Related
This is a slightly more complicated issue than a simple =COUNTIF(rng,"*"&value&"*"), as found here.
I have a 2D array with cells containing data such as:
abc
def
abc def
ghi
abc,def,ghi
abcdef
ghi; def
..... and several other variations of this. I am trying to count exact matches of "abc", but I want the count to be inclusive of cells containing "abc def" and other like variations, however I can't just use the above simple COUNTIF formula since "abcdef" is not an acceptable match. The target string must stand alone or be separated from other text by an acceptable character in chars.
I think I've got this one 90% done, but the bit I need help with is combining all the possible acceptable variations of a target "name" into a flat range that I can then check my data source against for the COUNTIF. I've tried INDEX(r_1:r_8,idxRow,idxCol) and other familiar solutions that work on the sheet when referencing other ranges, but I'm new to using the =LET function. All of this works well when broken out into separate components on my spreadsheet, but I'm looking for a cleaner solution with =LET. See below for current formula:
=LET(rg, DataTable[[Q14_1]:[Q14_9]],
name, AU38,
chars, {" ",",",";"},
r, 8,
r_1, CONCATENATE(name,chars),
r_2, CONCATENATE(chars,name),
r_3, CONCATENATE(chars,name,chars),
r_4, CONCATENATE(name,chars,"*"),
r_5, CONCATENATE("*",chars,name),
r_6, CONCATENATE(chars,name,chars,"*"),
r_7, CONCATENATE("*",chars,name,chars),
r_8, CONCATENATE("*",chars,name,chars,"*"),
c, COUNTA(chars),
mSeq, SEQUENCE(r*c),
idxRow, 1+MOD(mSeq,r),
idxCol, INT((SEQUENCE(r*c)-1)/r)+1,
X, INDEX(**NeedHelpHere**,idxRow,idxCol),
SUM(COUNTIF(rg,name),COUNTIF(rg,X))
)
Give a try on below formula. If you have more delimiter like space, comma & others then you need to use more SUBSTITUTE() function.
=LET(x,FILTERXML("<t><s>"&SUBSTITUTE(SUBSTITUTE(A1:A7," ","</s><s>"),",","</s><s>")&"</s></t>","//s"),y,FILTER(x,x="abc"),SUM(--(y<>"")))
To learn about FILTERXML() please read this article from JvdV.
I've thought about this again and am posting a solution that fits my needs.
I don't need to index a single column of potential matches to then COUNTIF, I can just COUNTIF multiple times. Additionally, I was not taking into account different combinations of chars, I was only searching for the same chars on either side of the target (e.g. ",abc," when I should have also been looking for ",abc;"). Transposing the chars array on one side is a simple way of fixing this. It also turns out that "*"&target&"*" searches for "*target*" AND "target" (duh!), so I simplified further, removing duplicative possibilities.
My final formula is below, which counts the number of times target (by itself or surrounded by any acceptable chars) is present in a given rng:
=LET(rng, DataTable[Q14_1]:[Q14_9]]),
name, $A6,
chars, {" " , "," , ";"},
r_1, CONCATENATE(name,chars,"*"),
r_2, CONCATENATE("*",chars,name),
r_3, CONCATENATE("*",chars,name,TRANSPOSE(chars),"*"),
SUM(COUNTIF(rng,name),COUNTIF(rng,r_1),COUNTIF(rng,r_2),COUNTIF(rng,r_3))
)
I am not sure where to begin with the formula as I have gotten myself so confused with everything. I have a cell the contains "PON " or "PON: " or "PON = " then the actual PON (Example: PON 123467) I want to formula to return 123467 in the cell.
