js site which i deployed on Azure.
Site was working fine but i made some changes but changes not appearing on the site. How to restart or clear site cache on Azure portal.
One more thing that post methods are not working in this site as well how to enable post method in Azure ?
I already tried to restart my web app from Azure portal but not success.
Posted my issue https://social.msdn.microsoft.com/Forums/en-US/090831ae-41ff-4091-a7ec-466041904c10/nodejs-app-restart-cache-issue?forum=windowsazurewebsitespreview here as well
First of all, you could restart your app by following steps below on Azure portal.
In the Azure Portal, open the blade for the web app.
Click Overview.
Click Restart button to restart your app.
Secondly, you could check the code whether it has been changed on Azure with Kudu which could be accessed via https://<yourwebsitename>.scm.azurewebsites.net/DebugConsole.
Then cd to site/wwwroot folder, you will now be able to see your application files.
By default, Azure doesn't restrict any HTTP request method. Maybe you have made a mistake in configuring web.config file, which can be found on this article. You can check this official guide if needed.
Related
Landing Page of my web app
I have published my asp.net core mvc project in the Azure as web app, however it doesn't show anything. Instead of this it just shows the landing page as there was no code (which is not the case). I have checked few points on stackoverflow, but couldn't find anything, could anyone please help me with that?
There are few reasons causing it, you could refer to the following and troubleshoot it.
Go to your kudu site to check whether all your project file have uploaded to azure.
After publishing webapp to azure, wait for a moment.
Make sure you default page is listed in here and is above hostingstart.html
Deploy Continuous to Azure App Service.
Update:
Delete app and republish it.
I'm using VS 2013 and SDK 2.2 to deploy to App Services, the site opens in it's address and show the message "This web app has been successfully created".
Like when there is no code in the cloud app. although I can enter the App Service Editor, and see the code is there.
Localy I run the site and it show the Home/index page, but not in the cloud.
It was fine before, until I remove the web project and created another one with the same name instead.
Hope all this clause help to solve..
Since I try to redeploy, the SDK assumed some files are already exists and did not reload them.
They were probably corrupted.
The solution was to delete the complete deplyment, the wwroot directory and redeploy.
Is it a job attached to a web app, or is it a type of web app itself? I tried following this example but couldn't find the add webjobs link it mentioned, just links to create a web app.
https://azure.microsoft.com/en-us/documentation/articles/web-sites-create-web-jobs/
Yes, a job is "attached" to a Web App. A Web App is the execution container for WebJobs. In some cases you might also have a companion website also running in the WebApp, but often, the Web App only contains WebJobs.
Once you have a Web App, you can create/manage WebJobs via the portal "WebJobs" blade in the new portal. You'll find it in the Settings blade under "Features".
Another way to think of a Web Job is as an extra .exe/process that runs on the same VM as your web app, with the only special thing being that it is launched with the same set of environment variables as the web app and has access to the same set of directories.
There's a great post here explaining WebJobs and how to create/operate one. Everything you need to know to get going.
I Used Azure Website Migration Assistance to migrate my web service that was running on my Local VM's IIS. My Migration process was successful and also I was able to use this web service. But I can't find where to find the migrated source code in azure portal. All I can see is some 20Mb of data in on the dashboard graph of azure portal. If I need to changed some of my code where to do this?
What is on the Azure Web App should now match what was on your IIS server. Now, to update the web app, you can use the deployment techniques here: https://azure.microsoft.com/en-us/documentation/articles/web-sites-deploy/
The simplest method to deploy to check what content is on your web app would be to use the SCM site. This is available at: https://your-site-name.scm.azurewebsites.net. Go to Debug Console > CMD and then the site > wwwroot folder to see your web app content. You can also upload to the site via drag and drop.
Alternatively, you can download the publishing settings for your web app via the portal and then re-use the migration tool, select the site, and then upload the publishing settings. However I would suggest using the deployment techniques above first. (Disclaimer: I wrote the migration tool.)
There are multiple ways to push changes to your Azure Website/Web App. They are listed here: https://azure.microsoft.com/en-us/documentation/articles/web-sites-deploy/
One simple way is to use an FTP client like FileZilla. In the classic portal, you will find the FTP address (hostname) and the credentials in the dashboard tab. In the new portal, select your Web App and the FTP address will be displayed in the Essentials section at the top of the page. Click on Settings and Deployment credentials to set your FTP user password.
Another simple alternative is to use Dropbox. Take a look at this video for how to set instructions: https://channel9.msdn.com/Series/Windows-Azure-Web-Sites-Tutorials/Dropbox-Deployment-to-Windows-Azure-Web-Sites
I have an app deployed to Azure and it uses ADFS (Active Directory Federated Services) for authentication.
When the user tries to navigate to the app on Azure, it redirects the user to the ADFS authentication page. User enters their credentials and clicks OK, and ADFS redirects the user to the landing page of my app.
Everything is working fine up to this point. I'm getting a generic server error on the app once the user hits the landing page. PROBLEM: I need to see the detailed errors. I try setting <customErrors="off" />, repackage my app and redeploy, but that doesn't give me detailed errors:
Here's what I've tried: I've tried packaging my app in Debug mode (after Release mode didn't work), I've edited both web.config's (in the root of the solution, as well as in the Views folder, just to cover all bases). Nothing worked.
What am I doing wrong?
A couple of things to try:
Are you SURE the customerErrors attribute is set correctly? The
Identity and Access tooling in Visual Studio seems to like to reset
that back to "Off" (every time you update via the tool).
Are you able to connect to the role instance via Remote Desktop? If
so, you could inspect the web.config settings for the site?
Browsing to the site from the server might also provide a more
friendly error message.
When you RDP into the cloud service, you can look at the Event
Viewer to see the detailed error messages.
I fixed this error by ftp'ing into my azure website and deleting the wwwroot folder and then publishing my website via visual studio.