Related
As you can see in the image below, I see two different versions of node depending on which command I run.
I need the newer version, but npm sees the old version.
Many times I've removed, purged, reinstalled, etc.
I tried installing nvm as root and setting the node version there, but that didn't help either.
If I use apt install nodejs instead of nvm, it tells me that I already have the newest version, which it believes is 12.22.9.
How do I get npm to recognize the newer version (18.12.1) of node that I installed via nvm?
It is because you have a different version of the Node.js which is installed for the root and that particular user.
First, you need to uninstall Node.js:
sudo apt-get remove nodejs
or
sudo npm rm npm -g
If you have any problem with the above commands, then after running which node command, go to that directory, and run the following commands:
rm -r bin/node bin/node-waf include/node lib/node lib/pkgconfig/nodejs.pc share/man/man1/node.1
Do the same thing for the current user if needed.
The default Ubuntu/Debian package manager does not have the latest Node.js, and that's why whenever you try to install Node.js with apt install nodejs it says you have the latest version.
According to the official Node.js documentation, for installing the latest version, you should follow these steps:
Using Ubuntu
curl -fsSL https://deb.nodesource.com/setup_19.x | sudo -E bash - &&\
sudo apt-get install -y nodejs
P.S: No need to run npm or node with sudo. Therefore, I highly recommend you to not use every command with sudo.
I've just installed nodejs on Debian 7 - by apt-get install nodejs.
Nodejs seems to be working fine, but when I enter "npm" I get "command not found".
"which nodejs" points to "usr/bin" and there it is - nodejs, but there is no npm file, what went wrong?
I found a few solutions, but all of them are related to Macs
BTW, "usr/local/bin" directory is empty I believe everything should install right there?
You have several options.
If you want to continue using Debian packages, you could install npm (debian maintainers have it in a separate package).
apt-get install npm
If you want to just install npm, you can use this modification of Maxime's answer:
curl -L https://npmjs.org/install.sh | sudo sh
(the -L is needed to make curl follow redirects.)
Finally, you may wish to use a different package source.
For some Linux distributions (Debian/Ubuntu and RedHat/CentOS), the latest node version provided by the distribution may lag behind the stable version. Here are instructions from NodeSource on getting the latest node, which includes npm and avoids using the problematic nodejs alias
Install npm
curl -L https://npmjs.org/install.sh | sudo sh
(the -L is needed to make curl follow redirects.)
and check version
npm -v
Node.js is easy to install in Linux
create a directory nodejs inside /usr/local/lib
download nodejs
move downloaded tar.xz file inside /usr/local/lib
extract the tar.xz file and rename as like node-v8.9.4
setup environment
cd ./etc/profile.d
ls
sudo touch nodejs-env.sh
sudo atom nodejs-env.sh
where atom is my favourite editor; you can use your editor.
copy and paste below code inside nodejs-env.sh and save
export NODEJS_HOME=/usr/local/lib/nodejs/node-v8.9.4
export PATH=$NODEJS_HOME/bin:$PATH
restart you machine.
done
There were several methods to install node.js on your debian. But I prefer this one:
Setup with Debian (as root):
apt-get install curl
curl --silent --location https://deb.nodesource.com/setup_0.12 | sudo bash -
Then install with Debian (as root):
apt-get install --yes nodejs
After that, relaunch your terminal and type "npm" in your terminal.
The problem you're facing is due the need of super user rights during the installation. As others mentioned, you could do it via the sudo command and the manual installer.
Either way, there're several ways to install node in *unix platforms in a safer way without the need of super user rights using NVM (Node Version Manager).
Steps:
$ wget -qO- https://raw.githubusercontent.com/creationix/nvm/v0.25.4/install.sh | bash
$ nvm install 0.10
Also, you can find different techniques to install node and npm without having to sudo.
NodeJS interpreter name(node) on Ubuntu has been renamed to nodejs because of a name conflict with another package. Here's what the readme. Debian says:
The upstream name for the Node.js interpreter command is "node".
In Debian the interpreter command has been changed to "nodejs".
This was done to prevent a namespace collision: other commands use
the same name in their upstream, such as ax25-node from the "node"
package.
Scripts calling Node.js as a shell command must be changed to instead
use the "nodejs" command.