Examples What I want returned
I have PON 123467 for shoes 123467
I have PON: 234567-AB for food 234567-AB
I have PON - 569874-Weird for accessories 569874-Weird
I have PON = DOG-564-987 for dog food DOG-564-987
I am currently using Excel 365
Filterxml() will give you best companion here in this case. Try-
=FILTERXML("<t><s>"&SUBSTITUTE(FILTERXML("<t><s>"&SUBSTITUTE(A1," for","</s><s>")&"</s></t>","//s[1]")," ","</s><s>")&"</s></t>","//s[last()]")
Using FILTERXML, and testing for a substring following PON, you can try:
=FILTERXML("<t><s>"&SUBSTITUTE(TRIM(A1)," ","</s><s>") & "</s></t>","//s[contains(.,'PON')]/following-sibling::*[string-length(.)>2][1]")
Note that FILTERXML solution will cause a PON that is solely numeric, but with a leading zero, to drop the leading zero. Unfortunately, the xPath implementation in that function does not include the string() function
If dropping the leading zero might be a problem, you can add a character to the node that will force the number to be seen as a string. In the modified formula below, I use the unicode zero-width space, but there are others you can use. Note that this will count as a character for the string=length function, so be sure to maintain the >2 parameter:
=FILTERXML("<t><s>"&SUBSTITUTE(TRIM(A1)," ","</s><s>"&UNICHAR(8203)) & "</s></t>","//s[contains(.,'PON')]/following-sibling::*[string-length(.)>2][1]")
Because of the variablity in your data, that sometimes there are extraneous space-separated substrings between PON and your desired extract, the xpath:
locates the substring PON
returns all subsequent siblings that have a string-length of more than two (adjust if necessary)
returns the first sibling that meets that criterion.
You might try this formula.
=TRIM(LEFT(MID(A2,FIND(#{1,2,3,4,5,6,7,8,9},A2),100),FIND(" ",MID(A2,FIND(#{1,2,3,4,5,6,7,8,9},A2),100))))
It extracts the text between the first number and the first space following that number. The size of that extract is limited to 100 characters.
Is there an efficient way to identify the last character/string match in a string using base functions? I.e. not the last character/string of the string, but the position of a character/string's last occurrence in a string. Search and find both work left-to-right so I can't think how to apply without lengthy recursive algorithm. And this solution now seems obsolete.
I think I get what you mean. Let's say for example you want the right-most \ in the following string (which is stored in cell A1):
Drive:\Folder\SubFolder\Filename.ext
To get the position of the last \, you would use this formula:
=FIND("#",SUBSTITUTE(A1,"\","#",(LEN(A1)-LEN(SUBSTITUTE(A1,"\","")))/LEN("\")))
That tells us the right-most \ is at character 24. It does this by looking for "#" and substituting the very last "\" with an "#". It determines the last one by using
(len(string)-len(substitute(string, substring, "")))\len(substring)
In this scenario, the substring is simply "\" which has a length of 1, so you could leave off the division at the end and just use:
=FIND("#",SUBSTITUTE(A1,"\","#",LEN(A1)-LEN(SUBSTITUTE(A1,"\",""))))
Now we can use that to get the folder path:
=LEFT(A1,FIND("#",SUBSTITUTE(A1,"\","#",LEN(A1)-LEN(SUBSTITUTE(A1,"\","")))))
Here's the folder path without the trailing \
=LEFT(A1,FIND("#",SUBSTITUTE(A1,"\","#",LEN(A1)-LEN(SUBSTITUTE(A1,"\",""))))-1)
And to get just the filename:
=MID(A1,FIND("#",SUBSTITUTE(A1,"\","#",LEN(A1)-LEN(SUBSTITUTE(A1,"\",""))))+1,LEN(A1))
However, here is an alternate version of getting everything to the right of the last instance of a specific character. So using our same example, this would also return the file name:
=TRIM(RIGHT(SUBSTITUTE(A1,"\",REPT(" ",LEN(A1))),LEN(A1)))
How about creating a custom function and using that in your formula? VBA has a built-in function, InStrRev, that does exactly what you're looking for.
Put this in a new module:
Function RSearch(str As String, find As String)
RSearch = InStrRev(str, find)
End Function
And your function will look like this (assuming the original string is in B1):
=LEFT(B1,RSearch(B1,"\"))
New Answer | 31-3-2022:
With even newer functions come even shorter answers. At time of writing in BETA, but probably widely available in the near future, we can use TEXTBEFORE():
=LEN(TEXTBEFORE(A2,B2,-1))+1
The trick here is that the 3rd parameter tells the function to retrieve the last occurence of the substring we give in the 2nd parameter. At time of writing this function is still case-sensitive by default which could be handeld by the optional 4th parameter.
