I have text like this:
w ky,
wyz,
wyy,
wj,
w w,
and I want to change it to this:
"w ky",
"wyz",
"wyy",
"wj",
"w w",
I do it now using:
record a macro to insert double quota in one line, then go to next line qa0wi"$i"j
then just type 4#a
Yes, it works, but is there an easier way to do this?
There is an easier way. You can use the norm command. I would recommend this:
Visually select all of the lines
Type
:norm I"<C-v><esc>$i"<cr>
When you actually type this (before hitting enter), the text that should be shown in your command line is:
:'<,'>norm I"^[$i"
The norm command tells vim to simulate a set of normal mode keystrokes on certain lines. In this case, the command is:
:'<,'> " On every line in the visual selection:
norm " Do the following as if typed in normal mode:
I"<esc>$i" " Insert an '"', escape, then insert a '"' at the end (before the comma)
You can also do this without using a visual selection, by typing <n>:norm ..., and the command will apply the current n lines. (the current line and the next n-1 lines)
Doing a "very magic search \v" we can search...
\v(\w ?\w+),
\v ........... starts very magic search mode
( ........... starts group one
\w ........... any word
? ........... optional space
+ ........... one or more
) ........... ends group one
After testing the search we can pass into our command or
use the last search by placing two slashes on the search pattern
%s/\v(\w ?\w+),/"\1",/g
%s//"\1",/g
everything matched on group one can be referred by \1.
Do a basic multi-line edit at the front then do a string replace on , with ",.
Related
I want to wrap some code :
myObj.text;
with a function call where the code is passed as an argument.
console.log(myObj.text);
I've thought about using surround.vim to do that but didn't manage to do it.
Any idea if it's possible ? I
With Surround in normal mode:
ysiwfconsole.log<CR>
With Surround in visual mode:
Sfconsole.log<CR>
Without Surround in normal mode:
ciwconsole.log(<C-r>")<Esc>
Without Surround in visual mode:
cconsole.log(<C-r>")<Esc>
But that's not very scalable. A mapping would certainly be more useful since you will almost certainly need to do it often:
xnoremap <key> cconsole.log(<C-r>")<Esc>
nnoremap <key> ciwconsole.log(<C-r>")<Esc>
which brings us back to Surround, which already does that—and more—very elegantly.
I know and use two different ways to accomplish this:
Variant 1:
Select the text you want to wrap in visual mode (hit v followed by whatever movements are appropriate).
Replace that text by hitting c, then type your function call console.log(). (The old text is not gone, it's just moved into a register, from where it will be promptly retrieved in step 3.) Hit <esc> while you are behind the closing parenthese, that should leave you on the ) character.
Paste the replaced text into the parentheses by hitting P (this inserts before the character you are currently on, so right between the ( and the )).
The entire sequence is v<movement>c<functionName>()<esc>P.
Variant 2:
Alternatively to leaving insert mode and pasting from normal mode, you can just as well paste directly from insertion mode by hitting <ctrl>R followed by ".
The entire sequence is v<movement>c<functionName>(<ctrl>R")<esc>.
You can use substitution instruction combined with visual mode
To change bar to foo(bar):
press v and select text you want (plus one more character) to surround with function call (^v$ will select whole text on current line including the newline character at the end)
type :s/\%V.*\%V/foo\(&\)/<CR>
Explanation:
s/a/b/g means 'substitute first match of a with b on current line'
\%V.*\%V matches visual selection without last character
& means 'matched text' (bar in this case)
foo\(&\) gives 'matched text surrounded with foo(...) '
<CR> means 'press enter'
Notes
For this to work you have to visually select also next character after bar (^v$ selects also the newline character at the end, so it's fine)
might be some problems with multiline selections, haven't checked it yet
when I press : in visual mode, it puts '<,'> in command line, but that doesn't interfere with rest of the command (it even prevents substitution, when selected text appears also somewhere earlier on current line) - :'<,'>s/... still works
In Vim, I have the following text:
key => value1
key => value2
key => value1111
key => value12
key => value1122222
I would like to add "," at the end of each line. The previous text will become the following:
key => value1,
key => value2,
key => value1111,
key => value12,
key => value1122222,
Does anyone know how to do this? Is it possible to use visual block mode to accomplish this?
This will do it to every line in the file:
:%s/$/,/
If you want to do a subset of lines instead of the whole file, you can specify them in place of the %.
One way is to do a visual select and then type the :. It will fill in :'<,'> for you, then you type the rest of it (Notice you only need to add s/$/,/)
:'<,'>s/$/,/
There is in fact a way to do this using Visual block mode. Simply pressing $A in Visual block mode appends to the end of all lines in the selection. The appended text will appear on all lines as soon as you press Esc.
So this is a possible solution:
vip<C-V>$A,<Esc>
That is, in Normal mode, Visual select a paragraph vip, switch to Visual block mode CTRLV, append to all lines $A a comma ,, then press Esc to confirm.