However, using nodejs mucks up installing packages using npm. Package installation fails with the following error:
sh: 1: node: not found
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read /usr/share/doc/nodejs/README.Debian
How do I make npm understand that nodejs is already installed on the system but the interpreter name is different?
TL;DR:
sudo apt-get install nodejs-legacy
First of all let me clarify the situation a bit. In summer 2012 Debian maintainers decided to rename Node.js executable to prevent some kind of namespace collision with another package. It was very hard decision for Debian Technical Committee, because it breaks backward compatibility.
The following is a quote from Committee resolution draft, published in Debian mailing list:
The nodejs package shall be changed to provide /usr/bin/nodejs, not /usr/bin/node. The package should declare a Breaks: relationship with
any packages in Debian that reference /usr/bin/node.
The nodejs source package shall also provide a nodejs-legacy binary package at Priority: extra that contains /usr/bin/node as a symlink to
/usr/bin/nodejs. No package in the archive may depend on or recommend
the nodejs-legacy package, which is provided solely for upstream
compatibility. This package declares shall also declare a Conflicts:
relationship with the node package.
<...>
Paragraph 2 is the actual solution for OP's issue. OP should try to install this package instead of doing symlink by hand. Here is a link to this package in Debian package index website.
It can be installed using sudo apt-get install nodejs-legacy.
I have not found any information about adopting the whole thing by NPM developers, but I think npm package will be fixed on some point and nodejs-legacy become really legacy.
Try linking node to nodejs. First find out where nodejs is
whereis nodejs
Then soft link node to nodejs
ln -s [the path of nodejs] /usr/bin/node
I am assuming /usr/bin is in your execution path. Then you can test by typing node or npm into your command line, and everything should work now.
You can also install Nodejs using NVM or Nodejs Version Manager There are a lot of benefits to using a version manager. One of them being you don't have to worry about this issue.
Instructions:
sudo apt-get update
sudo apt-get install build-essential libssl-dev
Once the prerequisite packages are installed, you can pull down the nvm installation script from the project's GitHub page. The version number may be different, but in general, you can download and install it with the following syntax:
curl https://raw.githubusercontent.com/creationix/nvm/v0.16.1/install.sh | sh
This will download the script and run it. It will install the software into a subdirectory of your home directory at ~/.nvm. It will also add the necessary lines to your ~/.profile file to use the file.
To gain access to the nvm functionality, you'll need to log out and log back in again, or you can source the ~/.profile file so that your current session knows about the changes:
source ~/.profile
Now that you have nvm installed, you can install isolated Node.js versions.
To find out the versions of Node.js that are available for installation, you can type:
nvm ls-remote
. . .
v0.11.10
v0.11.11
v0.11.12
v0.11.13
v0.11.14
As you can see, the newest version at the time of this writing is v0.11.14. You can install that by typing:
nvm install 0.11.14
Usually, nvm will switch to use the most recently installed version. You can explicitly tell nvm to use the version we just downloaded by typing:
nvm use 0.11.14
When you install Node.js using nvm, the executable is called node. You can see the version currently being used by the shell by typing:
node -v
The comeplete tutorial can be found here
Install nvm first using:
curl https://raw.githubusercontent.com/creationix/nvm/v0.11.1/install.sh | bash
Run command
source ~/.profile
Now run this and this will show will all installed or other versions of packages:
nvm ls-remote
Installed packages will be in green. Install whatever version you want:
nvm install 6.0.0
Check where is not installed:
which node
Check current version:
node -v
n=$(which node);
n=${n%/bin/node};
chmod -R 755 $n/bin/*;
sudo cp -r $n/{bin,lib,share} /usr/local
sudo apt-get --purge remove node
sudo apt-get --purge remove nodejs-legacy
sudo apt-get --purge remove nodejs
sudo apt-get install nodejs-legacy
source ~/.profile
Combined the accepted answer with source ~/.profile from the comment that has been folded and some clean up commands before. Most likely you will also need to sudo apt-get install npm after.
for me problem was solved by,
sudo apt-get remove node
sudo apt-get remove nodejs
curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
sudo apt-get install -y nodejs
sudo ln -s /usr/bin/nodejs /usr/bin/node
alias node=nodejs
rm -r /usr/local/lib/python2.7/dist-packages/localstack/node_modules
npm install -g npm#latest || sudo npm install -g npm#latest
Here's another approach I use since I like n for easy switching between node versions.
