I am training a model in Theano 0.9 and Lasagne 0.1 and want to run it on GPU. I've set THEANO_FLAGS as follows:
THEANO_FLAGS=device=gpu0,force_device=True,floatX=float64
Theano prints it is using GPU
Using gpu device 0: GeForce GTX 980 Ti (CNMeM is disabled, cuDNN 4007)
However, I noticed it's not, profiling shows that it's using CorrMM operation which is according to the docs
CorrMM This is a CPU-only 2d correlation implementation taken from caffe’s cpp implementation and also used by Torch.
I have CUDA Toolkit 7.5 installed, Tensorflow works perfectly on GPU.
For some reason Theano is falling back to CPU, it is supposed to cause an error due to force_device flag but it's not.
I am not sure where the problem is as I'm new to Theano, I appreciate your help.
Issue is floatX=float64.
Use floatX=float32. GPU supports 32 bit only yet.
Related
I met this issue when I running my python file in linux.
I searched some answers in google like use the code below:
os.environ['TF_CPP_MIN_LOG_LEVEL'] = '2'
The system can be running but without ant out information. Actually I found the 2 measn ignore all information while 1 means give all information like error or normal output.
because I need to use GPU so my original code is:
os.environ["CUDA_VISIBLE_DEVICES"]="0"
But if I keep the code my output would be an error information like the title.
How can I do? and of course I need use the GPU and the codes can be running in colab which indicated that my code has no problem.
some guys even said uninstall tensorboard...that must a wrong way.
Or should I download tensorflow gpu not tensorflow in m,y virtual enviroment? when I USE THE tensorflow gpu version, the error is core dumped.
If when forcing the os.environ["CUDA_VISIBLE_DEVICES"]="0" doesn't work, then this means that your tensorflow gpu installation did not succeed. You must ensure you have the right combination of TensorFlow + CUDA + CUDNN. That is why you get the error, because due to improper versions/installation TF falls back on CPU.
I am using A100-SXM4-40GB Gpu but training is terribly slow. I tried two models, a simple classification on cifar and a Unet on Cityscapes. I tried my code on other GPUs and it worked totally fine, but I do not know why training on this high capacity GPU is super slow.
I would appreciate any help.
Here are some other properties of GPUs.
GPU 0: A100-SXM4-40GB
GPU 1: A100-SXM4-40GB
GPU 2: A100-SXM4-40GB
GPU 3: A100-SXM4-40GB
Nvidia driver version: 460.32.03
cuDNN version: Could not collect
Thank you for your answer. Before trying your answer, I decided to uninstall anaconda and reinstall it and this solved the problem.
Call .cuda() on the model during initialization.
As per your above comments, you have GPUs, as well as CUDA installed, so there's no point of checking the device availability with torch.cuda.is_available().
Additionally, you should wrap your model in nn.DataParallel to allow PyTorch use every GPU you expose it to. You also could do DistributedDataParallel, but DataParallel is easier to grasp initially.
Example initialization:
model = UNet().cuda()
model = torch.nn.DataParallel(model)
Also, you can be sure you're exposing the code to all GPUs by executing the python script with the following flag:
CUDA_VISIBLE_DEVICES=0,1,2,3 python3 train_unet.py
Last thing to note - nn.DataParallel encapsulates the model itself, so for saving the state_dict, you'll need to reach module inside DataParallel:
torch.save(model.module.state_dict(), 'unet.pth')
I am trying to train a NER Spacy model on the CLI. Following all the steps necessary I finally created a correct input file, however when trying to train on the GPU I get the message that spacy is unable to activate the GPU, other programs actually are able to use my GPU and cuda is set up correctly. Still it doesn't seem to work, I only have 1 GPU in my computer so I selected -g 0 on the CLI. I can't find any further information as why the GPU cannot be activated, searching the internet has led to nothing either.
