I have a field on one of my base page types which I need to update programmatically from an external data feed, so that it can be included in my Smart Search index.
The documents are versioned, but I want to update the published value of this field regardless of checkout state, and obviously avoid any sort of overwrite when documents are checked in.
The field will not appear on the editor form -- or ideally, would conditionally display for Global Admins.
It appears that using the API to update the document without doing a CheckOut fails silently. However if I do a Checkout/Update/CheckIn on a checkout-out page, the author will lose their work I assume?
Any way to handle this "versionless" field via the Kentico data model and API?
I don't think there is a way around updating checked out pages. You can update the page type table directly, but as you mentioned, it will be overwritten when they check in. You could update the version history I believe to make changes to the current data that is checked out, but again, I think that will be lost if the user cancels.
The only way I can think of to solve your issue is to create another table that maps the values you want to the page. Then you don't have to worry about the pages being checked out, you just need to grab the documentID or something. Since the value isn't displayed to the editor, you just have a field that does a lookup on this table.
The preferred and right way is using the API but as you stated, it causes problems if a user has something already checked out and working on it or it's in workflow and not published yet.
If the field you're updating is page type specific, there is one thing specifically I can think of and that's going directly to the database to the page type's database field and perform an update to that field.
Note: this is not recommended unless you know specifically what you're doing and have done full testing on it
The down side of going direct to the database is this will not update the current version since you're using check in/out and workflow. You will also need to update the checked out and current version which means you need to:
Go to the Document itself in the cms_documents table and get the document you are working with.
Then using the fields DocumentCheckedOutVersionHistoryID and DocumentPublishedVersionHistoryID' you can get the version history IDs of the document from theCMS_VersionHistory` table.
Then you can perform an update to the CMS_VersionHistory and your custom page type fields.
You will then need to look in the CMS_WorkflowHistory table and find out if that document is in workflow and in what step.
After you have that workflow history step, use the VersionHistoryID field to go back to the CMS_VersionHistory table and update that record with your data.
Again, not an elegant solution since you are using check in/out and workflow but after some trial and error and testing you should be able to figure it out.
UPDATE
You may also be able to add a custom table or some other linked database table which will allow you to create a global handler. The linked table would be where you perform your updates via API and other calls without versioning or workflow. Then when a user updates a specific page type you could do a check to see when the last time that linked table was updated and update the field(s) you need on update of that particular page (of course by node and document IDs).
Unfortunately you'll have to check it in and out with API. See examples here.
Also you might need to publish it in order to reflect changes on the live site.
Related
I want to trigger a NetSuite workflow when the user sets the value of a field, but I don't want to have them submit first. The Workflow state builder looks like it has useful options but I can't get it to work.
There's some useful looking blog posts around but a lot of them seem out of date.
Update - more info
My primary issue is this one: Restrict what customers an employee can see (NetSuite)
The hack I'm currently looking at is populating a custom Transaction Column Field that I've added to a custom Time Recording form. The idea is to load this field on the UI with only valid projects (not customers as well), and this I have been able to do.
The problem is I still (as far as I can tell) still need to populate the "Customer" field, which is mandatory; I'm also assuming that if I don't do that then any time that is recorded won't go against the project. I had thought that if the user selects the project they want then I can populate the customer field with that value. I hate this as an approach but I can't see how else to do it. I do have coding experience (including JavaScript) but haven't made the leap into SuiteScript yet.
You won't be able to do this in a Workflow, as they are currently limited to only work with body level fields and cannot modify Transaction Column Fields (aka sublists).
You should be able to achieve this with a Client Side Script though.
Source (Netsuite login required).
Sublist changes will be available for transactions in the 2018.1 release sometime in Feb/Mar.
I have scripts that react off of, for example, a client Recalc client event. For example, on my form I have a subtab that users may add or remove items from. Based on actions on this subtab (housing a child record of the parent) I would like a field on the parent to update (say to show a total from the children records).
As I was saying, these events seem to work fine if in edit mode but they do not work correctly in view mode. (even in view mode these child records have a "Delete" option at the end of each row in the subtab. This was provided by netsuite by default.
