I cannot find enough documentation on the alimiter filter.
https://ffmpeg.org/ffmpeg-filters.html#alimiter
I used -filter_complex alimiter=limit=0.5 and it applied to the file but it boosted the volume.
I thought it was supposed to hardlimit the volume down?
FFmpeg says through cmd limit range [0.0625 - 1]
ffmpeg -i audio.wav -y -acodec libmp3lame -b:a 320k -ar 44100 -ac 2 -joint_stereo 1 -filter_complex alimiter=limit=0.5 audio.mp3
Here's a look at the two files through Adobe Audition
Original
FFmpeg alimiter 0.5
I found the problem was here:
level
Auto level output signal. Default is enabled. This normalizes audio back to 0dB if enabled.
I tried chaining the filter like this using level=disabled
-filter_complex alimiter=level_in=1:level_out=1:limit=0.5:attack=7:release=100:level=disabled
It now hard limits without raising the volume.
Related
I'm trying to encode 6 arbitrary mono audio streams into a single AAC 5.1 track in an mp4 container (here with test streams):
ffmpeg -f lavfi -i testsrc=duration=10:size=100x100:rate=30 -f lavfi -i aevalsrc="-2+random(0)" -filter_complex "[1:a][1:a][1:a][1:a][1:a][1:a]join=inputs=6:channel_layout=5.1:map=0.0-FL|1.0-FR|2.0-FC|3.0-LFE|4.0-BL|5.0-BR[a]" -map '0:v' -map "[a]" -c:a aac -channel_layout 5.1 -t 10 testlfe.mp4
5 of the channels replicate the input audio just fine (modulo encoding). However, the LFE channel is lowpassed. Extracting with:
ffmpeg -i testlfe.mp4 -filter_complex "channelsplit=channel_layout=5.1:channels=LFE[LFE]" -map '[LFE]' testlfe.wav
I get a lowpassed rumble, instead of the original full white noise
(from ffmpeg -i testlfe.wav -lavfi showspectrumpic=s=640x320 testlfe.png)
Is there a way to prevent the lowpass from happening?
I couldn't find any references whether that's inherent to the AAC 5.1 encoding, something that ffmpeg does, or inherent to the decoding process. (I did decode my same test files using something that uses Microsoft MediaFoundation and the LFE channel was still lowpassed).
Turns out, the AAC codec inherently limits the LFE bandwidth, so there's no way around it.
(thanks to kesh in the comments) Wikipedia's Advanced Audio Encoding article claims the upper limit is 120Hz which matches my spectrogram, but doesn't cite a source. The actual ISO/IEC 13818-7:2006(en) Standard costs a bunch of money to read as usual, but in the free glossary there is an entry:
low frequency enhancement ( LFE ) channel:
limited bandwidth channel for low frequency audio effects in a multichannel system
Encode with
ffmpeg -i 6channels.wav -filter "channelmap=0|1|2|3|4|5:6.0(front)" -c:a libfdk_aac -ac 6 -profile:a aac_he -vbr 1 -cutoff 18000 -movflags +faststart 6channels-vbr1-fdk.m4a
It can also be done with regular aac codec.
I'm trying to transcode a single video file into multiple variants with different
resolutions/bitrates using GPU acceleration - in one command.
The encoding/decoding part is working great and produces results as expected.
Main issue
However when I try to resize using the scale_npp filter things start to turn green.
The resulting output from ffmpeg is just a green image
Similar to Issue1,
Issue2 Already asked in ffmpeg forum but there is no answer for this issue
Command i am using for conversion
ffmpeg -y -vsync 0 -hwaccel cuvid -c:v h264_cuvid -i input.mp4 -vf scale_npp=1280:720 -c:a copy -c:v h264_nvenc -b:v 360k -hls_time 10 -hls_segment_filename output/ts_%03d.ts output/m3.m3u8
My output video showing like
https://i.stack.imgur.com/EbVfV.jpg
I appreciate your help.
Thanks
I'm trying to run ffmpeg mp3 stream with segmentation for each hour. Everything is working perfectly, except for one thing: when i run the command, the file size doesn't grow in real-time as i need, it only grows in packages of 256k.
Is there a way to turn a "real-time mode"?
I'm using ubuntu 18.04 with ffmpeg 3.4.6
This is the code i'm trying to run on linux terminal:
ffmpeg -i http://radiocentova.conectastm.com:8363/stream -y -acodec libmp3lame -b:a 16k -ac 1 -ar 11025 -vn -strftime 1 -f segment -segment_time 3600 -flush_packets 1 #test_%Y%m%d%H%M%S+00.mp3
Recording with segment:
Recording without segment:
The flush packets option has to be directed to the child muxer (mp3 in this case), so
-segment_format_options flush_packets=1 instead of -flush_packets 1.
I would like to know if its possible to stream a png or any kind of image using ffmpeg. I would like to generate the image contiously using nodejs that updates every 10 seconds. I would like to display game stats with this in a corner and mix it with some background music or pre recorded commentary on it. Additionaly i would like to mix a video and the image should act like an overlay.
I am also not sure if using a transparent png image its possible to do
I couldn't get my head around doing the mixing with ffmpeg and its looks very complicated so i would like to get some help on it.
I have video files stored in a folder that i would like to continously stream and mix different music and an image on it. I would like to have it all continously working without stopping the stream.
Is it possible with ffmpeg cli on linux or i cant avoid using a desktop windows pc for such thing?
Well after digging through the documentation and asking for help on irc i came up with the following command:
First i store the list of tracks in a txt file such as:
playlist.txt
file 'song1.mp3'
file 'song2.mp3'
file 'song3.mp3'
Then i want to concat the tracks so i use -concat and specify the input as a txt file.
The second thing is using a static image as an input that i can manually update.
ffmpeg -re -y -f concat -safe 0 -i playlist.txt -framerate 1 -loop 1 -f image2 \
-vcodec libx264 -pix_fmt yuv420p -preset ultrafast -r 12 -g 24 -b:v 4500k \
-acodec libmp3lame -ar 44100 -threads 6 -qscale 3 -b:a 128k -bufsize 512k \
-f flv "rtmp://"
The rest is specificing the output format and other settings for streaming.
Thats what i came up with so far, not sure if theres any better way of doing this but right now it is sufficient enough for my needs.
I have an avi file that has different levels of audio. Is there a way to decrease and increase appropriately where needed the audio of my file using ffmpeg?
In ffmpeg you can use the volume filter to change the volume of a track. Make sure you download a recent version of the program.
Find out the gain to apply
First you need to analyze the audio stream for the maximum volume to see if normalizing would even pay off:
ffmpeg -i video.avi -af "volumedetect" -f null /dev/null
Replace /dev/null with NUL on Windows. This will output something like the following:
[Parsed_volumedetect_0 # 0x7f8ba1c121a0] mean_volume: -16.0 dB
[Parsed_volumedetect_0 # 0x7f8ba1c121a0] max_volume: -5.0 dB
[Parsed_volumedetect_0 # 0x7f8ba1c121a0] histogram_0db: 87861
As you can see, our maximum volume is -5.0 dB, so we can apply 5 dB gain. If you get a value of 0 dB, then you don't need to normalize the audio.
Apply the volume filter:
Now we apply the volume filter to an audio file. Note that applying the filter means we will have to re-encode the audio stream. What codec you want for audio depends on the original format, of course. Here are some examples:
Plain audio file: Just encode the file with whatever encoder you need:
ffmpeg -i input.wav -af "volume=5dB" output.mp3
Your options are very broad, of course.
AVI format: Usually there's MP3 audio with video that comes in an AVI container:
ffmpeg -i video.avi -af "volume=5dB" -c:v copy -c:a libmp3lame -q:a 2 output.avi
Here we chose quality level 2. Values range from 0–9 and lower means better. Check the MP3 VBR guide for more info on setting the quality. You can also set a fixed bitrate with -b:a 192k, for example.
MP4 format: With an MP4 container, you will typically find AAC audio. We can use ffmpeg's build-in AAC encoder.
ffmpeg -i video.mp4 -af "volume=5dB" -c:v copy -c:a aac -strict experimental -b:a 192k output.mp4
Here you can also use other AAC encoders. Some of them support VBR, too. See this answer and the AAC encoding guide for some tips.
In the above examples, the video stream will be copied over using -c:v copy. If there are subtitles in your input file, or multiple video streams, use the option -map 0 before the output filename.
The author's info is: Jon Skarpeteig in SuperUser
You can use my ffmpeg-normalize script for that.
First, install a recent version of ffmpeg. Then, install via pip install ffmpeg_normalize, then run it on an AVI file:
ffmpeg-normalize input.avi -o output.mkv -c:a aac -b:a 192k
Here, we're choosing to re-encode the audio with AAC at 192 kBit/s, and copy the video stream over to the output. This will perform EBU R128 normalization, but simple peak/RMS normalization is also possible.