I have some data in an excel file.
At first, I read the file and create a list of names stored in a cell through this command:
[status,sheets] = xlsfinfo(filename);
and I get:
sheets = {'A1','A2','B1','B2','C1'};
(these are the names of excelsheets in the excel file)
and through some process I obtain a matrix for each of these names (excelsheets). The final matrix for each is called:
completeData = [x,v,z,y,s];
Now, I want to:
change the name of "completeData" variable to each of its corresponding excelsheet (from the "sheets" cell).
then save this newly renamed variable (the old "completeData") with the name of its corresponding excelsheet (again from the "sheets" cell).
So far, I have only managed to save each completeData matrix resulting for each excel sheet separately with the name of the sheets [which is point number 2] through this command:
save(sprintf('%s',sheets{excelSheet}),'completeData');
(here I have a loop over "excelsheet")
The problem is that when I have mange excel sheets, and save all of them in a folder my hard disk, whenever I run any of these saved variables I get "completeData" in the workspace which is not what I want. I want to get also the name of the excelsheet.
How can I do this?
P.S. through this command:
eval(sprintf([sheets{excelsheet} '=completeData;']));
(again another loop over excelsheet)
I have managed to create several matrices with the names of excel sheets. But I do not know how I can save these very good newly created variables through a loop so that I do not do it one by one.
Following up the comments above, I tried to write you a simplified example:
%% Initialise
names = {'name1', 'name2', 'name3'};
data = randn(10, 3);
%% it create three fields called name1, name2 and name3 from data, in s
for ind=1:size(data, 2)
s.(names{ind}) = data(:, ind);
end
Hope it helps!
So this is how it worked:
First read information:
[status,sheets] = xlsfinfo(filename);
NamesList = sheets(:,1);
Now, apply the primarily collected information to read again with details:
for ind = 1:length(NamesList)
% Only read those particular sheets
[num,txt,raw] = xlsread(filename,NamesList{ind,:});
var.(NamesList{ind})={txt(:,MyColumn),num};
clear num txt raw
end
Related
UPDATE!
My goal is to modify an existing Workbook ( example - master_v2.xlsm ) and produce a new workbook (Newclient4) based on the updates made to master_v2.
I'm using a single sheet within master_v2 to collect all the data which will be determining what the new workbook will be.
Currently using multiple if statements to find the value of the cells in this "repository" sheet. Based on specific cells, I'm creating and adding values to copies of an existing sheet called "PANDAS".
My goal right now is to create a dict based on two columns. The loop through
the keys so that every time I get a hit on a cell, I will gather values from specific keys.
That's listed below:
from openpyxl import load_workbook
# Start by opening the spreadsheet and selecting the main sheet
workbook = load_workbook(filename="master_v2.xlsm",read_only=False, keep_vba=True)
DATASOURCE = workbook['repository']
DATASOURCE["A:H"]
cell100 = DATASOURCE["F6"].value
CREATION = cell100
cell101 = DATASOURCE["F135"].value
CREATION2 = cell101
cell107 = DATASOURCE["F780"].value
CREATION7 = cell107
if CREATION.isnumeric():
source = workbook['PANDAS']
target = workbook.copy_worksheet(source)
ss_sheet = target
ss_sheet.title = DATASOURCE['H4'].value[0:12]+' PANDAS'
if CREATION2.isnumeric():
source = workbook['PANDAS']
target = workbook.copy_worksheet(source)
ss_sheet = target
ss_sheet.title = DATASOURCE['H133'].value[0:12]+' PANDAS'
if CREATION3.isnumeric():
source = workbook['PANDAS']
target = workbook.copy_worksheet(source)
ss_sheet = target
ss_sheet.title = DATASOURCE['H262'].value[0:12]+' PANDAS'
else:
print ("no")
workbook.save(filename="NewClient4.xlsm")
Instead of the many if statements I was hoping to be able to loop through the column as explained above,
once I found my value, gather data and copy it over to a copy of sheet which is then filled out by other cells. Each time the loop comples, I want to do repeat on the next match of the string.. but I'm only this far and it's not quite working.
Anyone have a way to get this working?
