I have a variable values stored in environment variables.
when I do
echo $myvar
I can see the value. Below is the example
~% echo $myvar
abcdefghijkl73
Now, I would like to read 8th/13th/14th character from this variable value and print the value
h73
Please help. Thanks in advance.
If you use BASH:
myvar="abcdefghijkl73"; echo ${myvar:7:1}${myvar:12:1}${myvar:13:1}
See "Parameter expansion" section in man bash
For the general POSIX shell you need to use external utility to do this:
echo $myvar | cut -c 8,13,14
This uses cut utility (more information about this utility you can find in info coreutils
Related
Below is a snapshot of a file called ".bashrc":
I'm beginner in bash and What i'm trying to do in bash is to check if the last two lines inside the file exist and correctly written like for example :
if [ export PATH=/opt/ads2/arm-linux64/bin:$PATH ]
then
echo "found system variable lines"
else
echo "systemvariables do not exists, please insert it in .bashrc"
fi
However, this doesn't seem to be trivial since the tow lines to be shared are not pure string lines.
Thanks in advance
Use grep to find stuff in file contents.
# if file .bashrc contains the line exactly export PATH=....
if grep -Fxq 'export PATH=/opt/ads2/arm-linux64/bin:$PATH' .bashrc ; then
echo "found system variable lines"
else
echo "systemvariables do not exists, please insert it in .bashrc"
fi
Read man grep and decide if you want or not the -F and -x options in grep. For sure research and learn regex - I recommend regex crosswords available on the net. Research also difference between single quoting and double quoting in shell. Remember to check scripts with http://shellcheck.net
I'm trying to configure a file with a bash script. And the variables in the bash script are not written in file as it is written in script.
Ex:
#!/bin/bash
printf "%s" "template("$DATE\t$HOST\t$PRIORITY\t$MSG\n")" >> /file.txt
exit 0
This results to template('tttn') instead of template("$DATE\t$HOST\t$PRIORITY\t$MSG\n in file.
How do I write in the script so that the result is template("$DATE\t$HOST\t$PRIORITY\t$MSG\n in the configured file?
Is it possible to write variable as it looks in script to file?
Enclose the strings you want to write within single quotes to avoid variable replacement.
> FOO=bar
> echo "$FOO"
bar
> echo '$FOO'
$FOO
>
Using printf in any shell script is uncommon, just use echo with the -e option.
It allows you to use ANSI C metacharacters, like \t or \n. The \n at the end however isn't necessary, as echo will add one itself.
echo -e "template(${DATE}\t${HOST}\t${PRIORITY}\t${MSG})" >> file.txt
The problem with what you've written is, that ANSI C metacharacters, like \t can only be used in the first parameter to printf.
So it would have to be something like:
printf 'template(%s\t%s\t%s\t%s)\n' ${DATE} ${HOST} ${PRIORITY} ${MSG} >> file.txt
But I hope we both agree, that this is very hard on the eyes.
There are several escaping issues and the power of printf has not been used, try
printf 'template(%s\t%s\t%s\t%s)\n' "${DATE}" "${HOST}" "${PRIORITY}" "${MSG}" >> file.txt
Reasons for this separate answer:
The accepted answer does not fit the title of the question (see comment).
The post with the right answer
contains wrong claims about echo vs printf as of this post and
is not robust against whitespace in the values.
The edit queue is full at the moment.
I'm new to shell programming. I intend to get directory name after zip file was extracted. The print statement of it is
$test.sh helloworld.zip
helloworld
Let's take a look at test.sh:
#! /bin/sh
length=echo `expr index "$1" .zip`
a=$1
echo $(a:0:length}
However I got the Bad substitution error from the compiler.
And when I mention about 'shell'.I just talking about shell for I don't know the difference between bash or the others.I just using Ubuntu 10.04 and using the terminal. (I am using bash.)
If your shell is a sufficiently recent version of bash, that parameter expansion notation should work.
In many other shells, it will not work, and a bad substitution error is the way the shell says 'You asked for a parameter substitution but it does not make sense to me'.
Also, given the script:
#! /bin/sh
length=echo `expr index "$1" .zip`
a=$1
echo $(a:0:length}
The second line exports variable length with value echo for the command that is generated by running expr index "$1" .zip. It does not assign to length. That should be just:
length=$(expr index "${1:?}" .zip)
where the ${1:?} notation generates an error if $1 is not set (if the script is invoked with no arguments).
The last line should be:
echo ${a:0:$length}
Note that if $1 holds filename.zip, the output of expr index $1 .zip is 2, because the letter i appears at index 2 in filename.zip. If the intention is to get the base name of the file without the .zip extension, then the classic way to do it is:
base=$(basename $1 .zip)
and the more modern way is:
base=${1%.zip}
There is a difference; if the name is /path/to/filename.zip, the classic output is filename and the modern one is /path/to/filename. You can get the classic output with:
base=${1%.zip}
base=${base##*/}
Or, in the classic version, you can get the path with:
base=$(dirname $1)/$(basename $1 .zip)`.)
If the file names can contain spaces, you need to think about using double quotes, especially in the invocations of basename and dirname.