Original Answer | 17-6-2020:
With newer versions of excel come new functions and thus new methods. Though it's replicable in older versions (yet I have not seen it before), when one has Excel O365 one can use:
=MATCH(2,1/(MID(A1,SEQUENCE(LEN(A1)),1)="Y"))
This can also be used to retrieve the last position of (overlapping) substrings:
=MATCH(2,1/(MID(A1,SEQUENCE(LEN(A1)),2)="YY"))
| Value | Pattern | Formula | Position |
|--------|---------|------------------------------------------------|----------|
| XYYZ | Y | =MATCH(2,1/(MID(A2,SEQUENCE(LEN(A2)),1)="Y")) | 3 |
| XYYYZ | YY | =MATCH(2,1/(MID(A3,SEQUENCE(LEN(A3)),2)="YY")) | 3 |
| XYYYYZ | YY | =MATCH(2,1/(MID(A4,SEQUENCE(LEN(A4)),2)="YY")) | 4 |
Whilst this both allows us to no longer use an arbitrary replacement character and it allows overlapping patterns, the "downside" is the useage of an array.
Note: You can force the same behaviour in older Excel versions through either
=MATCH(2,1/(MID(A2,ROW(A1:INDEX(A:A,LEN(A2))),1)="Y"))
Entered through CtrlShiftEnter, or using an inline INDEX to get rid of implicit intersection:
=MATCH(2,INDEX(1/(MID(A2,ROW(A1:INDEX(A:A,LEN(A2))),1)="Y"),))
tigeravatar and Jean-François Corbett suggested to use this formula to generate the string right of the last occurrence of the "\" character
=TRIM(RIGHT(SUBSTITUTE(A1,"\",REPT(" ",LEN(A1))),LEN(A1)))
If the character used as separator is space, " ", then the formula has to be changed to:
=SUBSTITUTE(RIGHT(SUBSTITUTE(A1," ",REPT("{",LEN(A1))),LEN(A1)),"{","")
No need to mention, the "{" character can be replaced with any character that would not "normally" occur in the text to process.
Just came up with this solution, no VBA needed;
Find the last occurance of "_" in my example;
=IFERROR(FIND(CHAR(1);SUBSTITUTE(A1;"_";CHAR(1);LEN(A1)-LEN(SUBSTITUTE(A1;"_";"")));0)
Explained inside out;
SUBSTITUTE(A1;"_";"") => replace "_" by spaces
LEN( *above* ) => count the chars
LEN(A1)- *above* => indicates amount of chars replaced (= occurrences of "_")
SUBSTITUTE(A1;"_";CHAR(1); *above* ) => replace the Nth occurence of "_" by CHAR(1) (Nth = amount of chars replaced = the last one)
FIND(CHAR(1); *above* ) => Find the CHAR(1), being the last (replaced) occurance of "_" in our case
IFERROR( *above* ;"0") => in case no chars were found, return "0"
Hope this was helpful.
You could use this function I created to find the last instance of a string within a string.
Sure the accepted Excel formula works, but it's much too difficult to read and use. At some point you have to break out into smaller chunks so it's maintainable. My function below is readable, but that's irrelevant because you call it in a formula using named parameters. This makes using it simple.
Public Function FindLastCharOccurence(fromText As String, searchChar As String) As Integer
Dim lastOccur As Integer
lastOccur = -1
Dim i As Integer
i = 0
For i = Len(fromText) To 1 Step -1
If Mid(fromText, i, 1) = searchChar Then
lastOccur = i
Exit For
End If
Next i
FindLastCharOccurence = lastOccur
End Function
I use it like this:
=RIGHT(A2, LEN(A2) - FindLastCharOccurence(A2, "\"))
Considering a part of a Comment made by #SSilk my end goal has really been to get everything to the right of that last occurence an alternative approach with a very simple formula is to copy a column (say A) of strings and on the copy (say ColumnB) apply Find and Replace. For instance taking the example: Drive:\Folder\SubFolder\Filename.ext
This returns what remains (here Filename.ext) after the last instance of whatever character is chosen (here \) which is sometimes the objective anyway and facilitates finding the position of the last such character with a short formula such as:
=FIND(B1,A1)-1
I'm a little late to the party, but maybe this could help. The link in the question had a similar formula, but mine uses the IF() statement to get rid of errors.