I wondered if anyone had any tips to best allow this parent field to update real time while in updating the subtab rows with the form in view mode.
Thanks.
You can make a custom field on the parent (header) whose value is determined by saved search. For instance, make a saved search that totals the line values by transaction. Be sure to make it filter by transaction in the Available Filters tab. Make the search public so everyone can use it.
Create the custom field that sources the total from the saved search. Make sure to uncheck the "Store Value" checkbox, as you don't want to store the data, you want to reference the search results. You do this on the Validation and Defaulting tab. You'll see a field for Saved Search there. Choose the search you created above.
As you remove/add/change lines on the transaction, the field updates accordingly. In essence, you don't need a single line of code to make this work - it's all in how you create the search and the custom field that references it.
I have a similar situation posted here.
The NetSuite team answered me by email, and it happens you can't really achieve this on the view mode: some API methods are not available. Their suggestion to my case (and I think it applies to yours too) was really to force a refresh on the whole page.
Of course, you can always achieve this accessing the DOM elements directly, but this isn't a best practice, as your code can stop working if these elements change on a version update.
I had the same problem, I'm not able to restrict on view or remove edit button. But, there was one alternative solution with workflows, you can deploy workflow on child record edit mode restrictions, then if the user clicks edit on view then the record will not be available to edit. This concern will apply to custom record as well.
Is it possible to add a custom field to modx_site_content? What I'm trying to accomplish, is to add a field t_id. I've already added this in the database. However, when I save it using: $object->save(); nothing is saved for that field, it just comes up as Null.
The version I'm using is: MODX Revolution 2.2.4-pl (June 14, 2012)
Actually - I've answered that question before. You want to create a separate table and schema.
modx evolution external database
however - it looks like you want to add a field so that you can call it as part of the page/template in modx? You may have to write a plugin to extract that data at the same time as the resource.
I know this is an old topic, but now the ClassExtender extra will create the additional table for you based on your schema, add the additional fields to the Create/Edit Resource panel with a plugin, and save those field values to the table in the DB when the Resource is saved in the Manager. This can save a lot of time and trouble.
If you can wait, a new version that works in MODX 3 should be released soon.
I am new to Drupal and trying to get hand on it.
I am not able to find how to have the following functionality on my site. If anyone can help me out, it would be great for me.
I need to have a form that will take 2 fields one of which is supposed to be the login id(how to retrive login id?). I need to store this and display in tabular form also on a new page. Lastly I want to provide an edit form for this functionality using the same form but its use will be like whenever a person adds value in this form, it checks in Table1, if entry is not present it adds in table, else it updates the table.
Apart from this I need to store all the updations in a seperate table or something like that, so that I am able to see the history of all the changes
Eg:
ADD Form:
Fields:
- LoginID
- Phone number
Show Table Page(Tabular with the stored information)
Edit Form(same as above form):
Fields:
- LoginID
- Phone number
Now If I add my phone number to this it will get stored. Later when I try to modify my number it should update in initial table but also store the history of old and new entry in a separate table so that I can perform varies options on it.
I also dont know how to add/enable form fields in drupal. :(
Thanks
I'm not entirely sure what you're asking, but I think the Computed Field module might be helpful. The module allows you to define custom hooks that run when a node is saved.
If you're not creating nodes and are using something like the Webform module, you should be able to write a module to process the data.
I have an NSTableView which is populated via a CoreData-backed NSArrayController. Users are able to edit any field they choose within the NSTableView. When they select the rows that they have modified and press a button, the data is sent to a third-party webservice. Provided the webservice accepts the updated values, I want to commit those values to my persistent store. If, however, the webservice returns an error (or simply fails to return), I want the edited fields to revert to their original values.
To complicate matters, I have a number of other editable controls, backed by CoreData, which do not need to resort to this behaviour.
I believe the solution to this problem revolves around the creation of a secondary Managed Object context, which I would use only for values edited within that particular NSTableView. But I'm confused as to how the two MOC would interact with each other.
What's the best solution to this problem?
The easiest solution would be to implement Core Data's undo functionality. That way you make the changes to Core Data but if the server returns the error, you just rollback the changes. See the Core Data docs for details.