I would like to place a few graphs beside each other horizontally. The issue is only the one at the middle should have an xlabel.
On implementing that, the other graphs appear to start a bit below on merging all the images together. I have tried to change the color of xlabel, but it hasn't been working on epslatex. Neither supplying a null value worked ("").
set format "$%g$"
set terminal epslatex size 5.25,4.2 color standalone
set output "count.tex"
unset key
set yrange [0:18]
set xrange [0:18]
set cbrange [0:1400]
unset colorbox
set ylabel "Species 2 ----->"
set xlabel "Species 1 ----->" tc rgb "white"
plot 'combine.txt' u 1:2:3 with points pointtype 7 pointsize 3 palette
Please help me regarding this.
I found a workaround regarding this. A space could be printed instead.
set encoding iso_8859_1
set xlabel "\240"
Most (if not all) labels and similar can be deactivated by unset. So you are looking for:
unset xlabel
Related
Using gnuplot, how can I plot sin(x) in the x-z plane and sin(x) in the x-y plane, both at the same time? I'm guessing I need to use the set parametric command and the splot command, but I can't seem to work out the rest! Does anyone know how to do this? I'm trying to generate a plot which demonstrates the nature of an electromagnetic wave. Thanks.
Yes, parametric mode is a possibility. For example, splot u,0,sin(u), u,sin(u),0 will plot the two (!) parametric curves u,0,sin(u) and u,sin(u),0. The variable u is the parametric dummy variable, for a simple sine function we only need one of them, even in 3d mode.
It might look a bit nicer with the following settings, but this is of course my biased opinion, far from finished, and depends on your needs:
set terminal pngcairo
set output "emfield.png"
set yrange [-2:2]
set zrange [-2:2]
set parametric
umax = 6*pi
set urange [0:umax]
unset border
unset xtics
unset ytics
unset ztics
# Set zeroaxes
set xyplane at 0
set arrow from 0,0,0 to (umax*1.1),0,0 size screen 0.020,15,60 filled
set arrow from 0,1,0 to 0,-1,0 size screen 0.020,15,60 filled
set arrow from 0,0,-1.4 to 0,0,1.4 size screen 0.020,15,60 filled
splot u,0,sin(u) lc 6, u,sin(u),0 lc 7
The result looks like this:
I'm trying to use multiplot to stack two image plots on top of one another, in a column. When I try to test this with x11 terminal, the images are produced separately, only one visible at a time. When I use the epslatex terminal, which is what I want, then the text is drawn correctly within the LaTeX document, but the EPS portion of the plot is produced as two separate pages, resulting in a figure that is missing a lower half.
Here's the multiplot section of my script:
set multiplot 2,1
set cbrange [-0.4:0.4]
set cbtics -0.4,0.2,0.4
unset xlabel
set tmargin at screen 0.95
set bmargin at screen 0.60
plot data u 1:2:3 with image notitle
set cbrange [-0.1:0.1]
set cbtics -0.1,0.05,0.1
set xlabel "$x$"
set tmargin at screen 0.50
set bmargin at screen 0.15
plot data u 1:2:3 with image notitle
unset multiplot
unset output
What results in the document is this:
I have tried enlarging the vertical size of the plotting area(per this question), but what this does is increase size of each page in the EPS file. To be clear, the product of plotting with epslatex is an EPS file containing two pages, the first with the first plot at the position that I want (near the top), and the second with the second plot at the position that I want (near the bottom).
This normally happens when you are not in multiplot mode. For me, set multiplot 2,1 gives an error message "only valid in the context of an auto-layout command". The command set multiplot layout 2,1 works with Gnuplot 5.0 and 4.6.
As a side note: This behavior can be used to produce animated gifs with set terminal gif animate, each plot command creates a new frame.
I am trying to plot a function of two variables represented in tabular form. I would like to label my color bar while representing this as a heatmap. No matter how much I rescale, no luck, and I don't even see the colorbar label appearing. Here is my gnuplot script:
set title "Flux in core vs radius and height"
set view map
set cblabel "Neutron flux (cm^-2 s^-1)"
set xlabel "Radius (cm)"
set ylabel "Axial distance from center (cm)"
splot "flux.out" using 1:2:3 with image
And the result looks like this, lacking a colorbar label:
The cblabel is printed outside the picture. You can manually adjust the margins to make some space for the label:
set lmargin at screen 0.1
set rmargin at screen 0.7
I used at screen because else the picture would be cropped again. And I also set lmargin because else in my test the ylabel would not fit on the page.
Tested with Gnuplot 4.6.
im running gnuplot 4.6.5 on top of ubuntu 12.04 and use the x11 terminal. I use the script as follows but the ylabel is not visible (xlabel is fine). What i have to do to fix it? offset?
thanks for help
plot "512bytesCBR3000client4server1numofnodes.txt" using 1:2 title 'NativeOF' with linespoints lw 2 ps 3 pt 6 lt 3
set grid
set ylabel "End to end delay"
set xlabel "number of nodes"
Normally, you have to do all the settings (set xlabel, set ylabel, set grid) before you call plot if you want them them to show up in the plot. I am not sure why set xlabel is working for you unless you set it in a previous plot or while trying commands from the gnuplot command line.
Try moving the plot command to the end of the file.
Sometimes, this might be related to the margins of the canvas. Therefore, might be wise to play with the margin settings, for example:
# other grid settings
set lmargin 10
set rmargin 10
set tmargin 5
set bmargin 5
# plot command
I'm trying to model a certain progress through some environment. The x axis would represent the location (based on x coordinate) in the environment.
In order to make this clear, I'd like an image of the environment (based on a .png) on the x axis (the environment is rather wide and not that high, so it should look good) of my plot, basically as an xtics/x-axis label.
Do you have any suggestions on how to approach this?
Thanks in advance!
You can either plot both the image and the data in one plot command, or with multiplot. The first variant is easier, but the image is inside the plot, the other is a bit more complicated, but allows arbitrary positioning of the "axis image".
The dummy image "gradient.png" for the axis is
One plot command:
set yrange[0:1]
set xrange[0:1]
plot 'gradient.png' binary filetype=png dx=0.0015 dy=0.002 with rgbimage t '',\
x**2
The result is:
Using multiplot
set yrange[0:1]
set xrange[0:1]
set lmargin at screen 0.1
set rmargin at screen 0.98
set tmargin at screen 0.98
set bmargin at screen 0.2
set xtics offset 0,-1.5
set xlabel 'xlabel' offset 0,-1.5
set ylabel 'ylabel'
set multiplot
plot x**2
set tmargin at screen 0.2
set bmargin at screen 0.15
unset border
unset tics
unset xlabel
unset ylabel
unset key
set autoscale xy
plot 'gradient.png' binary filetype=png with rgbimage
unset multiplot
As you can see, this requires a bit more effort. To explain the details:
You must set explicit margins so that the axis image can be placed exactly below the main plot.
Before plotting the axis image, you must remove tics, labels, reset ranges to autoscale etc. (Therefore you must also set fixed lmargin and rmargin).
To plot the image itself, use the plotting style with rgbimage.
You must fine-tune the xtics and xlabel offset, as well as the marings.
The resulting image is: