In my nodejs project (written in Typescript) I can run my tests with this command:
mocha --compilers ts:ts-node/register,tsx:ts-node/register
and they succeed. I also used this command in my package.json file so that
npm test
runs them the same way, however in this case I get:
Mikes-iMac:antlr4-graps mike$ npm test
> mocha --compilers ts:ts-node/register,tsx:ts-node/register
module.js:472
throw err;
^
Error: Cannot find module 'ts-node/register'
at Function.Module._resolveFilename (module.js:470:15)
My package.json file contains:
"scripts": {
"test": "mocha --compilers ts:ts-node/register,tsx:ts-node/register"
},
"devDependencies": {
"#types/chai": "^3.4.34",
"#types/mocha": "^2.2.32",
"#types/node": "^6.0.40",
"chai": "^3.5.0",
"mocha": "^2.5.3",
"typescript": "^2.0.3",
"vscode": "^1.0.0"
},
What is the correct variant to run mocha via npm?
The problem is that no matter what, but npm run <script> in general and npm test in particular will run command using /bin/sh, not your current shell, which is likely different.
Since you don't have ts-node in your dependencies, I assume it's installed globally. Depending on how you install Node.js, /bin/sh may end up using different Node.js installation than your current shell and therefore not have same globally installed package.
If I'm right these two commands will give different results:
$ which node
$ /bin/sh -c 'which node'
Two possible solutions:
Add ts-node to devDependencies of you project and npm install.
Ensure, that /bin/sh uses same installation of Node.js, as you current shell.
Related
I'm working on chat application , I'm using express , socket.io, moment and nodemon.
If I run nodemon server.js it works, but if I want to run my script as follow npm run dev
and this is inside my package.json:
"dependencies": {
"express": "^4.17.3",
"moment": "^2.29.1",
"nodemon": "^2.0.15",
"socket.io": "^4.4.1"
}
"scripts": {
"dev" : "nodemon server.js"
}
I'm getting this error:
'...\ChatApp-Rooms\node_modules\.bin\' is not recognized as an internal or external command,
operable program or batch file.
node:internal/modules/cjs/loader:936
throw err;
^
Error: Cannot find module 'C:\Users\Sam Taklimi\Desktop\nodemon\bin\nodemon.js'
for some reason the path of my nodemon is not correct.
Following stack overflow, in PowerShell I changed
ExecutionPolicy to
Unrestricted
still doesn't work.
You need to install nodemon as dependency of your project like that
npm i nodemon
When you run nodemon from your terminal you run a package that is probably installed globally. When you run it as part of your npm scripts you need to run it from the installed dependencies of your project
Your server.js has to be in the same path/dir/level with your package.json file
I have a test file like so: (I am using create-react-app)
import React from 'react';
import ReactDOM from 'react-dom';
import App from './components/Calculator';
import { getAction, getResult } from './actions/'
import {shallow} from 'enzyme';
import toJson from 'enzyme-to-json';
import Enzyme from 'enzyme';
import Adapter from 'enzyme-adapter-react-16';
Enzyme.configure({ adapter: new Adapter() });
it('renders without crashing', () => {
const wrapper = shallow(<App />)
expect(toJson(wrapper)).toMatchSnapshot();
});
it('displays the choosen operator', () => {
const action = {
type: 'GET_ACTION',
operator: '+'
};
expect(getAction("+")).toEqual(action)
})
it('displays the typed digit', () => {
const action = {
type: 'GET_RESULT',
n: 3
};
expect(getResult(3)).toEqual(action);
})
it('checks that the clickevent for getNumber is called',() => {
const clickEvent = jest.fn();
const p = shallow(<p data-n="1" onClick={clickEvent}>1</p>)
p.simulate('click')
expect(clickEvent).toBeCalled();
})
and a package.json:
{
"name": "my-app",
"version": "0.1.0",
"private": true,
"dependencies": {
"react": "^16.2.0",
"react-dom": "^16.2.0",
"react-scripts": "1.1.1"
},
"scripts": {
"start": "react-scripts start",
"build": "react-scripts build",
// "test": "react-scripts test --env=jsdom",
"test": "jest",
"eject": "react-scripts eject"
},
"devDependencies": {
"enzyme": "^3.3.0",
"enzyme-adapter-react-16": "^1.1.1",
"enzyme-to-json": "^3.3.3",
"jest": "^22.4.3"
}
}
when I run jest --updateSnapshot I get:
command not found: jest
but jest is installed.
Jest is installed, but is likely in your ./node_modules/.bin directory. You can append that to your command ./node_modules/.bin/jest --updateSnapshot. Since you already have jest as a scripts command in your package.json you can also run it with npm test -- --updateSnapshot. npm automatically adds ./node_modules/.bin to your path.
update: Newer versions of yarn will resolve node module bin scripts, so you can also just run yarn jest {cmd} and it should work.
