a.sh
#! /bin/sh
export x=/usr/local
we can do source ./a in command-line. But I need to do the export through shell script.
b.sh
#! /bin/sh
. ~/a.sh
no error... but $x in command-line will show nothing. So it didn't get export.
Any idea how to make it work?
a.sh
#! /bin/sh
export x=/usr/local
-----------
admin#client: ./a.sh
admin#client: echo $x
admin#client: <insert ....>
You can put export statements in a shell script and then use the 'source' command to execute it in the current process:
source a.sh
You can't do an export through a shell script, because a shell script runs in a child shell process, and only children of the child shell would inherit the export.
The reason for using source is to have the current shell execute the commands
It's very common to place export commands in a file such as .bashrc which a bash will source on startup (or similar files for other shells)
Another idea is that you could create a shell script which generates an export command as it's output:
shell$ cat > script.sh
#!/bin/sh
echo export foo=bar
^D
chmod u+x script.sh
And then have the current shell execute that output
shell$ `./script.sh`
shell$ echo $foo
bar
shell$ /bin/sh
$ echo $foo
bar
(note above that the invocation of the script is surrounded by backticks, to cause the shell to execute the output of the script)
Answering my own question here, using the answers above: if I have more than one related variable to export which use the same value as part of each export, I can do this:
#!/bin/bash
export TEST_EXPORT=$1
export TEST_EXPORT_2=$1_2
export TEST_EXPORT_TWICE=$1_$1
and save as e.g. ~/Desktop/TEST_EXPORTING
and finally $chmod +x ~/Desktop/TEST_EXPORTING
--
After that, running it with source ~/Desktop/TEST_EXPORTING bob
and then checking with export | grep bob should show what you expect.
Exporting a variable into the environment only makes that variable visible to child processes. There is no way for a child to modify the environment of its parent.
Another way you can do it (to steal/expound upon the idea above), is to put the script in ~/bin and make sure ~/bin is in your PATH. Then you can access your variable globally. This is just an example I use to compile my Go source code which needs the GOPATH variable to point to the current directory (assuming you're in the directory you need to compile your source code from):
From ~/bin/GOPATH:
#!/bin/bash
echo declare -x GOPATH=$(pwd)
Then you just do:
#> $(GOPATH)
So you can now use $(GOPATH) from within your other scripts too, such as custom build scripts which can automatically invoke this variable and declare it on the fly thanks to $(pwd).
script1.sh
shell_ppid=$PPID
shell_epoch=$(grep se.exec_start "/proc/${shell_ppid}/sched" | sed 's/[[:space:]]//g' | cut -f2 -d: | cut -f1 -d.)
now_epoch=$(($(date +%s%N)/1000000))
shell_start=$(( (now_epoch - shell_epoch)/1000 ))
env_md5=$(md5sum <<<"${shell_ppid}-${shell_start}"| sed 's/[[:space:]]//g' | cut -f1 -d-)
tmp_dir="/tmp/ToD-env-${env_md5}"
mkdir -p "${tmp_dir}"
ENV_PROPS="${tmp_dir}/.env"
echo "FOO=BAR" > "${ENV_PROPS}"
script2.sh
shell_ppid=$PPID
shell_epoch=$(grep se.exec_start "/proc/${shell_ppid}/sched" | sed 's/[[:space:]]//g' | cut -f2 -d: | cut -f1 -d.)
now_epoch=$(($(date +%s%N)/1000000))
shell_start=$(( (now_epoch - shell_epoch)/1000 ))
env_md5=$(md5sum <<<"${shell_ppid}-${shell_start}"| sed 's/[[:space:]]//g' | cut -f1 -d-)
tmp_dir="/tmp/ToD-env-${env_md5}"
mkdir -p "${tmp_dir}"
ENV_PROPS="${tmp_dir}/.env"
source "${ENV_PROPS}"
echo $FOO
./script1.sh
./script2.sh
BAR
It persists for the scripts run in the same parent shell, and it prevents collisions.
I want to execute a long running command in Bash, and both capture its exit status, and tee its output.
So I do this:
command | tee out.txt
ST=$?
The problem is that the variable ST captures the exit status of tee and not of command. How can I solve this?
Note that command is long running and redirecting the output to a file to view it later is not a good solution for me.
There is an internal Bash variable called $PIPESTATUS; it’s an array that holds the exit status of each command in your last foreground pipeline of commands.
<command> | tee out.txt ; test ${PIPESTATUS[0]} -eq 0
Or another alternative which also works with other shells (like zsh) would be to enable pipefail:
set -o pipefail
...
The first option does not work with zsh due to a little bit different syntax.
Dumb solution: Connecting them through a named pipe (mkfifo). Then the command can be run second.
mkfifo pipe
tee out.txt < pipe &
command > pipe
echo $?
using bash's set -o pipefail is helpful
pipefail: the return value of a pipeline is the status of
the last command to exit with a non-zero status,
or zero if no command exited with a non-zero status
There's an array that gives you the exit status of each command in a pipe.
$ cat x| sed 's///'
cat: x: No such file or directory
$ echo $?
0
$ cat x| sed 's///'
cat: x: No such file or directory
$ echo ${PIPESTATUS[*]}
1 0
$ touch x
$ cat x| sed 's'
sed: 1: "s": substitute pattern can not be delimited by newline or backslash
$ echo ${PIPESTATUS[*]}
0 1
This solution works without using bash specific features or temporary files. Bonus: in the end the exit status is actually an exit status and not some string in a file.
Situation:
someprog | filter
you want the exit status from someprog and the output from filter.
Here is my solution:
((((someprog; echo $? >&3) | filter >&4) 3>&1) | (read xs; exit $xs)) 4>&1
echo $?
See my answer for the same question on unix.stackexchange.com for a detailed explanation and an alternative without subshells and some caveats.
By combining PIPESTATUS[0] and the result of executing the exit command in a subshell, you can directly access the return value of your initial command:
command | tee ; ( exit ${PIPESTATUS[0]} )
Here's an example:
# the "false" shell built-in command returns 1
false | tee ; ( exit ${PIPESTATUS[0]} )
echo "return value: $?"
will give you:
return value: 1
So I wanted to contribute an answer like lesmana's, but I think mine is perhaps a little simpler and slightly more advantageous pure-Bourne-shell solution:
# You want to pipe command1 through command2:
exec 4>&1
exitstatus=`{ { command1; printf $? 1>&3; } | command2 1>&4; } 3>&1`
# $exitstatus now has command1's exit status.
I think this is best explained from the inside out - command1 will execute and print its regular output on stdout (file descriptor 1), then once it's done, printf will execute and print icommand1's exit code on its stdout, but that stdout is redirected to file descriptor 3.
While command1 is running, its stdout is being piped to command2 (printf's output never makes it to command2 because we send it to file descriptor 3 instead of 1, which is what the pipe reads). Then we redirect command2's output to file descriptor 4, so that it also stays out of file descriptor 1 - because we want file descriptor 1 free for a little bit later, because we will bring the printf output on file descriptor 3 back down into file descriptor 1 - because that's what the command substitution (the backticks), will capture and that's what will get placed into the variable.
The final bit of magic is that first exec 4>&1 we did as a separate command - it opens file descriptor 4 as a copy of the external shell's stdout. Command substitution will capture whatever is written on standard out from the perspective of the commands inside it - but since command2's output is going to file descriptor 4 as far as the command substitution is concerned, the command substitution doesn't capture it - however once it gets "out" of the command substitution it is effectively still going to the script's overall file descriptor 1.
(The exec 4>&1 has to be a separate command because many common shells don't like it when you try to write to a file descriptor inside a command substitution, that is opened in the "external" command that is using the substitution. So this is the simplest portable way to do it.)
You can look at it in a less technical and more playful way, as if the outputs of the commands are leapfrogging each other: command1 pipes to command2, then the printf's output jumps over command 2 so that command2 doesn't catch it, and then command 2's output jumps over and out of the command substitution just as printf lands just in time to get captured by the substitution so that it ends up in the variable, and command2's output goes on its merry way being written to the standard output, just as in a normal pipe.
