I am following instructions from here:
https://www.datacamp.com/community/tutorials/apache-spark-python#gs.WEktovg
I downloaded and prebuilt version of Spark , untarred it and mv it to /usr/local/spark.
According to this, this is all I should have to do.
Unfortunately, I can run the interactive shell as it cant find the file.
When i run :
./bin/pyspark
I get
-bash: ./bin/pyspark: No such file or directory.
I also notice that installing it this way does not add it to the bin directory.
Is this tutorial wrong or am I missing a trick?
You need to change your working directory to /usr/local/spark. Then this command will work.
And also, when you untar it, it usually will not add it to bin folder. You need to add it manually by adding the path to environment variables.
Update your working Directory to /usr/local/spark and execute the command. Hopefully this will fix the issue.
Related
I am quite new to Linux so I'm sorry for my newbie question,
but for about and hour now I'm trying to add Node.js to $PATH with no luck :(
I've used the following line to add Node
PATH=$PATH:node-v0.10.24-linux-arm-armv6j-vfp-hard/bin
it worked, but when I logged off the terminal and logged in again, the path disappeared.
Later I tried adding the same line to .profile , .logins.defs and .bashrc.
All didn't work so I removed the line.
Please help me with this!
P.S , when I added the line to .profile I was able to call Node, but when I changed my directory in order to navigate to a Node project directory, I received the following error:
-bash: node-v0.10.24-linux-arm-armv6j-vfp-hard/bin/node: No such file or directory
You should add an absolute path, not a relative one. You added this to your path: node-v0.10.24-linux-arm-armv6j-vfp-hard/bin. That's a relative path, not an absolute one (absolute paths start with a /). You can change your line to:
PATH=$PATH:DIR/node-v0.10.24-linux-arm-armv6j-vfp-hard/bin
where DIR is the full path of the directory containing node-v0.10.24-linux-arm-armv6j-vfp-hard.
It's probably a good idea for you to read a bit on how this all works - it's not that complicated once you see it explained. See https://superuser.com/questions/238987/how-does-unix-search-for-executable-files for an example.
You have $HOME already set to your home directory.
So you can use this in your .profile:
PATH="$PATH:$HOME:$HOME/bin:$HOME/node-v0.10.24-linux-arm-armv6j-vfp-hard/bin"
If you set it as an absolute path you will not be able to copy that .profile to another user who is set up similarly.
I see there is another question that deals with installing node.js on Debian - and must admit I am surprised it is installed per-user. So if you do the install for another login you might want to copy your .profile to the new login to solve this same issue. There would be no per-user editing required if you use the $HOME variable like this. Just a simple copy or cut and paste.
For reference, here is that other question/answer: install node.js on debian
I installed tcl to learn it, however, I installed all the files in the wrong location. I am trying to uninstall it, But the uninstall file does not work. I am trying to carry out the instructions form their website:
To uninstall ActiveTcl, run the "uninstall.tcl" script that is located in the directory where you extracted the ActiveTcl archive. Note that you must use the "wish" in the distribution you wish to uninstall. For example:
% /path/Tcl/bin/wish /path/Tcl/lib/ppm/log/ActiveTcl/uninstall_ActiveTcl.tcl
stored, by default, in the directory /lib/ppm/log/ActiveTcl. You must use the wish interpreter from the distribution you wish to uninstall. Ensure that you do not run the uninstall script from a directory that will be removed during the uninstallation.
For example:
% /path/Tcl/bin/wish /path/Tcl/lib/ppm/log/ActiveTcl/uninstall_ActiveTcl.tcl
Note: if you are uninstalling both ActiveTcl and Tcl Dev Kit, uninstall Tcl Dev Kit before uninstalling ActiveTcl.
There is no uninstall_ActiveTcl.tcl. I do see an "uninstall" file but it does not have an extension, and I do not know how to run it.
Any help is appreciated
Thank you
Try editing the file to a uninstall.tcl file and see if that works. Take a back-up first though. Because we might need that file later
I re-installed it in a new location, compared the files that were installed between the old and the new location and deleted the file sin the old location. Unfortunately I could not delete many of the hidden files, as I did not know if they were there originally or if they belonged to Tcl. I am really surprised and disappointed there is no easy way to uninstall tcl properly.
I strongly suspect that you should uninstall ActiveTcl as follows:
Open a command prompt
Change directory to where you found the install file - e.g.
$ cd path_to_Tcl_installation/bin
Run the file
$ ./uninstall
On linux systems, you don't need any particular file extension in order to be able to run a file.
I don't know CentOS but a little googling led me to a forum thread that describes how to open a command prompt.
Good luck
Im a newbie to linux so please dont get annoyed with this basic question.
I searched internet about it but all i could find was the installation instructions.
Can someone tell me where is the program installed when installing from .bin file?
Thanks in advance.
You can use find and Xargs commands for locate files that have been installed. You can use for instance find directory -nmin Number_of_minutes to see which files were modified in some directory in last Number_of_minutes. Xargs is a command "used to build and execute command lines". You can combine that twho command to list the files, as shown in find and Xargs using, but you try it first in root directory or you can limit to /bin.
I am trying to install critlib on my machine (http://equi4.com/critlib/), so that I can create zip files dynamically in Tcl.
The issue is that I have no idea how to install Tcl packages. Is there a certain place you put the folders? Is there a command like yum I can use?
I've skimmed the various Tcl beginners guides and read the sections about packages, but every source always seems to be assuming knowledge I lack.
Yes, there are some directories. To list them, execute tclsh and enter
join $auto_path \n
In each of that directory and its subdir (but not the sub-sub-dir) tcl looks for a file called pkgIndex.tcl.
So if you got an archive, extract it, look where the pkgIndex.tcl is, and copy the directory where this file is in to one of the paths $auto_path. The problem is only to select the appropiate path from the output of step 1.
If you are not sure what the appropiate directory is, I suggest editing the output from the first step into your question.
If you are using vscode and made virtual environment then you can do it as follows
"pipenv install tcl"
I am trying to install mod_java on ubuntu.
I have installed the latest java(1.6).
I have configured freeswitch with mod_java module enabled in module.conf.xml
then when i run the make file, it says:
freeswitch_java.h:5:17: error: jni.h: No such file or directory
I have searched through the java installtion folders, but did not find any include folder or jni.h.
Can anyone help, what is being the problem here.
Thanks for reading this question.
I had the same problem. The solution was to run configure with the option --with-java:
./configure --with-java=/usr/lib/jvm/java-1.6.0-openjdk/include/
I don't know if it makes any difference but I added mod_java after building freeswitch without it. It was disabled in my initial build in module.conf.xml but afterwards I ran the above command plus:
make mod_java-install
It worked for me on ubuntu with openjdk. Are you using the Sun JDK? Maybe in the version you have dont have the include folder which has the source files. Try installing the other JDK. Or try and see of ther are some other related packages in apt that will get you the include folder.
Type this linux command to locate your jni.h file on your filesystem.
locate jni.h
you should be able to get it somewhere
in /usr/lib/java directory or some other directory
depending upon your java home.
copy paste the jni.h in src/include folder of your freeswitch src.
It will throw you some more errors for different .h files
just copy all of them to your src/include folder.
in latest freeswitch, installing through Makefile, its not possible to configure as the Makefile downloads and installs. Its possible by modifying the Makefile.in file to add the include path
mod_java_la_CPPFLAGS
-I/usr/lib/jvm/default-java/include \