I ran into similar issue. I fixed it by installing jest globally.
npm install -g jest
You need to run it this way :
./node_modules/.bin/jest
or run npm test
Install the Jest command-line interface (Jest CLI):
npm install --save-dev jest-cli
Then run the jest command. Working for me in a linux instance by docker on Windows 10.
I was getting zsh: command not found: jest after installing jest and trying to use the command jest. The solution that worked for me was running npx jest
A way to solve the error is to use the "npx" command.
npx jest --version
npx jest --init
In my case, npm didn't install the jest command for some reason.
To fix this:
I deleted the node_modules/jest directory
Re-ran npm install and got the jest command installed.
try using the command
npx jest <folder>
I ran into the same problem. I tried multiple solutions and this worked.
I also have jest CLI installed
you can install it by using this command in your shell
npm install --save-dev jest-cli
just use command
npm test or npm t
Removing node_modules and running npm install again fixed this for me
Also the "new" npm ci command can fix this as it deletes (or clears) node modules and performs a clean install each time, plus it's faster compared to manually deleting node_modules and re-installing
My situation was caused by my git pipeline. I wasn't caching node_modules nor was I caching untracked files.
Ultimately I added
cache:
# untracked: true
key:
files:
- package-lock.json
paths:
- node_modules
to my pipeline .yml and violá
Note
you can either use path OR untracked, find out more about each to see what works best for you
Just reload your bash config file after install jest:
source ~/.bashrc # on linux ?
source ~/.bash_profile # on macOs
Jest will be not recognized but executed with npx jest automatically
I use yarn. Adding jest and jest-cli to node_modules did not make any difference with my attempts to run tests like jest mytest.test.js. In addition to mentioned steps, the following helped to get it running:
yarn jest mytest.test.js
you can run ln -s ./node_modules/.bin/jest jest
and then run jest --init it will work. Or you can install jest cli with npm install --save-dev jest-cli and then run jest --init it will also work.
In my case, I was trying to install jest with yarn on a pipeline to run tests and since I had jest installed as a devDependency it wasn't installing on yarn install.
I found this bug on GitHub https://github.com/yarnpkg/yarn/issues/2739 that it seems that Yarn will not install devDependencies when NODE_ENV=production.
I just needed to change the NODE_ENV and after that, it was working, otherwise, run it like this:
yarn install --production=false
Faced the same issue. But it was due to the wrong node version. If you use the latest jest v29, you need Node version 14 or higher.
You can run the test using npx jest [parameters]. npx is the package runner. It will help you execute a locally installed package.
Had the same issue and was able to solve it by running npm install
Alternatively, just add jest module to package.json dependencies.
{
"dependencies": {
...
"jest": "^29.3.1",
...
}
}
I'm looking for a pattern to avoid the need of global packages when working with node, I'd like to install everything I need with npm install and then just running every command with npm run xxx, without any global package installed.
For example, I have jest configured to run my tests.
These are the dependencies in my package.json:
[...]
},
"author": "",
"license": "ISC",
"dependencies": {
"#types/express": "^4.16.1",
"#types/node": "^11.10.5",
"express": "^4.16.4",
"ts-node-dev": "^1.0.0-pre.32",
"typescript": "^3.3.3333"
},
"devDependencies": {
"#types/jest": "^24.0.9",
"#types/supertest": "^2.0.7",
"jest": "^24.3.1",
"nodemon": "^1.18.10",
"supertest": "^4.0.0",
"ts-jest": "^24.0.0"
}
[...]
and these are some scripts I have configured:
[...]
"scripts": {
"test": "jest --coverage",
"tsc": "tsc",
"watch": "nodemon --watch 'src/**/*.ts' --exec 'ts-node' src/server.ts"
},
[...]
But when I issue npm run test I get this error:
$ npm run test
> ci-test#0.0.1 test /home/sas/devel/apps/vue/ci-test
> jest --coverage
sh: 1: jest: not found
npm ERR! file sh
[...]
If I install jest globally with npm install -g jest everything runs fine, but that's precisely what I'm trying to avoid.
A few assumptions I made that might be wrong:
when running scripts node first looks for commands in node_modules/.bin (in order to use locally installed packages)
when I issue npm install every command line command is installed to node_modules/.bin
This last one is not working, because even though I have jest in my devDependencies there's no node_modules/.bin/jest file in my project
$ ls node_modules/.bin/
acorn cdl esgenerate esvalidate is-ci json5 loose-envify mime nodetouch parser semver sshpk-sign strip-indent watch
atob escodegen esparse import-local-fixture jsesc js-yaml marked mkdirp nopt rc sshpk-conv sshpk-verify uglifyjs
On the other hand, as a workaround, the following seems to work:
"scripts": {
"test": "npx jest --coverage",
But it takes more than 10 seconds for npx to install jest everytime I run npm run test
So, what would be the correct way to achieve it? O how can I tell npm to install jest to node_modules/.bin and use it whe I reference it in my scripts?