( trying to replace the many one to one mappings and if statements )
for i in range(1,3000):
if DATASOURCE.cell(row=i,column=5).value == "Customer:":
source = workbook['Design details']
target = workbook.copy_worksheet(source)
ss_sheet = target
ss_sheet.title = DATASOURCE['H4'].value[0:12]+' Design details'
else:
print ("no")
Thank you guys in advanced
I would like to do a data reduction operation on a spreadsheet. Preferably I would like to use MATLAB/(or excel) since I need separate output files for each case.
The link is for the spreadsheet is below
Spreadsheet
A screenshot of the spreadsheet is as below
The output I required in text files is something as below
The first sheet in the .xls file is the main input. Wheras the the following sheets (d**) are my required output. I also need these sheets in a separate ASCII file (.dat) to plot hem later on. Here is how the algorithm works
Lookup the number/string in column B(FileName)
Extract all data in Columns C and D (Saturation and ETC) with same FileName Value(Column B)
Lookup the matching FileName(Column B) value in Column E (ImageIndex).
Copy Value of ImageName(Column F) to the corresponding Value in Image(IndexColumn E)
Result would be three columns (ImageName,Saturation,ETC). ImageName would be same for each subcase
Sort the columns based on Saturation
Write each sub case as a separate .dat file
I tried using a few recipes using categorical arrays (findgroups and splitapply) in MATLAB. Didn't seem to work out for me. I would be later working on a larger data set so automation is necessary. I think this could be done using macros on excel, but I would prefer using MATLAB since I would use MATLAB to plot the data. Any other alternative suggestions are welcome
Thanks,
Here's a Matlab solution. You could do it with a rather convoluted accumarray call, but readability would be rather bad, so I'm opting for a loop here.
out is a structure which you can use to either write files, or to plot the data.
tbl = readtable('yourFile.xls');
%# get the group indices for the files
%# this assumes that you have cleaned up the dash after the 1
%# so that all of the entries in the FileName column are numeric
idx = tbl.FileName;
%# the uIdx business is to account for the possibility
%# that there are images missing from the sequence
uIdx = unique(idx);
nImages = length(uIdx);
%# preassign output structure
out(1:nImages) = struct('name','','saturation',0,'etc',0);
%# loop to extract relevant information
for iImage = uIdx(:)'
myIdx = idx==iImage;
data = tbl(myIdx,{'Saturation','ETC'});
data = sortrows(data,'Saturation');
name = tbl.ImageName{tbl.ImageIdx==iImage};
out(iImage==uIdx).name = name;
out(iImage==uIdx).saturation = data.Saturation;
out(iImage==uIdx).etc= data.ETC;
end
%# plotting
for iImage = 1:nImages
figure('name',out(iImage).name)
plot(out(iImage).saturation, out(iImage).etc,'.');
end
I need to import some Excel files in MATLAB and work on them. My problem is that each Excel file has 15 sheets and I don't know how to "number" each sheet so that I can make a loop or something similar (because I need to find the average on a certain column on each sheet).
I have already tried importing the data and building a loop but MATLAB registers the sheets as chars.
Use xlsinfo to get the sheet names, then use xlsread in a loop.
[status,sheets,xlFormat] = xlsfinfo(filename);
for sheetindex=1:numel(sheets)
[num,txt,raw]=xlsread(filename,sheets{sheetindex});
data{sheetindex}=num; %keep for example the numeric data to process it later outside the loop.
end
I 've just remembered that i posted this question almost 2 years ago, and since I figured it out, I thought that posting the answer could prove useful to someone in the future.
So to recap; I needed to import a single column from 4 excel files, with each file containing 15 worksheets. The columns were of variable lengths. I figured out two ways to do this. The first one is by using the xlsread function with the following syntax.
for count_p = 1:2
a = sprintf('control_group_%d.xls',count_p);
[status,sheets,xlFormat] = xlsfinfo(a);
for sheetindex=1:numel(sheets)
[num,txt,raw]=xlsread(a,sheets{sheetindex},'','basic');
data{sheetindex}=num;
FifthCol{count_p,sheetindex} = (data{sheetindex}(:,5));
end
end
for count_p = 3:4
a = sprintf('exercise_group_%d.xls',(count_p-2));
[status,sheets,xlFormat] = xlsfinfo(a);
for sheetindex=1:numel(sheets)
[num,txt,raw]=xlsread(a,sheets{sheetindex},'','basic');
data{sheetindex}=num;
FifthCol{count_p,sheetindex} = (data{sheetindex}(:,5));
end
end
The files where obviously named control_group_1, control_group_2 etc. I used the 'basic' input in xlsread, because I only needed the raw data from the files, and it proved to be much faster than using the full functionality of the function.
