i have a website and one virtual directory called prog .looking an iis redirect rule for the following condition.
1.i need to redirect all non www http request http://domain/prog to https://www.domain/prog
2.redirect http www request http://www.domain/prog to https://www.domain/prog
3.redirect https://domain/prog to https://www.domain/prog
i have follow the below url
iis url redirect http to non www https
but one condtion not working
https://domain/prog to https://www.domain/prog
<rewrite>
<rules>
<rule name="SecureRedirect" stopProcessing="true">
<match url="^(.*)$" />
<conditions>
<add input="{HTTPS}" pattern="off" />
<add input="{HTTP_HOST}" pattern="^(www\.)?(.*)$" />
</conditions>
<action type="Redirect" url="https://www.{C:2}/prog" redirectType="Permanent" />
</rule>
</rules>
i have applied url rewrite on prog Virtual directory and its worked
<rewrite>
<rules>
<clear />
<rule name="Redirect non-www OR non-https to https://www">
<match url=".*" />
<conditions logicalGrouping="MatchAny">
<add input="{HTTP_HOST}" pattern="^domain.com$" />
<add input="{HTTPS}" pattern="off" />
</conditions>
<action type="Redirect" url="https://www.domain.com/prog/{R:0}" redirectType="Permanent"/>
</rule>
</rules>
</rewrite>
Related
I have two domains. Both read from the same source. That is, the path of their files on the server is the same with same web.config file. I want both of them to be redirect to the HTTPS path without WWW, regardless of the conditions that are called in the URL. Similar to below
HTTP to HTTPS
WWW to non-WWW
for example.com and example.co
I tried to use the below code:
<rewrite>
<rules>
<rule name="Redirect to HTTPS without www" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll">
<add input="{HTTPS}" pattern="^OFF$" />
<add input="{HTTP_HOST}" pattern="^(www\.)?(.*)$" />
</conditions>
<action type="Redirect" url="https://{C:2}/{R:1}" redirectType="Permanent" />
</rule>
<rule name="Special case for HTTPS with www" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll">
<add input="{HTTPS}" pattern="^ON$" />
<add input="{HTTP_HOST}" pattern="^(www\.)(.*)$" />
</conditions>
<action type="Redirect" url="https://{C:2}/{R:1}" redirectType="Permanent" />
</rule>
</rules>
</rewrite>
But this code cannot be considered for both domains com and co. Because it redirects only to the com domain.
Try splitting the two different domain names into two rules, and add the full hostname to your rules, which will trigger your rule for a specific domain only:
<rewrite>
<rules>
<rule name="Redirect example.com to HTTPS without www" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll">
<add input="{HTTPS}" pattern="^OFF$" />
<add input="{HTTP_HOST}" pattern="^(www\.)?example.com$" />
</conditions>
<action type="Redirect" url="https://example.com/{R:1}" redirectType="Permanent" />
</rule>
<rule name="Redirect example.co to HTTPS without www" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll">
<add input="{HTTPS}" pattern="^OFF$" />
<add input="{HTTP_HOST}" pattern="^(www\.)?example.co$" />
</conditions>
<action type="Redirect" url="https://example.co/{R:1}" redirectType="Permanent" />
</rule>
</rules>
</rewrite>
URL Rewrite rule for redirecting from http to https:
<rewrite>
<rules>
<rule name="http to https" enabled="false" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="^OFF$" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}/{R:1}" />
</rule>
</rules>
</rewrite>
However, when you go directly to a subfolder like http://www.example.com/employees via an old bookmark or by typing the address into the browser, it doesn't redirect to https://www.example.com/employees but stays on http://www.example.com/employees.
Oddly enough, we have the same rewrite rules for a dev site, and it will redirect from http://dev.example.com/employees to https://dev.example.com/employees.
Very strange. Any ideas?
This is what I use - I add it to the applicationhost.config file, so it's at the global level. It's a little different then yours, I run many different sites and never have the issue you're describing doing it this way.
<rule name="Root Redirect to HTTPS" enabled="true" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{SERVER_PORT}" pattern="^80$" />
<add input="{HTTP_HOST}" pattern="example\.com$" />
</conditions>
<action type="Redirect" url="https://www.example.com/{R:0}" />
</rule>
I am trying to force a website running under IIS to always run in https mode and redirect to it's full root name which includes www in order for the SSL certificate to work properly.
