I am using cascaded filters in my reports and I have my expression like below -
if ([Region] = "${whichRegion}",[State],null)
along with the above expression, I would like to preselect one of the values of [state] column.
i would need some thing like this -
if ([Region] = "${whichRegion}",[State],null)
or
[State] = 'some default value'
I know above expression throws error.
Could you please let me know how the above expression can be modified ?
Just place your default state value in your false clause.
if([Region] = "${whichRegion}",[State],"DefaultStateValue")
BTW, where are you using this expression at?
Related
I have a pipeline parameter fed by a config file in SQL.
Sometimes that parameter will be empty, not NULL but just empty ('').
How do I write an expression that will evaluate the parameter to TRUE/FALSE(blank/not blank) that I can put into my IF activity?
Basic question but thanks a lot.
I tried
#pipeline().parameters.x = ''
but it just told me Parameter x = '' was not found .......
You can use the below expression in the if activity to evaluate a parameter is empty or not.
#empty(pipeline().parameters.ok)
Sample demonstration:
A sample parameter ok.
For example, purpose I have created a string variable which I will use inside if to check the output.
In if give the above expression.
Inside True activities I have given a set variable activity and gave some value and did the same inside false activities.
Output when the parameter value is not given(empty).
Output when we gave any value to the parameter
How do we write conditions in arango, that includes for loops. I can elaborate the requirement below.
My requirement is if a particular attribute(array type) exists in the arango collection, i would read data from the collection(that requires a loop) or else, might do the following :
return null
return empty string ""
do nothing.
Is this possible to achieve in arango?
The helping methods could be -->
-- has(collectionname, attributename)
-- The ternary operator ?:
let attribute1 = has(doc,"attribute1") ?(
for name in doc.attribute1.names
filter name.language == "xyz"
return name.name
) : ""
But this dosent work. Seems like arango compiler first attempts to compile the for loop, finds nulls and reports error as below. Instead, it should have compiled "has" function first for the ternary operator being used.
collection or array expected as operand to FOR loop; you provided a value of type 'null' (while executing)
If there is a better way of doing it, would appreciate the advice!!
Thanks in advance!
Nilotpal
Fakhrany here from ArangoDB.
Regarding your question, this is a known limitation.
From https://www.arangodb.com/docs/3.8/aql/fundamentals-limitations.html:
The following other limitations are known for AQL queries:
Subqueries that are used inside expressions are pulled out of these
expressions and executed beforehand. That means that subqueries do not
participate in lazy evaluation of operands, for example in the ternary
operator. Also see evaluation of subqueries.
Also noted here for the ternary operator:
https://www.arangodb.com/docs/3.8/aql/operators.html#ternary-operator.
An answer to the question what to do may be to use a FILTER before enumerating over the attributes:
FOR doc IN collection
/* the following filter will only let those documents passed in which "attribute1.names" is an array */
FILTER IS_ARRAY(doc.attribute1.names)
FOR name IN doc.attribute1.names
FILTER name.language == "xyz"
RETURN name.name
Other solutions are also possible. Depends a bit on the use case.
I'm very new in using Cognos report studio and trying to filter some of the values and replace them into others.
I currently have values that are coming out as blanks and want to replace them as string "Property Claims"
what i'm trying to use in my main query is
CASE WHEN [Portfolio] is null
then 'Property Claims'
ELSE [Portfolio]
which is giving me an error. Also have a different filter i want to put in to replace windscreen flags to a string value rather than a number. For example if the flag is 1 i want to place it as 'Windscreen Claims'.
if [Claim Windscreen Flag] = 1
then ('Windscreen')
Else [Claim Windscreen Flag]
None of this works with the same error....can someone give me a hand?
