I have the same issue as the below link but with a different graph (APPrintChecks)
how-do-i-override-pxfilteredprocessingjoin-in-a-graph-extension-without-altering
I am overriding the main view to pull in the remittance name from APContact to show in the grid.
[PXFilterable]
public PXFilteredProcessingJoin<APPayment, PrintChecksFilter,
InnerJoin<Vendor, On<Vendor.bAccountID, Equal<APPayment.vendorID>>,
InnerJoin<APContact, On<APContact.contactID, Equal<APPayment.remitContactID>>>>,
Where<boolTrue, Equal<boolTrue>>,
OrderBy<Asc<Vendor.acctName, Asc<APPayment.refNbr>>>> APPaymentList;
However, I do not know how to override the delegate so I won't have the same problem as the other poster (no filter being applied).
protected virtual IEnumerable appaymentlist()
{
if (cleared)
{
foreach (APPayment doc in APPaymentList.Cache.Updated)
{
doc.Passed = false;
}
}
foreach (PXResult<APPayment, Vendor, PaymentMethod, CABatchDetail> doc in PXSelectJoin<APPayment,
InnerJoinSingleTable<Vendor, On<Vendor.bAccountID, Equal<APPayment.vendorID>>,
InnerJoin<PaymentMethod, On<PaymentMethod.paymentMethodID, Equal<APPayment.paymentMethodID>>,
LeftJoin<CABatchDetail, On<CABatchDetail.origModule, Equal<BatchModule.moduleAP>,
And<CABatchDetail.origDocType, Equal<APPayment.docType>,
And<CABatchDetail.origRefNbr, Equal<APPayment.refNbr>>>>>>>,
Where2<Where<APPayment.status, Equal<APDocStatus.pendingPrint>,
And<CABatchDetail.batchNbr, IsNull,
And<APPayment.cashAccountID, Equal<Current<PrintChecksFilter.payAccountID>>,
And<APPayment.paymentMethodID, Equal<Current<PrintChecksFilter.payTypeID>>,
And<Match<Vendor, Current<AccessInfo.userName>>>>>>>,
And<APPayment.docType, In3<APDocType.check, APDocType.prepayment, APDocType.quickCheck>>>>.Select(this))
{
yield return new PXResult<APPayment, Vendor>(doc, doc);
if (_copies.ContainsKey((APPayment)doc))
{
_copies.Remove((APPayment)doc);
}
_copies.Add((APPayment)doc, PXCache<APPayment>.CreateCopy(doc));
}
}
There are other private variables that are referenced in this. Any help appreciated.
Also, if there's a simpler way to pull in a related value on a grid like this (virtual field in DAC?) I'm not stuck on doing it with a graph extension.
So this appears to work but it seems messy and duplicates a lot of code and private variables. Appreciate any feedback if there's a better way to do this:
public class APPrintChecks_Extension : PXGraphExtension<APPrintChecks> {
[PXFilterable]
public PXFilteredProcessingJoin<APPayment, PrintChecksFilter,
InnerJoin<Vendor, On<Vendor.bAccountID, Equal<APPayment.vendorID>>,
InnerJoin<APContact, On<APContact.contactID, Equal<APPayment.remitContactID>>>>,
Where<boolTrue, Equal<boolTrue>>,
OrderBy<Asc<Vendor.acctName, Asc<APPayment.refNbr>>>> APPaymentList;
public IEnumerable appaymentlist()
{
if (cleared)
{
foreach (APPayment doc in APPaymentList.Cache.Updated)
{
doc.Passed = false;
}
}
foreach (PXResult<APPayment, Vendor, APContact, PaymentMethod, CABatchDetail> doc in PXSelectJoin<APPayment,
InnerJoinSingleTable<Vendor, On<Vendor.bAccountID, Equal<APPayment.vendorID>>,
InnerJoin<APContact, On<APContact.contactID, Equal<APPayment.remitContactID>>,
InnerJoin<PaymentMethod, On<PaymentMethod.paymentMethodID, Equal<APPayment.paymentMethodID>>,
LeftJoin<CABatchDetail, On<CABatchDetail.origModule, Equal<BatchModule.moduleAP>,
And<CABatchDetail.origDocType, Equal<APPayment.docType>,
And<CABatchDetail.origRefNbr, Equal<APPayment.refNbr>>>>>>>>,
Where2<Where<APPayment.status, Equal<APDocStatus.pendingPrint>,
And<CABatchDetail.batchNbr, IsNull,
And<APPayment.cashAccountID, Equal<Current<PrintChecksFilter.payAccountID>>,
And<APPayment.paymentMethodID, Equal<Current<PrintChecksFilter.payTypeID>>,
And<Match<Vendor, Current<AccessInfo.userName>>>>>>>,