The second way to import the data, and the one that i ended up using, is building your own activeX server and running a single excelapplication on it. Xlsread "opens" and "closes" an activeX server each time it's called so it's rather time consuming (using the 'basic' input does not though). The code i used is the following.
Folder=cd(pwd); %getting the working directory
d = dir('*.xls'); %finding the xls files
N_File=numel(d); % Number of files
hexcel = actxserver ('Excel.Application'); %starting the activeX server
%and running an Excel
%Application on it
hexcel.DisplayAlerts = true;
for index = 1:N_File %Looping through the workbooks(xls files)
Wrkbk = hexcel.Workbooks.Open(fullfile(pwd, d(index).name)); %VBA
%functions
WorkName = Wrkbk.Name; %getting the workbook name %&commands
display(WorkName)
Sheets=Wrkbk.Sheets; %sheets handle
ShCo(index)=Wrkbk.Sheets.Count; %counting them for use in the next loop
for j = 1:ShCo(index) %looping through each sheet
itemm = hexcel.Sheets.Item(sprintf('sheet%d',j)); %VBA commands
itemm.Activate;
robj = itemm.Columns.End(4); %getting the column i needed
numrows = robj.row; %counting to the end of the column
dat_range = ['E1:E' num2str(numrows)]; %data range
rngObj = hexcel.Range(dat_range);
xldat{index, j} = cell2mat(rngObj.Value); %getting the data in a cell
end;
end
%invoke(hexcel);
Quit(hexcel);
delete(hexcel);
I would like to write multiple tables in a matlab for loop. As an input i use a excel file that contains multiple sheets. Yhe amount of sheets and the size of the data is not prefixed. The reading of this files goes right but once i save it to a table it overwrites the same table over and over again.
The clue would be a flexible name in the cell2table function. I have these names in sheetname (all) and Sheet (current). Does anyone has a suggestion?
[type,sheetname] = xlsfinfo('\Matlab\dienstregeling.xlsx');
m=size(sheetname,2);
for(i=1:m);
Sheet = char(sheetname(1,i));
[num, text, raw] = xlsread('\Matlab\dienstregeling.xlsx',Sheet);
test = cell2table(raw);
end
You could use a structure and generate the field names from the variable Sheet:
test = struct;
for(i=1:m);
Sheet = char(sheetname(1,i));
[num, text, raw] = xlsread('\Matlab\dienstregeling.xlsx',Sheet);
test.(Sheet) = cell2table(raw);
end
I have an excel spreadsheet with lots of data that I want to import into matlab.
filename = 'for_matlab.xlsx';
sheet = (13*2)+ 1;
xlRange = 'A1:G6';
all_data = {'one_a', 'one_b', 'two_a', 'two_b', 'three_a', 'three_b', 'four_a', 'four_b', 'five_a', 'five_b', 'six_a', 'six_b', 'seven_a', 'seven_b', 'eight_a', 'eight_b', 'nine_a', 'nine_b', 'ten_a', 'ten_b', 'eleven_a', 'eleven_b', 'twelve_a', 'twelve_b', 'thirteen_a', 'thirteen_b', 'fourteen_a'};
%read data from excel spreadsheet
for i=1:sheet,
all_data{i} = xlsread(filename, sheet, xlRange);
end
Each element of the 'all_data' vector has a corresponding matrix in separate excel sheet. The code above imports the last matrix only into all of the variables. Could somebody tell me how to get it so I can import these matrices into individual matlab variables (without calling the xlsread function 28 times)?
You define a loop using i but then put sheet in the actual xlsread call, which will just make it read repeatedly from the same sheet (the value of the variable sheet is not changing). Also not sure whether you intend to somehow save the contents of all_data, as written there's no point in defining it that way as it will just be overwritten.
There are two ways of specifying the sheet using xlsread.
1) Using a number. If you intended this then:
all_data{i} = xlsread(filename, i, xlRange);
2) Using the name of the sheet. If you intended this and the contents of all_data are the names of sheets, then:
data{i} = xlsread(filename, all_data{i}, xlRange); %avoiding overwriting