I'm using free-jqGrid 4.13.5 and selectize 0.12.4.
I'm trying to apply selectize on my dropdowns in inline edit. But only one value is displayed in the dropdown.
editoptions: {
value: "FE:FedEx;TN:TNT;IN:Intime",
defaultValue: "Intime",
dataInit: function(element) {
$(element).selectize();
}
It works if I'm using select2, instead of selectize.
Fiddle: https://jsfiddle.net/henrik79/90hj0wd9/
The main problem seems to be the parent of drop-down of selectize. To fix the problem I suggest you to use dropdownParent: "body" option:
dataInit: function(element) {
$(element).selectize({
dropdownParent: "body"
});
}
The fixed demo https://jsfiddle.net/OlegKi/90hj0wd9/2/ uses the changes. I added some other CSS properties to improve the look of the results:
.selectize-dropdown-content {
font-size: 11px;
font-family: "Lucida Grande", "Lucida Sans", Arial, sans-serif
}
.selectize-input {
min-height: 1.7em;
}
.selectize-input {
padding: .4em .3em;
}
.DataTD .selectize-control {
height: 24px;
}
.ui-jqgrid tr.jqgrow > td {
border-color: inherit;
}
Related
When first loading the slick-carousel while using flex-boxes, the width of the slick-slide and the slick-track are set to 0 which hides the first slide until it triggers the next slide. If there is only one slide, it's hidden and will never show unless the window is manually resized.
First wrap your carousel with a container:
.myContainer {
position: fixed;
top: 0;
left: 0;
height: 100%;
width:100%;
}
<div class="myContainer">
<div class="myCarousel" (click)="navigate()"></div>
</div>
Next, be sure is to have min-height & min-width set to 0 for the .slick-slider.
CSS:
note the changes from the default slick-carousel styles are commented
// new definition
.slick-slider {
min-height: 1px;
min-width: 1px;
}
.slick-slide {
float: left;
[dir="rtl"] {
float: right;
}
img {
display: block;
}
&.slick-loading img {
display: none;
}
display: none;
&.dragging img {
pointer-events: none;
}
.slick-initialized {
display: block;
// set height and width
height: 100%; // helps to fix the loading issue when using flex-box - stretches slide vertically
width: 100% !important; // helps to fix the loading issue when using flex-box - shows slide upon load
}
.slick-loading {
visibility: hidden;
}
.slick-vertical {
display: block;
height: auto;
border: 1px solid transparent;
}
}
.slick-track {
position: relative;
left: 0;
top: 0;
display: block;
// set height
width: 100% !important; // helps to fix the loading issue when using flex-box
&:before,
&:after {
content: "";
display: table;
}
&:after {
clear: both;
}
.slick-loading {
visibility: hidden;
}
}
.slick-initialized {
display: block;
// set height and width
height: 100%; // helps to fix the loading issue when using flex-box - stretches slide vertically
width: 100% !important; // helps to fix the loading issue when using flex-box - shows slide upon load
}
.slick-loading {
visibility: hidden;
}
.slick-vertical {
display: block;
height: auto;
border: 1px solid transparent;
}
Finally, make sure you have defined the responsive setting when initializing your slick-slider:
// initialize carousel
private initializeCarouselSettings(){
this.carousel.slick({
accessibility: false,
autoplay: false,
arrows: false,
slidesToShow: 1,
pauseOnHover: false,
pauseOnFocus: false,
draggable: false,
swipe: false,
touchMove: false,
centerMode: true,
fade: this.isTransitionTypeFade(),
autoplaySpeed: this.getSlideInterval(),
speed: this.getSpeedValue(),
responsive: [ // fixes the loading issue when using flex-box
{
breakpoint: 1024,
settings: {
mobileFirst: false,
infinite: true,
speed: this.getSpeedValue(),
slidesToShow: 1,
centerMode: true,
variableWidth: false,
focusOnSelect: false
}
}
]
});
}
Im using the gulp-svg-sprite plugin.