On a new Ubuntu system, first install the 'system' node:
curl -sL https://deb.nodesource.com/setup | sudo bash -
Then install n module globally:
npm install -g n
Since the system node was installed first (above), the alternatives system can be used to cleanly point to the node provided by n. First make sure the alternatives system has nothing for node:
update-alternatives --remove-all node
Then add the node provided by n:
update-alternatives --install /usr/bin/node node /usr/local/bin/node 1
Next add node provided by the system (the one that was installed with curl):
update-alternatives --install /usr/bin/node node /usr/bin/nodejs 2
Now select the node provided by n using the interactive menu (select /usr/local/bin/node from the menu presented by the following command):
update-alternatives --config node
Finally, since /usr/local/bin usually has a higher precedence in PATH than /usr/bin, the following alias must be created (enter in your .bashrc or .zshrc) if the alternatives system node is to be effective; otherwise the node installed with n in /usr/local/bin takes always precedence:
alias node='/usr/bin/node'
Now you can easily switch between node versions with n <desired node version number>.
On Linux Mint 17, I tried both solutions (creating a symlink or using the nodejs-legacy package) without success.
The only thing that finally worked for me was using the ppa from Chris Lea:
sudo apt-get purge node-*
sudo apt-get autoremove
sudo add-apt-repository ppa:chris-lea/node.js
sudo apt-get update
sudo apt-get install nodejs
This installed node version 10.37 and npm 1.4.28. After that, I could install packages globally.
As other folks already mention, I will suggest not to use "sudo apt-get" to install node or any development library. You can download required version from https://nodejs.org/dist/v6.9.2/ and setup you own environment.
I will recommend tools like nvm and n, to manage you node version. It is very convenient to switch and work with these modules.
https://github.com/creationix/nvm
https://github.com/tj/n
Or write basic bash to download zip/tar, extract move folder and create a soft link. Whenever you need to update, just point the old soft link to new downloaded version.
Like I have created for my own, you can refer:
https://github.com/deepakshrma/NodeJs-4.0-Reference-Guide/blob/master/nodejs-installer.sh
#Go to home
cd ~
#run command
#New Script
wget https://raw.githubusercontent.com/deepakshrma/NodeJs-4.0-Reference-Guide/master/nodejs-installer.sh
bash nodejs-installer.sh -v lts
#here -v or --version can be sepecific to 0.10.37 or it could be latest/lts
#Examples
bash nodejs-installer.sh -v lts
bash nodejs-installer.sh -v latest
bash nodejs-installer.sh -v 4.4.2
Simple solution from here
curl -sL https://deb.nodesource.com/setup_7.x | sudo -E bash --
sudo apt-get install nodejs
You can specify version by changing setup_x.x value, for example to setup_5.x
Your System is not able to detect the path node js binary.
1.which node
2.Then soft link node to nodejs
ln -s [the path of nodejs] /usr/bin/node
I am assuming /usr/bin is in your execution path. Then you can test by typing node or npm into your command line, and everything should work now.
Uninstall whatever node version you have
sudo apt-get --purge remove node
sudo apt-get --purge remove nodejs-legacy
sudo apt-get --purge remove nodejs
install nvm (Node Version Manager) https://github.com/creationix/nvm
wget -qO- https://raw.githubusercontent.com/creationix/nvm/v0.31.0/install.sh | bash
Now you can install whatever version of node you want and switch between the versions.
I fixed it unlinking /usr/sbin/node (which is linked to ax25-node package), then I have create a link to nodejs using this on command line
sudo ln -s /usr/bin/nodejs /usr/bin/node
Because package such as karma doesn't work with nodejs name, however changing the first line of karma script from node to nodejs, but I prefer resolve this issue once and for all
For me the fix was removing the node* packages and also the npm packages.
Then a fresh install as:
sudo apt-get install autoclean
sudo apt-get install nodejs-legacy
npm install
Problem is not in installer
replace nodejs with node or change the path from /usr/bin/nodejs to /usr/bin/node
This is the your node is not properly install, first you need to uninstall the node then install again.