Below is the web.config entry:
<system.webServer>
<rewrite>
<rules>
<clear />
<rule name="Redirect to https" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="off" ignoreCase="true" />
<add input="{HTTP_HOST}" pattern="^somewebsite.com$" ignoreCase="true" />
</conditions>
<action type="Redirect" redirectType="Permanent" url="https://www.{HTTP_HOST}{REQUEST_URI}" />
</rule>
</rules>
</rewrite>
</system.webServer>
This works on first time requests, for instance someone requests: somewebsite.com in the browser URI for the very first time, they will be automatically redirected to https://www.somewebsite.com. However, once the site is loaded and if user manually removes the www or https in the browser URI, the server does not perform subsequent redirects. Is that by design and is it possible for the rule to always execute?
This is what I use on all our live SSL sites. I use 2 rules and never had any problem with these:
<rule name="Redirect domain.com to www" patternSyntax="Wildcard" stopProcessing="true">
<match url="*" />
<conditions>
<add input="{HTTP_HOST}" pattern="domain.com" />
</conditions>
<action type="Redirect" url="https://www.domain.com/{R:0}" />
</rule>
<rule name="HTTP to HTTPS" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="^OFF$" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}/{R:1}" />
</rule>
Using standard iis url rewrite module technique to redirect http to https does not work with iisnode.
I am having the following rule configuration to redirect http to https:
<rule name="HTTP to Prod HTTPS redirect" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="off" ignoreCase="true" />
</conditions>
<action type="Redirect" redirectType="Found" url="https://{HTTP_HOST}/{R:1}" />
</rule>
The problem is that requesting
http://domain.net is redirected to the https://domain.net/server.js
Any ideas how to get rid of the "server.js" part of the url?
Ok, the solution is simple. I just need to put HTTP -> HTTPS url rewrite rule at the top. Final configuration can then look like this:
<rewrite>
<rules>
<rule name="HTTP to Prod HTTPS redirect" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTPS}" pattern="off" ignoreCase="true" />
</conditions>
<action type="Redirect" redirectType="Found" url="https://{HTTP_HOST}/{R:1}" />
</rule>
<!-- Don't interfere with requests for logs -->
<rule name="LogFile" patternSyntax="ECMAScript" stopProcessing="true">
<match url="^[a-zA-Z0-9_\-]+\.js\.logs\/\d+\.txt$" />
</rule>
<!-- Don't interfere with requests for node-inspector debugging -->
<rule name="NodeInspector" patternSyntax="ECMAScript" stopProcessing="true">
<match url="^server.js\/debug[\/]?" />
</rule>
<!-- First we consider whether the incoming URL matches a physical file in the /public folder -->
<rule name="StaticContent">
<action type="Rewrite" url="public{REQUEST_URI}" />
</rule>
<!-- All other URLs are mapped to the Node.js application entry point -->
<rule name="DynamicContent">
<conditions>
<add input="{REQUEST_FILENAME}" matchType="IsFile" negate="True" />
</conditions>
<action type="Rewrite" url="server.js" />
</rule>
</rules>
</rewrite>
I need to redirect non-www URLs to www URL for both HTTP and HTTPS URLs. I tried following rules in web.config.
<rule name="Redirect to WWW" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{HTTP_HOST}" pattern="^example.com$" />
</conditions>
<action type="Redirect" url="http://www.example.com/{R:0}" redirectType="Permanent" />
</rule>
<rule name="Redirect to WWW https" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{HTTPS}" pattern="^example.com$" />
</conditions>
<action type="Redirect" url="https://www.example.com/{R:0}" redirectType="Permanent" />
</rule>
It works perfectly for non-ssl URL but in case of SSL it redirect from https://example.com to http://www.example.com.
For a safer rule that works for both Match Any and Match All situations, you can use the Rewrite Map solution. It’s a perfectly good solution with the only drawback being the ever so slight extra effort to set it up since you need to create a rewrite map before you create the rule. In other words, if you choose to use this as your sole method of handling the protocol, you’ll be safe.
You can create a Rewrite Map called MapProtocol, you can use {MapProtocol:{HTTPS}} for the protocol within any rule action.