It seems like it was easier than expected, I just had to issue:
npm install --only=dev
seems like by default npm won't install dev dependencies
I did a couple more tests, playing with the NODE_ENV var, and after unsetting it npm install seems to install also devDependencies, along with jest in node_modules/.bin/jest. It seems like somehow it was assuming I was in production mode.
Another trick I learned to avoid installing global dependencies is to install it with --save-dev, and then adding a script to run it with npm run. For example, to avoid installing jest globally but still be able to use it from the command line you should:
npm install jest --save-dev
Then add the following to your package.json
scripts: {
"jest": "jest"
}
And then you can run it from the command line with npm run jest. To pass params from the command line you have to add a '--' before the params, like this: npm run jest -- --coverage. Or you could just issue npx jest --coverage, if installed, npx will use jest from node_modules/.bin. (check this for more info)
BTW, this answer to a similar question might be useful
I'm currently trying to implement this tutorial:
https://www.typescriptlang.org/docs/handbook/react-&-webpack.html
I'm supposed to install react and react-dom and also webpack + typescript + awesome-typescript-loader + source-map-loader, and that's what I did. I also installed webpack-cli accordingly to instructions that I got from the command line.
I installed all of them locally (the react and react-dom as PROD and the rest as DEV dependencies).Currently I don't have any packages installed globally.
After this, that's my package.json file:
{
"name": "reactandwebpack-tutorial",
"version": "1.0.0",
"description": "",
"main": "webpack.config.js",
"scripts": {
"test": "echo \"Error: no test specified\" && exit 1"
},
"author": "",
"license": "ISC",
"devDependencies": {
"awesome-typescript-loader": "^5.2.0",
"source-map-loader": "^0.2.3",
"typescript": "^2.7.2",
"webpack": "^4.16.4",
"webpack-cli": "^3.1.0"
},
"dependencies": {
"#types/react": "^16.4.7",
"#types/react-dom": "^16.0.6",
"react": "^16.4.2",
"react-dom": "^16.4.2"
}
}
At this point, when I run npm ls I get a bunch of errors, because of some optional dependency of webpack that apparently is missing (all the errors in the tree are inside webpack and below fsevents as following):
webpack#4.16.4
(...)watchpack#1.6.0
(...)chokidar#2.0.4
(...)fsevents#1.2.4 -> UNMET OPTIONAL DEPENDENCY
And everything below fsevents is also marked with UNMET DEPENDENCY
And when I run webpack command, I get a "webpack not recognized error".
Anyone can help? I've been trying to wrap my head around this for a while.
PS:
Npm -v 5.6.0
Node -v 8.11.3 //(that's what I get from the terminal,
//VSCode "About" tells me something different, I don't know why).
Using Visual Code
Version 1.24.0
Date 2018-06-06T17:35:40.560Z
Shell 1.7.12
Renderer 58.0.3029.110
Node 7.9.0
Architecture x64
The reason is because it was not linked to your env. When you install something globally, you have access to it everywhere, hence it works just by doing webpack. Since you installed everything locally, the binaries are located inside node_modules/.bin.
You have two options when you install something locallly.
Use npm scripts (npm run build, watch... whatever).
./node_modules/.bin/moduleName --flags
It is easier to create a npm script and add all the commands there.
SOLVED
Not sure the reason but it had something to do with the ./bin folder with the webpack-cli "ambient variable" not being available (I don't know it that would be the most accurate description).
When I try to run webpack, I get "not recognized error".
But when I run nodemodules\.bin\webpack-cli it works normally.
Everything is installed locally.
I can also run it with options, like nodemodules\.bin\webpack-cli --help
If you run "webpack", The CLI will find global webpack with is installed by (npm install webpack -g). To use webpack from local project. you should it to npm script.
package.json
{
"script": {
"start": "webpack"
}
}
By doing this, you can run npm start to run webpack.
I am trying to understand what I am doing wrong in this instance. I have a Node.js project with the following in my package.json
"scripts": {
"test": "mocha --recursive ./src/setup/*.js ./test/**/*.js"
},
"dependencies": {
"mocha": "^2.2.5"
}
When I run 'npm test' the mocha tests are run correctly:
$ npm test (successful run)
However when I try to just run the mocha command I have there in my package.json
$ mocha --recursive ./src/setup/*.js ./test/**/*.js"
This errors with:
-sh: mocha: command not found
I do not have mocha globally installed, I only have installed it via npm to this specific project.
If I install mocha globally then it works. Why doesn't it work when I have simply have mocha installed in the current directory's node_modules, yet it does with 'npm test'?
npm scripts automatically add mocha to the PATH:
If you depend on modules that define executable scripts, like test suites, then those executables will be added to the PATH for executing the scripts.
https://docs.npmjs.com/misc/scripts#path