I have a property file say mypropety.properties where i have set multiple key value pairs.
I load properties to the current session running $. myproperty.properties command.
Now when I run script using $. myscript.sh it loads all variable values from session and works fine. However in my use case I need to run the command using sh myscript.sh command and when I run it this way it doesn't replace variable values in the script and fails.
Any idea how to do variable substitution when running a script with sh command?
Bash looks for the variable BASH_ENV in the environment and if present expands and reads the file.
sh -c "BASH_ENV=myproperty.properties myscript.sh"
Related
How to set a global environment variable in a bash script?
If I do stuff like
#!/bin/bash
FOO=bar
...or
#!/bin/bash
export FOO=bar
...the vars seem to stay in the local context, whereas I'd like to keep using them after the script has finished executing.
Run your script with .
. myscript.sh
This will run the script in the current shell environment.
export governs which variables will be available to new processes, so if you say
FOO=1
export BAR=2
./runScript.sh
then $BAR will be available in the environment of runScript.sh, but $FOO will not.
When you run a shell script, it's done in a sub-shell so it cannot affect the parent shell's environment. You want to source the script by doing:
. ./setfoo.sh
This executes it in the context of the current shell, not as a sub shell.
From the bash man page:
. filename [arguments]
source filename [arguments]
Read and execute commands from filename in the current shell
environment and return the exit status of the last command executed
from filename.
If filename does not contain a slash, file names in PATH are used to
find the directory containing filename.
The file searched for in PATH need not be executable. When bash is not
in POSIX mode, the current directory is searched if no file is found
in PATH.
If the sourcepath option to the shopt builtin command is turned off,
the PATH is not searched.
If any arguments are supplied, they become the positional parameters
when filename is executed.
Otherwise the positional parameters are unchanged. The return status
is the status of the last command exited within the script (0 if no
commands are executed), and false if filename is not found or cannot
be read.
source myscript.sh is also feasible.
Description for linux command source:
source is a Unix command that evaluates the file following the command,
as a list of commands, executed in the current context
#!/bin/bash
export FOO=bar
or
#!/bin/bash
FOO=bar
export FOO
man export:
The shell shall give the export attribute to the variables corresponding to the specified names, which shall cause them to be in the environment of subsequently executed commands. If the name of a variable is followed by = word, then the value of that variable shall be set to word.
A common design is to have your script output a result, and require the cooperation of the caller. Then you can say, for example,
eval "$(yourscript)"
or perhaps less dangerously
cd "$(yourscript)"
This extends to tools in other languages besides shell script.
In your shell script, write the variables to another file like below and source these files in your ~/.bashrc or ~/.zshrc
echo "export FOO=bar" >> environment.sh
In your ~/.bashrc or ~/.zshrc, source it like below:
source Path-to-file/environment.sh
You can then access it globally.
FOO=bar
export FOO
I am trying to create three BASH scripts to help organize my terminals and workspace on my VM.
Below are the commands that I wish to have parameterized.
1) How to rename the title of a terminal window:
PS1='\[\e]0;TERMINAL NAME\a\]${debian_chroot:+($debian_chroot)}\u#\h:\w\$ '
2) To change the number of workspaces:
gsettings set org.gnome.desktop.wm.preferences num-workspaces "5"
3) To rename the name of Workspaces:
gsettings set org.gnome.desktop.wm.preferences workspace-names "['IntelliJ', 'Cloud Discovery', 'Full Stack', 'Simulators', 'Misc']"
It's been a little while since I have done BASH scripting and I am forgetting how to run a console command via a BASH script.
My initial attempts have all failed. Here is the code that I am written most recently:
#!/bin/bash
export cmd="PS1='\[\e]0;$1\a\]${debian_chroot:+($debian_chroot)}\u#\h:\w\$ '"
echo {$cmd}
./setNewTermName MyName
But when I run the script as above, it is not renaming the terminal. However, when I run the PS1 command above directly on the command like (substituting in the actual name), it works.
Any ideas on what I am doing wrong?
You need to define a local variable that will get the value of the title as an argument as under. Then you will use that local variable (title in this case) in your PS1 variable.
Then, in order to run the script, you need to "source" the script in the current shell so that the variable in the script are visible to the parent shell.
#!/bin/bash
title=$1;
PS1='\[\e]0;${title}\a\]${debian_chroot:+($debian_chroot)}\u#\h:\w\$ '
So, instead of running the script as
./setNewTermName MyName
Run without the / as under. Notice the space after the period:
. setNewTermName MyName
Or as:
source setNewTermName MyName
csh:
set a=0
echo "a is $a"
when i do ./my_script.csh output is:
a is
when i do source my_script.csh output is:
a is 0
Why is it so . As i know that ./ execution uses new shell.
That's right, ./my_script.csh starts a new shell, and uses the #! that you should have at the top of the file to select which shell to run (which should be csh in this case).
source my_script.csh runs the script in the current shell.
If the script is incorrectly run in, for example, the bash shell, set a=0 is not the syntax for setting an environment variable in bash, so the code won't work as you expected, because you're using the wrong shell.
Take a look at the #! at the top of the file. Is it correct?
check if variable "a" is set in your current shell:
set | grep '^a='
Remember that once you source script to your current shell,
all it's global variables are there until unset or you exit the current shell.
You may want to start a new shell, source the script, end exit shell to perform valid tests.