To install the node this may help you
http://array151.com/blog/nodejs-tutorial-and-set-up/
after that you can install the packages easily. To install the packages this may help you
http://array151.com/blog/npm-node-package-manager/
you can create a link ln -s nodejs node in /usr/bin
hope this solves your problem.
node -v // first check it's install or not
npm -v
sudo apt install npm
curl -sL https://deb.nodesource.com/setup_10.x | sudo -E bash –
sudo apt-get install nodejs
then check
node -v or node –version
npm -v or npm –version
or you can remove package.lock json file / node_modules than run npm i
I hope it'll work fine
steps : https://www.geeksforgeeks.org/installation-of-node-js-on-linux/
Faced same issue, steps below worked for me.
Install curl on your system then run NVM installer script.
sudo apt install curl
curl https://raw.githubusercontent.com/creationix/nvm/master/install.sh | bash
Load the environment
source ~/.profile
Install the supported version of Node.js.
nvm install 16.15.1
Confirm the installation
node -v
NodeJS interpreter name(node) on Ubuntu has been renamed to nodejs because of a name conflict with another package. Here's what the readme. Debian says:
The upstream name for the Node.js interpreter command is "node".
In Debian the interpreter command has been changed to "nodejs".
This was done to prevent a namespace collision: other commands use
the same name in their upstream, such as ax25-node from the "node"
package.
Scripts calling Node.js as a shell command must be changed to instead
use the "nodejs" command.
However, using nodejs mucks up installing packages using npm. Package installation fails with the following error:
sh: 1: node: not found
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read /usr/share/doc/nodejs/README.Debian
How do I make npm understand that nodejs is already installed on the system but the interpreter name is different?
TL;DR:
sudo apt-get install nodejs-legacy
First of all let me clarify the situation a bit. In summer 2012 Debian maintainers decided to rename Node.js executable to prevent some kind of namespace collision with another package. It was very hard decision for Debian Technical Committee, because it breaks backward compatibility.
The following is a quote from Committee resolution draft, published in Debian mailing list:
The nodejs package shall be changed to provide /usr/bin/nodejs, not /usr/bin/node. The package should declare a Breaks: relationship with
any packages in Debian that reference /usr/bin/node.
The nodejs source package shall also provide a nodejs-legacy binary package at Priority: extra that contains /usr/bin/node as a symlink to
/usr/bin/nodejs. No package in the archive may depend on or recommend
the nodejs-legacy package, which is provided solely for upstream
compatibility. This package declares shall also declare a Conflicts:
relationship with the node package.
<...>
Paragraph 2 is the actual solution for OP's issue. OP should try to install this package instead of doing symlink by hand. Here is a link to this package in Debian package index website.
It can be installed using sudo apt-get install nodejs-legacy.
I have not found any information about adopting the whole thing by NPM developers, but I think npm package will be fixed on some point and nodejs-legacy become really legacy.
Try linking node to nodejs. First find out where nodejs is
whereis nodejs
Then soft link node to nodejs
ln -s [the path of nodejs] /usr/bin/node
I am assuming /usr/bin is in your execution path. Then you can test by typing node or npm into your command line, and everything should work now.
You can also install Nodejs using NVM or Nodejs Version Manager There are a lot of benefits to using a version manager. One of them being you don't have to worry about this issue.
Instructions:
sudo apt-get update
sudo apt-get install build-essential libssl-dev
Once the prerequisite packages are installed, you can pull down the nvm installation script from the project's GitHub page. The version number may be different, but in general, you can download and install it with the following syntax:
curl https://raw.githubusercontent.com/creationix/nvm/v0.16.1/install.sh | sh
This will download the script and run it. It will install the software into a subdirectory of your home directory at ~/.nvm. It will also add the necessary lines to your ~/.profile file to use the file.
To gain access to the nvm functionality, you'll need to log out and log back in again, or you can source the ~/.profile file so that your current session knows about the changes:
source ~/.profile
Now that you have nvm installed, you can install isolated Node.js versions.
