I have an ubuntu server running with 2 node websites on it and I keep closing the terminals that start the app so I cannot shut the app down to make changes, I end up restarting the server.
How can I see what node instances are running and then stop them, or how do I stop a node instance through programming and I'll just make a button that kills the node instance. Either way...
If you dont want to use PM2 or systemd you can get the list of all the node.js instances running using
ps -aux | grep node
once you have the list of all nodejs processes you can kill any process using kill command
kill "Process ID goes here"
Use a process manager. PM2 is the most widely recommended.
npm install pm2#latest -g
then
pm2 start app.js
Alternatively you can use something like screen to have multiple terminal sessions running in one window
Related
I am running a Node.js server on a DigitalOcean droplet (with Ubuntu). I have worked out how to make it run when I'm not connected to it via Putty. However, just one issue: how do I stop it now?
I can see that control+C works when in the session, but what if I exit the session and come back? How will I stop the server then?
Also, will running it multiple times run multiple servers at once?
Thanks!
You really should be using a tool like supervisord (http://supervisord.org/) for your long-running processes.
But if you want to stop an already running process that you started with nohup then look up the process ID first (with ps aux and look/grep for your process) and then run kill <<pid>>.
I have my app running on http://talkwithstranger.com/ and I have deployed it on AWS EC2. I use this command
sudo nohup node index.js &
To continue running my Node JS server even if I close my terminal and exit my SSH.
However, after 2 days everytime I wake up and I find out that the node server itself stops automatically. I checked the running processes by using
ps -ef
and my node script is not there.
Google Chrome say site DNS not found, because NodeJS Express is not running of course to serve my html file, but why it stops itself?
What is causing this unexpected shutdown of my server after every 2 days? I have to manually run nohup again to run it again.
Does nohup has a time to expire or something ?
You should run node.js using a service / process manager. You can use something basic such as forever or supervisord but I would actually advise you to take a look at PM2.
It can do a lot of things - one of them being that it manages your process, makes sure it keeps running, restarts it when it fails, manages the logs, etc. You can also have it autostart when you restart the server.
It becomes really powerful in combination with https://pm2.io, because this enables you to monitor your server's metrics such as CPU and memory remotely and see whether exceptions happened, and much more (such as even remotely updating the software by pulling from git). However, they no longer offer a free plan unfortunately - their plans now start at $79/month, which is a pity. But don't worry, the PM2 application itself is still free and open source, only the monitoring costs money.
Basic usage of PM2:
npm install -g pm2
...to install PM2.
pm2 start my_script.js
Starts a script and lets it run in background.
pm2 status
Shows the status of any running scripts.
pm2 restart all
Restarts all running scripts.
pm2 kill
Stops all scripts and completely shuts down the PM2 daemon.
pm2 monit
Monitors CPU/RAM usage and shows it.
pm2 logs
Shows the last 20 output and error log lines and starts streaming live logs to the console. The logs are stored in the folder ~/.pm2/logs.
Using PM2, your script will not stop - at most, it will restart. And if it does you will be able to more easily understand why because you can easily access logs and watch what happenes with memory usage, etc.
Extra tips:
To avoid filling up the harddisk with logfiles, I recommend installing the module pm2-logrotate:
pm2 install pm2-logrotate
To automatically launch PM2 with the same script on startup when the server starts, you can first save the current configuration:
pm2 save
...and then use the following command to install a startup script - follow the instructions displayed, which will be different based on the exact OS you are using:
pm2 startup
To use PM2 in a more advanced way with multiple processes, custom environment variables, etc., take a look at ecosystem files.
You can try forever.Install using the following command.
npm install -g forever
Then just start forever:
forever start index.js
Another better option for production use is pm2.You can install pm2 with below command
npm install -g pm2
# or
yarn global add pm2
start server
pm2 start index.js
The best thing is you can achieve load balancing with pm2(utilize all available CPU)
pm2 start index.js -i max
For more info, you can visit pm2 documentation page.
I'm new to aws and recently I have been able to install node, mongod and also, FTPed project file to the server.
