I'm trying to start a Docker with an Ubuntu image and the installing zmq from npm.
It seems that when it executes the npm install it uses the kernel from my computer (Arch Linux 4.8.13) to compile the packages.
How could I force to use the image Ubuntu in the docker to compile the packages of the npm?
I let you here a screenshot with the result of the build and the Dockerfile
This is the content of /var/www/forum/npm-debug.log
> zmq#2.15.3 install /var/www/forum/node_modules/zmq
> node-gyp rebuild
/bin/sh: 1: node: not found
gyp: Call to 'node -e "require('nan')"' returned exit status 127 while in binding.gyp. while trying to load binding.gyp
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack at ChildProcess.onCpExit (/usr/share/node-gyp/lib/configure.js:354:16)
gyp ERR! stack at emitTwo (events.js:87:13)
gyp ERR! stack at ChildProcess.emit (events.js:172:7)
gyp ERR! stack at Process.ChildProcess._handle.onexit(internal/child_process.js:200:12)
gyp ERR! System Linux 4.8.13-1-ARCH
gyp ERR! command "/usr/bin/nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /var/www/forum/node_modules/zmq
gyp ERR! node -v v4.2.6
gyp ERR! node-gyp -v v3.0.3
gyp ERR! not ok
npm WARN forum-sad#0.0.1 No repository field.
npm WARN forum-sad#0.0.1 No license field.
npm ERR! Linux 4.8.13-1-ARCH
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install"
npm ERR! node v4.2.6
npm ERR! npm v3.5.2
npm ERR! code ELIFECYCLE
npm ERR! zmq#2.15.3 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the zmq#2.15.3 install script 'node-gyp rebuild'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the zmq package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get information on how to open an issue for this project with:
npm ERR! npm bugs zmq
npm ERR! Or if that isn't available, you can get their info via:
npm ERR! npm owner ls zmq
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! /var/www/forum/npm-debug.log
Related
I was trying to get the lzf module for my project, then an error occurred during the installation. Just as other people would have done I googled about the question, but couldn't find the right solution for my situation.
lzf#0.3.0 install /home/grewvr/node_modules/lzf
node-gyp rebuild
/bin/sh: 1: node: not found
gyp: Call to 'node -e "require('nan')"' returned exit status 127 while in binding.gyp. while trying to load binding.gyp
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack at ChildProcess.onCpExit (/usr/share/node- gyp/lib/configure.js:354:16)
gyp ERR! stack at emitTwo (events.js:87:13)
gyp ERR! stack at ChildProcess.emit (events.js:172:7)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:200:12)
gyp ERR! System Linux 4.4.0-45-generic
gyp ERR! command "/usr/bin/nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /home/grewvr/node_modules/lzf
gyp ERR! node -v v4.2.6
gyp ERR! node-gyp -v v3.0.3
gyp ERR! not ok
npm WARN moskit#1.0.0 No repository field.
npm ERR! Linux 4.4.0-45-generic
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install" "--save" "lzf"
npm ERR! node v4.2.6
npm ERR! npm v3.5.2
npm ERR! code ELIFECYCLE
npm ERR! lzf#0.3.0 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the lzf#0.3.0 install script 'node-gyp rebuild'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the lzf package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get information on how to open an issue for this project with:
npm ERR! npm bugs lzf
npm ERR! Or if that isn't available, you can get their info via:
npm ERR! npm owner ls lzf
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! /home/grewvr/npm-debug.log
Been trying to fix the problem for two days, please help me.
I'm trying to reprogram a dash button to send an SMS to a phone. The task I am trying to attempt is located here: https://github.com/sanzgiri/dash-sms. Below is a copy of the error message I've been getting. Any insight is much appreciated. I'm using Ubuntu version 16 in a virtual machine.
rebecca#rebecca-VirtualBox:~$ sudo npm install node-dash-button
> socketwatcher#0.3.0 install /home/rebecca/node_modules/socketwatcher
> node-gyp rebuild
/bin/sh: 1: node: not found
gyp: Call to 'node -e "require('nan')"' returned exit status 127 while in binding.gyp. while trying to load binding.gyp
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack at ChildProcess.onCpExit (/usr/share/node- gyp/lib/configure.js:354:16)
gyp ERR! stack at emitTwo (events.js:87:13)
gyp ERR! stack at ChildProcess.emit (events.js:172:7)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:200:12)
gyp ERR! System Linux 4.4.0-21-generic
gyp ERR! command "/usr/bin/nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /home/rebecca/node_modules/socketwatcher
gyp ERR! node -v v4.2.6
gyp ERR! node-gyp -v v3.0.3
gyp ERR! not ok
npm ERR! Linux 4.4.0-21-generic
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install" "node-dash-button"
npm ERR! node v4.2.6
npm ERR! npm v3.5.2
npm ERR! code ELIFECYCLE
npm ERR! socketwatcher#0.3.0 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the socketwatcher#0.3.0 install script 'node-gyp rebuild'.
npm ERR! Make sure you have the latest version of node.js and npm installed.
npm ERR! If you do, this is most likely a problem with the socketwatcher package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get information on how to open an issue for this project with:
npm ERR! npm bugs socketwatcher
npm ERR! Or if that isn't available, you can get their info via:
npm ERR! npm owner ls socketwatcher
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! /home/rebecca/npm-debug.log
I believe the code is confugure to work with "node" instead of "nodejs".
