I use the following command to get the MAC address of the system.
ifconfig | grep enp0s20f6 | awk '{print $5}'
The following command is used to get the hash of the string:
echo -n "string to be hashed"| md5sum | awk '{print $1}'
I need to get the hashed string for the MAC address by combining both of these commands.
I tried the following, but didn't work.
ifconfig | grep enp0s20f6 | awk '{print $5}' | md5sum
md5sum /sys/class/net/eth0/address | awk '{print $1}'
Try this:
$ cat /sys/class/net/eth0/address | md5sum
Replace eth0 by the name of your interface. Hope it helps! :)
md5sum < /sys/class/net/eth0/address
This command also helps to get the md5sum of mac address
Related
ifconfig | grep -m1 "inet addr"
Gives me
inet addr:172.30.1.6 Bcast:172.30.140.255 Mask:255.255.252.0
However, I only want the ip, which is 172.30.1.6. How can I do this?
Note that I have to be using ifconfig, as this is an embedded system with limited functionalities.
Get out your scissors, it's cuttin' time.
echo inet addr:172.30.1.6 Bcast:172.30.140.255 Mask:255.255.252.0 | cut -d : -f 2 | cut -d " " -f 1
One way to do it ..
ifconfig | grep -m1 "inet addr" | awk '{print $2}' | awk -F: '{print $2}'
If all you want to do is obtain the ip address, there might be easier ways of achieving that using say hostname -i ( reference Which terminal command to get just IP address and nothing else? )
Since others have mentioned cut and awk, I will provide a solution using sed :
echo "inet addr:172.30.1.6 Bcast:172.30.140.255 Mask:255.255.252.0" | sed -e "s/.*\(addr:[^ ]*\) .*/\1/"
addr:172.30.1.6
echo "inet addr:172.30.1.6 Bcast:172.30.140.255 Mask:255.255.252.0" | sed -e "s/.*addr:\([^ ]*\) .*/\1/"
172.30.1.6
Use cut with a delimiter
| cut -d':' -f 2 | cut -d' ' -f 1
Is this all you're trying to do?
awk -F'[: ]' '/inet addr/{print $3; exit}'
For example using cat file in place of ifconfig:
$ cat file
inet addr:172.30.1.6 Bcast:172.30.140.255 Mask:255.255.252.0
$ cat file | awk -F'[: ]' '/inet addr/{print $3; exit}'
172.30.1.6
Here's a way to do it with a single sed command, eliminating the call to grep:
ifconfig | sed -n '/inet addr/{s/^.*inet addr:\([^ ]*\).*$/\1/p;q}'
There are a few things going on here:
sed -n tells sed not to print every line like it normally does
/inet addr/ is a sed address - it tells sed to only operate on lines containing "inet addr"
The { and } brackets define a block of commands to be run, with the commands separated by a ;
The s command is fairly straightforward - it just captures the IP and replaces the whole line with just the IP
The p flag at the end of the s command tells sed to print the result of the substitution. This is necessary because we called sed with the -n option.
The q command tells sed to quit, so that it only processes the first line containing "inet addr".
Using the -n option, the /inet addr/ address, the p flag on the s command, and the q command, essentially has the same effect as grep -m1 "inet addr", which makes calling grep unnecessary. In fact, it's worth noting that the following commands produce identical output:
> ifconfig | grep -m1 "inet addr"
inet addr:192.168.1.1 Bcast:192.168.2.255 Mask:255.255.255.0
> ifconfig | sed -n '/inet addr/{p;q}'
inet addr:192.168.1.1 Bcast:192.168.2.255 Mask:255.255.255.0
Here, I've omitted the s/pattern/replacement/p part of the sed command, and replaced it with a p command (which just prints the whole line), just to show the effect of the other parts in isolation.
Just use the command cut.
ip a | grep -m1 "inet addr" | cut -d':' -f 2 | cut -d' ' -f 1
I also advise you to learn the use of other commands such as : wc,sed,tr,sort,uniq. They will help manipulate the output as you please. Here is a small lesson where we present you all these command : https://www.javatpoint.com/linux-filters
I hope to help you.
Using Bash's regex operator =~:
$ [[ $(ifconfig | grep -m1 "inet addr") =~ [0-9]+\.[0-9]+\.[0-9]+\.[0-9]+ ]] && echo ${BASH_REMATCH[0]}
172.30.1.6
Update: Something even better in the comments.