https://github.com/jkphl/gulp-svg-sprite
https://github.com/jkphl/svg-sprite
I already have my classes and styles which I would like to sprite:
.header {
background: grey;
&:after {
content: "";
display: block;
height: 30px;
width: 30px;
background: url(images/icon1.svg);
}
}
This is my gulp task:
spriteConfig = {
mode : {
css : {
bust : true,
render : {
scss : true
}
}
}
};
gulp.task('sprite', function() {
gulp.src('images/svg/*.svg')
.pipe(svgSprite(spriteConfig))
.pipe(gulp.dest('dest/'));
});
The task generates this type of SASS:
%svg-common {
background: url("svg/sprite.css-c3700f6a.svg") no-repeat;
}
.svg-icon1 {
#extend %svg-common;
background-position: 50% 0;
}
.svg-icon1-dims {
width: 1024px;
height: 348px;
}
This isnt ideal as I need to import these svg- classes which I wont use on there own, and I then need to use 2 extends:
.header {
background: grey;
&:after {
content: "";
display: block;
#extend .svg-icon1;
#extend .svg-icon1-dims;
}
}
Is there a way of generating mixins instead so I could jsut have something like:
.header {
background: grey;
&:after {
content: "";
display: block;
#include svg-icon1;
}
}
As per the docs:
It comes with a set of Mustache templates for creating stylesheets in
good ol' CSS or one of the major pre-processor formats (Sass, Less and
Stylus). Tweaking the templates or even adding your own custom output
format is really easy, just as switching on the generation of an HTML
example document along with your sprite.
Have a look and customize the following file:
https://github.com/jkphl/svg-sprite/blob/master/tmpl/css/sprite.scss
Danny H was correct. Here is my code. Notice that ive also used a prefix in my spriteConfig.
spriteConfig = {
mode : {
css : {
bust : true,
prefix : "#mixin sprite-%s",
render : {
scss: {
template: 'sprite.scss.handlebars'
}
}
}
}
};
In sprite.scss.handlebars:
{{#hasMixin}}#mixin {{mixinName}} {
background: url("{{{sprite}}}") no-repeat;
}
{{#hasCommon}}.{{commonName}} {
#include {{mixinName}};
}
{{/hasCommon}}{{/hasMixin}}{{^hasMixin}}{{#hasCommon}}.{{/hasCommon}}{{^hasCommon}}#mixin {{/hasCommon}}{{commonName}} {
background: url("{{{sprite}}}") no-repeat;
}
{{/hasMixin}}{{#shapes}}{{#selector.shape}}{{expression}}{{^last}},
{{/last}}{{/selector.shape}} {
{{^hasCommon}}{{#hasMixin}}#include {{mixinName}};{{/hasMixin}}{{^hasMixin}}#include {{commonName}};{{/hasMixin}}
{{/hasCommon}}background-position: {{position.relative.xy}};{{#dimensions.inline}}
width: {{width.outer}}px;
height: {{height.outer}}px;{{/dimensions.inline}}
width: {{width.outer}}px;
height: {{height.outer}}px;
}
{{/shapes}}
..................................................
Existing mixins:
.mixin_1 {
height: 1px;
}
.mixin_2 {
height: 2px;
}
.mixin_3 {
height: 3px;
}
.function(#get) {
#get();
}
CALL:
.a{
.function(mixin_1);
}
.b{
.function(mixin_2);
}
.c{
.function(mixin_3);
}
RESULT:
.a{
height: 1px;
}
.b{
height: 2px;
}
.c{
height: 3px;
}
Question: how to do this? It's possible with current language specifications?