You can setup a simlink or just run this command. It solved the issue for me.
sudo apt install nodejs-legacy
Had the same issue and nothing would work. Finally had to go to node 0.10.26 on the pi.
Used NVM instead of direct node install.
curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.32.1/install.sh | bash
nvm install 0.10.26
When I try to install ember-cli via npm, following the official documentation, I get this error:
9 errors generated.
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Error 1
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit(/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:270:23)
gyp ERR! stack at emitTwo (events.js:87:13)
gyp ERR! stack at ChildProcess.emit (events.js:172:7)
gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:200:12)
gyp ERR! System Darwin 14.5.0
gyp ERR! command "/usr/local/bin/node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /usr/local/lib/node_modules/ember-cli/node_modules/bufferutil
gyp ERR! node -v v4.0.0
gyp ERR! node-gyp -v v3.0.3
gyp ERR! not ok
npm ERR! Darwin 14.5.0
npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install" "-g" "ember-cli"
npm ERR! node v4.0.0
npm ERR! npm v3.3.5
npm ERR! code ELIFECYCLE
npm ERR! bufferutil#1.1.0 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the bufferutil#1.1.0 install script 'node-gyp rebuild'.
npm ERR! This is most likely a problem with the bufferutil package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get their info via:
npm ERR! npm owner ls bufferutil
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! /Users/sandropalmieri/npm-debug.log
I 've tried several times running the command using sudo but still getting this kind of error. Any idea of what's going on? Can you please assist? Thanks
Try adding --no-optional to your npm install command.
Are you using npm 3.3.3? See issue here: https://github.com/ember-cli/ember-cli/issues/4873
install node
node -v
v12.14.1
which npm
/usr/local/bin/npm
npm -v
6.13.4
npm install --save core-js#^3
sudo npm install -g ember-cli
which ember
/usr/local/bin/ember
ember -v
ember-cli: 3.16.0
node: 12.16.1
os: darwin x64
I am trying to use waterlock for authentication. i have installed waterlock but failing to install waterkick-local-auth. the error message is shown bellow:
gyp ERR! build error
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/local/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:110:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:1067:12)
gyp ERR! System Linux 3.13.0-34-generic
gyp ERR! command "node" "/usr/local/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
gyp ERR! cwd /home/developer/Desktop/Sails/AuthTest/node_modules/waterlock-local-auth/node_modules/bcrypt
gyp ERR! node -v v0.12.1
gyp ERR! node-gyp -v v1.0.2
gyp ERR! not ok
npm ERR! Linux 3.13.0-34-generic
npm ERR! argv "/usr/local/bin/node" "/usr/local/bin/npm" "install" "waterlock-local-auth"
npm ERR! node v0.12.1
npm ERR! npm v2.5.1
npm ERR! code ELIFECYCLE
npm ERR! bcrypt#0.7.8 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the bcrypt#0.7.8 install script 'node-gyp rebuild'.
npm ERR! This is most likely a problem with the bcrypt package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get their info via:
npm ERR! npm owner ls bcrypt
npm ERR! There is likely additional logging output above.
npm ERR! Please include the following file with any support request:
npm ERR! /home/developer/Desktop/Sails/AuthTest/npm-debug.log
By studying the documentation of the waterlock local auth i have come to an solution is that the problem is caused for the dependencies of waterlock local auth.
I am using the latest node version.
And to make this work i need to downgrade the node version. And then all the dependencies will work.
I am trying to install a printer module for node on a lubuntu system, but making the npm installation, I get this:
gyp: Call to 'cups-config --libs' returned exit status 127. while trying to load binding.gyp
gyp ERR! configure error
gyp ERR! stack Error: `gyp` failed with exit code: 1
gyp ERR! stack at ChildProcess.onCpExit (/usr/share/node-gyp/lib/configure.js:344:16)
gyp ERR! stack at ChildProcess.EventEmitter.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:797:12)
gyp ERR! System Linux 3.16.0-23-generic
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /home/puesto1/app/node_modules/printer
gyp ERR! node -v v0.10.25
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian
npm ERR! printer#0.1.1 install: `node-gyp rebuild`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the printer#0.1.1 install script.
npm ERR! This is most likely a problem with the printer package,
npm ERR! not with npm itself.
npm ERR! Tell the author that this fails on your system:
npm ERR! node-gyp rebuild
npm ERR! You can get their info via:
npm ERR! npm owner ls printer
npm ERR! There is likely additional logging output above.
npm ERR! System Linux 3.16.0-23-generic
npm ERR! command "/usr/bin/nodejs" "/usr/bin/npm" "install"
npm ERR! cwd /home/puesto1/app
npm ERR! node -v v0.10.25
npm ERR! npm -v 1.4.21
npm ERR! code ELIFECYCLE
npm ERR!
npm ERR! Additional logging details can be found in:
npm ERR! /home/puesto1/app/npm-debug.log
npm ERR! not ok code 0
It is a recently installed lubuntu, and I don´t know what to do. Any suggestion to solve the problem?? Any other module to print??
Thank you.
I think node-gyp is not up to date in your system and also cups-config is not installed, try to re-install node-gyp using apt-get with this command : sudo apt-get install node-gyp and install cups-config using command : sudo apt-get install libcups2-dev