There's quite a bit of information out there on this topic, but for some reason I just can't get it to work. This is on a raspberry pi running the 'DietPi' flavor over the raspian distro, and is perhaps what separates my question from the others.
So I have a GUI application that I wish to launch at boot, after the LXDE session has begun. So I have utilized the following file here:
/etc/xdg/lxsession/LXDE/autostart
and added the line:
#/myapplication
This works, however, it launches multiple instances of this program, and the first one always crashes. This creates problems because there's some competition for resources (IO, files, etc). So what I did was create script file, /myapplication-autostart.sh instead like so:
if pgrep "myapplication" > /dev/null
then
echo "my application is already running"
else
/myapplication
fi
and then changed /etc/xdg/lxsession/LXDE/autostart to #/myapplication-autostart.sh. Now what I find is the program launches once, but the instance crashes. It crashes when it attempts to create a window (opencv imshow). This is strange because the program will also run headless if an X-session is not available, but for some reason it crashes and I do not know where to check why.
Also, to test it wasn't an issue with the script file, I commented everything out except the /myapplication and I have found the script file runs in a continuous loop and every time I close the application it opens back up. I'm not sure why this is either.
I've tried adding a sleep delay in the script and it does not help. For whatever reason, it seems the LXDE autostart script is ran at least 3 times when booting the pi and the circumstances around the first cause the program to crash. Does anybody understand this sequence and behavior of calling this autostart script?
It is also possible to use the XDG standard Autostart - which is independent of the used desktop environment - by placing desktop files at
$XDG_CONFIG_HOME/autostart (by default ~/.config/autostart)
or for system-wide autostarts at $XDG_CONFIG_DIRS/autostart (by default /etc/xdg/autostart).
Such a .desktop-file could look like:
[Desktop Entry]
Type=Application
Version=1.0
Name=JDownloader
Exec=/usr/local/bin/my-application.sh
Categories=Utilities
The specification of desktop-files can be found at freedesktop.org.
Here was the final solution...
/etc/xdg/lxsession/LXDE/autostart added the line:
/myapplication-autostart.sh
and /myapplication-autostart.sh was changed to:
#!/bin/bash
if pgrep "myapplication" > /dev/null
then
echo "my application is already running"
else
if [[ "$DISPLAY" = ":0" ]]
then
/myapplication
fi
fi
I had to write the display variable to file in combination with the errors to file to discover the issue. At login 2 X sessions were created, display ":1" and display ":0", in that sequence. Display ":1" crashed because, although not headless, it was not initialized to a particular resolution and there was some resizing code in my program. Display ":0" was the actual display on the HDMI out and the one I wanted. Really, the conditional check to see if the application isn't necessary but I left it in there to be safe. I could have also left the # on the LXDE autostart file but it got annoying in the cases I wanted to close the application because it'd keep re-opening. Possibly I'll put it back later.
Thanks for the help!
First, some comments about opening several instances of the program: when you use "#" at the beginning of the line on the startup file (ex.: #/myapplication), this requests your system to try to launch the program, but if the program fails to open correctly, then the system will try to open it multiple times until it opens correctly -- if you remove "#" from the line beginning, then the system will only try to open the program once.
Now, to find out why the program is failing, I advise you to add
2> /file/log
to the end of every command on your script. Doing so would append any error message to a log (/file/log), and analyzing those error messages would be key to find out why the program is misbehaving.
One important note: if your program needs root privileges to run, then it will fail when called via /etc/xdg/lxsession/LXDE/autostart, as this method calls programs without elevated permissions.
This is an old thread but I was having problems getting autostart to start all the tasks listed. After many days I concluded there were one or more "invisible" characters that autostart didn't like. So I deleted the lines for the tasks that didn't start and retyped them. That solved the problem!
I think I corrupted the lines because I was editing some of the lines on my Windows computer. It was likely inserting CR with LF or some other stuff. I WILL NEVER EDIT TEXT FOR LINUX USING WINDOWS!
Maybe someone else will hit this problem and this may help them. I don't know where else to put this information.
