I'm running Windows 10 - 1703 build 15063.296 - using Edge with Azure Cosmos DB Emulator, the UI tabs on the quick start page don't work? is anyone having the same issue? BTW, the Azure portal works fine.
using Edge with Azure Cosmos DB Emulator, the UI tabs on the quick start page don't work?
If you mean that you could not choose other platforms except .NET in Quickstart page, you could try to uninstall and reinstall the Azure Cosmos DB Emulator, the issue seems fixed now.
I think the issue is that data explorer files got corrupted/non-functional.
After making sure you have the latest version of the emulator installed, follow these steps:
Exit the emulator
Delete all files under C:\Program Files\Azure Cosmos DB Emulator\Packages\DataExplorer\ (not the folder itself - just the files)
Open emulator
I hope this works for you! :)
Related
I am unable to get cosmos emulator started. I keep getting a “This site can’t be reached. Localhost refused to connect” message when it tries to navigate to https://localhost:8081/_explorer/index.html. Several seconds later, I get the below error message:
I'm using the latest version (2.4.5.0). I uninstalled Cosmos Emulator, deleted the %LOCALAPPDATA%\CosmosDBEmulator folder, and reinstalled. Still same issue.
Then, I tried running LODCTR /R in the command prompt twice, but that didn’t do anything for me. I’m out of ideas. This was working for me several months ago, so something happened recently that caused it to stop working. What could be causing this issue? Anything else I can try?
You can follow the steps mentioned here to troubleshoot your issue
If you installed a new version of the emulator and are experiencing errors, ensure you reset your data. You can reset your data by right-clicking the Azure Cosmos Emulator icon on the system tray, and then clicking Reset Data…. If that does not fix the errors, you can uninstall the emulator and any older versions of the emulator if found, remove "C:\Program files\Azure Cosmos DB Emulator" directory and reinstall the emulator
I tried to launch Cosmos DB Emulator, but I get these 3 errors:
DocumentDb Master has stopped working
DocumentDb.GatewayService.exe has stopped working
DocumentDb Server has stopped working
You can download emulator from Microsoft Download Center.Extract setup and run emulator exe.
Once you completed the setup, type Azure Cosmos DB Emulator in Start menu. Run it as administrator
If you are stuck at any point read Here
I think it was the problem about GatewayServiceStartup process.
To solve this, we can try to run the elevated command:
C:\windows\SysWOW64> lodctr /r
This problem is most often caused by incompatibility with local SQL server.
The familiar issue as yours: documentdb emulator gatewayservice crashing on startup
In addition, we can refer to the troubleshooting Chapter from this article for more information.
Hope it is helpful to you.
I had similar problem and gave up. Accidentally I found the solution after (AzureStorageEmulator 5.1 doesn't to start):
seems, I found the reason - the net access for local machine was closed somehow:( I have ran the command
netsh http add iplisten 127.0.0.1
I just downloaded and installed Visual studio on my computer (windows 8.1) to start building windows 8 apps. The problem is when I try to run any application this error message shows up (the application from this error message is called Parcels.comStarter):
Error 1 Error : DEP0700 : Registration of the app failed. Deployment
Register operation on Package
a783768f-d79c-495b-bf64-e59e4297fb42_1.0.0.0_neutral__1mfyfctfxa0tr
from:
(d:\Gebruikers\wardv_000\Downloads\Parcels.comStarter\Parcels.comStarter\Parcels.com\bin\Debug\AppX\AppxManifest.xml)
failed with error 0x8E5E0530. See
http://go.microsoft.com/fwlink/?LinkId=235160 for help diagnosing app
deployment issues. (0x80073cf9) Parcels.com
I searched the entire internet but I didn't found a solution. I also did reinstall visual studio and I still have the problem.
Thanks in advance
Open the Services management console (services.msc) and stop the Windows Installer service.
In Windows Explorer, go to C:\ProgramData\Microsoft\Windows\AppRepository\ and rename PackageRepository.edb to PackageRepository.edb.backup.
Back in the management console, restart the Windows Installer service.
Now run Visual Studio as an administrator and open your project.
I was having this exact same problem, and the solution for me was to unlink my Windows account from my Microsoft account.
There are a couple of things to try.
Run WSReset (press [Win] then type wsreset)
Delete the metastore and remotemetastore folder here: C:\Users\%userprofile%\AppData\Local\Microsoft\Windows\SettingSync where %userprofile% is your username. (I suggest just renaming them to metastore.old and remotemetastore.old)
Make sure that there are no staged packages for the app in question.
If you re-deployed an app that was already installed by some other user, then you would get a deployment error. This should wear off if you change the identity in your package.appxmanifest fie.
You should try an OS refresh. You should not lose your apps and settings.
After that re-link your windows account to microsoft account.
If that doesnt work...The problem may be that visual studio is not able to delete the application data in local folder. So when you go in the location C:\Users\UserName\AppData\Local\Packages you will find application data of app installed in your computer, now you need to find your app's application data and delete the folder. The folder name is the same as the package family name which you can see in your solution.
now again open the solution and rebuild and your app will run. (hopefully)
close visual studio and simulator before deleting the folder.
make sure that your account is set as administrator.
I had the same problem with visual studio running under Parallels VM. The solution was to copy the project from a cloud based directory to a local directory.
I installed the new Azure SDK from the Web Platform Installer.