If you're not afraid of Ctrl+Shift+Enter, you can do pretty well with an array formula.
String (in cell A1):
"one.two.three.four"
Formula:
{=MAX(IF(MID(A1,ROW($1:$99),1)=".",ROW($1:$99)))} use Ctrl+Shift+Enter
Result: 14
First,
ROW($1:$99)
returns an array of integers from 1 to 99: {1,2,3,4,...,98,99}.
Next,
MID(A1,ROW($1:$99),1)
returns an array of 1-length strings found in the target string, then returns blank strings after the length of the target string is reached: {"o","n","e",".",..."u","r","","",""...}
Next,
IF(MID(I16,ROW($1:$99),1)=".",ROW($1:$99))
compares each item in the array to the string "." and returns either the index of the character in the string or FALSE: {FALSE,FALSE,FALSE,4,FALSE,FALSE,FALSE,8,FALSE,FALSE,FALSE,FALSE,FALSE,14,FALSE,FALSE.....}
Last,
=MAX(IF(MID(I16,ROW($1:$99),1)=".",ROW($1:$99)))
returns the maximum value of the array: 14
Advantages of this formula is that it is short, relatively easy to understand, and doesn't require any unique characters.
Disadvantages are the required use of Ctrl+Shift+Enter and the limitation on string length. This can be worked around with a variation shown below, but that variation uses the OFFSET() function which is a volatile (read: slow) function.
Not sure what the speed of this formula is vs. others.
Variations:
=MAX((MID(A1,ROW(OFFSET($A$1,,,LEN(A1))),1)=".")*ROW(OFFSET($A$1,,,LEN(A1)))) works the same way, but you don't have to worry about the length of the string
=SMALL(IF(MID(A1,ROW($1:$99),1)=".",ROW($1:$99)),2) determines the 2nd occurrence of the match
=LARGE(IF(MID(A1,ROW($1:$99),1)=".",ROW($1:$99)),2) determines the 2nd-to-last occurrence of the match
=MAX(IF(MID(I16,ROW($1:$99),2)=".t",ROW($1:$99))) matches a 2-character string **Make sure you change the last argument of the MID() function to the number of characters in the string you wish to match!
In newer versions of Excel (2013 and up) flash fill might be a simple and quick solution see: Using Flash Fill in Excel
.
For a string in A1 and substring in B1, use:
=XMATCH(B1,MID(A1,SEQUENCE(LEN(A1)),LEN(B1)),,-1)
Working from inside out, MID(A1,SEQUENCE(LEN(A1)),LEN(B1)) splits string A1 into a dynamic array of substrings, each the length of B1. To find the position of the last occurrence of substring B1, we use XMATCH with its Search_mode argument set to -1.
A simple way to do that in VBA is:
YourText = "c:\excel\text.txt"
xString = Mid(YourText, 2 + Len(YourText) - InStr(StrReverse(YourText), "\" ))
Very late to the party, but A simple solution is using VBA to create a custom function.
Add the function to VBA in the WorkBook, Worksheet, or a VBA Module
Function LastSegment(S, C)
LastSegment = Right(S, Len(S) - InStrRev(S, C))
End Function
Then the cell formula
=lastsegment(B1,"/")
in a cell and the string to be searched in cell B1 will populate the cell with the text trailing the last "/" from cell B1.
No length limit, no obscure formulas.
Only downside I can think is the need for a macro-enabled workbook.
Any user VBA Function can be called this way to return a value to a cell formula, including as a parameter to a builtin Excel function.
If you are going to use the function heavily you'll want to check for the case when the character is not in the string, then string is blank, etc.
If you're only looking for the position of the last instance of character "~" then
=len(substitute(String,"~",""))+1
I'm sure there is version that will work with the last instance of a string but I have to get back to work.
Cell A1 = find/the/position/of/the last slash
simple way to do it is reverse the text and then find the first slash as normal. Now you can get the length of the full text minus this number.
