How to get file information like sampling rate, bit rate etc of .raw audio files using terminal in linux? Soxi works for .wav files but it isn't working for .raw.
If your life depended on discovering an answer you could make some assumption to tease apart the unknowns ... however there is no automated way since the missing header would give you the easy answers ...
The audio analysis tool called audacity allows you to open up a RAW file, make some guesses and play the track
http://www.audacityteam.org
In audacity goto File -> Import -> Raw Data...
Above settings are typical for audio ripped from a CD ... toy with trying stereo vs mono for starters.
Those picklist widgets give you wiggle room to discover the format of your PCM audio given that the source audio is something when properly rendered is recognizable ... would be harder if the actual audio was noise
However if you need a programmatic method then rolling your own solution to ask those same questions which appear in above window is possible ... is that what you need or will audacity work for you ? We can go down the road of writing code to play off the unknowns mentioned in #Frank Lauterwald's comment
To kick start discovering this information programmatically, if the binary raw audio is 16 bit then each audio sample (point on the audio curve) will consume two bytes of your PCM file. For mono audio then the following two bytes would be your next sample, however if its stereo then these two following bytes would be the sample from the other channel. If more than two channels then just repeat. Typical audio is little endian. Sampling rate is important when rendering the audio, not when programmatically parsing raw bytes. One approach would be to create an output file with a WAV header followed by your source PCM data. Populate the header with answers from your guesswork. This way you could listen to this output file to help confirm your guesses.
Here is a sample 500k mono PCM audio file signed 16 bit which can be imported into audacity or used as input to rolling your own identification code
The_Constructus_Corporation_Long_Street-ycexQvMy03k_excerpt_mono.pcm
Related
I am pretty new with processing audio file. '
I want to build a web app that can take audio file and turn the into visualization for user like this https://github.com/CrowdCurio/audio-annotator
Right now I want to research on visualize audio datas. Original data that was stored in S3 come in two form .ts and .flac. That's why I want to ask if there's any visualization tool which can directly use .ts or .flac audio file.
Because right now the solution I think of will be first convert them into .wav or .mp3, so most visualization tool can process them, but .wav file is really storage-wasting as far as I know.
So if you know any approach or tool to do this. Please let me know!
Audio visualization requires audio data. Your compressed audio isn't audible until decoded. Therefore, you must decode them to PCM before visualizing.
This doesn't require that you store the files as WAV, but you'll at least have to decode them on-the-fly.
guys!
I've been asked at work to prepare a large audio library for tests, which includes different files of HE-AACv1 & HE-AACv2. To be specific, all sample rates from 8000 up to 48000 and bit rates from 8 bit to 32 bit. But I've been digging the internet for a while and can't find the exact information. Is it even possible to make HE-AAC with 8KHz sample rate? And are there any tools that allow to directly set this specific values (bit rate and sample rate)? I've tried adobe audition, audacity and a bunch of something I found on google, but neither gives me opportunities that I need, or it's just me being dumb.
Please, if you know the way to create a HE-AACv1 and v2 from for example mp3 or wav, tell me how to do it, I would be very grateful.
Thx!
Adobe Audition can definitely create all WAVs that you need, look under "Edit->Convert sample type". You should first create your wav files, and then use some encoder to transcode to AAC.
im trying to write a little client for rtmp(audio only). so far i got the communication working (red5 server) but now im stuck with the audio data.
the server is sending in MP3 44KHz 16bit stereo.