You cannot currently do a dynamic call to a mixin based off a variable directly. You can make your function() mixin into a "caller" or "getter" mixin in which you register the mixins that can be called by your function() mixin, like so (which utilizes pattern matching):
LESS
.function(#get) {
.-(#get); //call for mixin
//register mixins you want to call with function
.-(mixin_1) { .mixin_1; }
.-(mixin_2) { .mixin_2; }
}
.mixin_1 {
height: 1px;
}
.mixin_2 {
height: 2px;
}
#block {
.function(mixin_1);
}
Outputs
.mixin_1 {
height: 1px;
}
.mixin_2 {
height: 2px;
}
#block {
height: 1px;
}
Of course, if you want the mixins invisible to the css, then change them to this:
LESS change (added parenthesis)
.mixin_1() {
height: 1px;
}
.mixin_2() {
height: 2px;
}
New Output
#block {
height: 1px;
}
Do you need it?
That level of abstraction can be useful at times, but often simply a pattern matching on the mixins will suffice. You would have to determine that. So with this simple example, it would be better to reduce to something like this:
.setHeight(1) {
height: 1px;
}
.setHeight(2) {
height: 2px;
}
#block {
.setHeight(1);
}
More complex examples of mixins may not be so easily reduced, and then a mixin like what you want may be useful.
I think your code do same thing like this:
.mixin_1() {
height: 1px;
}
.mixin_2() {
height: 2px;
}
#block {
.mixin_1();
}
And output will be:
#block {
height: 1px;
}
I was asking about little different thing. However I found solution:
.function(#get) {
.-(#get); //call for mixin
//register mixins you want to call with function
.-(mixin) { .mixin; }
}
#block {
.mixin() {
height: 1px;
}
.function(mixin);
}
#block {
.mixin() {
height: 2px;
}
.function(mixin);
}
It outputs exactly what i wanted:
#block {
height: 1px;
}
#block {
height: 2px;
}
Overall, thanks for help.
I've been searching for a way to do this effect: http://www.discovershadow.com/
Especially the iPhone reveal part at the bottom where the iPhone stays but the content inside changes at the same time as the background.
Can this be achieved with only css or is it something much more complicated?
This is the way that I found to do this... no one seemed interested in the question but I hope you like the answer:
<html>
<head>
<style>
html, body {
min-height: 100%;
margin: 0;
padding: 0;
}
#container {
height: 100%;
width: 100%;
overflow-y: scroll;
position: fixed;
}
.items {
width: 100%;
height: 102%;
background-attachment: fixed;
background-position: 50%;
background-repeat: no-repeat;
position: relative;
}
#box1 {
background-image: url(yourimage1.png);
background-color: #03F;
}
#box2 {
background-image: url(yourimage2.png);
background-color: #609;
}
#box3 {
background-image: url(yourimage3.png);
background-color: #3C0;
}
</style>
</head>
<body>
<div id="container">
<div class="items" id="box1"></div>
<div class="items" id="box2"></div>
<div class="items" id="box3"></div>
</div>
</body>
</html>
Yes can achieve that... You have not added any code or not even tried i think. Here is simple code for you to get you started.
.a
{
background-image : url('http://hdwallpaper2013.com/wp-content/uploads/2013/02/Beautiful-Nature-Images-HD-Wallpaper.jpg');
height: 200px;
width: 100%;
position: fixed;
}
p
{
color : #000;
font-size: 72px;
position: relative;
z-index: 999;
}
fiddle
This effect does require CSS + Javascript, there is no way to do it effectively without using these technologies. You could have the iPhone centred on screen and the rest of the screen move around it but it wouldn't create such as nice effect as seen on the website.
I would personally recommend looking at the source of the target website and investigate yourself how it was achieved, never hurts to have a sneek peek at source from other websites.
Looking at that sites script.js page they handle scrolling with
// handle scrolling
$window.scroll(function() {
handleScroll();
});
Which does this. You will need to look at the full code to work out exactly how its done.
