It is several years I am programming with vim and I used ctags.
I am working with a reasonably large C/C++ package and I need to find definition of functions. I usually use grep + ctags.
Recently I tried to use cscope instead of ctags and installed it with Vundle.
I see the following error for some of my files
E568: duplicate cscope database not added
I searched the web and found this:
https://blogs.oracle.com/natarajan/entry/avoiding_duplicate_cscope_database_error
It doesn't work.
How can I fix this?
Expanding on Artem's answer:
The Vim help for cscopeverbose is as follows:
If 'cscopeverbose' is not set (the default), messages will not be printed
indicating success or failure when adding a cscope database. Ideally, you
should reset this option in your .vimrc before adding any cscope databases,
and after adding them, set it. From then on, when you add more databases
within Vim, you will get a (hopefully) useful message should the database fail
to be added.
The problem here is that (a) there are multiple scripts attempting to load the cscope.out file and (b) they're not following the best practices of disabling the "verbose" cscope warnings before loading the file then re-enabling it afterwards, as suggested by the help text above.
The full error output should tell you which script is triggering this warning; for me it looked like this:
Error detected while processing /home/me_and/.vim/plugin/cscope_maps.vim:
line 42:
E568: duplicate cscope database not added
The fix was then to edit the ~/.vim/plugin/cscope_maps.vim file to add set nocscopeverbose immediately before the cs add ... lines. My version of this file already had set cscopeverbose immediately after, but if yours doesn't you should add that too.
Found the solution which worked for me (here: http://thoughtsolo.blogspot.com/2014/02/cscope-issue-duplicate-cscope-database.html):
Just add this line "set nocscopeverbose " to your ~/.vimrc file.
As per the blog, "This error pops up when VIM is already compiled with 'CSCOPE' module and you have also installed "cscopemenu.vim"". I assume that you have a vim executable with has been configured with --enable-cscope option.
Here's what I do:
Download cscope source and build it, install the executable in a directory which is available in your PATH
Download vim source code and configure it with --enable-cscope, build the source and install the executable
Download cscope_maps.vim and place it under $HOME/.vim/plugin directory. This contains cscope settings for vim.
Create cscope database out of the source and header files. You may do something like the following
find $PROJECT_HOME -name *.c -o -name "*.cpp" -o -name "*.cc" -o -name "*.h" -o -name "*.hpp" > cscope.files
cscope -qbR -i cscope.files
You can add these commands in an alias and excute the alias every time you want to update your cscope database. These two commands create finally create cscope.out database file.
Update .vimrc file to have the following
if has("cscope")
set csprg=<location to cscope executable>
set csto=0
cs add <location to cscope.out>
endif
I hope after doing these steps you should be able to use cscope with vim easily.
Note that if you are working on multiple projects, you should be able to add appropriate environment variables to enable vim to pick the correct cscope database.
To answer your second question, may I suggest using tagbar. This will list your function names in the current source or header file. You can install it using Vundle. Add the following line to your .vimrc
Plugin 'majutsushi/tagbar'
Add this to your .vimrc to toggle tagbar view
nmap <F4> :TagbarToggle<CR>
Note that F4 is just an example and you may use any binding to do the same.
Related
I was looking to get into learning a text editor for programming. However, I've quickly run into a little snag that I can't seem to find a solution to.
I have modified my /home/user/.nvimrc file to add some plugins and I can load it using :source ~/.nvimrc, however, it never loads automatically. :scriptnames shows a list of scripts in /usr/, but mysteriously absent from the list is the .nvimrc file in my home directory. Again, I can load it in the command line, but I'd like to not have to use :so ~/.nvimrc every time I open a file.
I am not using sudo to run vim.
How can I solve this problem? Is this something everybody has to do?
Could be this issue: https://github.com/neovim/neovim/issues/3530
Summary:
New location is ~/.config/nvim/init.vim
To keep ~/.nvimrc you can source it from the new location:
mkdir -p ~/.config/nvim
echo 'source ~/.nvimrc' > ~/.config/nvim/init.vim
Instead of referring to your rc file directly, consider using $MYVIMRC:
:e $MYVIMRC
:source $MYVIMRC
Reference: Learn Vim the Hard Way/Editing your vimrc
:help config lists the paths for each OS:
Unix ~/.config/nvim/init.vim (or init.lua)
Windows ~/AppData/Local/nvim/init.vim (or init.lua)
$XDG_CONFIG_HOME $XDG_CONFIG_HOME/nvim/init.vim (or init.lua)
I am using cscope on a project which locates in author/trunk/ .
Under "author" directory cscope -R worked well and generated cscope.out. However when using same commmand on a subdirectory like author/trunk/../dhcp, no cscope .out was generated ,and had "no cscope connection" when I wanted to search in one file
So what should I do now ,THanks
First, I recommend using cscope -bkqR instead of the simpler cscope -R.
Second, I think you need to start cscope in the same directory where cscope.out is located or you'll get the error you mentioned. At least, this is true for vim.
Good day,
I typically work on relatively small (less than 20,000 lines of code) projects that are all self contained within a single directory, have their own Makefile, and are fairly easy to work with.
VIM is my preferred editor, and when I open a project, I typically build the ctags list via a mapping to the F10 key:
map <F10> :!ctags -R --c++-kinds=+p --fields=+iaS --extra=+q .<CR>
This allows me to jump to the definition of a variable/struct/etc via moving the cursor over the text, and hitting CTRL+], as well as using code completion with a drop-down list via OmniCppComplete.
However, I am now working on a slightly larger project which makes use of LOTS of structures. Furthermore, many of these structures have arrays of other custom structures as members, so code completion is a very useful and important tool for me right now.