Related
I have a LiveCode app standalone that needs to know if there is a job waiting in the MacOS print queue before printing. If app user 1 prints the 2 page report and just one page prints (out of paper) then user 2 comes along and prints the report, the first page out is user 1's report and this is causing mixups. I would like to check the MacOS print queue and prevent printing if there is a job already waiting.
It's not something I've ever needed to do, but I suspect that this capability is not included in LiveCode natively. Instead your best bet will probably be to use LiveCode's shell() function to run a unix terminal command. For instance, lpstat is a command line utility that allows you to query various things about printers connected to your Mac. The following command, run in the MacOS terminal, shows which printers are available and their current status.
lpstat -p
In LiveCode you use the shell() function to call this command line utility, like so:
put shell("lpstat -p") into tPrinterStatus
To find out more about lpstat, open the Terminal and look up the man page:
man lpstat
Lots of options for that utility will appear. There should be one that gives you the information you need.
I'm coding a Rust app and since it's fairly small and there don't appear to be any stable UI frameworks, I've made it run in the console using println! and whatnot for input/output. However since this program is intended to be used by people directly after downloading from the internet (due to its use case), they're likely to just double click on it instead of navigating to their downloads directory in a terminal and running it from there.
This is a problem because on Linux, it runs in the background waiting for input and looks like it's not working. On Windows, Rust programs do open in CMD by default. (and in fact many of the search results for my question were about disabling this behavior - the exact opposite of what I want!).
So is it possible to somehow make my application open in the system's default terminal? My preferred way would be to somehow embed in the executable to open in terminal (similar to the -mconsole compiler flag on MinGW). Otherwise would it be possible to detect it's in the background and fork it into a terminal? If that's not possible then is it at least possible to detect that the app is not running in a terminal and throw up a message box telling the user to run in a terminal?
My app is cross-platform but I'm OK with writing code conditionally compiled on one OS.
One typical way would be to distribute a program.sh along with your executable. If .sh extension is bound to opening a terminal in their window manager of choice, it would open automatically. If not - it is enough of a hint for running it from the shell.
Without this file you could:
Detect if the program is already running inside a terminal can be done with isatty(). There's a crate for it.
If not, spawn the terminal app process (see process::Command) and relaunch the program with it by passing its path to the terminal command line options. As #Caesar mentioned there's a bunch of popular terminals that you might want to check for presence on Linux. If nothing is found, xterm could sometimes be a fallback.
I'm using a raspberry pi 2 to show all the video's in a folder. The raspberry automatically boots up (with a generic electric timer) in to console (not the gui) and after it boots it runs a bashscript I found here. This bashscript contains an infinite loop to play all the videos in a folder using omxplayer.
When I boot in to consolemode and manually start the script everything works perfectly. The terminal screen clears, the first video starts, and after it ends there is a second or two of black screen (empty terminal) and the second video starts playing. This is exactly what I want.
However, when I use crontab to start this script (#reboot /path/to/script.sh) the terminal messages stay and it doesn't clear everything between video's.
I've tried creating my own script that first clears everything, and then calls the second script. But this doesn't work.
I'm really really new in this field (but I'm having fun) so any pointers in the right direction would be appreciated!
P.S. I edited the /boot/cmdline.txt file so it doesn't display critical kernal logs as a work-around.
You should not be doing this using cron. You should be changing the inittab so that it runs outside any environment that may be created. See the inittab(5) man page for details. You may also be interested in openvt(1) as well.
Problem:
I have an extra set of top and bottom gnome-panels for a second monitor. When I undock my lenovo Thinkpad (T510), the extra top and bottom panels remain, so I have two on top and two on the bottom. I am currently running a RHEL6/Fedora (x86_64) gnome (2.28.2) instance with xmonad (0.9.1-6.1.el6) set as the window manager, using the xmonad extensions to work within gnome.
Tried:
I've used acpi and found a code for docking and undocking, but when I try to utilize a script I found in this blog post, it gets zero for the call to xrandr. The script works when called on its own from the terminal. I've tried calling a separate looping script in its own thread and it keeps getting zero for the value, long after the screen(s) update(s).
I have figured out how to have a script loop every X seconds and check for a file which is touched into existence in the event of the script getting a zero, then performing the necessary change, but I don't like that approach.