Like so:
=LEN(A1)-FIND("/",REVERSETEXT(A1),1)+1
This returns 21, the position of the last /
Is there an efficient way to identify the last character/string match in a string using base functions? I.e. not the last character/string of the string, but the position of a character/string's last occurrence in a string. Search and find both work left-to-right so I can't think how to apply without lengthy recursive algorithm. And this solution now seems obsolete.
I think I get what you mean. Let's say for example you want the right-most \ in the following string (which is stored in cell A1):
Drive:\Folder\SubFolder\Filename.ext
To get the position of the last \, you would use this formula:
=FIND("#",SUBSTITUTE(A1,"\","#",(LEN(A1)-LEN(SUBSTITUTE(A1,"\","")))/LEN("\")))
That tells us the right-most \ is at character 24. It does this by looking for "#" and substituting the very last "\" with an "#". It determines the last one by using
(len(string)-len(substitute(string, substring, "")))\len(substring)
In this scenario, the substring is simply "\" which has a length of 1, so you could leave off the division at the end and just use:
=FIND("#",SUBSTITUTE(A1,"\","#",LEN(A1)-LEN(SUBSTITUTE(A1,"\",""))))
Now we can use that to get the folder path:
=LEFT(A1,FIND("#",SUBSTITUTE(A1,"\","#",LEN(A1)-LEN(SUBSTITUTE(A1,"\","")))))
Here's the folder path without the trailing \
=LEFT(A1,FIND("#",SUBSTITUTE(A1,"\","#",LEN(A1)-LEN(SUBSTITUTE(A1,"\",""))))-1)
And to get just the filename:
=MID(A1,FIND("#",SUBSTITUTE(A1,"\","#",LEN(A1)-LEN(SUBSTITUTE(A1,"\",""))))+1,LEN(A1))
However, here is an alternate version of getting everything to the right of the last instance of a specific character. So using our same example, this would also return the file name:
=TRIM(RIGHT(SUBSTITUTE(A1,"\",REPT(" ",LEN(A1))),LEN(A1)))
How about creating a custom function and using that in your formula? VBA has a built-in function, InStrRev, that does exactly what you're looking for.
Put this in a new module:
Function RSearch(str As String, find As String)
RSearch = InStrRev(str, find)
End Function
And your function will look like this (assuming the original string is in B1):
=LEFT(B1,RSearch(B1,"\"))
New Answer | 31-3-2022:
With even newer functions come even shorter answers. At time of writing in BETA, but probably widely available in the near future, we can use TEXTBEFORE():
=LEN(TEXTBEFORE(A2,B2,-1))+1
The trick here is that the 3rd parameter tells the function to retrieve the last occurence of the substring we give in the 2nd parameter. At time of writing this function is still case-sensitive by default which could be handeld by the optional 4th parameter.
Original Answer | 17-6-2020:
With newer versions of excel come new functions and thus new methods. Though it's replicable in older versions (yet I have not seen it before), when one has Excel O365 one can use:
=MATCH(2,1/(MID(A1,SEQUENCE(LEN(A1)),1)="Y"))
This can also be used to retrieve the last position of (overlapping) substrings:
=MATCH(2,1/(MID(A1,SEQUENCE(LEN(A1)),2)="YY"))
| Value | Pattern | Formula | Position |
|--------|---------|------------------------------------------------|----------|
| XYYZ | Y | =MATCH(2,1/(MID(A2,SEQUENCE(LEN(A2)),1)="Y")) | 3 |
| XYYYZ | YY | =MATCH(2,1/(MID(A3,SEQUENCE(LEN(A3)),2)="YY")) | 3 |
| XYYYYZ | YY | =MATCH(2,1/(MID(A4,SEQUENCE(LEN(A4)),2)="YY")) | 4 |
Whilst this both allows us to no longer use an arbitrary replacement character and it allows overlapping patterns, the "downside" is the useage of an array.