And<APPayment.docType, In3<APDocType.check, APDocType.prepayment, APDocType.quickCheck>>>>.Select(Base))
{
yield return new PXResult<APPayment, Vendor, APContact>(doc, doc, doc);
if (_copies.ContainsKey((APPayment)doc))
{
_copies.Remove((APPayment)doc);
}
_copies.Add((APPayment)doc, PXCache<APPayment>.CreateCopy(doc));
}
}
private bool cleared;
public void Clear()
{
Base.Filter.Current.CurySelTotal = 0m;
Base.Filter.Current.SelTotal = 0m;
Base.Filter.Current.SelCount = 0;
cleared = true;
Base.Clear();
}
private readonly Dictionary<object, object> _copies = new Dictionary<object, object>();
}
Per Rick's suggestion I implemented the FieldSelecting method. Much, much simpler/cleaner code. It does in fact cause a round trip to the database for each row when using this in a grid column, however, for check printing this should be acceptable. Thanks Rick! Code below.
protected void APPayment_UsrRemitTo_FieldSelecting(PXCache cache, PXFieldSelectingEventArgs e)
{
var row = (APPayment)e.Row;
// fill usrRemitTo from APContact
if (row != null)
{
var extension = PXCache<APRegister>.GetExtension<APRegisterExt>(row);
using (PXConnectionScope cs = new PXConnectionScope())
{
APContact rec = PXSelectReadonly<APContact, Where<APContact.contactID, Equal<Required<APPayment.remitContactID>>>>.Select(Base, row.RemitContactID);
if (rec != null)
{
string remitToName = (!string.IsNullOrEmpty(rec.FullName)) ? rec.FullName : "";
e.ReturnValue = remitToName;
}
else
{
e.ReturnValue = "";
}
}
}
}
Using DBScalar, you can further simplify your event with just one line :
public class APPaymentExt : PXCacheExtension<APPayment>
{
#region UsrRemitTo
[PXString(100)]
[PXUIField(DisplayName="Remit To")]
[PXDBScalar(typeof(Search<APContact.fullName,Where<APContact.contactID, Equal<APPayment.remitContactID>>>))]
public virtual string UsrRemitTo { get; set; }
public abstract class usrRemitTo : PX.Data.BQL.BqlString.Field<usrRemitTo> { }
#endregion
}
Does anyone have a code snippet on how to go from RefNoteId => DAC when I dont know what dac type the note is attached to?
I have made it this far (row.RefNoteID is what I am starting from)
Note note = PXSelect<Note, Where<Note.noteID, Equal<Required<Note.noteID>>>>.Select(this, row.RefNoteID);
Type recordType = Type.GetType(note.EntityType);
PXCache recordCache = Caches[recordType];
How can I now do a PXSelect<recordType, Where<recodType.noteID, Equal<Required<recordType.noteID>>>>.Select(GRAPH) ? The recordType could be any DAC in the system that has a noteID.
Thanks
The below code works for me and it is based on the way Acumatica gets the record inside the PXRefNoteSelectorAttribute.PrimaryRow_RowPersisted.
The problem with this approach is that this will work for Header entities like SOOrder, INRegister, SOInvoice, SOShipment, and others. But for "detail" entities like SOLine, INTran, and others this approach will work only if that corresponding record has some Note related to Text/File. Acumatica is adding records corresponding to their NoteID into the Note table only if that detail records have some Note/Text. My best guess is that this is done in order to avoid over-spamming the Note table.
using PX.Data;
using PX.Objects.SO;
using System;
using System.Collections;
using System.Linq;
using System.Web.Compilation;
namespace SearchByNoteID
{
// Acuminator disable once PX1016 ExtensionDoesNotDeclareIsActiveMethod extension should be constantly active
public class SOOrderEntryExt : PXGraphExtension<SOOrderEntry>
{
public PXAction<SOOrder> searchByNoteID;
[PXUIField(DisplayName ="Search by Note ID")]
[PXButton(CommitChanges = true)]
public virtual IEnumerable SearchByNoteID(PXAdapter adapter)
{
var order = adapter.Get<SOOrder>().FirstOrDefault();
if(order!=null)
{
//
//...