<rewrite>
<rules>
<rule name="Redirect to www" stopProcessing="true">
<match url="(.*)" />
<conditions trackAllCaptures="false">
<add input="{HTTP_HOST}" pattern="^example.com$" />
</conditions>
<action type="Redirect"
url="{MapProtocol:{HTTPS}}://www.example.com/{R:1}" />
</rule>
</rules>
<rewriteMaps>
<rewriteMap name="MapProtocol">
<add key="on" value="https" />
<add key="off" value="http" />
</rewriteMap>
</rewriteMaps>
</rewrite>
Reference
Other answers here are unnecessary long, here's the rule i use (just copy and paste) :
<rule name="ensurewww" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{CACHE_URL}" pattern="^(.+)://(?!www)(.*)" />
</conditions>
<action type="Redirect" url="{C:1}://www.{C:2}" redirectType="Permanent" />
</rule>
This will redirect to the www version while preserving the HTTP and HTTPS protocol
Hope this helps.
Since 2018, consider to use everytime https (SSL) !
So I use redirect to www and to https together.
<rule name="Redirect to www" stopProcessing="true">
<match url="(.*)" />
<conditions trackAllCaptures="false">
<add input="{HTTP_HOST}" pattern="^example.com$" />
</conditions>
<action type="Redirect" url="https://www.example.com/{R:1}" redirectType="Permanent" />
</rule>
<rule name="HTTP/S to HTTPS Redirect" enabled="true" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAny">
<add input="{SERVER_PORT_SECURE}" pattern="^0$" />
</conditions>
<action type="Redirect" url="https://{HTTP_HOST}{REQUEST_URI}" redirectType="Permanent" />
</rule>
more info here :
https://forums.realmacsoftware.com/t/effective-july-2018-google-s-chrome-browser-will-mark-non-https-sites-as-not-secure/18597
I know this is an old post but it's not fully answered. I ended up extending Satpals answer
First rule catches http + www and second one catches non-www
For some reason i could not use MapProtocol in the fist Rule but it works with https written directly into the url.
<rewrite>
<rules>
<rule name="Special case www & HTTPS off" enabled="true" stopProcessing="true">
<match url="(.*)" />
<conditions logicalGrouping="MatchAll" trackAllCaptures="false">
<add input="{HTTP_HOST}" pattern="^www\.example\.com$" />
<add input="{HTTPS}" pattern="off" />
</conditions>
<action type="Redirect" url="https://www.example.com/{R:1}" redirectType="SeeOther" />
</rule>
<rule name="Redirect to www & HTTPS" enabled="true" stopProcessing="true">
<match url="(.*)" />
<conditions trackAllCaptures="false">
<add input="{HTTP_HOST}" pattern="^example\.com$" />
</conditions>
<action type="Redirect" url="{MapProtocol:{HTTPS}}://www.example.com/{R:1}" redirectType="SeeOther" />
</rule>
</rules>
<rewriteMaps>
<rewriteMap name="MapProtocol">
<add key="on" value="https" />
<add key="off" value="http" />
</rewriteMap>
</rewriteMaps>
</rewrite>
This worked fine for me:-
<rewrite>
<rules>
<rule name="Redirect to WWW" stopProcessing="true">
<match url=".*" />
<conditions>
<add input="{HTTP_HOST}" pattern="^myExample.in$" />
</conditions>
<action type="Redirect" url="https://www.myExample.in/{R:0}" redirectType="Permanent" />
</rule>
</rules>
</rewrite>
This post is basically for those who need to redirect non-www to www URL in windows hosting.
In web.config file as below code:
<system.webServer>
<rewrite>
<rules>
<rule name=”Redirect example.com to www.example.com HTTP” patternSyntax=”ECMAScript” stopProcessing=”true”>
<match url=”.*” />
<conditions>
<add input=”{HTTP_HOST}” pattern=”^example.com$” />
<add input=”{HTTPS}” pattern=”off” />
</conditions>
<action type=”Redirect” url=”http://www.example.com/{R:0}” redirectType=”Permanent” appendQueryString=”true”/>
</rule>
<rule name=”Redirect example.com to www.example.com HTTPS” patternSyntax=”ECMAScript” stopProcessing=”true”>
<match url=”.*” />
<conditions>
<add input=”{HTTP_HOST}” pattern=”^example.com$” />
<add input=”{HTTPS}” pattern=”on” />
</conditions>
<action type=”Redirect” url=”https://www.example.com/{R:0}” redirectType=”Permanent” appendQueryString=”true”/>
</rule>
</rules>
</rewrite>
</system.webServer>
In the above code please note there are two rules used one for HTTP and another for HTTPS. To avoid clashing of HTTP and HTTPS in the same rule, here used two separate patterns.
I hope it works for you guys…!!
Follow the Step Below
Login to your website's cPanel
Click on Hosting Setting
Select your preferred domain as www.example.com