To find out the versions of Node.js that are available for installation, you can type:
nvm ls-remote
. . .
v0.11.10
v0.11.11
v0.11.12
v0.11.13
v0.11.14
As you can see, the newest version at the time of this writing is v0.11.14. You can install that by typing:
nvm install 0.11.14
Usually, nvm will switch to use the most recently installed version. You can explicitly tell nvm to use the version we just downloaded by typing:
nvm use 0.11.14
When you install Node.js using nvm, the executable is called node. You can see the version currently being used by the shell by typing:
node -v
The comeplete tutorial can be found here
Install nvm first using:
curl https://raw.githubusercontent.com/creationix/nvm/v0.11.1/install.sh | bash
Run command
source ~/.profile
Now run this and this will show will all installed or other versions of packages:
nvm ls-remote
Installed packages will be in green. Install whatever version you want:
nvm install 6.0.0
Check where is not installed:
which node
Check current version:
node -v
n=$(which node);
n=${n%/bin/node};
chmod -R 755 $n/bin/*;
sudo cp -r $n/{bin,lib,share} /usr/local
sudo apt-get --purge remove node
sudo apt-get --purge remove nodejs-legacy
sudo apt-get --purge remove nodejs
sudo apt-get install nodejs-legacy
source ~/.profile
Combined the accepted answer with source ~/.profile from the comment that has been folded and some clean up commands before. Most likely you will also need to sudo apt-get install npm after.
for me problem was solved by,
sudo apt-get remove node
sudo apt-get remove nodejs
curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
sudo apt-get install -y nodejs
sudo ln -s /usr/bin/nodejs /usr/bin/node
alias node=nodejs
rm -r /usr/local/lib/python2.7/dist-packages/localstack/node_modules
npm install -g npm#latest || sudo npm install -g npm#latest
Here's another approach I use since I like n for easy switching between node versions.
On a new Ubuntu system, first install the 'system' node:
curl -sL https://deb.nodesource.com/setup | sudo bash -
Then install n module globally:
npm install -g n
Since the system node was installed first (above), the alternatives system can be used to cleanly point to the node provided by n. First make sure the alternatives system has nothing for node:
update-alternatives --remove-all node
Then add the node provided by n:
update-alternatives --install /usr/bin/node node /usr/local/bin/node 1
Next add node provided by the system (the one that was installed with curl):
update-alternatives --install /usr/bin/node node /usr/bin/nodejs 2
Now select the node provided by n using the interactive menu (select /usr/local/bin/node from the menu presented by the following command):
update-alternatives --config node
Finally, since /usr/local/bin usually has a higher precedence in PATH than /usr/bin, the following alias must be created (enter in your .bashrc or .zshrc) if the alternatives system node is to be effective; otherwise the node installed with n in /usr/local/bin takes always precedence:
alias node='/usr/bin/node'
Now you can easily switch between node versions with n <desired node version number>.
On Linux Mint 17, I tried both solutions (creating a symlink or using the nodejs-legacy package) without success.
The only thing that finally worked for me was using the ppa from Chris Lea:
sudo apt-get purge node-*
sudo apt-get autoremove
sudo add-apt-repository ppa:chris-lea/node.js
sudo apt-get update
sudo apt-get install nodejs
This installed node version 10.37 and npm 1.4.28. After that, I could install packages globally.
As other folks already mention, I will suggest not to use "sudo apt-get" to install node or any development library. You can download required version from https://nodejs.org/dist/v6.9.2/ and setup you own environment.
I will recommend tools like nvm and n, to manage you node version. It is very convenient to switch and work with these modules.
https://github.com/creationix/nvm
https://github.com/tj/n
Or write basic bash to download zip/tar, extract move folder and create a soft link. Whenever you need to update, just point the old soft link to new downloaded version.
Like I have created for my own, you can refer:
https://github.com/deepakshrma/NodeJs-4.0-Reference-Guide/blob/master/nodejs-installer.sh
#Go to home
cd ~
#run command
#New Script
wget https://raw.githubusercontent.com/deepakshrma/NodeJs-4.0-Reference-Guide/master/nodejs-installer.sh
bash nodejs-installer.sh -v lts
#here -v or --version can be sepecific to 0.10.37 or it could be latest/lts
#Examples
bash nodejs-installer.sh -v lts
bash nodejs-installer.sh -v latest
bash nodejs-installer.sh -v 4.4.2
Simple solution from here
curl -sL https://deb.nodesource.com/setup_7.x | sudo -E bash --
sudo apt-get install nodejs
You can specify version by changing setup_x.x value, for example to setup_5.x
Your System is not able to detect the path node js binary.
1.which node
2.Then soft link node to nodejs
ln -s [the path of nodejs] /usr/bin/node
I am assuming /usr/bin is in your execution path. Then you can test by typing node or npm into your command line, and everything should work now.