Note: You can force the same behaviour in older Excel versions through either
=MATCH(2,1/(MID(A2,ROW(A1:INDEX(A:A,LEN(A2))),1)="Y"))
Entered through CtrlShiftEnter, or using an inline INDEX to get rid of implicit intersection:
=MATCH(2,INDEX(1/(MID(A2,ROW(A1:INDEX(A:A,LEN(A2))),1)="Y"),))
tigeravatar and Jean-François Corbett suggested to use this formula to generate the string right of the last occurrence of the "\" character
=TRIM(RIGHT(SUBSTITUTE(A1,"\",REPT(" ",LEN(A1))),LEN(A1)))
If the character used as separator is space, " ", then the formula has to be changed to:
=SUBSTITUTE(RIGHT(SUBSTITUTE(A1," ",REPT("{",LEN(A1))),LEN(A1)),"{","")
No need to mention, the "{" character can be replaced with any character that would not "normally" occur in the text to process.
Just came up with this solution, no VBA needed;
Find the last occurance of "_" in my example;
=IFERROR(FIND(CHAR(1);SUBSTITUTE(A1;"_";CHAR(1);LEN(A1)-LEN(SUBSTITUTE(A1;"_";"")));0)
Explained inside out;
SUBSTITUTE(A1;"_";"") => replace "_" by spaces
LEN( *above* ) => count the chars
LEN(A1)- *above* => indicates amount of chars replaced (= occurrences of "_")
SUBSTITUTE(A1;"_";CHAR(1); *above* ) => replace the Nth occurence of "_" by CHAR(1) (Nth = amount of chars replaced = the last one)
FIND(CHAR(1); *above* ) => Find the CHAR(1), being the last (replaced) occurance of "_" in our case
IFERROR( *above* ;"0") => in case no chars were found, return "0"
Hope this was helpful.
You could use this function I created to find the last instance of a string within a string.
Sure the accepted Excel formula works, but it's much too difficult to read and use. At some point you have to break out into smaller chunks so it's maintainable. My function below is readable, but that's irrelevant because you call it in a formula using named parameters. This makes using it simple.
Public Function FindLastCharOccurence(fromText As String, searchChar As String) As Integer
Dim lastOccur As Integer
lastOccur = -1
Dim i As Integer
i = 0
For i = Len(fromText) To 1 Step -1
If Mid(fromText, i, 1) = searchChar Then
lastOccur = i
Exit For
End If
Next i
FindLastCharOccurence = lastOccur
End Function
I use it like this:
=RIGHT(A2, LEN(A2) - FindLastCharOccurence(A2, "\"))
Considering a part of a Comment made by #SSilk my end goal has really been to get everything to the right of that last occurence an alternative approach with a very simple formula is to copy a column (say A) of strings and on the copy (say ColumnB) apply Find and Replace. For instance taking the example: Drive:\Folder\SubFolder\Filename.ext
This returns what remains (here Filename.ext) after the last instance of whatever character is chosen (here \) which is sometimes the objective anyway and facilitates finding the position of the last such character with a short formula such as:
=FIND(B1,A1)-1
I'm a little late to the party, but maybe this could help. The link in the question had a similar formula, but mine uses the IF() statement to get rid of errors.
If you're not afraid of Ctrl+Shift+Enter, you can do pretty well with an array formula.
String (in cell A1):
"one.two.three.four"
Formula:
{=MAX(IF(MID(A1,ROW($1:$99),1)=".",ROW($1:$99)))} use Ctrl+Shift+Enter
Result: 14
First,
ROW($1:$99)
returns an array of integers from 1 to 99: {1,2,3,4,...,98,99}.
Next,
MID(A1,ROW($1:$99),1)
returns an array of 1-length strings found in the target string, then returns blank strings after the length of the target string is reached: {"o","n","e",".",..."u","r","","",""...}
Next,
IF(MID(I16,ROW($1:$99),1)=".",ROW($1:$99))
compares each item in the array to the string "." and returns either the index of the character in the string or FALSE: {FALSE,FALSE,FALSE,4,FALSE,FALSE,FALSE,8,FALSE,FALSE,FALSE,FALSE,FALSE,14,FALSE,FALSE.....}
Last,
=MAX(IF(MID(I16,ROW($1:$99),1)=".",ROW($1:$99)))
returns the maximum value of the array: 14
Advantages of this formula is that it is short, relatively easy to understand, and doesn't require any unique characters.