For mongodb,
I'm doing mongo in a separate terminal tab and starting service in another tab. I want to know how can I keep the mongo service running.
For node app,
Right now i'm doing node app in the server. How can I keep it alive too ?
Now the problem, is I open the browser with publicip:portno but nothing happens. How can I locate app and run it in the browser.
my app structure is
/
node
mongo
server.js and app related files
Using the Linux/Unix nohup command allows you to start commands that ignore the signals associated with the controlling terminal process terminating (SIGHUP). Adding the & to the command allows that command to run in the background and sending the output to /dev/null will ensure that your disk does not fill up with unnecessary log output. Here are some commands that should work:
nohup mongod >/dev/null &
node server.js >/dev/null &
This is more of a Linux/Unix command line issue I think. You can use the node module called forever to run your Node.js process in the background easily.
npm install -g forever
forever start YourScript.js
You can place an & at the end of the mongod command to place it in the background.
Ensure that in your node app you have the command app.listen("port number");
This is the "port number" that you should be using in your browser to render the page with the elastic IP from your AWS instance. Make sure that your elastic IP is configured to accept inbound requests.
To keep the service/app running in the background you can run the screen command then launch ur app/service (e.g. mongod OR node app.js). In the same terminal that your app is running press control + a + d, you should see
(detached)
printed on your screen.
This should keep your app/service running in the background.
Since node is basically a single process, when something goes terribly wrong, the whole application dies.
I now have a couple of apps built on express and I am using some manual methods to prevent extended downtimes ( process.on('uncaughtException') and a custom heartbeat monitor ).
Any suggestions from the community?
Best-practices? Frameworks?
Thanks!
A
Use something like forever
or use supervisor.
Just npm link and then sudo supervisor server.js.
These types of libraries also support hot reloading. There are some which you use from the command line and they run node services as sub processes for you. There are others which expect you to write your code to reload itself.
Ideally what you want to move towards a full blown load balancer which is failure safe. If a single node proccess in your load balancer crashes you want it to be quietly restarted and all the connections and data rescued.
Personally I would recommend supervisor for development (It's written by isaacs!) and a full blown load balancer (either nginx or node) for your real production server.
Of course your already running multiple node server processes in parallel because you care about scaling across multiple cores right ;)
Use forever.
"A simple CLI tool for ensuring that a given script runs continuously (i.e. forever)"
Just install it with npm
npm install forever
and type
forever start app.js
Try to look at forever module.
If you're using Ubuntu you can use upstart (which is installed by default).
$ cat /etc/init/my_app.conf
description "my_app"
author "me"
start on (local-filesystems and net-device-up IFACE=eth0) stop on
shutdown
respawn
exec sh -c "env NODE_ENV=production node /path/myapp/app.js >> /var/log/node.log 2>&1"
"respawn" mean that the app will be restarted if it dies.
To start the app
start my_app
For other commands
man initctl
I'll strongly recommend forever too. I used it yesterday and its a breeze:
Install npm install forever
Start your app forever start myapp.js
Check if its working forever list
Try killing your app :
ps
Get your myapp.js pid and run kill <pid
run forever list and you'll see it's running again
You can try using Fugue, a library for node.js similar to Spark or Unicorn:
https://github.com/pgte/fugue
Fugue can manage any node.js server type, not just web servers, and it's set up and configured as a node.js script, not a CLI command, so normal node.js build & deployment toolchains can use it.
I connect to my remote server via ssh. Then I start my node.js app with Forever. Everything works fine until I close my console window. How to run node.js app FOREVER on my remote server even when I close my connection via ssh? I just want to start an app and shut down my copmputer. My app should be working in the background on my remote server.
You may also want to consider using the upstart utility. It will allow you to start, stop and restart you node application like a service. Upstart can configured to automatically restart your application if it crashes.
