I'm curious how does PDF securing work? I can lock PDF file so system can't recognize text and manipulate with PDF file. Everything I found was about "how to lock/unlock" however nothing about "how does it work". Is there anyone who could explain it to me? Thx
The OP clarified in a comment
I mean lock on text recognition or manipulation with PDF file. There should be nothing about cryptography imho just some trick.
There are some options, among them:
You can render the text as a bitmap and include that bitmap in the PDF
-> no text information.
Or you can embed the font in question using a non-standard encoding without using standard glyph names
-> text information in an unknown encoding.
E.g. cf. the PDF analysed in this answer.
A special case: make the encoding wrong only for a few characters, maybe just one, probably a digit. This way an unalert person thinks everything was extracted ok, and only when the data is to be used, the errors start screwing things up, something which especially in case of wrong digits is hard to fix. E.g. cf. the PDF analysed in this answer.
Or you can put text in structures where text extraction software or copy&paste routines usually don't look, like creating a large pattern tile containing the text for some text area and filling the area with the matching pattern color.
-> text information present but not seen by most extractors.
E.g. cf. this answer; the technique here is used to make the text of a watermark non-extractable.
Or you can put extra text all over the page but make it invisible, e.g. under images, drawn in rendering mode 3 (invisible), located in some disabled optional content group (layer), ... Text extractors often do not check whether the text they extract actually is visible.
-> text information present but polluted by garbage text bits.
...
Related
I have a selection of pdfs that I want to text mine. I use tika to parse the text out of each pdf and save to a .txt with utf-8 encoding (I'm using windows)
Most of the pdfs were OCR'd before I got them but when I view the extracted text I have "pnÁnn¿¡c" instead of "Phádraig" if I view the PDF.
Is it possible for me to verify the text layer of the PDF (forgive me if thats the incorrect term) Ideally without needing the full version of Acrobat
It sounds like you are dealing with scanned books with "hidden OCR", ie. the PDF shows an image of the original document, behind which there is a layer of OCRed text.
That allows you to use the search function and to copy-paste text out of the document.
When you highlight the text, the hidden characters become visible (though this behaviour maybe depends on the viewer you use).
To be sure, you can copy-paste the highlighted text to a text editor.
This will allow you to tell if you are actually dealing with OCR quality this terrible, or if your extraction process caused mojibake.
Since OCR quality heavily depends on language resources (dictionaries, language model), I wouldn't be surprised if the output was actually that bad for a low-resource language like Gaelic (Old Irish?).
I'd like to make a custom lasered label from a user's input on a website. I have a template dxf file and I'd like to replace placeholder text with the user input. My problem is the dxf file format is very unreadable in its text format. Is there any way to make sense of the numeric data? If not are there any other formats (svg, etc) that would be easier to work with?
EDIT: The reason I've found it unreadable in terms of text is that the program (Solidworks) converted the text to curves.) At this point I'm trying to figure out how to prevent that.
AutoDesk was nice enough to document DXF syntax in great detail. Spend a couple hours understanding the documentation from the link below, and I think you will find it quite easy to parse and edit using code.
To just replace some placeholder text, it should be just as simple as reading the DXF file into a string (a dxf file is no different than a txt file), performing a text replace operation and saving it back to file. Just make sure that your placeholder text is very unique and is not contained in any of the key words in the document below (otherwise your DXF file will get corrupted). Something like "PlaceHolderText" will do the trick.
http://images.autodesk.com/adsk/files/autocad_2012_pdf_dxf-reference_enu.pdf
Edit: More Info
I do a lot of work with AutoDesk Inventor which is in direct competition with SolidWorks, so they are effectively the same tool. We were faced with a similar problem of needing to place text onto sheet metal flat pattern DXFs that came out of Inventor in order to identify the part, but Inventor simply could not do it (see, exactly the same!). One of our developers had the idea to place a very precise geometry punch onto the flat pattern. After the DXF was generated he wrote some code that parsed the DXF file and replaced the geometry with a text entity. More specifically we used a triangle with sides having each length defined to something like the 7th decimal place. You can then use one of the vertices of the triangle to position the text, including rotation. This process would be automatic, so once you write the code with the help of the document above (which won't take the long), it will just work. If your engraver can handle text the way you want it, I'd say this is a very good solution. We generate hundreds of parts every day using this code. Hope this helps.
I've used a linux function to convert a list of PDF files to text.
Command:
pdftotext -htmlmeta
This work well for most of my files.
but for a small amount of them, this return me a blank text file.
My unsuccesssfull pdf files were not encrypted, not securised by user / password and they were not read only.
Converting PDFs to text is not a well-defined process. It can work awesome or not at all, depending on the PDF input.
Why is this? Because a PDF's task is mainly to represent the optics of a document, not the textual contents. PDFs can be everything from a pure text with positional information up to a pure graphics of the glyphs of the letters of the text. In the latter case one would need to run an OCR on the input in order to receive text information. This is not done by tools like pdftotext.