Your first CASE statement is missing the END. The error message should be pretty clear. But there is a simpler way to do that:
coalesce([Portfolio], 'Property Claims')
The second problem is similar: Your IF...THEN...ELSE statement is missing a bunch of parentheses. But after correcting that you may have problems with incompatible data types. You may need to cast the numbers to strings:
case
when [Claim Windscreen Flag] = 1 then ('Windscreen')
else cast([Claim Windscreen Flag], varchar(50))
end
In future, please include the error messages.
it might be syntax
IS NULL (instead of = null)
NULL is not blank. You might also want = ' '
case might need an else and END at the bottom
referring to a data type as something else can cause errors. For example a numeric like [Sales] = 'Jane Doe'
For example (assuming the result is a string and data item 2 is also a string),
case
when([data item 1] IS NULL)Then('X')
when([data item 1] = ' ')Then('X')
else([data item 2])
end
Also, if you want to show a data item as a different type, you can use CAST
Let's assume that I have Custom Table named Possible URL target parameters with code name xyz.PossibleTargets with 2 columns:
Explanation and Value.
How to feed drop-down field on page type with data to have Value (from table) as Value and Explanation as name in drop-down?
What I already tried and it is not working:
Generate value;name pairs divided by newline and place it as List of options:
z = ""; foreach (x in CMSContext.Current.GlobalObjects.CustomTables["xyz.PossibleTargets"].Items) {z += x.GetValue("Value"); z +=";"; z += x.GetValue("Explanation"); z += "\n" }; return z;
Validator do no allow me to do such trick.
Set option Macro expression and provide enumerable object:
CMSContext.Current.GlobalObjects.CustomTables["xyz.PossibleTargets"].Items
In Item transformation: {%Explanation%} and in Value column {%TargetValue%}.
This do not work also.
Dropdown configuration
How to do this correctly? Documentation and hints on the fields are not helpful.
Kentico v11.0.26
I think that you should do it without marking field as a macro. Just type there the macro. Take a look on screen
No need to use a macro, use straight SQL, using a macro only complicates what appears to be a simple dropdown list.
SELECT '', '-- select one --' AS Explanation
UNION
SELECT TargetValue, Explanation
FROM xyz_PossibleTargets -- make sure to use the correct table name
ORDER BY ExplanationText
This should populate exactly what you're looking for without the complication of a macro.
I have a field named field, and I would like to see if it is null, but I get an error in the query, my code is this:
let
Condition= Excel.CurrentWorkbook(){[Name="test_table"]}[Content],
field= Condition{0}[fieldColumn],
query1="select * from students",
if field <> null then query1=query1 & " where id = '"& field &"',
exec= Oracle.Database("TESTING",[Query=query1])
in
exec
but I get an error in the condition, do you identify the mistake?
I got Expression.SyntaxError: Token Identifier expected.
You need to assign the if line to a variable. Each M line needs to start with an assignment:
let
Condition= Excel.CurrentWorkbook(){[Name="test_table"]}[Content],
field= Condition{0}[fieldColumn],
query1="select * from students",
query2 = if field <> null then query1 & " some stuff" else " some other stuff",
exec= Oracle.Database("TESTING",[Query=query2])
in
exec
In query2 you can build the select statement. I simplified it, because you also have conflicts with the double quotes.
I think you're looking for:
if Not IsNull(field) then ....
Some data types you may have to check using IsEmpty() or 'field is Not Nothing' too. Depending on the datatype and what you are using.
To troubleshoot, it's best to try to set a breakpoint and locate where the error is happening and watch the variable to prevent against that specific value.
To meet this requirement, I would build a fresh Query using the PQ UI to select the students table/view from Oracle, and then use the UI to Filter the [id] column on any value.
Then in the advanced editor I would edit the generated FilteredRows line using code from your Condition + field steps, e.g.
FilteredRows = Table.SelectRows(TESTING_students, each [id] = Excel.CurrentWorkbook(){[Name="test_table"]}{0}[fieldColumn])
This is a minor change from a generated script, rather than trying to write the whole thing from scratch.