
To open a file as read only:
nano -v myfile
To search for text in a document, use ^W. This will open a search prompt and a submenu of search-related commands.
^G Get Help
^Y First Line
^T Go To Line
^W Beg of Par
M-J FullJstify
M-B Backwards
^C Cancel
^V Last Line
^R Replace
^O End of Par
M-C Case Sens
M-R Regexp
To save your work, use ^O or “WriteOut”. This will save the document and leave nano open for you to continue working.
Use ^X to exit nano. If you have not saved your work, you will be prompted to save the changes or cancel the exit routine.
If Nano cmd is not supporting in your OS run above cmd:
For Debian/Ubuntu:
apt install nano
For CentOS/Fedora:
yum install nano
For More Information visit this link What is Nano Command
I'm using Linux mint and using the vi command to create text files, now that I created a text file and saved it. How do I get back into to edit the text file again?
vi helloWorld.txt
Try this command:
sudo gedit helloWorld.txt
it, will open up a text editor to edit your file.
OR
sudo nano helloWorld.txt
Here, you can edit your file in the terminal window.
Open the file again using vi. and then press " i " or press insert key ,
For save and quit
Enter Esc
and write the following command
:wq
without save and quit
:q!
Open the file again using vi. and then press the insert button to begin editing it.
If you are still inside the vi editor, you might be in a different mode from the one you want. Hit ESC a couple of times (until it rings or flashes) and then "i" to enter INSERT mode or "a" to enter APPEND mode (they are the same, just start before or after current character).
If you are back at the command prompt, make sure you can locate the file, then navigate to that directory and perform the mentioned "vi helloWorld.txt". Once you are in the editor, you'll need to check the vi reference to know how to perform the editions you want (you may want to google "vi reference" or "vi cheat sheet").
Once the edition is done, hit ESC again, then type :wq to save your work or :q! to quit without saving.
For quick reference, here you have a text-based cheat sheet.
You can open the file again using vi helloworld.txt and then use cat /path/your_file to view it.
you doesn't have root access type this
sudo su
If you want to use nano editor to create file in same directory where you headed
nano filename.format
eg:- nano attendaence.txt
Ctrl+o
Enter
Ctrl+x
If you want to use nano editor to create file in other directory where you headed
nano location/filename.txt
eg1:- nano home/ec2-user/public_html/attendence.php
eg2:- nano /home/ec2-user/public_html/attendence.php
2. Ctrl+o
3. Enter
4. Ctrl+x
Create file without editor in same directory
touch filename.format
eg:- touch helloworld.html
Create file without editor in another directory
touch location/filename.format
eg:- touch var/www/index.html
I have had several Debian servers and always edited cronjobs in this way:
crontab -e
and
Ctrl+x
Just got a new server and can not do it in this way anymore.
When I enter crontab -e, the file opens but I can't write anything. I can move cursor up and down but can't write. I even can not exit from this file because Ctr+x doesn't work.
When I open a file there is some information and the rest empty lines contain tildes ~ in the beginning of each line.
Any ideas how can I edit this file?
Thanks.
You need to turn on insert mode. After entering crontab -e, press i to turn on insert, enter your full line, press esc to finish entering, and then hold down shift and press z twice to save the file. This is how I managed to do it in vi/vim
As one other person has suggested, vim is obviously the default editor on your new server. You can test this by running
EDITOR=pico crontab -e
Substituting whatever is your actual preferred editor (sounds like it may be nano or pico). If that works, you should try one of the following:
edit your login script to set that environment variable on login (sets the editor just for that user)
Make sure your favourite editor is is installed and run the following (as root): update-alternatives --config sensible-editor
You can then choose the default editor for all users (they can override it individually by doing option 1).
~ would suggest that you are now editing your crontab using vi/vim instead of your usual editor
so Ctrl-X wont work, try Esc :wq
Do you have the right permissions? maybe you should open it as root user if not.
check it doing this:
ls -all $(which crontab)
if not you can change them..take a look here too..maybe you find something more!
hope it helps.
I'm pretty new to shell scripting and linux in general. Basically, I need to change the configuration file for logging out so that when a user logs out, a certain shell script is run.
Now, I've located the logout configuration file and opened it with vi using this command
$ vi ~/.bash_logout
At this point, I'm experiencing some very weird behavior. When I try to type a character, the cursor jumps around seemingly erratically. What could this be due to? I'm running the latest version of ubuntu.
And once I get that figured out, what's the command to run a .sh file from within this configuration file?
If you're having trouble with vi, try using nano instead. nano .bash_logout
If you do need to use vi for some reason, "i" will put the editor into insert mode, and ESC will take it out of insert mode when you're done. ":wq" will write and quit the editor.
To run a command, just put it in the .bash_logout file as you would type it on the commandline.
Some other useful commands:
a insert after selected character
o insert at next line
O insert at previous line
r replace a single character
R replace mode
:q! quit without saving
:w save
:wq save and quit
To get familiar with Vi and its brother Vim ("VI improved") I recommend the book "A Byte of Vim", you can read it online or download for free at http://www.swaroopch.com/notes/Vim
You can permanently change your editor option. To find out what your current one is, type this:
export | grep -i edit
To change it on Ubuntu:
sudo update-alternatives –config editor
On any other BASH prompt, just do this:
export EDITOR="nano"
Replace 'nano' with 'vi', 'emacs', or any other preferred editor. You can also add this to your .bashrc by typing the following:
echo 'EDITOR="nano"' >> ~/.bashrc
Problem: to have a keyboard shortcut to google a current selection in Screen's copy mode from terminal to Firefox
You can copy the sentence to Screen's clipboard in copy-mode by pressing enter. However, I want to be able to press g to put the Screen's clipboard to the command below as the first parameter:
#!/bin/sh
q=$1
open "http://www.google.com/search?q=$q"
I do the same at the moment by
C-a Esc [select the area] enter
C-z [to put the current window out of the way]
google C-a ]
How can you put Screen's clipboard to the command?
Here's a description of how someone modified their .screenrc file to sync it with the X clipboard. You might try modifying it to send the selected text to Firefox instead of xsel.
open "http://www.google.com/search?q=`xclip -o`"
This works on X's copy buffer rather than Screen's but the X clipboard is usually what you want since it is set by simply highlighting text.
I'm still trying to work out the exact syntax but take a look at using 'bind' with 'writebuf' (and possibly 'eval') within your .screenrc file.
EDIT
You can bind keys in the .screenrc file in your home directory. E.g.,
bind g eval 'writebuf' 'exec . /bin/sh/ -c "cp /tmp/screen-exchange ~/foo.txt"'
This runs the eval command when you use the g key in screen. Eval takes any number of arguments and runs them as a Tcl script.
writebuf dumps your screen copy/paste buffer into a file at /tmp/screen-exchange.
The second string starts with exec which will run a program external to the Tcl interpreter. In this case, I choose /bin/sh (a *nix shell) and pass an arbitrary system command. The example above copies the /tmp/screen-exchange file but you might:
open < /tmp/screen-exchange
Once the line has been added to ~/.screenrc, restart screen, copy some text and try
C-a g