Sometimes the text in the PDF is scattered throughout the file, e. g. because first all standard-font letters are mentioned in the PDF, then, later in the file, all the italics-font letters are mentioned (of course with positional information, so a reader of the optical representation won't notice this, even if standard and italics are mixed throughout the text on the page). To rearrange this mess to a fluent text is a major task not very many converters are capable of.
So I guess all you can do is try some more converters for PDF to text (some are better than others, and some are better just for some specific input) or see that you can get the text from another source than the PDF files.
As far as I can tell my question is not related to topics involved in Stenography or in the win.rar soluations I've seen to this where you are essentially hidding messages.
I am trying to figure out if there is a way to insert code into a file such as a jpg or png with a simple message, that could later be extracted by a program reading the file without having it encoded into the file either by slight differences in pixels or what have you in stenography.
I basically just want a tag along message that is a part of the file itself that is not brought up by the image reader but could perhaps be seen by a text reader of some kind.
I'm not sure how possible this is because I, for the most part don't understand the order/layout of the png/jgp/ect file aside from the RGB pixel code. How does it start, how does the image display tool know to stop displaying ect.
The way I'm envisioning it would be something like:
pngStartCode -> RGBinfo --> png end code so image reader knows to stop -> start sequence that some kind of reader will recognize (possibly a new text reader) -> written text wanted to be communicated -> endcodeforreader
I may just be rambling about something ridiculous here but please let me know if this is at least possible.
You can use following command(Windows command prompt)
Create a text file with your message, say "message.txt"
Now choose target file(it can be any file like a.jpg,a.png,a.exe,..etc), say "image.jpg"
Now execute follwing command
copy /b "image.jpg"+"message.txt" "NewImage.jpg"
Above command will combine files(in binary mode) and creats a new file(in this case NewImage.jpg). Now if anyone opens image they will just see noraml image. If you want to look at text, you have open it with any text editor(Notepad) and scroll down to last, there you can find text.
Here it wont chage any pixels or any thing to image, it just appends text to image.
It sounds like OP is asking about comment tags in the PNG specifications (i.e. adding data but without intent to hide it).
PNG files are broken into "Chunks". The image part is usually divided into several IDAT chunks; the color, size, etc are stored in an IHDR chunk, etc.
The iTXt, tEXt, and zTXt chunks are used for conveying text information associated with the image, so typically you'd look into using a tool to add those types of chunks. tEXt is for just plain text, zTXt is compressed.
More info on the PNG specification including what kinds of chunks are available can be found here, and you find chunk viewers on google.
For convenience at preset time (January 2021) here are a couple tools that will let you view, edit, and add chunks:
Windows 10: http://entropymine.com/jason/tweakpng/
Linux: https://www.systutorials.com/docs/linux/man/n-png/
Mac: https://apps.apple.com/us/app/inspectpng/id498851708?mt=12
NOTE: I do not vouch for the safety of any of the above links. Please use standard caution when downloading any file from the internet. If you don't have your own anti-virus, Virustotal has one online you can upload individual files to for free.
My problem:
I have a pdf with lots of roman characters with complex diacritical marks (e.g., ṣ, ś, ṝ, ǎ, etc.). To make it easier to search within the pdf, I would like to add an additional layer, much as one does with hocr, where the same text is present without the diacritics.
When using full-text search engines I can index multiple terms at the same position (vector) - I would like to achieve the same effect here.
I have read lots about adding a hocr layer to scanned images, but I really just want to duplicate the text layer, pass it through a script that strips the diacritics (straightforward enough) and then adds it back in as a hidden but searchable layer.
Anyone have any suggestions? (Solutions involving any platform, language, library or toolchain will be useful!)
Thanks :)
Edit: please let me know if the question is unclear.
Well I have a (slightly ugly and hackish) solution, so I thought I'd share it.
I'm using PDFMiner to extract the text, along with the co-ordinates. Then I'm using ReportLab to write the normalized versions of the text to a new pdf, in exactly the same position, as hidden text. To make the positions line up properly, I found I had to use exactly the same font, so I've used a combination of FontForge and MuPDF to extract the required font(s) from the original pdf.
Finally, having created the new pdf, I'm using pdftk to merge it with the original.
It works pretty well, but has the downside that copying text out of the pdf results in the normalized text being copied too. But this is acceptable for my present purposes, and I can't see any way around it. The pdf spec. doesn't really support my objective, and so I don't imagine I can do better than this hackish solution.
I have written something similar to add searchable text by OCR'ing images and converting it to PDF in C#. I used QuickPDF from www.quickpdf.com to create hidden white text objects on top of the image and this worked reasonably well.
In your case QuickPDF would allow you to extract the text strings along with bounding boxes and font details. You could then normalize your text and create the invisible text objects using the existing font and position information and then save it out to a new file.
This would basically give you the same PDF as you have now and also give you both the original and normalised text as you are getting now.
QuickPDF is a commercial library. If your solution works well for you then there is no used buying a commercial engine though. The nice thing though is that it only requires 1 SDK and you would look at it if you had a more than a few PDF's to convert.