Install upstart:
sudo apt-get install upstart
Create a simple script for your application that will look something like:
#!upstart
description "my app"
start on started mountall
stop on shutdown
# Automatically Respawn:
respawn
respawn limit 99 5
env NODE_ENV=production
exec node /somepath/myapp/app.js >> /var/log/myapp.log 2>&1
Then copy the script file (myapp.conf) to /etc/init and make sure its marked as executable. Your application can then be managed using the following commands:
sudo start myapp
sudo stop myapp
sudo restart myapp
Two answers: One for Windows, one for *nix:
On Windows, you can use the start command to start the process disconnected from your instance of cmd.exe:
start node example.js
On *nix, there are two aspects of this: Disconnecting the process from the console, and making sure it doesn't receive the HUP signal ("hang up"), which most processes (including Node) will respond to by terminating. The former is possibly optional, but the latter is necessary.
Starting disconnected from the console is easy: Usually, you just put an ampersand (&) at the end of the command line:
# Keep reading, don't just grab this and use it
node example.js &
But the above doesn't protect the process from HUP signals. The program may or may not receive HUP when you close the shell (console), depending on a shell option called huponexit. If huponexit is true, the process will receive HUP when the shell exits and will presumably terminate.
huponexit defaults to false on the various Linux variants I've used, and in fact I happily used the above for years until coderjoe and others helped me understand (in a very long comment stream under the answer that may have since been deleted) that I was relying on huponexit being false.
To avoid the possibility that huponexit might be true in your environment, explicitly use nohup. nohup runs the process immune from HUP signals. You use it like this:
nohup node example.js > /dev/null &
or
nohup node example.js > your-desired-filename-or-stream-here &
The redirection is important; if you don't do it, you'll end up with a nohup.out file containing the output from stdout and stderr. (By default, nohup redirects stderr to stdout, and if stdout is outputting to a terminal, it redirects that to nohup.out. nohup also redirects stdin if it's receiving from a terminal, so we don't have to do that. See man nohup or info coreutils 'nohup invocation' for details.)
In general for these things, you want to use a process monitor so that if the process crashes for some reason, the monitor restarts it, but the above does work for simple cases.
I would definitely recommend pm2
npm install -g pm2
To start server: pm2 start [yourServerFile.js]
To stop server: pm2 stop [yourServerFile.js]
Close client and server will run forever....will also restart if app crashes.
Ive been running a node server on Ubuntu for months with zero issues
Always, simple is the best, no need upstart, no need forever, just nohup:
nohup node file.js &
Believe me, I'm running so that for my case!
You could install forever using npm like this:
sudo npm install -g forever
Or as a service:
forever start server.js
Or stop service
forever stop server.js
To list all running processes:
forever list
node expamle.js & for example
In Linux, SSH into your remote server and run
screen
to launch into a new screen.
Finally, type ctrlad to detach the screen session without killing the process.
More info here.
I had similar issue and I think using forever will help to handle crashed and restarts
You can install forever globally:
sudo nom install -g forever
And run this command:
nohup forever server.js &
This should handle all the trouble of closing the terminal, closing ssh session, node crashes and restarts.
If you're running node.js in a production environment, you should consider using PM2, forever.js, or Nodemon.
There is no shortage of articles online comparing the different packages.
This is only a partial answer for Windows. I’ve created a single line Visual Basic Script called app.vbs that will start your node application within a hidden window:
CreateObject("Wscript.Shell").Run "node app.js", 0
To execute it automatically at startup, open the %AppData%\Microsoft\Windows\Start Menu\Programs\Startup\ directory and add a shortcut to the app.vbs file.
More info at: https://keestalkstech.com/2016/07/start-nodejs-app-windowless-windows/
Wow, I just found a very simple solution:
First, start your process (node app)
forever dist/index.js
run: ^Z cmd + z.
Then: bg. Yeah.. bg (background).
And pum.. you are out.
Finish with exitif you are with sshor just close the terminal.
my start.sh file:
#/bin/bash
nohup forever -c php artisan your:command >>storage/logs/yourcommand.log 2>&1 &
There is one important thing only. FIRST COMMAND MUST BE "nohup", second command must be "forever" and "-c" parameter is forever's param, "2>&1 &" area is for "nohup". After running this line then you can logout from your terminal, relogin and run "forever restartall" voilaa... You can restart and you can be sure that if script halts then forever will restart it.
I <3 forever