Can any one give me the proper guidelines for gstreamer(1.8.0) installation in Ubuntu version 16.04??
Through command line
For installing gstreamer1.0 you can use:
sudo apt-get install libgstreamer1.0-* gstreamer1.0-tools gstreamer1.0-libav*
Depending on what are your needs, you probably are going to need other modules that are not installed in the previous command. I would consider adding:
gst-plugins-base
gst-plugins-good
gst-plugins-bad
gst-plugins-ugly
Using next command:
sudo apt-get install gstreamer1.0-plugins-base gstreamer1.0-plugins-good gstreamer1.0-plugins-ugly
After you have installed all the plugins you can verify the installation using:
gst-inspect-1.0
Related
I downloded android studio and I tried to install on ubuntu 16.04 64 bit but it has "unable to run mksdcard sdk tool" error.
I checked all solutions but they produce errors too.
Seems that the only package you need is lib32stdc++6 for ubuntu 16.04
sudo apt-get install lib32stdc++6
I just stumbled upon this issue myself.
I guess that you found this topic from 2015?
Well, the given solution is a bit outdated but still pertinent: the 64bit Ubuntu 16.04 is indeed missing the 32bits version of the libraries and the
lib32z1 lib32ncurses5 lib32bz2-1.0 lib32stdc++6 libraries advised to be installed seems to have been removed from the official repos.
However You can still get them with using this command:
sudo apt-get install libz1:i386 libncurses5:i386 libbz2-1.0:i386 libstdc++6:i386
Then the installer should work just fine
Hope it will be of any help.
take a look at https://developer.android.com/studio/install.html
Select Linux...
Required libraries for 64-bit machines:
If you are running a 64-bit version of Ubuntu, you need to install some 32-bit libraries with the following command:
sudo apt-get install libc6:i386 libncurses5:i386 libstdc++6:i386 lib32z1 libbz2-1.0:i386
If you are running 64-bit Fedora, the command is:
sudo yum install zlib.i686 ncurses-libs.i686 bzip2-libs.i686
For Ubuntu 18.04 and above versions, the following will work
sudo apt-get install libstdc++6:i386 libgcc1:i386 zlib1g:i386 libncurses5:i386
Ubuntu18.04
I tried installing libtiff 4.0.3 through using the commands:
./configure
make
make install
It installed fine. However, I recently found out that I got the versions wrong and so I need to install a new one with a different version. I'd like to how know to remove libtiff from my Ubuntu setup. Would it be the same as sudo apt-get remove [x]? And how do I know what to put on x if I didn't install it through sudo apt-get install [x] command? Would appreciate some help. Thanks. :)
You can't use apt-get to remove something that wasn't installed as a package. Try running make uninstall. – Blender
I installed QT-creator from a downloaded copy of qt-creator-linux-x86-opensource-2.6.1.bin using
sudo ./qt-creator-linux-x86-opensource-2.6.1.bin
in Ubuntu 11.04
I tried to add QT versions in QT-Creator/Build/QT-versions configuration and it asked for a qmake executable.
I installed it using:
sudo apt-get install qt4-devel
which deployed qmake in /usr/bin/qmake
I selected it in QT-Creator/Build/QT-versions configuration as manual, Qt-4.7.2 (System) /usr/bin/qmake-qt4 but QT version is not properly installed, please run make install message appears and I can't use it in QT-Creator/Build/Kits configuration.
How can I solve the problem and configure qmake for Qt-creator use in project creation?
This solved the problem for me on recent Ubuntu version:
sudo apt-get install qt5-default
Just so this no longer shows up as unanswered:
To install all qt-devel libraries, use
sudo apt-get install qt4-dev-tools libqt4-dev libqt4-core libqt4-gui
In Linux Mint 18.3 (32 bit) it also solved the problem:
sudo apt-get install qt5-default
So that Qt5 (5.5.1) was installed ready-to-use as a kit in QtCreator.