Also, as I understand it, $? will still contain the return code of the second command in the pipe, because variable assignments, command substitutions, and compound commands are all effectively transparent to the return code of the command inside them, so the return status of command2 should get propagated out - this, and not having to define an additional function, is why I think this might be a somewhat better solution than the one proposed by lesmana.
Per the caveats lesmana mentions, it's possible that command1 will at some point end up using file descriptors 3 or 4, so to be more robust, you would do:
exec 4>&1
exitstatus=`{ { command1 3>&-; printf $? 1>&3; } 4>&- | command2 1>&4; } 3>&1`
exec 4>&-
Note that I use compound commands in my example, but subshells (using ( ) instead of { } will also work, though may perhaps be less efficient.)
Commands inherit file descriptors from the process that launches them, so the entire second line will inherit file descriptor four, and the compound command followed by 3>&1 will inherit the file descriptor three. So the 4>&- makes sure that the inner compound command will not inherit file descriptor four, and the 3>&- will not inherit file descriptor three, so command1 gets a 'cleaner', more standard environment. You could also move the inner 4>&- next to the 3>&-, but I figure why not just limit its scope as much as possible.
I'm not sure how often things use file descriptor three and four directly - I think most of the time programs use syscalls that return not-used-at-the-moment file descriptors, but sometimes code writes to file descriptor 3 directly, I guess (I could imagine a program checking a file descriptor to see if it's open, and using it if it is, or behaving differently accordingly if it's not). So the latter is probably best to keep in mind and use for general-purpose cases.
(command | tee out.txt; exit ${PIPESTATUS[0]})
Unlike #cODAR's answer this returns the original exit code of the first command and not only 0 for success and 127 for failure. But as #Chaoran pointed out you can just call ${PIPESTATUS[0]}. It is important however that all is put into brackets.
In Ubuntu and Debian, you can apt-get install moreutils. This contains a utility called mispipe that returns the exit status of the first command in the pipe.
Outside of bash, you can do:
bash -o pipefail -c "command1 | tee output"
This is useful for example in ninja scripts where the shell is expected to be /bin/sh.
The simplest way to do this in plain bash is to use process substitution instead of a pipeline. There are several differences, but they probably don't matter very much for your use case:
When running a pipeline, bash waits until all processes complete.
Sending Ctrl-C to bash makes it kill all the processes of a pipeline, not just the main one.
The pipefail option and the PIPESTATUS variable are irrelevant to process substitution.
Possibly more
With process substitution, bash just starts the process and forgets about it, it's not even visible in jobs.
Mentioned differences aside, consumer < <(producer) and producer | consumer are essentially equivalent.
If you want to flip which one is the "main" process, you just flip the commands and the direction of the substitution to producer > >(consumer). In your case:
command > >(tee out.txt)
Example:
$ { echo "hello world"; false; } > >(tee out.txt)
hello world
$ echo $?
1
$ cat out.txt
hello world
$ echo "hello world" > >(tee out.txt)
hello world
$ echo $?
0
$ cat out.txt
hello world
As I said, there are differences from the pipe expression. The process may never stop running, unless it is sensitive to the pipe closing. In particular, it may keep writing things to your stdout, which may be confusing.
PIPESTATUS[#] must be copied to an array immediately after the pipe command returns.
Any reads of PIPESTATUS[#] will erase the contents.
Copy it to another array if you plan on checking the status of all pipe commands.
"$?" is the same value as the last element of "${PIPESTATUS[#]}",
and reading it seems to destroy "${PIPESTATUS[#]}", but I haven't absolutely verified this.
declare -a PSA
cmd1 | cmd2 | cmd3
PSA=( "${PIPESTATUS[#]}" )
This will not work if the pipe is in a sub-shell. For a solution to that problem,
see bash pipestatus in backticked command?
