Let's say we want to replace "apple" to "banana" in every file in the current project. We can do this with Cmd+Shift+F (Find in Files...) and "Replace" button. But this button replaces all simultaneously. What I want to do is replacing one by one. I know this can be done in a single file with Alt+Cmd+F and "Replace" button.
Is there any ways to do in SublimeText3?
Thank you
You can't replace across multiple files in the same way as you can replace in a single file.
The closest you can get is to use Find in Files, make sure Use Buffer is toggled on, and then use Find to perform the search, a Find Results buffer will open. Now you can use F4 to jump straight to the next results line (Shift+F4 to the previous), but you need to manually move the cursor to the relevant section(s) of the line and make the alterations manually.
When performing replacements across files, if it's not a simple case of replacing all of some text with some other text, I have found it best to use a regex to make sure that only the matches I want changed will get changed. Occasionally, if creating a complex regex, I will end up testing the regex using Find to be certain of what it matches, before then running the same regex with replace.
Related
I am trying to find a way to remove all from a tag pair in VS Code.
I’ve been using Notepad++ for this purpose, but for some unknown reason it doesn't work all the time. So, I hope if there is such a possibility in VS Code, it’d be more reliable.
Here is the instruction for Notepad++:
Search for -
<wp:post_name>[^<>]+</wp:post_name>
and replace all with -
<wp:post_name></wp:post_name>
Is there anything like this in VS Code?
I’d really appreciate it if someone can help.
Before using what is suggested in this solution, backup your files, and run the search and replace on a small sample. Be sure to check the outcome to all the possible combinations you can have in your files.
You can achieve what you need with Notepad++ (and SublimeText 3, with RegEx search and replace), and this answer will cover that. Since I've never used Visual Studio Code, I can't say if it will work in it as well.
Consider the following regular expression.
<foo>(.*?)<\/foo>
If we were to apply it to the following text:
<foo><some special chars>!##$%^&*</foo> sure, why not
<foo>Lorem</foo>
<foo>ipsum</foo>
<foo>sit</foo>
<foo>dolor</foo>
<foo>amet</foo>
<bar>elm stuff</bar>
more stuff for you <foo> something </foo> and even more stuff <foo>yes</foo>
it would match all the parts of the text which begin with <foo> and end with </foo>, regardless of what's between them.
If you want to play around with this, I've created an example here.
As far as using this in Notepad++, open the search window, navigate to the Find in files tab, and set it up like in the following image.
You would, of course, need to change the search and replacement strings to those you plan on using, optionally set up a file extension for which to do the replacement (Filters), and set the directory in which to perform find-and-replace.
Limitations
1. Nesting
In case your text contains nested tags of the same kind, like this:
Let's deal with nesting: <foo> some text <foo> a child foo!</foo> let's close the parent</foo>
doing the suggested RegEx search and replace, will turn the previous line of text into this:
Let's deal with nesting: <foo></foo> let's close the parent</foo>
If you don't have nested tags of the same kind, you should be in the clear. Unless...
2. Newlines
The provided RegEx will not match cases where your opening tag shows up in one line, and the closing tag shows up in another line. To match those, you would need to change the original RegEx:
<foo>(.*?)<\/foo>
to this:
<foo>([\s\S]*?)<\/foo>
\s will match any whitespace character (including newlines), while \S will match any non-whitespace character.
I'm trying to replace a few character word in one place with the word searched in another. I.e
VARIABLE INT005 SOME TEXT BETWEEN NAME=INT020;
I want the program To copy whats after VARIABLE (INT005 in this case) and paste it after NAME=(here should be again INT005 replaced into the place of INT020)
A regex replacement should work here. Assuming you are only looking to make these replacements on a single line, you may try the following find and replace:
Find: \bVARIABLE (\S+)(.*?)\bNAME=\S+;
Replace: VARIABLE $1$2NAME=$1
Demo
Edit:
If your text could span multiple lines, then either turn on "dot all" mode from Textpad (not sure where you would do that), or use this find version:
\bVARIABLE (\S+)([\s\S]*?)\bNAME=\S+;
How can I select different portions of multiple non-contiguous lines and replace them with the same/different text?
Example: Let's say my buffer looks like this-
Roses are reed,
Violets aree blue,
Sugaar is sweet,
And so are you,
I want to change in 1st line the 3rd word ('reed') to 'red, yellow and green', in 2nd line 'aree' to 'are', in 3rd line 'Sugaar' to 'Sugar and molasses' and in 4th line 'you,' to 'you.'.
Say my cursor is at 'R' of 'Roses'. I want to select all four of these wrongs at once and nothing other the wrongs. After I'm done selecting I want to be able to move to 'reed' by pressing some key (say Ctrl+j), then after changing I want to be able to press some key (say Ctrl+j) and move the next visual selection which is 'aree'.
Is there any plugin that does this?
There are multiple cursors plugins that attempt to create parallel editing functionality seen in other editors to Vim (which is difficult). If I understand your use case right, that wouldn't help here, though, because all places would be edited in the same way (so reed, areee, etc. would all be replaced with the same red).
Instead, what you seem to be asking for, is a way to search for all wrongly spelled words, and then edit them one by one, individually. You can do this with standard search, using regular expression branches:
/reed\|areee\|Sugaar\|you,/
You can then simply press next to go to the next match after you're done. Note that the branches have to be unique (so I searched for you, instead of simply ,). Adding word boundaries (\<reed\> instead of reed) is a good idea, too.
plugin recommendations
multiple cursors is a famous plugin for parallel editing
My SearchAlternatives plugin lets you add the current word under the cursor as a search branch with a quick (<Leader>+ by default) key mapping. (However, if you're already on the word, why not correct it immediately?)
My SpellCheck plugin populates the quickfix list with all misspelled words and locations. You can then use quickfix navigation (e.g. :cnext) to quickly go to each. The plugin also offers mappings to fix spelling errors directly from the quickfix list.
Say I want to remove all comment blocks in my source code without deleting the whole lines they are on.
It's possible to achieve this using the
:%s/\/\*.*\*\//
command. I was wondering, is there a specific delete command for this, or is replacing the matched pattern the best approach? The difference most likely wouldn't be much, I'm just curious.
Replacing with nothing really is the idiomatic 'delete this pattern' operation.
:%s/pattern//g
If you want to blank all lines that contain a pattern, like in your example, the obvious solution is to add wildcard matches around the pattern.
:%s/.*pattern.*//
An alternative is to use :global with a normal mode or Ex command. These two achieve the same thing:
:g/pattern/normal! S
:g/pattern/delete|put! _
By the way, while I don't recommend using abbreviated command names in scripts or in code that other people might see, I think it's fine to use them interactively. Thus I tend to abbreviate such commands as :g/pattern/norm! S and :g/pattern/d|pu!_.
I've to replace all occurrences of a specific macro inside some(only some amongst dozens) C functions. Since the file is thousands of lines long, with several instances of the macro in all the functions, I'd like to replace all occurrences within the particular function the cursor is currently placed.
I know VIM provides navigation commands (like [[ to go to the beginning of the current function, and then % to find its matching closing brace) , but I can't figure out how to use them to come up with the required search-replace command.
Can anyone help ?
Place your cursor on the first opening brace. Then type v% and you will see the function body get highlighted. Then type the replacement command :s/find/replace/g and hit enter. This will replace within the selected function.
Note: You will see you command prompt change to: :'<,'>:s/find/replace/g.
Although I would also recommend dogbane's solution, I thought I'd also mention the NrrwRgn plug-in. It's quite useful for working on a continuous subset of a buffer.