Although to install the Qt 5.9.0 version I had to explicitly download the package from https://download.qt.io/official_releases/qt/5.9/5.9.0/single/ (2 Gb unpacked) .
Then I had to run this command in terminal:
cd /home/username/Downloads/qt-everywhere-opensource-src-5.9.0
Then this command:
./configure
Then this
make
I was having this problem even after sudo apt-get install qt5-default (it was already installed).
However the version of QMake I had pointed to was in the Linux Processor SDK (02.00.02.11)
I fixed it by sourcing the environment setup before running qtcreator. The following shell script did it for me:
source /opt/ti/processor-sdk-linux-am335x-evm-02.00.02.11/linux-devkit/environment-setup
# substitute the location where the SDK is installed.
~/Qt5.9.0/Tools/QtCreator/bin/qtcreator -block
# substitute the location where QTCreator is installed
hello i have faced problem with libgcrypt and i am sure is is installed with newst version thats happen when i try to install libssh2
[root#loft1034 libssh2-1.1]#./configure
configure: error: cannot find OpenSSL or Libgcrypt,
try --with-libssl-prefix=PATH or --with-libgcrypt-prefix=PATH
[root#loft1034 libssh2-1.1]# locate libgcrypt
/usr/lib/.libgcrypt.so.11.hmac
/usr/lib/libgcrypt.so.11
/usr/lib/libgcrypt.so.11.5.2
/usr/lib64/.libgcrypt.so.11.hmac
/usr/lib64/libgcrypt.so.11
/usr/lib64/libgcrypt.so.11.5.2
[root#loft1034 libssh2-1.1]#
i try to using prefix path with no benefit please help me?
Install the package with the header files.
CentOS 6/7, perhaps Fedora:
sudo yum install -y libgcrypt-devel
Debian/Ubuntu:
sudo apt-get install -y libgcrypt11-dev
Try this (it works for Ubuntu 15.10 64 bit)
wget ftp://ftp.debian.org/debian/pool/main/libg/libgcrypt11/libgcrypt11_1.5.0-5+deb7u3_amd64.deb
sudo dpkg -i libgcrypt11_1.5.0-5+deb7u3_amd64.deb
If you are using centOS install libcrypt-devel:
sudo yum install libgcrypt-devel
For ubuntu(works for me)
Try to download the package first, download links, note choose the right architecture.
there take amd64 as an example.first we get the link address http://security.ubuntu.com/ubuntu/pool/main/libg/libgcrypt20/libgcrypt11-dev_1.5.4-3+really1.8.1-4ubuntu1.3_amd64.deb
On ubuntu, we download the package
wget http://security.ubuntu.com/ubuntu/pool/main/libg/libgcrypt20/libgcrypt11-dev_1.5.4-3+really1.8.1-4ubuntu1.3_amd64.deb
then install it
sudo dpkg -i libgcrypt11-dev_1.5.4-3+really1.8.1-4ubuntu1.3_amd64.deb
Maybe there are other dependencies need to install.
you can choose to install it one by one, or follow the tips
sudo apt --fix-broken install
I want to install Go. I prepared system for support language. But sadly, I can't find Bison and libc6-dev following this command.
sudo apt-get install bison ed gawk gcc libc6-dev make
Then I still can't find the suitable Mercurial for Ubuntu 8.10, which is followed this command.
apt-get install python-setuptools python-dev build-essential
Therefore everyone please guide what I should do in order to install Go completely. My OS is Ubuntu version 8.10. Notice you can post the direct link for me to get packets/files.
Mercurial can typically be installed with
sudo apt-get install mercurial
The package is in universe, which you may not have enabled. The full guide, if you need it, is available here:
https://help.ubuntu.com/community/Mercurial
After installing setuptools et al., the go installation instructions say that you should install mercurial with easy-install, i.e. sudo easy_install mercurial. Are you having trouble with easy_install?
In order to install go with Homebrew run the following command on the terminal:
$ brew install golang
To check the version of go run the following command:
$ go version
To see the location run:
$ which go
To uninstall go :
$ sudo apt-get remove golang-go