Uninstall whatever node version you have
sudo apt-get --purge remove node
sudo apt-get --purge remove nodejs-legacy
sudo apt-get --purge remove nodejs
install nvm (Node Version Manager) https://github.com/creationix/nvm
wget -qO- https://raw.githubusercontent.com/creationix/nvm/v0.31.0/install.sh | bash
Now you can install whatever version of node you want and switch between the versions.
I fixed it unlinking /usr/sbin/node (which is linked to ax25-node package), then I have create a link to nodejs using this on command line
sudo ln -s /usr/bin/nodejs /usr/bin/node
Because package such as karma doesn't work with nodejs name, however changing the first line of karma script from node to nodejs, but I prefer resolve this issue once and for all
For me the fix was removing the node* packages and also the npm packages.
Then a fresh install as:
sudo apt-get install autoclean
sudo apt-get install nodejs-legacy
npm install
Problem is not in installer
replace nodejs with node or change the path from /usr/bin/nodejs to /usr/bin/node
This is the your node is not properly install, first you need to uninstall the node then install again.
To install the node this may help you
http://array151.com/blog/nodejs-tutorial-and-set-up/
after that you can install the packages easily. To install the packages this may help you
http://array151.com/blog/npm-node-package-manager/
you can create a link ln -s nodejs node in /usr/bin
hope this solves your problem.
node -v // first check it's install or not
npm -v
sudo apt install npm
curl -sL https://deb.nodesource.com/setup_10.x | sudo -E bash –
sudo apt-get install nodejs
then check
node -v or node –version
npm -v or npm –version
or you can remove package.lock json file / node_modules than run npm i
I hope it'll work fine
steps : https://www.geeksforgeeks.org/installation-of-node-js-on-linux/
Faced same issue, steps below worked for me.
Install curl on your system then run NVM installer script.
sudo apt install curl
curl https://raw.githubusercontent.com/creationix/nvm/master/install.sh | bash
Load the environment
source ~/.profile
Install the supported version of Node.js.
nvm install 16.15.1
Confirm the installation
node -v
Working on Ec2 on AWS.
I have installed Node.js and it works fine.
But the problem arises when trying to install npm.
I am using the following command to install it:
sudo curl http://npmjs.org/install.sh | sh
But the install seems to freeze...
I get "fetching: http://registry.npmjs.org/npm/-/npm-1.0.106.tgz" at the prompt and it stays on like this.
Have any idea what is going on here?
sudo yum install nodejs npm --enablerepo=epel
Follow this AWS Tutorial that uses Node Version Manager.
Node Version Manager (NVM) lets you install multiple versions of Node.js and switch between them.
Here are the steps:
Install NVM
curl -o- https://raw.githubusercontent.com/creationix/nvm/v0.32.0/install.sh | bash
Activate NVM
. ~/.nvm/nvm.sh
Install Node (choose version)
nvm install 15.0.0
Confirm Successful Installation
node -e "console.log('Running Node.js ' + process.version)"
To install NodeJS 6.x execute the following commands:
curl -sL https://rpm.nodesource.com/setup_6.x | sudo -E bash -
yum install nodejs --enablerepo=nodesource
Update
You can install NodeJS 7 and 8 in the same way. Just specify the version you need instead of 6 in the command above.
Update
To update to NodeJS 16 (or any other version) do the following:
rm -rf /etc/yum.repos.d/nodesource-el*
curl -sL https://rpm.nodesource.com/setup_16.x | sudo -E bash -
yum install nodejs --enablerepo=nodesource
Simplest way to install npm/nodejs on Amazon Linux 2 ec2 isntance:
First install epel repo using amazon-linux-extras command as below:
sudo amazon-linux-extras install epel
Now install npm and nodejs as below:
sudo yum install nodejs npm
you can verify the version of node and npm as below:
node -v
npm -v
PS. I've tested this on Amazon Linux 2 AMI (HVM) ec2 instance.
This guide worked perfectly: https://tecadmin.net/install-latest-nodejs-amazon-linux/
Make sure you have make
# sudo yum install -y gcc-c++ make
Install source
# curl -sL https://rpm.nodesource.com/setup_14.x | sudo -E bash -
Install node
# sudo yum install -y nodejs
Note - you'll have to run sudo npm install to get the installs to work.