Base on #brian-s-wilson 's answer; this bash helper function:
pipestatus() {
local S=("${PIPESTATUS[#]}")
if test -n "$*"
then test "$*" = "${S[*]}"
else ! [[ "${S[#]}" =~ [^0\ ] ]]
fi
}
used thus:
1: get_bad_things must succeed, but it should produce no output; but we want to see output that it does produce
get_bad_things | grep '^'
pipeinfo 0 1 || return
2: all pipeline must succeed
thing | something -q | thingy
pipeinfo || return
Pure shell solution:
% rm -f error.flag; echo hello world \
| (cat || echo "First command failed: $?" >> error.flag) \
| (cat || echo "Second command failed: $?" >> error.flag) \
| (cat || echo "Third command failed: $?" >> error.flag) \
; test -s error.flag && (echo Some command failed: ; cat error.flag)
hello world
And now with the second cat replaced by false:
% rm -f error.flag; echo hello world \
| (cat || echo "First command failed: $?" >> error.flag) \
| (false || echo "Second command failed: $?" >> error.flag) \
| (cat || echo "Third command failed: $?" >> error.flag) \
; test -s error.flag && (echo Some command failed: ; cat error.flag)
Some command failed:
Second command failed: 1
First command failed: 141
Please note the first cat fails as well, because it's stdout gets closed on it. The order of the failed commands in the log is correct in this example, but don't rely on it.
This method allows for capturing stdout and stderr for the individual commands so you can then dump that as well into a log file if an error occurs, or just delete it if no error (like the output of dd).
It may sometimes be simpler and clearer to use an external command, rather than digging into the details of bash. pipeline, from the minimal process scripting language execline, exits with the return code of the second command*, just like a sh pipeline does, but unlike sh, it allows reversing the direction of the pipe, so that we can capture the return code of the producer process (the below is all on the sh command line, but with execline installed):
$ # using the full execline grammar with the execlineb parser:
$ execlineb -c 'pipeline { echo "hello world" } tee out.txt'
hello world
$ cat out.txt
hello world
$ # for these simple examples, one can forego the parser and just use "" as a separator
$ # traditional order
$ pipeline echo "hello world" "" tee out.txt
hello world
$ # "write" order (second command writes rather than reads)
$ pipeline -w tee out.txt "" echo "hello world"
hello world
$ # pipeline execs into the second command, so that's the RC we get
$ pipeline -w tee out.txt "" false; echo $?
1
$ pipeline -w tee out.txt "" true; echo $?
0
$ # output and exit status
$ pipeline -w tee out.txt "" sh -c "echo 'hello world'; exit 42"; echo "RC: $?"
hello world
RC: 42
$ cat out.txt
hello world
Using pipeline has the same differences to native bash pipelines as the bash process substitution used in answer #43972501.
* Actually pipeline doesn't exit at all unless there is an error. It executes into the second command, so it's the second command that does the returning.
Why not use stderr? Like so:
(
# Our long-running process that exits abnormally
( for i in {1..100} ; do echo ploop ; sleep 0.5 ; done ; exit 5 )
echo $? 1>&2 # We pass the exit status of our long-running process to stderr (fd 2).
) | tee ploop.out
So ploop.out receives the stdout. stderr receives the exit status of the long running process. This has the benefit of being completely POSIX-compatible.
(Well, with the exception of the range expression in the example long-running process, but that's not really relevant.)
Here's what this looks like:
...
ploop
ploop
ploop
ploop
ploop
ploop
ploop
ploop
ploop
ploop
5
Note that the return code 5 does not get output to the file ploop.out.
command to redirect output to console and to a file at the same time works fine in bash. But how do i make it work in korn shell(ksh).
All my scripts runs on korn shell so cant change them to bash for this particular command to work.
exec > >(tee -a $LOGFILE) 2>&1
In the code beneath I use the variable logfile, lowercase is better.