I have two paths that include a lot of .C files and .h files, and they may change from machine to machine. On each machine, however, we have an environment variable in our .bashrc file that points to them like so:
SDK_SRC_PLUS_HEADERS=/public/sdk
THIRD_PARTY_SDK=/private/sdk
I would like to be able to have VIM automatically refer to the contents of these additional paths when I attempt to do code completion (via VIM's built-in OmniCppComplete feature), or to jump to the files in these locations when I use CTRL+] in VIM to jump to the definition of a struct, function, variable, etc.
So, for both of the above paths, I cd into them, and generate the tags via ctags -R. Then, I modified my ~/.vimrc file to include additional tags paths, like so:
tags=./tags
tags+=$SDK_SRC_PLUS_HEADERS/tags
tags+=$THIRD_PARTY_SDK/tags
I then cd into my project at /home/user1/projects/test, start VIM, and hit F10 in VIM to index it. However, this does not work at all. In fact, it breaks my ability to even use tags just for the project itself (ie: CTRL+] now does nothing).
Does anyone have any suggestions on how I could have code completion source tags and jump-to-definitions using multiple source directories via environment variables?
Thank you all in advance for your time and assistance!
I wanted to add to the solution provided by #sehe.
This is the final set of changes I made to my .vimrc. The first lines are for adding expanded environment variable paths to my tags variable. The other is for auto-updating tags in the event that I have to update my SDK and don't want to be able to accidentally use out-of-date tags:
" CTAGS tag generation for OmniCppComplete
set tags+=./tags
exec expand("set tags+=$SDK_SRC_PLUS_HEADERS/tags")
exec expand("set tags+=$THIRD_PARTY_SDK/tags")
" Can verify taglist is correct via ":set verbose tags?" command
" Create a mapping to delete the old tags, re-generate them, and use them
map <F10> :!ctags -R --c++-kinds=+p --fields=+iaS --extra=+q . \| rm -f $SDK_SRC_PLUS_HEADERS/tags \| ctags -R -f $SDK_SRC_PLUS_HEADERS/tags $SDK_SRC_PLUS_HEADERS/tags \| rm -f $THIRD_PARTY_SDK/tags \| ctags -R -f $THIRD_PARTY_SDK/tags $THIRD_PARTY_SDK/tags \| echo "Done re-generating tags."<CR>
It indeed appears to be the problem that you can't use environment variables inside the tags setting.
I came up with this as a workaround:
:let &tags.=expand(",$SDK_SRC_PLUS_HEADERS/tags")
This might be slightly more friendly:
:exec expand("set tags+=$SDK_SRC_PLUS_HEADERS/tags")
I want to use Ctags for a Zend framework project. I executed this command : ctags -R ./* ../ZendFramework/*to create a list of tags, but the problem is when I press Ctrl-] on a class or method I get this error: ctags: tag not found
I checked the tags file and all classes/methods/variables are listed. The tags files is located in the root of the project. Should I load it manullay when I open a file?
Yes, you should tell Vim where to find your tags file with something like:
:set tags=/path/to/tags
This is not very optimal, though. This line in your ~/.vimrc should help:
set tags=./tags,tags;$HOME
It tells Vim to look for a tags file in the directory of the current file, in the current directory and up and up until your $HOME (that's the meaning of the semicolon), stopping on the first hit.
The 'tags' variable must point to your tags file. See :help 'tags'.
An example to add the path to your tags file:
:set tags+=$HOME/yourpath/tags
I Faced the same problem few days ago. I was applying ctags shortcuts in a .c file and I was getting this error while doing so. I googled the error and found that the ctags was not installed. But the ctags is present in my server. I tried moving the ctag folder to the trunk which i'm currently working and this trick resolved my problem.
steps:
go to your home folder and enter "where is ctags"
it will display the path of the ctags file.
copy that file and move the same to the directory which you are working in
i hope this will resolve your issue.
I'm new to vim and wanted to get ctags integration working so I can more easily navigate a large java project.
I've pulled down the zip from source forge and extracted it but from here I'm not sure how to get it working with vim
Any help for a novice vim user would be great!
As nobody has given one critical function in these answers, I'll provide one more slightly superior answer.
The easiest way to use ctags with vim is by calling:
ctags -R *
from the root of your source repository. This will generate a tags file in that same directory.
In your ~/.vimrc file, add this short block:
" ctags optimization
set autochdir
set tags=tags;
" denotes a comment. set autochdir tells vim that if it doesn't find a tags file in the $PWD it will look in the directory parent for the tags file, recursively. set tags=tags; tells vim that the name of your tags file will always be the same as the default tags file generated by ctags.
So long as you run ctags -R * in your root source directory the first time and occasionally to update it (if you pull new changes from others) then you'll always have a fast and intuitive ctags symbol lookup in vim.
Using exuberant ctags, I use something like this in my project's base directory (excluding the "log" directory):
ctags -R --exclude=log *
You have to run the ctags command with the source files as arguments. This will create a tags file containing all information. Then you can open a file with vim, and e.g. press Ctrl-] when on a line with a function to jump to the code of that function. If vi isn't started in the same directory as the tag file, you can set it with :set tags=<file>
This is what I'm doing:
ctags -n -f [OUTPUT] [SOURCE] to generate the tags (NOTE: the -n applies to me but may not be necessary for your usage)
exec "set tags=" . [OUTPUT] inside of .vimrc to let vim become of aware of the tags
EDIT: I'm using
Exuberant Ctags 5.5.2
VIM 6.1
Additional info:
See ctags usages here
Tips and tricks from SO
look at this article: vim-easytags. i haven't tried this, but it looks quite good. manually creating and updating tags was really annoying. hope this will help. :)