Is there a way to read columns from a Parquet file as rows in a Spark RDD, materializing the full contents of each column as a list within an RDD tuple?
The idea is that for cases where I need to run a non-distributable, in-memory-only algorithm (processing a full column of data) on a set of executors, I would like to be able to parallelize the processing by shipping the full contents of each column to the executors. My initial implementation, which involved reading the Parquet file as a DataFrame, then converting it to RDD and transposing the rows via aggregateByKey, has turned out to be too expensive in terms of time (probably due to the extensive shuffling required).
If possible, I would prefer to use an existing implementation, rather than rolling my own implementations of ParquetInputFormat, ReadSupport, and/or RecordMaterializer.
Suggestions for alternative approaches are welcome as well.
Related
I have a case where i am trying to write some results using dataframe write into S3 using the below query with input_table_1 size is 13 Gb and input_table_2 as 1 Mb
input_table_1 has columns account, membership and
input_table_2 has columns role, id , membership_id, quantity, start_date
SELECT
/*+ BROADCASTJOIN(input_table_2) */
account,
role,
id,
quantity,
cast(start_date AS string) AS start_date
FROM
input_table_1
INNER JOIN
input_table_2
ON array_contains(input_table_1.membership, input_table_2.membership_id)
where membership array contains list of member_ids
This dataset write using Spark dataframe is generating around 1.1TiB of data in S3 with around 700 billion records.
We identified that there are duplicates and used dataframe.distinct.write.parquet("s3path") to remove the duplicates . The record count is reduced to almost 1/3rd of the previous total count with around 200 billion rows but we observed that the output size in S3 is now 17.2 TiB .
I am very confused how this can happen.
I have used the following spark conf settings
spark.sql.shuffle.partitions=20000
I have tried to do a coalesce and write to s3 but it did not work.
Please suggest if this is expected and when can be done ?
There's two sides to this:
1) Physical translation of distinct in Spark
The Spark catalyst optimiser turns a distinct operation into an aggregation by means of the ReplaceDeduplicateWithAggregate rule (Note: in the execution plan distinct is named Deduplicate).
This basically means df.distinct() on all columns is translated into a groupBy on all columns with an empty aggregation:
df.groupBy(df.columns:_*).agg(Map.empty).
Spark uses a HashPartitioner when shuffling data for a groupBy on respective columns. Since the groupBy clause in your case contains all columns (well, implicitly, but it does), you're more or less randomly shuffling data to different nodes in the cluster.
Increasing spark.sql.shuffle.partitions in this case is not going to help.
Now on to the 2nd side, why does this affect the size of your parquet files so much?
2) Compression in parquet files
Parquet is a columnar format, will say your data is organised in columns rather than row by row. This allows for powerful compression if data is adequately laid-out & ordered. E.g. if a column contains the same value for a number of consecutive rows, it is enough to write that value just once and make a note of the number of repetitions (a strategy called run length encoding). But Parquet also uses various other compression strategies.
Unfortunately, data ends up pretty randomly in your case after shuffling to remove duplicates. The original partitioning of input_table_1 was much better fitted.
Solutions
There's no single answer how to solve this, but here's a few pointers I'd suggest doing next:
What's causing the duplicates? Could these be removed upstream? Or is there a problem with the join condition causing duplicates?
A simple solution is to just repartition the dataset after distinct to match the partitioning of your input data. Adding a secondary sorting (sortWithinPartition) is likely going to give you even better compression. However, this comes at the cost of an additional shuffle!
As #matt-andruff pointed out below, you can also achieve this in SQL using cluster by. Obviously, that also requires you to move the distinct keyword into your SQL statement.
Write your own deduplication algorithm as Spark Aggregator and group / shuffle the data just once in a meaningful way.
I'm new to Pandas and Dask, Dask dataframes wrap pandas dataframes and share most of the same function calls.
I using Dask to sort(set_index) a largeish csv file ~1,000,000 rows ~100columns.
Once it's sorted I use itertuples() to grab each dataframe row, to compare with a row from a database with ~1,000,000 rows ~100 columns.
But it's running slowly (takes around 8 hours), is there a faster way to do this?
I used dask because it can sort very large csv files and has a flexible csv parsing engine. It'll also let me run more advanced operations on the dataset, and parse more data formats in the future
I could presort the csv but I want to see if Dask can be fast enough for my use case, it would make things alot more hands off in the long run.
By using iter_tuples, you are bringing each row back to the client, one by one. Please read up on map_partitions or map to see how you can apply function to rows or blocks of the dataframe without pulling data to the client.
Note that each worker should write to a different file, since they operate in parallel.
I am trying to remove duplicates in spark dataframes by using dropDuplicates() on couple of columns. But job is getting hung due to lots of shuffling involved and data skew. I have used 5 cores and 30GB of memory to do this. Data on which I am performing dropDuplicates() is about 12 million rows.
Please suggest me the most optimal way to remove duplicates in spark, considering data skew and shuffling involved.
Delete duplicate operations is an expensive operation as it compare values from one RDD to all other RDDs and tries to consolidate the results. Considering the size of your data results can time consuming.
I would recommend groupby transformation on the columns of your dataframe followed by commit action. This way only the consolidated results from your RDD will be compared with other RDD that too lazily and then you can request the result through any of the action like commit / show etc
transactions.groupBy("col1”,”col2").count.sort($"count".desc).show
distance():
df.select(['id', 'name']).distinct().show()
dropDuplicates()
df.dropDuplicates(['id', 'name']).show()
dropDuplicates() is the way to go if you want to drop duplicates over a subset of columns, but at the same time you want to keep all the columns of the original structure.