// handle scroll
function handleScroll() {
scrolledWin = getPageScroll();
$body.addClass('scrolling');
// show logo
if((scrolledWin * 1.5) > winH) {
$body.addClass('content');
}
// show navigation
if(scrolledWin > 50) {
$body.addClass('scrolled');
}
// app img animation
if(topOff >= scrolledWin) {
$appImg.removeClass('sticky');
} else {
$appImg.addClass('sticky');
}
if(topOff2 >= scrolledWin) {
$appImg2.removeClass('sticky');
} else {
$appImg2.addClass('sticky');
}
// fix navigation issue on top scroll
if ((scrolledWin > -(winH - (winH * (f1 *0.8)))) && $('#hook2').hasClass('inViewport')) {
$nav.attr("class", "").addClass('a2');
} else if ($('#hook2').hasClass('inViewport')) {
$nav.attr("class", "").addClass('a1');
}
//fix navigation issue between how it works and next section
if ($s9.hasClass('inViewport')) {
if ($('#hook5').hasClass('inViewport')) {
$nav.attr("class", "").addClass('a5');
} else {
$nav.attr("class", "").addClass('a4');
}
}
//fix navigation issue between Experts and next section
if ($sExperts.hasClass('inViewport')) {
if ($('#hook6').hasClass('inViewport')) {
$nav.attr("class", "").addClass('a6');
} else {
$nav.attr("class", "").addClass('a5');
}
}
}
Ref: http://www.discovershadow.com/js/script.js?v=2.14
I'm looking for a solution to use a mixin for browser-specific CSS hacks.
I'm using JavaScript to add the browser tag in the HTML class. Like .ie .ie7 .ie8 .ie9
I would like to use the mixin like:
.box-test {
margin: 10px;
#include browser(ie7) {
margin: 20px;
}
}
DESIRED OUTPUT:
.box-test {
margin: 10px;
}
.ie7 .box-test {
margin: 20px;
}
the mixin i tried to make:
#mixin browser($browserVar) {
#if $browserVar == ie7 {
.ie7 { #content }
}
#else if $browserVar == ie8 {
.ie8 { #content; }
}
#else if $browserVar == ie9 {
.ie9 { #content; }
}
}
the problem is the output is:
.box-test {
margin: 10px; }
.box-test .ie7 {
margin: 20px; }
The absolute simplest mixin would be like so:
#mixin legacy-ie($ver: 7) {
.ie#{$ver} & {
#content;
}
}
Output:
.baz {
background: #CCC;
#include legacy-ie {
background: black;
}
}
If you wanted to emit styles that work for multiple IE versions at once without duplication, then this would be one way to do it:
$default-legacy-ie: 7 8 9 !default;
#mixin legacy-ie($versions: $default-legacy-ie) {
$sel: ();
#each $v in $versions {
$sel: append($sel, unquote('.ie#{$v} &'), comma);
}
#{$sel} {
#content;
}
}
.foo {
background: red;
#include legacy-ie {
background: green;
}
}
.bar {
background: yellow;
#include legacy-ie(7 8) {
background: orange;
}
}
Output:
.foo {
background: red;
}
.ie7 .foo, .ie8 .foo, .ie9 .foo {
background: green;
}
.bar {
background: yellow;
}
.ie7 .bar, .ie8 .bar {
background: orange;
}
If you want to be able to suppress all of the IE kludges all you need to add is one variable and an #if block:
$enable-legacy-ie: true !default;
#mixin legacy-ie($ver: 7) {
#if $enable-legacy-ie {
.ie#{$ver} & {
#content;
}
}
}
Set $enable-legacy-ie to false at the top of the file you don't want to have the IE specific styles, set it to true if you do want the styles included. You could easily write a reverse mixin to hide styles that old IE can't make use of so that the IE specific file stays nice and small.
You're overcomplicating things. :) It could be as simple as that:
.box-test {
margin: 10px;
.ie-7 & {
margin: 20px; } }
Result:
.box-test {
margin: 10px;
}
.ie-7 .box-test {
margin: 20px;
}
I have tried adding mixin for "#-moz-document url-prefix()" FF hack but it was not recognized by SASS and SASS was throwing error. so I think better solution is to create _hack.sass file and add css hacks which will not be compiled by SASS. I include this file whenever required.
#import "hack";
I am adding answer this as I feel it will be useful to someone who is struggling to get mozilla/safari hack works.