You can try something like
touch "${logfile}"
tail -f "${logfile}"&
tailpid=$!
trap 'kill -9 ${tailpid}' EXIT INT TERM
exec 1>"${logfile}" 2>&1
A not too unreasonable technique is to re-exec the shell with output to tee. That is, at the top of the script, do something like:
#!/bin/sh
test -z "$REXEC" && { REXEC=1 exec "$0" "$#" | tee -a $LOGFILE; exit; }
I have stucked with a bash scipt which should write both to stdout and into file. I'm using functions and some variables inside them. Whenever I try to redirect the function to a file and print on the screen with tee I can't use the variables that I used in function, so they become local somehow.
Here is simple example:
#!/bin/bash
LOGV=/root/log
function var()
{
echo -e "Please, insert VAR value:\n"
read -re VAR
}
var 2>&1 | tee $LOGV
echo "This is VAR:$VAR"
Output:
[root#testbox ~]# ./var.sh
Please, insert VAR value:
foo
This is VAR:
[root#testbox ~]#
Thanks in advance!
EDIT:
Responding on #Etan Reisner suggestion to use
var 2>&1 > >(tee $LOGV)
The only problem of this construction is that log file dosn't receive everything...
[root#testbox~]# ./var.sh
Please, insert VAR value:
foo
This is VAR:foo
[root#testbox ~]# cat log
Please, insert VAR value:
This is a variant of BashFAQ #24.
var 2>&1 | tee $LOGV
...like any shell pipeline, has the option to run the function var inside a subprocess -- and, in practice, behaves this way in bash. (The POSIX sh specification leaves the details of which pipeline components, if any, run inside the parent shell undefined).
Avoiding this is as simple as not using a pipeline.
var > >(tee "$LOGV") 2>&1
...uses process substitution (a ksh extension adopted by bash, not present in POSIX sh) to represent the tee subprocess through a filename (in the form /dev/fd/## on modern Linux) which output can be redirected to without moving the function into a pipeline.
If you want to ensure that tee exits before other commands run, use a lock:
#!/bin/bash
logv=/tmp/log
collect_var() {
echo "value for var:"
read -re var
}
collect_var > >(logv="$logv" flock "$logv" -c 'exec tee "$logv"') 2>&1
flock "$logv" -c true # wait for tee to exit
echo "This is var: $var"
Incidentally, if you want to run multiple commands with their output being piped in this way, you should invoke the tee only once, and feed into it as appropriate:
#!/bin/bash
logv=/tmp/log
collect_var() { echo "value for var:"; read -re var; }
exec 3> >(logv="$logv" flock "$logv" -c 'exec tee "$logv"') # open output to log
collect_var >&3 2>&3 # run function, sending stdout/stderr to log
echo "This is var: $var" >&3 # ...and optionally run other commands the same way
exec 3>&- # close output
flock "$logv" -c true # ...and wait for tee to finish flushing and exit.
I would like to have a script wherein all commands are tee'd to a log file.
Right now I am running every command in the script thusly:
<command> | tee -a $LOGFILE
Is there a way to force every command in a shell script to pipe to tee?
I cannot force users to add appropriate teeing when running the script, and want to ensure it logs properly even if the calling user doesn't add a logging call of their own.
You can do a wrapper inside your script:
#!/bin/bash
{
echo 'hello'
some_more_commands
echo 'goodbye'
} | tee -a /path/to/logfile
Edit:
Here's another way:
#!/bin/bash
exec > >(tee -a /path/to/logfile)
echo 'hello'
some_more_commands
echo 'goodbye'
Why not expose a wrapper that's simply:
/path/to/yourOriginalScript.sh | tee -a $LOGFILE
Your users should not execute (nor even know about) yourOriginalScript.sh.
Assuming that your script doesn't take a --tee argument, you can do this (if you do use that argument, just replace --tee below with an argument you don't use):
#!/bin/bash
if [ -z "$1" ] || [ "$1" != --tee ]; then
$0 --tee "$#" | tee $LOGFILE
exit $?
else
shift
fi
# rest of script follows
This just has the script re-run itself, using the special argument --tee to prevent infinite recursion, piping its output into tee.
Some approach would be creation of runner script "run_it" that all users invoke their own scripts.
run_it my_script
All the magic would be done within, e.g. could look like that:
LOG_DIR=/var/log/
$# | tee -a $LOG_DIR/