Training pipeline: ['ner']
⚠ Unable to activate GPU: 0
Using CPU only
NVIDIA-driver-version: 440.64
CUDA-verion: 10.2
GPU GeForce RTX 2060
Image showing the nvidia-smi output
Check that you have the correct version of cupy (from your CUDA version above: cupy-cuda102) installed.
I am trying to install using the instructions here
I have a compatible nVIDIA GEFORCE 920M GPU and the CRUD DNN toolkit and the driver both installed on the System.
when I do the step on the python program to test tensorflow installation on GPU:
import tensorflow as tf
sess = tf.Session(config=tf.ConfigProto(log_device_placement=True))
The output I get is:
>>> sess = tf.Session(config=tf.ConfigProto(log_device_placement=True))
2017-05-28 09:38:01.349304: W c:\tf_jenkins\home\workspace\release-
win\device\cpu\os\windows\tensorflow\core\platform\cpu_feature_guard.cc:45]
The TensorFlow library wasn't compiled to use SSE instructions, but these
are available on your machine and could speed up CPU computations.
2017-05-28 09:38:01.349459: W c:\tf_jenkins\home\workspace\release-
win\device\cpu\os\windows\tensorflow\core\platform\cpu_feature_guard.cc:45]
The TensorFlow library wasn't compiled to use SSE2 instructions, but these
are available on your machine and could speed up CPU computations.
2017-05-28 09:38:01.349583: W c:\tf_jenkins\home\workspace\release-
win\device\cpu\os\windows\tensorflow\core\platform\cpu_feature_guard.cc:45]
The TensorFlow library wasn't compiled to use SSE3 instructions, but these
are available on your machine and could speed up CPU computations.
2017-05-28 09:38:01.349705: W c:\tf_jenkins\home\workspace\release-
win\device\cpu\os\windows\tensorflow\core\platform\cpu_feature_guard.cc:45]
The TensorFlow library wasn't compiled to use SSE4.1 instructions, but these
are available on your machine and could speed up CPU computations.
2017-05-28 09:38:01.354312: I c:\tf_jenkins\home\workspace\release-
win\device\cpu\os\windows\tensorflow\core\common_runtime\direct_session.cc:257] Device mapping:
My pin pointed questions to you are:
Why is the nVIDIA GPU not getting detected when all librariries and toolkits are installed without errors?
Why is it the output saying "TensorFlow library wasn't compiled to use SSE4.1 instructions, but these
are available on your machine and could speed up CPU computations" and how do i rectify this?
Please give a step by step solution. None other.
Thanks in advance for your answers.
Okay my pinpointed answers:
Why is the nVIDIA GPU not getting detected when all librariries and toolkits are installed without errors?
Ans: Go to NVidia GEFORCE Application and update the driver then the libraries will start getting detected and the errors will go away.
Why is it the output saying "TensorFlow library wasn't compiled to use SSE4.1 instructions, but these are available on your machine and could speed up CPU computations" and how do i rectify this?
Ans: Once you have done the above update the TensorFlow Library will stop giving the SSE errors. This will resolve your issue.
Please give a step by step solution. None other.
Ans: Given above should work it has worked for me.
Im new in Python and Theano library. I want to install Theano on windows 7-64. I have a display adapters :
Intel(R) HD Graphics 3000 which is not compatible with NVIDA.
My QUESTIONS:
1-Is obligatory to install CUDA to i can use Theano?
2- Even if i have an Ubuntu opearting system, with the same display adapters, CUDA still mandatory?
Any help!
Thanks
You do not need CUDA to run Theano.
Theano can run on either CPU or GPU. If you want to run on GPU you must (currently) use CUDA which means you must be using a NVIDIA display adapter. Without CUDA/NVIDIA you must run on CPU.
There is no disadvantage to running on CPU other than speed -- Theano can be much faster on GPU but everything that runs on a GPU will also run on a CPU as long as it has been coded generically (the default and standard method for Theano code).