The documentation is at :h v_b_A. There is even an illustration of how it works in the examples section: :h v_b_A_example.
Another solution, using another great feature:
:'<,'>norm A,
See :help :normal.
ex mode is easiest:
:%s/$/,
: - enter command mode
% - for every line
s/ - substitute
$ - the end of the line
/ - and change it to
, - a comma
The substitute command can be applied to a visual selection. Make a visual block over the lines that you want to change, and type :, and notice that the command-line is initialized like this: :'<,'>. This means that the substitute command will operate on the visual selection, like so:
:'<,'>s/$/,/
And this is a substitution that should work for your example, assuming that you really want the comma at the end of each line as you've mentioned. If there are trailing spaces, then you may need to adjust the command accordingly:
:'<,'>s/\s*$/,/
This will replace any amount of whitespace preceding the end of the line with a comma, effectively removing trailing whitespace.
The same commands can operate on a range of lines, e.g. for the next 5 lines: :,+5s/$/,/, or for the entire buffer: :%s/$/,/.
:%s/$/,/g
$ matches end of line
If you want to add ',' at end of the lines starting with 'key', use:
:%s/key.*$/&,
I have <M-DOWN>(alt down arrow) mapped to <DOWN>. so that I can repeat the last command on a series of lines very quickly. with this mapping I can:
A,<ESC>
And then hold alt while pressing down repeatedly to append the comma to the end of each line.
This works well for me because it allows very good control over what lines do and do not get the change.
(I also have the other arrows mapped similarly to allow for easy repeating of .)
Here's the mapping line to paste into your vimrc:
map <M-DOWN> <DOWN>.
Following Macro can also be used to accomplish your task.
qqA,^[0jq4#q
I have the following expression in a latex file
\begin{dfn} \tag{Diagram $𝗗$ over a trisp $\Delta$}
\label{dfn:Diagram D over a trisp Delta}
now i want to substitute all the spaces in the brackets on the second line with :.
my idea was to visual select the expression by v% while being on one of the brackets and then :s/\ /:/g but this replaces all whitespaces and results in
::::::::::::::\label{dfn:Diagram:𝗗:over:a:trisp:Delta}
which results in the task of removing the : before the \label{…}
as vim is a very powerful editor - there should be an easier way, that I don't know yet.
Go to the first {, press v, press %. This will visually select the text between { and }. Then press : and enter s/\%V\ /:/g in your minibar. See this for explanation:
http://vim.wikia.com/wiki/Search_and_replace_in_a_visual_selection
Note that otherwise g will replace all on the current line.
I'm hand-editing CNC Gcode text files and need a way to reference locations in the file and on the toolpath.
I want to modify every line in the text file so that it begins with the the upper case letter N followed by the line number, incremented in tens for each successive line, then a whitespace followed by the original text on that line. How can I do this in Vim?
I'm not sure about vi, but (since you're using the vim tag) Vim allows you to accomplish your task as follows:
Adjust the first line by hand (insert a N10 at the beginning of the line), then put the cursor at the beginning of the next line.
Press qb to start recording a macro (the b names the register used to store the macro; feel free to use a different letter -- and definitely do use a different letter if you've got something useful stashed away in b).
Move the cursor upward to the beginning of the previous line (which you have adjusted by hand). Press v to start visual selection mode, then f to move the cursor to the next space on the line (if you use a single space as your whitespace separator, that is; adjust this step if you're using a tab or multiple spaces).
Press y to yank the selected text. This will also remove the visual selection.
Move the cursor to the beginning of the next line. Press P to insert the previously yanked text before the cursor, that is, on the very beginning of the line.
Move the cursor to the numeric part of the line header. Press 10 C-a (1, 0, control + A) to increment that number by 10.
Move the cursor to the beginning of the next line. Press q to stop recording the macro.
Press 10000000 #b to execute the macro 10000000 times or until it hits the end of the file. This should be enough to take care of all the lines in your file, unless it is really huge, in which case use a bigger number.
...or use Vim to write a simple script to do the job in whichever language you like best, then run it from a terminal (or from withing Vim with something like :!./your-script-name). ;-)
The following command will prepend ‘N<line number * 10>’ to every line:
:g/^/exe 'normal! 0iN' . (line('.')*10) . ' '
You can do it easily in Vim with this:
:%s/^/\=line(".")*10 . " "/
This replaces the start of every line with the result of an expression that gives the line number times ten, followed by a space.
I have not timed it, but I suspect it might be noticeably faster than the other Vim solutions.
Cheating answer:
:%!awk '{print "N" NR "0", $0}'
There are two ways to implement that without resorting to external
tools: via a macro or by using Vimscript. In my opinion, the first way
is a little cumbersome (and probably not as effective as the solution
listed below).