Disadvantages are the required use of Ctrl+Shift+Enter and the limitation on string length. This can be worked around with a variation shown below, but that variation uses the OFFSET() function which is a volatile (read: slow) function.
Not sure what the speed of this formula is vs. others.
Variations:
=MAX((MID(A1,ROW(OFFSET($A$1,,,LEN(A1))),1)=".")*ROW(OFFSET($A$1,,,LEN(A1)))) works the same way, but you don't have to worry about the length of the string
=SMALL(IF(MID(A1,ROW($1:$99),1)=".",ROW($1:$99)),2) determines the 2nd occurrence of the match
=LARGE(IF(MID(A1,ROW($1:$99),1)=".",ROW($1:$99)),2) determines the 2nd-to-last occurrence of the match
=MAX(IF(MID(I16,ROW($1:$99),2)=".t",ROW($1:$99))) matches a 2-character string **Make sure you change the last argument of the MID() function to the number of characters in the string you wish to match!
In newer versions of Excel (2013 and up) flash fill might be a simple and quick solution see: Using Flash Fill in Excel
.
For a string in A1 and substring in B1, use:
=XMATCH(B1,MID(A1,SEQUENCE(LEN(A1)),LEN(B1)),,-1)
Working from inside out, MID(A1,SEQUENCE(LEN(A1)),LEN(B1)) splits string A1 into a dynamic array of substrings, each the length of B1. To find the position of the last occurrence of substring B1, we use XMATCH with its Search_mode argument set to -1.
A simple way to do that in VBA is:
YourText = "c:\excel\text.txt"
xString = Mid(YourText, 2 + Len(YourText) - InStr(StrReverse(YourText), "\" ))
Very late to the party, but A simple solution is using VBA to create a custom function.
Add the function to VBA in the WorkBook, Worksheet, or a VBA Module
Function LastSegment(S, C)
LastSegment = Right(S, Len(S) - InStrRev(S, C))
End Function
Then the cell formula
=lastsegment(B1,"/")
in a cell and the string to be searched in cell B1 will populate the cell with the text trailing the last "/" from cell B1.
No length limit, no obscure formulas.
Only downside I can think is the need for a macro-enabled workbook.
Any user VBA Function can be called this way to return a value to a cell formula, including as a parameter to a builtin Excel function.
If you are going to use the function heavily you'll want to check for the case when the character is not in the string, then string is blank, etc.
If you're only looking for the position of the last instance of character "~" then
=len(substitute(String,"~",""))+1
I'm sure there is version that will work with the last instance of a string but I have to get back to work.
Cell A1 = find/the/position/of/the last slash
simple way to do it is reverse the text and then find the first slash as normal. Now you can get the length of the full text minus this number.
Like so:
=LEN(A1)-FIND("/",REVERSETEXT(A1),1)+1
This returns 21, the position of the last /
Is there a way of returning part of a string between certain characters in excel? For example my string looks like this:
`switchrefid` = {switchrefid: }
I need to cut the part of the string between the ' (apostrophes) so it just returns switchrefid
I'm sure there must be a formula for this i just cant think of the one to use.
Thanks in advance.
As long as the ``` characters occur exactly twice in your data, you can do:
=LEFT(RIGHT(A1, LEN(A1)-FIND("`", A1)), FIND("`",RIGHT(A1, LEN(A1)-FIND("`", A1)))-1)
Although it is pretty horrible!
(Edit: this assumes your data is in A1, of course.)
Just two more options, if the word always starts at the second Character and ends just before the last you could simply use :
=MID(A1,2,LEN(A1)-2) ' Minus 2 for the 2 ticks
And the second option would be to substitute the tick with nothing like so:
=SUBSTITUTE(A1,"`","")
With the substitute is also supports a number of substitutes. So if you had `switchrefid`` for some reason and only want to get rid of 2 of the three ticks you could use:
=SUBSTITUTE(A1,"`","",2)
and this would return switchrefid`
although it would not work for ''switchrefid' as it would STILL return switchrefid' because it only removes the 1st 2 instances of the text to remove