Try running it with bash.
bash test.sh helloworld.zip
-likewise-
"try changing the first line to #!/bin/bash" as comment-answered by – #shellter
Try that in bash :
echo $1
len=$(wc -c <<< "$1")
a="${1}.zip"
echo ${a:0:$len}
Adapt it to fit your needs.
I have a simple script named example:
#!/bin/sh
echo $'${1}'
Please note that the usage of $'' here is to convert \n into new line.
${1} is the first parameter passed to this shell script.
I want to pass a parameter to this script example and it prints the following:
#1. You're smart!
#2. It's a difficult question!
I tried the following:
example "#1. You're smart!\n#2. It's a difficult question!"
An error: -bash: !\n#2.: event not found
Then I tried to escape ! by single quote, and tried:
example '#1. You're smart\!\n#2. It's a difficult question\!'
It outputs:
${1}
Any solution here? Thanks a lot!
$ cat t.sh
#! /bin/bash
echo -e $#
Or echo -e $1, or echo -e ${1} if you just want to process the first argument.
To get bash to stop trying to expand !, use set +H (see In bash, how do I escape an exclamation mark?)
$ set +H
$ ./t.sh "#1. You're smart!\n#2. It's a difficult question!"
#1. You're smart!
#2. It's a difficult question!
What's inside a $'' expression has to be a literal. You can't expand other variables inside it.
But you can do this:
echo "${1//\\n/$'\n'}"
Jan Hudec has an even better answer:
echo -e "$1"
I'm writing a shell script that should be somewhat secure, i.e., does not pass secure data through parameters of commands and preferably does not use temporary files. How can I pass a variable to the standard input of a command?
Or, if it's not possible, how can I correctly use temporary files for such a task?
Passing a value to standard input in Bash is as simple as:
your-command <<< "$your_variable"
Always make sure you put quotes around variable expressions!
Be cautious, that this will probably work only in bash and will not work in sh.
Simple, but error-prone: using echo
Something as simple as this will do the trick:
echo "$blah" | my_cmd
Do note that this may not work correctly if $blah contains -n, -e, -E etc; or if it contains backslashes (bash's copy of echo preserves literal backslashes in absence of -e by default, but will treat them as escape sequences and replace them with corresponding characters even without -e if optional XSI extensions are enabled).
More sophisticated approach: using printf
printf '%s\n' "$blah" | my_cmd
This does not have the disadvantages listed above: all possible C strings (strings not containing NULs) are printed unchanged.
(cat <<END
$passwd
END
) | command
The cat is not really needed, but it helps to structure the code better and allows you to use more commands in parentheses as input to your command.
Note that the 'echo "$var" | command operations mean that standard input is limited to the line(s) echoed. If you also want the terminal to be connected, then you'll need to be fancier:
{ echo "$var"; cat - ; } | command
( echo "$var"; cat - ) | command
This means that the first line(s) will be the contents of $var but the rest will come from cat reading its standard input. If the command does not do anything too fancy (try to turn on command line editing, or run like vim does) then it will be fine. Otherwise, you need to get really fancy - I think expect or one of its derivatives is likely to be appropriate.
The command line notations are practically identical - but the second semi-colon is necessary with the braces whereas it is not with parentheses.
This robust and portable way has already appeared in comments. It should be a standalone answer.
printf '%s' "$var" | my_cmd
or
printf '%s\n' "$var" | my_cmd
Notes:
It's better than echo, reasons are here: Why is printf better than echo?
printf "$var" is wrong. The first argument is format where various sequences like %s or \n are interpreted. To pass the variable right, it must not be interpreted as format.
Usually variables don't contain trailing newlines. The former command (with %s) passes the variable as it is. However tools that work with text may ignore or complain about an incomplete line (see Why should text files end with a newline?). So you may want the latter command (with %s\n) which appends a newline character to the content of the variable. Non-obvious facts:
Here string in Bash (<<<"$var" my_cmd) does append a newline.
Any method that appends a newline results in non-empty stdin of my_cmd, even if the variable is empty or undefined.
I liked Martin's answer, but it has some problems depending on what is in the variable. This
your-command <<< """$your_variable"""
is better if you variable contains " or !.
As per Martin's answer, there is a Bash feature called Here Strings (which itself is a variant of the more widely supported Here Documents feature):
3.6.7 Here Strings
A variant of here documents, the format is:
<<< word
The word is expanded and supplied to the command on its standard
input.
Note that Here Strings would appear to be Bash-only, so, for improved portability, you'd probably be better off with the original Here Documents feature, as per PoltoS's answer:
( cat <<EOF
$variable
EOF
) | cmd
Or, a simpler variant of the above:
(cmd <<EOF
$variable
EOF
)
You can omit ( and ), unless you want to have this redirected further into other commands.
Try this:
echo "$variable" | command
If you came here from a duplicate, you are probably a beginner who tried to do something like
"$variable" >file
or
"$variable" | wc -l
where you obviously meant something like
echo "$variable" >file
echo "$variable" | wc -l
(Real beginners also forget the quotes; usually use quotes unless you have a specific reason to omit them, at least until you understand quoting.)