The second way can be implemented like this (put the code into your
.vimrc or source it some other way):
function! NumberLines(format) range
let lfmt = (empty(a:format) ? 'N%04d' : a:format[0]) . ' %s'
for lnum in range(a:firstline, a:lastline)
call setline(lnum, printf(lfmt, lnum, getline(lnum)))
endfor
endfunction
The NumberLines function enumerates all lines of the file in a given
range and prepends to each line its number according to the provided
printf-format (N%04d, by default).
To simplify the usage of this function, it is convenient to create
a command that accepting a range of lines to process (the whole file,
by default) and a optional argument for the line number format:
command! -range=% -nargs=? NumberLines <line1>,<line2>call NumberLines([<f-args>])
Say I have ten lines and I want to prepend text to some word that occurs in those lines? It does not have to be at the beginning of the line.
From:
sdfsd foo sdfsd
sfsd foo fsdf
sdfsdf foo sdfsdf
to:
sdfsd bar(foo sdfsd
sfsd bar(foo fsdf
sdfsdf bar(foo sdfsdf
Is it also possible to not only prepend the bar( but actually surround foo with bar(foo)?
I would also like a quick way to append // comments to multiple lines (C-style comments).
I use Vim/GVim 7.2.
Go to the first foo, press Ctrl-v to enter visual block mode and press down until all the lines with foo are marked. Then press Shift-i to insert at the beginning (of the block). When you are finished and press Esc, the inserted characters will be added to each line at the left of the marked block.
To insert at the end, press again Ctrl-v, move up/down to mark all affected lines and then press End or $ to extend the selection until the end of the lines. Now you can press Shift-a to append at the end of all the lines, just like previously with Shift-i.
The visual selection can also be done with normal movement commands. So to comment a whole block in C you could move to the opening brace and type Ctrl-v % Shift-i // Esc.
To answer your first question, the below
:%s/foo/bar(&)/g
will look for foo, and surround the matched pattern with bar(). The /g will do this multiple times in one line.
Since you're just matching foo, you could do a simple :s/foo/bar(foo)/g. The above will work, however, if you decide to match on a regular expression rather than a simple word (e.g. f[a-z][a-z]). The '&' in the above represents what you've matched.
To prefix a set of lines I use one of two different approaches:
One approach is the block select (mentioned by sth). In general, you can select a rectangular region with ctrl-V followed by cursor-movement. Once you've highlighted a rectangle, pressing shift-I will insert characters on the left side of the rectangle, or shift-A will append them on the right side of the rectangle. So you can use this technique to make a rectangle that includes the left-most column of the lines you want to prefix, hit shift-I, type the prefix, and then hit escape.
The other approach is to use a substitution (as mentioned by Brian Agnew). Brian's substitution will affect the entire file (the % in the command means "all lines"). To affect just a few lines the easiest approach is to hit shift-V (which enables visual-line mode) while on the first/last line, and then move to the last/first line. Then type:
:s/^/YOUR PREFIX/
The ^ is a regex (in this case, the beginning of the line). By typing this in visual line mode you'll see '<,'> inserted before the s automatically. This means the range of the substitution will be the visual selection.
Extra tip: if your prefix contains slashes, you can either escape them with backslash, or you can use a different punctuation character as the separator in the command. For example, to add C++ line comments, I usually write:
:s:^:// :
For adding a suffix the substitution approach is generally easier unless all of your lines are exactly the same length. Just use $ for the pattern instead of ^ and your string will be appended instead of pre-pended.
If you want to add a prefix and a suffix simultaneously, you can do something like this:
:s/.*/PREFIX & SUFFIX/
The .* matches the whole line. The & in the replacement puts the matched text (the whole line) back, but now it'll have your prefix and suffix added.
BTW: when commenting out code you'll probably want to uncomment it later. You can use visual-block (ctrl-V) to select the slashes and then hit d to delete them, or you can use a substitution (probably with a visual line selection, made with shift-V) to remove the leading slashes like this:
:s:// ::
:normal to the rescue!
:%norm Wibar(
:%norm WEa)
:norm(al) replays the commands as if you had typed them:
W - goes to the next word
i - starts insertion mode
bar( - types the sequence 'bar('
Or in one line:
:%norm Wibar(ctrlvESCEa)
If you're running Windows then type ctrlq instead of ctrlv.
Yet another possibility (probably not-so-useful in your test case, but handy in other situations) is to cordon off the area you want to change with marks.
Put the cursor anywhere in the top line and press 'a
Put the cursor anywhere in the last line and press 'b
Issue the command :'a,'b s/foo/bar(&)/
I usually like visual block mode if everything is visible on the screen, and I usually prefer marks if the start and stop are separated by many screens.
Another simple regular expression is:
%s/^/<text you want to prepend>/
For the C-style comments, use the regexp answer by Brian, and match on line ending $, and insert away.