Single Use List - Excel - excel

I'm after a way of preferably using VLookup to return information and once returned, have the source information unavailable for the same lookup.
e.g. If I have a list of names I have not used in seating for an event, I will want a formula which can look up this information WITHOUT entering the same name more than once. I'd rather not do a drop-down option as requires selecting the entry and I want my whole table to be an self-filling database.
I've about 20 nested IF functions going on in one cell so ideally something that could fit in there easily? Ill take anything honestly :P
Thanks in advance

Related

How do one extract information from a dynamic table, automatically through excel functions?

I have been searching high and low for a way to solve my dilemma, in different ways, so I am trying to post both of the things I've been trying to do:
The challenge version 1:
I want to extract the entire row with information tied to the name which is the latest entry of that name in the table. So from the table below I would want to collect the entire row which contains the information: "A, Jack Black, 01.01.2029, 10:20". I simply want to copy the entire row to another sheet. But one important factor is that it has to happen automatically.
So i need functions which can check if: Is there another entry with the same name, higher up in the table? If so, DO NOT COPY THE ROW. If there ain't another entry with the exact same name higher up in the table, COPY THE ENTIRE ROW, to another table, within another sheet.
The challenge version 2:
What I really want to do is count the number of unique people(unique names) per. department, and summarize this in another table. Basically this means that "Jack Black" should be counted as 1 person, in department A.
So the result I want, is a table looking like this (the one beneath), where the number of people does not contain any duplicate people (names). OR it does not function with a dynamic table, which updates the information it contains on the fly. I can make this happen if I am copying from a static table, but as stated above, the table is dynamic and updates with new information every minute...
So far i've tried excel's built in filtering, but this does not work automatically. I've also tried using functions like in this guide: https://excel-bytes.com/how-to-extract-a-dynamic-list-from-a-data-range-based-on-a-criteria-without-filters-in-excel/. However every solution i find seems to need criteria for filtering out duplicates or does not function when copying information from a dynamic table.
Does anyone know how to reach my desired result, without implementing criteria for selecting the rows or counting rows as stated above? VBA code is not an option at the moment :(
In advance, THANK YOU, I've really tried solving this, but I feel like this just might break my head wide open soon if I can't solve it. HEEEEELP!
Sincerely
haakonlu

Taking means of irregular amounts data

I'm not able to take the means for a large dataset given that the amount of attributes is irregular.
I have posted a simplified case for the problem. It explains the problem very well.
An idea that I came up with: Make a filter to condition on a single attribute. However, still, I don't see a way to do this in an efficient way (other then doing it all by hand).
see excel file:
All help is much appreciated.
I'm basically looking for a function/method to achieve taking means of all different attributes conditioned on each person for a large dataset without doing it by hand.
You can use AVERAGEIFS() inside an IF:
=IF(OR(A2<>A1,B2<>B1),AVERAGEIFS(C:C,A:A,A2,B:B,B2),"")
the ifrst part of the if tests whether the row starts a new group either by the person or the attribute changing. Then it uses AVERAGEIFS() to return the correct average of that group. otherwise it returns a blank
What you want to do can be accomplished very simply with a pivot table.
Simply select one of the cells inside the range of data you want to process(See the video for general use of a pivot table https://www.youtube.com/watch?v=iCiayB6GrpQ )
go the insert tab and insert pivot table.
Once you have it, simply check people, attribute, and values. Then drag people and attribute into rows, drag valut into the values window, select the drop down list and change it from sum of value to average and you should be done. https://i.stack.imgur.com/nYEzw.png

Excel: Returning values from a range that haven't already been specified

I have a dataset in long format with a unique ID representing people at different points in time. I already have a list of ID's with the first code, but would like to add a column for the second and third code, if available.
An example of the data, with what the output should look like at the bottom
I already have the first two columns in this example. I was thinking I would specify that I want to look at the values that are not the first code, and output a different code in the range if available, otherwise it returns blank. I also want to be able to use the command with few modifications in a third cell for a third code, again as long as it exists.
Ideally this can all be done without the use of vba, however if that would be easier, then by all means go ahead. Any solution not necessarily following my logic map are appreciated as well. Thanks in advance for the help!

Fix the structure of the SSRS Matrix

I have been working on a small project. I am trying to display all the results in the same row without NULL values. I've written a small expression to remove the Null values already "=IIF(IsNothing(Fields!RegisterNo.Value),True,False)". However, the rows seem to be moving one level down as it is displayed in the picture ResultMatrix1. I want the results to be on the same level. Can you please tell me if this is possible and how I can achieve it. Is it something to do with the groupings or something else?
Design Groupings
By default, when you create a table, there is a Row Group called "Details" that is not actually grouped by anything. This causes it to produce one row for each row from the dataset. Since you are trying to group these, you need to make sure that innermost group is grouped by your Staff Ref No.
In the lower-right cell, you may need to change the expression to use a Max function. This will simply avoid arbitrarily showing blanks when they happen to be sorted before a real value within that group.

Excel Lookup with multiple queries

I have a question that I a may not be thinking correctly about. But I have an a long excel file that I pull from somewhere else with the following columns:
Project_Name1, Employee_Name1, Date_Worked1, Hours_Worked1
In another sheet I have these columns
Project_Name2, Employee_Name2, Begin_Date2, End_Date2, Hours_Worked2
This second sheet is filled with data, and works just fine.
However, it turns out that I have some employee names that I do not know that are also working on the same project. I need to figure out the names of the employees and then sum the number of hours they worked for a given period.
So I need a lookup with three criteria:
Project_Name1 = Project_Name2
Employee_Name1 <> {Array of Employee_Name2}
Begin_Date2 <= Date_Worked1 > End_Date2
Returning Employee name.
Once I have the employee name, I can do a sumifs=() and get the total hours they worked no problem.
I have tried a number of combinations of Index Match functions, using ctrl-shift-enter... and have not been able to figure out it. Any help would be greatly appreciated.
What you're talking about doing is extremely complicated and a little bit past what Excel was designed to do by default. However, there are a few workarounds that you can use to attempt to get the information that you're looking for.
It's possible to do multiple-criteria VLOOKUPs and SUMIFs by concatenating fields to make a multi-part identifier (Ex: Insert a new column and have a forumla in it like =A1&B1)
Open a new workbook and use Microsoft Query (I'm not sure if you can select from more than one sheet, but if you can select from multiple sheets like tables you should be able to write a semi-complex query to pull the dataset you want.
http://office.microsoft.com/en-us/excel-help/use-microsoft-query-to-retrieve-external-data-HA010099664.aspx
Use the embedded macro feature and use visual basic script to write out your business logic. (Hotkey is ALT+F11)
One way to do this would be to first create an additional column to the right of entries on the sheet you're trying to pull employee_name from: =ROW()
You could then use an array formula like you were trying to implement to pull the corresponding 'match' row:
{=SUM((project_name1=projectname2)*(employeename1<>employeename2)*(begindate<=date_worked1)*(date_worked1>end_date2)*(match_column))}
You could then use this returned match_column entry within the index as you described to retrieve the appropriate entries.

Resources