I don't know the context of your problem, but you may want to export some key variables to have their copies in every subprocess.
I need to increment an environmental variable by these steps:
envar=1
export envar
sh script_incrementation
echo $envar
where script_incrementation contains something like this:
#! /bin/sh
envar=$[envar+1] #I've tried also other methods of incrementation
export envar
Whatever I do, after exiting the script the variable remains with its initial value 1.
THanks for your time.
A shell script executes in its own shell, so you cannot affect the outer shell unless you source it. See this question for details of that discussion.
Consider the following script, which I will call Foo.sh.
#!/bin/bash
export HELLO=$(($HELLO+1))
Suppose in the outer shell, I define an environmental variable:
export HELLO=1
If I run the script like this, it run inside its own shell and will not affect the parent.
./Foo.sh
However, if I source it, it will just execute the commands in the current shell, and will achieve the desired affect.
. Foo.sh
echo $HELLO # prints 2
Your script can not change the environment of the calling process (shell), it merely inherits it.
So, if you export foo=bar, and then invoke sh (a new process) with your script, the script will see the value of $foo (which is "bar"), and it will be able to change its own copy of it – but that is not going to affect the environment of the parent process (where you exported the variable).
You can simply source your script in the original shell, i.e. run
source increment_script.sh
or
. increment_script.sh
and that will then change the value of the variable.
This is because sourceing a script avoids spawning a new shell (process).
Another trick is to have your script output the changed environment, and then eval that output, for example:
counter=$[counter+1]
echo "counter=$counter"
and then run that as
eval `increment_script.sh`
I was wondering if there is a way to source a csh script from a sh script. Below is an example of what is trying to be implemented:
script1.sh:
#!/bin/sh
source script2
script2:
#!/bin/csh -f
setenv TEST 1234
set path = /home/user/sandbox
When I run sh script1.sh, I get syntax errors generated from script2 (expected since we are using a different Shebang). Is there a way I can run script2 through script1?
Instead of source script2 run it as:
csh -f script2
Since your use case depends on retaining environment variables set by the csh script, try adding this to the beginning of script1:
#!/bin/sh
if [ "$csh_executed" -ne 1 ]; then
csh_executed=1 exec csh -c "source script2;
exec /bin/sh \"$0\" \"\$argv\"" "$#"
fi
# rest of script1
If the csh_executed variable is not set to 1 in the environment, run a csh script that sources script2 then executes an instance of sh, which will retain the changes to the environment made in script2. exec is used to avoid creating new processes for each shell instance, instead just "switching" from one shell to the next. Setting csh_executed in the environment of the csh command ensures that we don't get stuck in a loop when script1 is re-executed by the csh instance.
Unfortunately, there is one drawback that I don't think can be fixed, at least not with my limited knowledge of csh: the second invocation of script1 receives all the original arguments as a single string, rather than a sequence of distinct arguments.
You don't want source there; it runs the given script inside your existing shell, without spawning a subprocess. Obviously, your sh process can't run something like that which isn't a sh script.
Just call the script directly, assuming it is executable:
script2
The closest you can come to sourcing a script with a different executor than your original script is to use exec. exec will replace the running process space with the new process. Unlike source, however, when your exec-ed program ends, the entire process ends. So you can do this:
#!/bin/sh
exec /path/to/csh/script
but you can't do this:
#!/bin/sh
exec /path/to/csh/script
some-other-command
However, are you sure you really want to source the script? Maybe you just want to run it in a subprocess:
#!/bin/sh
csh -f /path/to/csh/script
some-other-command
You want the settings in your csh script to apply to the sh script that invokes it.
Basically, you can't do that, though there are some (rather ugly) ways you could make it work. If you execute your csh script, it will set those variables in the context of the process running the script; they'll vanish as soon as it returns to the caller.
Your best bet is simply to write a new version of your csh script as an sh script, and source or . it from the calling sh script.
You could translate your csh script:
#!/bin/csh -f
setenv TEST 1234
set path = /home/user/sandbox
to this:
export TEST=1234
export PATH=/home/user/sandbox
(csh treats the shell array variable $path specially, tying it to the environment variable $PATH. sh and its derivatives don't do that, they deal with $PATH itself directly.)
Note that a script intended to be sourced should not have a #! line at the top, since it doesn't make sense to execute it in its own process; you need to execute its contents in the context of the caller.
If maintaining two copies of the script, one to be sourced from csh or tcsh scripts and another to be sourced or .ed from sh/ksh/bash/zsh script, is not practical, there are other solutions. For example, your script can print a series of sh commands to be executed; you can then do something like
eval `./foo.csh`
(line endings will pose some issues here).
Or you can modify the csh script so it sets the required environment variables and then invokes some specified command, which could be a new interactive shell; this is inconvenient, since it doesn't set those variables in the interactive shell you're running.
If a software package requires some special environment variables to be set, it's common practice to provide scripts called, for example, setup.sh and setup.csh, so that sh/ksh/bash/zsh users can do:
. /path/to/package/setup.sh
and csh/tcsh users can do:
source /path/to/package/setup.csh
Incidentally, this command:
set path = /home/user/sandbox
in your sample script is probably not a good idea. It replaces your entire $PATH with just a single directory, which means you won't be able to execute simple commands like ls unless you specify their full paths. You'd usually want something like:
set path = ( $path /home/user/sandbox )
or, in sh:
PATH=$PATH:/home/user/sandbox