//
Guid? noteID = GetNoteID();
object record = GetRecordByNoteID(noteID);
//
//... do whatever you want with the record
//
}
return adapter.Get();
}
protected object GetRecordByNoteID(Guid? noteID)
{
var type = GetEntityType(this.Base, noteID);
if(type==null) return null;
object entityRow = new EntityHelper(this.Base).GetEntityRow(type, noteID);
return entityRow;
}
protected Type GetEntityType(PXGraph graph, Guid? noteID)
{
if (noteID == null)
{
return null;
}
Note note = PXSelectBase<Note, PXSelect<Note, Where<Note.noteID, Equal<Required<Note.noteID>>>>.Config>.SelectWindowed(graph, 0, 1, new object[]
{
noteID
});
if (note == null || string.IsNullOrEmpty(note.EntityType))
{
return null;
}
return PXBuildManager.GetType(note.EntityType, false);
}
}
}
I need help to update the value of Project's attribute from different page.
I have fetched the attribute value in 'Appointments' page using following code.
protected void FSAppointment_RowSelected(PXCache cache, PXRowSelectedEventArgs e, PXRowSelected InvokeBaseHandler)
{
if (InvokeBaseHandler != null)
InvokeBaseHandler(cache, e);
var row = (FSAppointment)e.Row;
AppointmentEntry graph = (AppointmentEntry)cache.Graph;
if (graph.ServiceOrderRelated.Current != null)
{
int? projectID = graph.ServiceOrderRelated.Current.ProjectID;
ProjectEntry projectGraph = PXGraph.CreateInstance<ProjectEntry>();
projectGraph.Project.Current = projectGraph.Project.Search<PMProject.contractID>(projectID);
foreach (CSAnswers att in projectGraph.Answers.Select())
{
if (att.AttributeID == "ESTHOURS")
{
cache.SetValueExt<FieldService.ServiceDispatch.FSAppointmentExt.usrProjectEstimatedRemainingHours>(row, att.Value);
return;
}
}
}
}
And, now I want user to be able to update that particular attribute's value from 'Appointments' page.
For that, I had written following code by overriding the Persist method of 'Appointments' page.
public delegate void PersistDelegate();
[PXOverride]
public void Persist(PersistDelegate baseMethod)
{
if (Base.ServiceOrderRelated.Current != null)
{
using (PXTransactionScope scope = new PXTransactionScope())
{
int? projectID = Base.ServiceOrderRelated.Current.ProjectID;
ProjectEntry projectGraph = PXGraph.CreateInstance<ProjectEntry>();
var project = projectGraph.Project.Search<PMProject.contractID>(projectID);
var answers = projectGraph.Answers.Select();
foreach (CSAnswers att in answers)
{
if (att.AttributeID == "ESTHOURS")
{
att.Value = "20";
}
}
projectGraph.Actions.PressSave();
}
}
baseMethod();
}
But still it is not updating the value.
The thing to realize is that the attribute system is different that the usual DAC->SQL system. CSAnswers is a unnormalized table of values for all the attributes. They are linked to a DAC document by RefNoteID. See select * from CSAnswers where AttributeID = 'ESTHOURS' In the code above you are altering every project's 'esthours'. You're also missing a statement where you tell the graph to update the cache with your altered object. Something like projectGraph.Answers.Update(att);
As title, i don't know how can customize this page (processing page). I have extension with override Initialize as below
Base.INDocumentList.SetProcessDelegate(delegate(List<INRegister> list){ ReleaseDocExt(list); });
But ReleaseDocExt not run when i process item.