Question:
I'm hoping someone knows a place I can drop a call to the referenced script and have my panels come and go as I would expect without needing to initiate the script manually.
Thanks!
Update: I have added a bounty of 50 (max I can do) for an answer.
Ben
I guess one of the problems listed below occures (or both):
1) looks like your xrandr snippet doesn't return proper values because the $DISPLAY environment variable is not set correctly. Acpi handler script normally runs as a user which is not the user running your current X session. That way xrandr just does not know which $DISPLAY to access.
2) if $DISPLAY is set correctly, the acpid user might still not be able to access your running xsession. You might check whether the script will work over acpi handler, if you execute xhost + as the user who is currently runging the current xsession with $DISPLAY specified in your script. This will disable access control for X. You can reenable it with xhost - again.
Check it, I hope it helps or will at least point you in which direction to dig.
Say for example, to open multiple instances of gedit editor I wrote a shell script like this-
gedit&
gedit&
gedit&
gedit&
But after I ran my shell script ./example.sh, I can find only one instance of gedit! I've even used the & operator, so that the shell doesn't wait for one instance to finish. Still I cannot see four instances of gedit.
Also I tried directly from the command prompt. If I just enter gedit& on the command line, it showed 1906 ( this is the PID of the newly created gedit process ), started one new gedit instance and returned to prompt again. When I typed gedit& on the command line, it showed 1909 this time, but no new instance of gedit! And I couldn't find any process with PID 1909 in the System Monitor too. Where did this new process go away?
Is the happening specific to gedit? If so, what is the generic behavior when creating multiple instances of a program?
It is specific to gedit. You are likely looking for gedit --new-window &.
From man gedit:
--new-window
Create a new toplevel window in an existing instance of gedit.
I came here, trying to start multiple instances of audacious.
Allowing only one instance is actually harder to implement, because the program needs to find and communicate with the instance already running. This is done via D-Bus. In order to prevent communication with the already started instance you can run the program in another D-Bus session:
nohup dbus-run-session audacious &
nohup dbus-run-session audacious &
Note: nohup will keep the program running even if the terminal is to be closed.
This method should also work for other programs which do not let the user choose between multiple instance vs. one instance.
Beware that this might introduce bugs, if multiple instances are accessing the same configuration files.
Tested with xfce 4.14.1 and dbus 1.12.20
For Scite:
scite -check.if.already.open=false &
A word of caution:
If you, like me, have your system running for multiple months and have edited some of your shortcuts or aliases to open with this hack, then after a while some programs will not start anymore because there are already too many open D-Bus session. In this case you have to kill the started D-Bus sessions, which do not close when the started program closes. The other way around, killing the D-Bus session, will also kill the opened program, so use with care! For me personally, I have some long running autostarted programs which I want to keep open (firefox), so I kill all but the first 10 D-Bus sessions with this:
for pid in $( ps --sort start_time -aux | grep dbus-daemon | tail +10 | awk '{ print $2; }' ); do kill $pid; done
The cleanest solution would be to write a launcher script which waits for the program to finish and then closes the opened D-Bus sessions. But this is a bit more difficult than it seems because it is hard to find the PID of the corresponding D-Bus session.
P.S.: I also used this hack because there seems to be some program on my system which, after a while, slows down the system's default file open dialog to take multiple minutes if not longer to open! Programs then seem to hang when trying to save or open files. A new D-Bus sessions seems to fix this for some reason. While writing this, I found that pkill gvfsd-trash also works and that it may have been this bug. So until this gets shipped, I guess I'll add pkill gvfsd-trash to my crontab.
This seems specific to gedit, perhaps there's some option to turn off the check for a running instance.
Looks like gedit is first looking for a running instance and simply ignores further start-requests (just a wild guess). But the manual page says, that you can open another window:
--new-window
Create a new toplevel window in an existing instance of gedit.
That wouldn't exactly solve your problem, but maybe that's what you were looking for in the first place.
Good luck,
Alex.
Using this in a script. I've found that it does what I need it to:
#!/bin/bash
xterm -e "gedit; bash" &disown