I had a question that is related to pyspark's repartitionBy() function which I originally posted in a comment on this question. I was asked to post it as a separate question, so here it is:
I understand that df.partitionBy(COL) will write all the rows with each value of COL to their own folder, and that each folder will (assuming the rows were previously distributed across all the partitions by some other key) have roughly the same number of files as were previously in the entire table. I find this behavior annoying. If I have a large table with 500 partitions, and I use partitionBy(COL) on some attribute columns, I now have for example 100 folders which each contain 500 (now very small) files.
What I would like is the partitionBy(COL) behavior, but with roughly the same file size and number of files as I had originally.
As demonstration, the previous question shares a toy example where you have a table with 10 partitions and do partitionBy(dayOfWeek) and now you have 70 files because there are 10 in each folder. I would want ~10 files, one for each day, and maybe 2 or 3 for days that have more data.
Can this be easily accomplished? Something like df.write().repartition(COL).partitionBy(COL) seems like it might work, but I worry that (in the case of a very large table which is about to be partitioned into many folders) having to first combine it to some small number of partitions before doing the partitionBy(COL) seems like a bad idea.
Any suggestions are greatly appreciated!
You've got several options. In my code below I'll assume you want to write in parquet, but of course you can change that.
(1) df.repartition(numPartitions, *cols).write.partitionBy(*cols).parquet(writePath)
This will first use hash-based partitioning to ensure that a limited number of values from COL make their way into each partition. Depending on the value you choose for numPartitions, some partitions may be empty while others may be crowded with values -- for anyone not sure why, read this. Then, when you call partitionBy on the DataFrameWriter, each unique value in each partition will be placed in its own individual file.
Warning: this approach can lead to lopsided partition sizes and lopsided task execution times. This happens when values in your column are associated with many rows (e.g., a city column -- the file for New York City might have lots of rows), whereas other values are less numerous (e.g., values for small towns).
(2) df.sort(sortCols).write.parquet(writePath)
This options works great when you want (1) the files you write to be of nearly equal sizes (2) exact control over the number of files written. This approach first globally sorts your data and then finds splits that break up the data into k evenly-sized partitions, where k is specified in the spark config spark.sql.shuffle.partitions. This means that all values with the same values of your sort key are adjacent to each other, but sometimes they'll span a split, and be in different files. This, if your use-case requires all rows with the same key to be in the same partition, then don't use this approach.
There are two extra bonuses: (1) by sorting your data its size on disk can often be reduced (e.g., sorting all events by user_id and then by time will lead to lots of repetition in column values, which aids compression) and (2) if you write to a file format the supports it (like Parquet) then subsequent readers can read data in optimally by using predicate push-down, because the parquet writer will write the MAX and MIN values of each column in the metadata, allowing the reader to skip rows if the query specifies values outside of the partition's (min, max) range.
Note that sorting in Spark is more expensive than just repartitioning and requires an extra stage. Behind the scenes Spark will first determine the splits in one stage, and then shuffle the data into those splits in another stage.
(3) df.rdd.partitionBy(customPartitioner).toDF().write.parquet(writePath)
If you're using spark on Scala, then you can write a customer partitioner, which can get over the annoying gotchas of the hash-based partitioner. Not an option in pySpark, unfortunately. If you really want to write a custom partitioner in pySpark, I've found this is possible, albeit a bit awkward, by using rdd.repartitionAndSortWithinPartitions:
df.rdd \
.keyBy(sort_key_function) \ # Convert to key-value pairs
.repartitionAndSortWithinPartitions(numPartitions=N_WRITE_PARTITIONS,
partitionFunc=part_func) \
.values() # get rid of keys \
.toDF().write.parquet(writePath)
Maybe someone else knows an easier way to use a custom partitioner on a dataframe in pyspark?
df.repartition(COL).write().partitionBy(COL)
will write out one file per partition. This will not work well if one of your partition contains a lot of data. e.g. if one partition contains 100GB of data, Spark will try to write out a 100GB file and your job will probably blow up.
df.repartition(2, COL).write().partitionBy(COL)
will write out a maximum of two files per partition, as described in this answer. This approach works well for datasets that are not very skewed (because the optimal number of files per partition is roughly the same for all partitions).
This answer explains how to write out more files for the partitions that have a lot of data and fewer files for the small partitions.
I have a table with hundreds of millions of rows, that I want to store in a dataframe in Spark and persist to disk as a parquet file.
The size of my Parquet file(s) is now in excess of 2TB and I want to make sure I have optimized this.
A large proportion of these columns are string values, that can be lengthy, but also often have very few values. For example I have a column with only two distinct values (a 20charcter and a 30 character string) and I have another column with a string that is on average 400characters long but only has about 400 distinct values across all entries.
In a relational database I would usually normalize those values out into a different table with references, or at least define my table with some sort of enum type.
I cannot see anything that matches that pattern in DF or parquet files. Is the columnar storage handling this efficiently? Or should I look into something to optimize this further?
Parquet doesn't have a mechanism for automatically generating enum-like types, but you can use the page dictionary. The page dictionary stores a list of values per parquet page to allow the rows to just reference back to the dictionary instead of rewriting the data. To enable the dictionary for the parquet writer in spark:
spark.conf.set("parquet.dictionary.enabled", "true")
spark.conf.set("parquet.dictionary.page.size", 2 * 1024 * 1024)
Note that you have to write the file with these options enabled, or it won't be used.
To enable filtering for existence using the dictionary, you can enable
spark.conf.set("parquet.filter.dictionary.enabled", "true")
Source: Parquet performance tuning:
The missing guide