i get my Audiomessage which consists of the byte identifying the codec (0x2f) and the audio data which looks for example like this
ff:fb:92:64:eb:80:03:98:58:d2:e9:26:1b:7e:5d:e7:4a:1a:19:26:5c:8b:89:07:47:44:98:6b:91:2d:9c:28:b4:33:15:70:82:c9:29:87:8d:e4:8f:31:83:84:7b:e5:82:b5:57:62:00:02:e5:bb:f1:86:15:7a:8f:da:9e:ca:4f:83:9d:0a:c4:56:7b:b3:3d:56:43:ba:2b:28:b8:9d:0c:e1:82:0c:08:36:24:f3:39:67:54:b7:41:d9:8e:ef:36:96:56:22:d2:b9:9f:ae:40:43:8e:ea:39:52:0c:a4:48:25:02:54:91:c7:35:37:2d:be:f2:37:23:61:65:35:d9:0f:aa:18:b4:37:d9:d4:c8:68:21:3c:bd:ea:c1:d0:98:df:eb:96:59:99:88:09:37:36:c3:8b:47:80:64:84:41:ba:35:ea:a6:0a:d6:74:9e:09:f6:a5:d7:3f:1f:53:d8:fb:8d:d9:d3:f8:ee:c7:c1:68:25:25:8e:ae:6a:1c:08:52:9d:58:cf:cf:87:c1:ba:a4:f0:63:76:b0:b4:65:79:1b:3b:21:5f:2f:b5:7a:18:43:af:f7:fd:15:0c:87:c9:73:54:95:22:94:cc:cb:e3:da:4d:e0:f3:8a:95:69:69:eb:32:71:57:08:49:76:e0:f3:84:8c:4b:4c:84:6b:5d:7a:c8:c9:d7:df:d5:e2:68:bb:5f:6c:9f:ba:f4:0a:6c:6e:51:8a:b3:59:9a:07:0c:e4:2a:9d:ec:d1:99:53:48:f2:8b:22:b2:d3:bf:e1:5b:9f:ee:49:9f:2c:ee:63:1f:6f:da:90:e7:65:00:55:99:97:77:b9:e8:97:43:81:fd:32:e4:81:20:d0:78:f5:4f:59:47:39:f2:57:5d:f4:d5:91:48:c9:45:10:52:49:4d:04:87:6b:0e:a5:72:ed:34:74:08:93:5b:8a:54:3a:d9:7e:53:8f:c7:5e:b1:99:f3:55:63:72:49:99:55:3a:b8:0d:73:3b:2a:ea:9a:b5:32:d2:3b:61:c2:4e:e9:56:78:99:14:4a:a7:46:f4:ee:ae:6f:ff:c8:85:2d:07:68:ad:e2:84:dd:0a:bd:2e:93:12:43
i dont find a little thing about the data format. as the first byte is always 0xff i assume every chunk of audio data has a little header describing its contents.
the rtmp spec from adobe doesnt loose a single word about the format of the audio message package (just two lines saying its an audio message... wow).
does anyone know the format for the audio messages or at least a source where i find something?
The Adobe spec doesn't document the elementary stream formats because they are covered in their own documents, and usually quite large. MP3 is covered by ISO/IEC 11172-3.
There is a good rundown available here:
http://www.mpgedit.org/mpgedit/mpeg_format/mpeghdr.htm
I'm wondering if it's possible to draw an audio channel of a video or audio file as an image using ffmpeg, or if there's another tool that would do it on Win2k8 x64. I'm doing this as part of an encoding process after a user uploads a video or audio file.
I'm using ColdFusion 10 to handle the upload and calling cfexecute to run ffmpeg.
I need the image to look something like this (without the horizontal lines):
You can do this programmatically very easily.
Study the basics of FFmpeg. I suggest you to compile this sample. It explains how to open a video/audio, identify the streams and loop over the packets.
Once you have the data packet (in this case you are interested only in the audio packets). You will decode it (line 87 of this document) and obtain the raw data of an audio. It's the waveform itself (the analogue "bitmap" for an audio).
You could also study this sample. This second example is how to write a video/audio file. You don't want to write any video, but with this sample you can easily understand how the audio raw data packet works, if you see the functions get_audio_frame() and write_audio_frame().
You need to have some knowledge about creating a bitmap. Any platform has an easy way to do that.
So, the answer for you: YES, IT IS POSSIBLE TO DO THIS WITH FFMPEG! But you have to code a little bit in order to get what you want...
UPDATE:
Sorry, there are ALSO built-in features for this:
You could use those filters... or
showspectrum, showwaves, avectorscope
Here are some examples on how to use it: FFmpeg Filters - 12.22 showwaves.
I have a program that captures and stores H.264 encoded video as well as audio into a proprietary format file. I need to be able to export that video and audio to an mp4 file. I prefer C# but will use C++ if necessary. Any suggestions?
To produce MPEG-4 Part 14 .MP4 file you need a multiplexer. There is a choice of multiplexers out there:
FFmpeg (libavformat)
DirectShow filters (free and open source from GDCL, commercial)
Windows 7+ Media Foundation file sink
API and complexity might vary because some of multiplexers are expected to be a part of pipeline, they are not completely standalone classes. You might want to check respective samples (and license agreements, perhaps, too) to see what is best for you.
Take a look at libmp4v2. Fairly straightforward to use..
http://code.google.com/p/mp4v2/