I was able to create an extension and override the release process. If I include this extension, system will show "Hello, World!" when trying to release any IN document from the batch processing screen:
namespace PX.Objects.IN
{
public class INDocumentRelease_Extension:PXGraphExtension<INDocumentRelease>
{
public override void Initialize()
{
Base.INDocumentList.SetProcessDelegate(delegate(List<INRegister> list){ ReleaseDocExt(list); });
}
public static void ReleaseDocExt(List<INRegister> list)
{
throw new PXException("Hello, World!!");
}
}
}
This code is not getting invoked when releasing a document from one of the inventory screens, like the Receipts (IN.30.10.00) screen. The reason is because these screens directly invoke a static method in the INDocumentRelease class, and don't create a graph to do it:
public PXAction<INRegister> release;
[PXUIField(DisplayName = Messages.Release, MapEnableRights = PXCacheRights.Update, MapViewRights = PXCacheRights.Update)]
[PXProcessButton]
public virtual IEnumerable Release(PXAdapter adapter)
{
PXCache cache = receipt.Cache;
List<INRegister> list = new List<INRegister>();
foreach (INRegister indoc in adapter.Get<INRegister>())
{
if (indoc.Hold == false && indoc.Released == false)
{
cache.Update(indoc);
list.Add(indoc);
}
}
if (list.Count == 0)
{
throw new PXException(Messages.Document_Status_Invalid);
}
Save.Press();
PXLongOperation.StartOperation(this, delegate() { INDocumentRelease.ReleaseDoc(list, false); });
return list;
}
There's therefore no opportunity for system to include your extension in this process.
If you absolutely need to customize this process, you'll also need to override the Release actions in the individual screens. This code could also be modified by Acumatica to avoid the use of static functions, and instead instantiate a INDocumentRelease instance that can be customized.
Finally, I would like to warn you about customizing the transaction release processes - make sure you know what you're doing!
I've created a custom event document that extends the fields of the normal event document. I've added a field that can keep 0 to many category Ids in a pipe delimited list. Categories are stored in a custom table.
Here is my filter code:
public partial class CMSGlobalFiles_EventCategoryFilter : CMSAbstractDataFilterControl
{
protected void Page_Load(object sender, EventArgs e)
{
}
protected override void OnInit(EventArgs e)
{
SetupControl();
base.OnInit(e);
}
protected override void OnPreRender(EventArgs e)
{
if (RequestHelper.IsPostBack())
{
setFilter();
}
base.OnPreRender(e);
}
private void SetupControl()
{
if (this.StopProcessing)
{
this.Visible = false;
}
else if (!RequestHelper.IsPostBack())
{
InitializeCategory();
}
}
private void InitializeCategory()
{
CustomTableItemProvider customTableProvider = ne CustomTableItemProvider(CMSContext.CurrentUser);
string where = "";
string tableName = "customtable.EventCategory";
DataClassInfo customTable = DataClassInfoProvider.GetDataClass(tableName);
if (customTable != null)
{
DataSet dataSet = customTableProvider.GetItems(tableName, where, null);
if (!DataHelper.DataSourceIsEmpty(dataSet))
{
this.drpCategory.DataSource = dataSet;
this.drpCategory.DataTextField = "CategoryName";
this.drpCategory.DataValueField = "ItemGUID";
this.drpCategory.DataBind();
this.drpCategory.Items.Insert(0, new ListItem("(all)", "##ALL##"));
}
}
}
private void setFilter()
{
string where = null;
if (this.drpCategory.SelectedValue != null)
{
Guid itemGUID = ValidationHelper.GetGuid(this.drpCategory.SelectedValue, Guid.Empty );
if (itemGUID != Guid.Empty)
{
where = "EventCategory LIKE \'%" + itemGUID.ToString() + "%\'";
}
}
if (where != null)
{
this.WhereCondition = where;
}
this.RaiseOnFilterChanged();
}
}
This filter works great using a basic repeater and a document data source. When I use the event calendar it does not. I'm using Kentico version 6.0.30
The problem is in the different lifecycle of the EventCalendar, based on the CMSCalendar control which is based on standard .Net Calendar.
First of all, our developers discovered a way to fix this and allow your scenario to run by default. This fix will be included in the 6.0.33 hotfix (scheduled to go out on Friday 25th).
I'm sorry for this inconvenience.
Aside from this upcoming fix, it's also possible to make the EventCalendar to filter its results by modifying (cloning) the web part, integrating the filter controls directly into that web part and set the calendar's Where condition in the OnPreRender before the DataBind as
protected override void OnPreRender(EventArgs e)
{
calItems.WhereCondition = "some filtering condition";
...
If you can hotfix your CMS instance, it would be certainly less effort.
Regards,
Zdenek / Kentico Support