I am running the following command in a bash script:
echo `netstat -plten | grep -i autossh | awk '{print $4}'` >> /root/logs/autossh.txt
The output displays in a single line:
127.0.0.1:25001 127.0.0.1:15501 127.0.0.1:10001 127.0.0.1:20501 127.0.0.1:15001 127.0.0.1:5501 127.0.0.1:20001
I would like each IP to display line by line. What do I need to do with the awk command to make the output display line by line
Just remove the echo and subshell:
netstat -plten | grep -i autossh | awk '{print $4}' >> /root/logs/autossh.txt
awk is already printing them one per line, but when you pass them to echo it parses its arguments and prints them each with a space between them. Every line of awk output then becomes a separate argument to echo so you lose your line endings.
Of course, awk can do pattern matching too, so no real need for grep:
netstat -plten | awk '/autossh/ {print $4}' >> /root/logs/autossh.txt
with gawk at least you can have it ignore case too
netstat -plten | awk 'BEGIN {IGNORECASE=1} /autossh/ {print $4}' >> /root/logs/autossh.txt
or as Ed Morton pointed out, with any awk you could do
netstat -plten | awk 'tolower($0) ~ /autossh/ {print $4}' >> /root/logs/autossh.txt
You can just quote the result of command substitution to prevent the shell from performing word splitting.
You can modify it as follows to achieve what you want.
echo "`netstat -plten | grep -i autossh | awk '{print $4}'`" >> /root/logs/autossh.txt
I'm wondering how I can query by IP address using sed, and it will show which interface name that is using it.
For example..
ipconfig -a | grep 10.0.0.10
I would expect it to come back with ETH0
ifconfig | grep -B1 10.0.0.10 | grep -o "^\w*"
You should use this comand :
ifconfig | grep -B1 "inet addr:10.0.0.10" | awk '$1!="inet" && $1!="--" {print $1}'
Hope this help !
ip -br -4 a sh | grep 10.0.0.10 | awk '{print $1}'
If you want sed specific solution you may try this. Its little hard to digest how it works , but finally this combination works.
ifconfig | sed -n '/addr:10.0.0.10/{g;H;p};H;x' | awk '{print $1}'
If you want to take it as an argument via script use "$1" or so instead if 10.0.0.10.
Sed manual for reference : http://www.gnu.org/software/sed/manual/sed.html#tail
I'm trying to get a working directory of a running vms. I can do that in multiple bash command but I'm trying to do that in a one-liner.
Here's what I have got so far.
VBoxManage list runningvms | grep vip-quickstart | VBoxManage showvminfo $(awk -F '' '{print $1}')
But I get this error
awk: field separator FS is empty
How do I pass the result of grep to VBoxManage command?
Here's the result of
VBoxManage list runningvms
"vip-quickstart_default_1431403025707_81359" {7b9a9c04-2bd9-4fd3-92c8-50293fbbca23}
"Some other running vms" {7b9a9c04-2bd9-4fd3-92c8-50293fbbca23}
And after I pipe that through grep I get this
"vip-quickstart_default_1431403025707_81359" {7b9a9c04-2bd9-4fd3-92c8-50293fbbca23}
And I thought I could awk that to get the VMId by awk -F ' ' '{print $1}' which I would get "vip-quickstart_default_1431403025707_81359" which I could pipe that again to
VboxManage showvminfo
How do I do that in a single command line?
First is you have given '' blank in your first command. Giving blank as a field separator is a problem. If space is field separator then even if you don't mention -F' ' ,awk will work. for example
VBoxManage list runningvms | grep vip-quickstart | VBoxManage showvminfo $(awk '{print $1}')
Now you want to run command VBoxManage showvminfo on the output from awk then use below:-
VBoxManage list runningvms | grep vip-quickstart | awk '{print $1}' | xargs VBoxManage showvminfo
OR
VBoxManage list runningvms | awk '/vip-quickstart/{print $1}' | xargs VBoxManage showvminfo
It seems you have a type with field seperator where you dont have space after two quotes after -F argument.
Try something like:
VBoxManage list runningvms | awk '/vip-quickstart/{print $0}'
I want to print the IP and the Port separately using netstat command,
I tried this:
netstat -nat | awk '{print $4}'
But It gives me that:
192.168.1.213:40405
I want something like that:
First the IP: 192.168.1.213
and with another command the Port: 40405
You could always pipe it into cut:
# Just the IP:
$ netstat -nat | awk '{print $4}' | cut -d ":" -f1
# Just the port:
$ netstat -nat | awk '{print $4}' | cut -d ":" -f2
If you want them as different commands, you could use sed to do it like:
netstat -nat | awk '{print $4}' | sed -e 's/:.*//' # gives IP only
netstat -nat | awk '{print $4}' | sed -e 's/.*://' # gives port only
Depending on how you're using it, you could store it in a bash variable and accomplish the same thing while access it like
both=$(netstat -nat | awk '{print $4}')
ip=${both%%:*}
port=${both##*:}
i am using zsh shell and i am getting port in new line with the same command
netstat -nat | awk '{print $4}'
maybe try changing your profile preference