Firstly
sudo yum install make
You can run this to get zip of desired version of node
wget https://nodejs.org/dist/v8.10.0/node-v8.10.0.tar.gz
Then you can unzip it like this
tar -xvf node-v8.10.0.tar.gz
then go in to the extracted directory and install node like this
./configure && make && sudo make install
I found his tutorial that has been very usefull to me: The last chapter explains how to install node and npm compiling it.
http://iconof.com/blog/how-to-install-setup-node-js-on-amazon-aws-ec2-complete-guide/#installNode
Get the http://npmjs.org/install.sh file on your system first and then execute it directly instead of piping with curl.
Use chmod +x install.sh to make it executable
Then run ./install.sh
I did it manually. Why mess with installers that break or don't put things where I want them? Such were the problems encountered while installing *node.js" on Amazon Web Services, that a manual install was the easy way to get the result I wanted.
I want a GLOBAL install of node and npm on AWS. By that I mean install should be put in a place like /usr/bin, so that all users have access. Surprisingly, AWS apparently doesn't give support to that idea. AWS encourages using nvm, node version manager, but that seems to always install in a user directory, and not a system level directory. After being frustrated when the "rpm" solutions (mentioned elsewhere) failed, I finally decided to just do the installation manually.
In a browser, go to nodejs.org download page:
https://nodejs.org/en/download/
Find a link that says:
All download options
Click through that; it goes to an index page with a URL like:
https://nodejs.org/dist/v14.16.1/
There I looked for the name that had "linux" and "x86" in the name.
I wrote this down, or select-and-copied, to get the correct spelling.
In my case it was:
node-v14.16.1-linux-x64.tar.gz
Putting the two parts together, I got the following URL:
https://nodejs.org/dist/v14.16.1/node-v14.16.1-linux-x64.tar.gz
So that's what is to be downloaded using curl.
I have a "temp" directory conveniently located in my home dir.
cd ~/temp
The download was accomplished with "curl". Note that the -o option was used to give the output file the name of my choosing. Of course, I chose to give it the same name as the web site file.
curl -o node-v14.16.1-linux-x64.tar.gz https://nodejs.org/dist/v14.16.1/node-v14.16.1-linux-x64.tar.gz
Untar the downloaded file.
tar xf node-v14.16.1-linux-x64.tar.gz
Conveniently, it creates its own directory. Go there.
cd node-v14.16.1-linux-x64 || exit 1;
Observe that the delivery consists of a relatively small number of files and directories (since node_modules is dealt with as a unit).
In my case, I had an old and bad implementation still installed, so the following commands were used to move aside any junk that might happen to be in the way. Some commands errored out because the old junk didn't exist. That's ok, error while moving to -OLD just means there is nothing to move; which is good.
Note: I put all these mv (move) commands into a script file, made it executable, and ran it as sudo. The alternative is to run each line individually as sudo.
mv /usr/bin/node /usr/bin/node-OLD
mv /usr/bin/npm /usr/bin/npm-OLD
mv /usr/bin/npx /usr/bin/npx-OLD
mv /usr/include/node /usr/include/node-OLD
mv /usr/lib/node_modules /usr/lib/node_modules-OLD
mv /usr/share/doc/node /usr/share/doc/node-OLD
mv /usr/share/man/man1/node.1 /usr/share/man/man1/node.1-OLD
mv /usr/share/systemtap/tapset/node.stp /usr/share/systemtap/tapset/node.stp-OLD
An here is the actual install. Remember, this is occurring in the untarred directory, in my case node-v14.16.1-linux-x64.
mv bin/node /usr/bin
mv bin/npm /usr/bin
mv bin/npx /usr/bin
mv include/node /usr/include
mv lib/node_modules /usr/lib
mv share/doc/node /usr/share/doc
mv share/man/man1/node.1 /usr/share/man/man1
mv share/systemtap/tapset/node.stp /usr/share/systemtap/tapset/
That's it, all finished.
Latest version 18 has dependency I think..
node: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.28' not found (required by node)
Finally I got solution by running by running following commands.
sudo apt-get remove nodejs
nvm install 16.15.1
v16.15.1 node version and npm v v16.15.1 is installed.
For same make sure nvm is installed in your machine.
This works for me:
sudo apt install npm
Edit as my answer wasn't pertinent anymore:
Try:
curl --silent --location https://rpm.nodesource.com/setup | bash -
yum -y install nodejs
https://github.com/joyent/node/wiki/Installing-Node.js-via-package-manager#enterprise-linux-and-fedora-core