Now when I try File > New Project > Cloud > Windows Azure Cloud Service > OK
Then I get this error message:
Error: this template attempted to load component assembly 'Microsoft.VisualStudio.CloudService.Wizard, Version=1.0.0.0 ...
I have tried everything I can think of including uninstall of the 1.8 SDK, uninstall of the 2.0 SDK and reninstall. Always I get this message. I cannot see anything about this on the internet. My install gave no error messages.
Also noticed that now in Server Explorer I only have Data Connections, Servers, Windows Azure Service Bus and WIndows Azure Web Sites. There's nothing for storage.
Does anyone have any ideas what may be wrong.
I've had the same problem with skd 2.0
Even trying repairing or installing missing features won't work.
After hours spent on repairing and reinstalling, the only solution I found was to uninstall BOTH Visual Studio and Azure sdk, and installing them again.
After the reinstallation it works fine, but I still have no clue why :P
I keep a development VM for each SDK that comes out. When I upgrade older projects to newer SDKs there are bugs, sometimes bugs without workarounds. I've learned the hard way that installing a new SDK is dangerous.
If you can, develop inside a VM and take occasional snapshots. Otherwise, you do end up reinstalling Visual Studio and installing the original SDK that you first created you project with. -Richard
I've seen this issue on multiple machines after upgrading to 2.7, 2.8, and/or 2.9. Reinstalling VS, VS Updates, and/or SDKs would sometimes help, but sometimes not. The last time no combination of installs worked.
I finally ran Visual Studio with logging enabled via Devenv /log, and according to the %AppData%\Microsoft\VisualStudio\{version#}\ActivityLog.xml file, there was an error merging the configuration file located at %LocalAppData%\Microsoft\VisualStudio\{version#}\devenv.exe.config I deleted that config file and restarted Visual Studio and the problem went away.
Uninstall Visual Studio using VisualStudioUninstaller did the trick for me.
Then I did a clean install of Visual Studio and Azure SDK, and everything worked just fine!
I have a web application asp.net to deploy to Windows Azure. I try to run it on local first. But when debugging, I catch this error from VS2010:
"There was an error attaching the debugger to the IIS worker process
for URL 'http://127.255.0.0:82/' for role instance
'deployment16(6).WindowsAzureProject2.WebApplication3_IN_0'.
Unable to start debugging on the web server ......."
I've search so hard to find the solution for this problem but there's nothing seems work for me. I'm a newbie in Windows Azure, it's really a big trouble with me.
I had similar problem with Windows 8, debuging a cloud application with Visual Studio 2012 RTM and Azure SDK 1.71, when trying to launch the application into the compute emulator. It was a very simple app, but I used Azure diagnostics. At the end these are two things I have changed that have work for me, both turning on Windows 8 features (so go to Win8 and open 'Turn Windows Features On/Off'.
Activate the checkboxes for:
Internet Information Services Hostable Web Core
Internet Information Services > World Wide Web Services > Application Development Features > ASP.NET 4.5
Internet Information Services > World Wide Web Services > Health and Diagnostics > Tracing
Internet Information Services > Web Management Tools > IIS Management Scripts and Tools
That worked for me, it makes sense, as I'm using Visual Studio 2012 and trying to get some trace information using diagnostics in Azure.
I hope this will work for you or give some tip about the problem. In the case of being useful information, remember to vote as response or as value tip.
Thanks,
Mike
This usually happens when there's a problem with the project to be deployed to the emulator (WindowsAzureProject2 in your case).
Try the following:
Check %UserProfile%\AppData\Local\dftmp\IISConfiguratorLogs\IISConfigurator.log file for the error messages. See more details in this answer.
Make sure your project can be started without the emulator. It's a web project, so just try to start it as a regular web project. Or publish it to the separate folder and try to create a website in IIS of it.
Check your *.csdef and *.cscfg files to make sure all the configuration is correct.
Make sure that the build output of your project is not empty. You can do this by going to IIS, find the site with the name similar to deployment16(6).WindowsAzureProject2.WebApplication3_IN_0, right click --> Explore.... Make sure that this folder is not empty and contains all the files required to start a web project successfully.
BTW, there's a similar question: Debugger can't connect when starting local azure project
Follow step 11 from http://www.microsoft.com/en-us/download/details.aspx?id=35448. Worked for me on Windows 8 with Oct 2012 SDk
I just have today the same problem trying to Debug locally with Azure Storage Emulator in Windows 7. So in the Azure project properties, in Web tab, I checked the radio button 'Use IIS Express' and it debugged without problem. I hope this helps someone.
I encountered this exact same problem when I upgraded an existing Azure solution to the Azure SDK 2.1. After some hunting around I uncovered that the upgrade had automatically set the "Local Development Server" setting to "Use IIS Web Server".
Changing the "Local Development Server" setting to "Use IIS Express" fixed the problem immediately.
To access this setting right-click the Azure cloud project file in your solution, select the "Properties" option, tab down to "Web" and you'll see the following setup.
Also, make sure you run Visual Studio as administrator
Please check the version of emulator you have installed. If your code is created in older sdk and you have a new emulator installed it will give you this error.
Check the version of Azure APIs in your project, go to Project > references and right click on Azure dlls to check the version, same sdk version must be installed on the system, higher are optional as azure 2.x are not backward compatible.