I try to build Cassandra cluster with 3 nodes
On node 1 i've got a trouble when i try use cqlsh:
Connection error: ('Unable to connect to any servers', {'127.0.0.1': error(111, "Tried connecting to [('127.0.0.1', 9042)]. Last error: Connection refused")})
In cassandra.yaml i dont't see strings with ip 127.0.0.1, i wrote there correct parametres (in my mind)
cluster_name: 'cassandra_cluster'
seeds: "node_public_ip_1,node_public_ip_2,node_public_ip_3"
listen_address: node_public_ip_1
rpc_adress: node_public_ip_1
in cassandra-topology.properties:
`# Cassandra Node IP=Data Center:Rack`
node_public_ip_1=dc1:rac1
node_public_ip_2=dc1:rac1
node_public_ip_3=dc1:rac1
What i do wrong?
Thanks!
When you run cqlsh without specifying the host, it defaults to localhost (127.0.0.1). You need to specify the client IP address (rpc_address) of the node you want to connect to when running cqlsh.
Also, the standard recommendation for multi-homed servers is to use the private IP for internal cluster comms and the public IP for client connections. This means that in cassandra.yaml you would configure:
listen_address: private_ip
rpc_address: public_ip
Since the seeds are used for seeding cluster communication, you would also configure the seeds list with the nodes' private IP addresses.
Finally, if you're using the old PropertyFileSnitch, you should also configure cassandra-topology.properties with the nodes' private IP addresses.
However, PFS is really old and in almost all cases our recommendation is to use GossipingPropertyFileSnitch since it has all the benefits of being able to expand the cluster in the future without any downsides as I've explained in this post -- https://community.datastax.com/questions/8887/.
It is also a lot simpler to manage GPFS since you only need to set a single node's DC and rack configuration in cassandra-rackdc.properties without having to reconfigure all the nodes whenever you add/remove nodes from the cluster.
When you do switch to GPFS, you should delete cassandra-topology.properties on the nodes to prevent any gossip issues in the future as I've explained in this post -- https://community.datastax.com/questions/4621/. Cheers!
Try run the "nodetool status" and "nodetool describecluster" on both nodes of this cluster to identify the IP used by nodes.
and try connect passing the host/ip. like:
cqlsh <host> <port> -u <user> -p <password>
I have built Cassandra server 2.0.3, then run it. It is starting and then stopped with messages:
X:\MyProjects\cassandra\apache-cassandra-2.0.3-src\bin>cassandra.bat >log.txt
java.lang.RuntimeException: Unable to gossip with any seeds
at org.apache.cassandra.gms.Gossiper.doShadowRound(Gossiper.java:1160)
at org.apache.cassandra.service.StorageService.checkForEndpointCollision
(StorageService.java:416)
at org.apache.cassandra.service.StorageService.joinTokenRing(StorageServ
ice.java:608)
at org.apache.cassandra.service.StorageService.initServer(StorageService
.java:576)
at org.apache.cassandra.service.StorageService.initServer(StorageService
.java:475)
at org.apache.cassandra.service.CassandraDaemon.setup(CassandraDaemon.ja
va:346)
at org.apache.cassandra.service.CassandraDaemon.activate(CassandraDaemon
.java:461)
at org.apache.cassandra.service.CassandraDaemon.main(CassandraDaemon.jav
a:504)
What I can change to run it?
I had a similar problem with my cassandra v2.0.4 cluster running a single node.
Check your cassandra.yaml and make sure that your "listen_address" and "seeds" values match, with the exception that the seeds value requires quotes around it.
You might get this problem if your private IP address is different than the public one (like on AWS). For example, the host thinks it's "172.31.0.2" when it's visible as "55.70.33.10".
The solution to this problem is:
listen_address: 172.31.0.2
broadcast_address: 55.70.33.10
in cassandra.yaml
Make sure your cluster_name entry match on all the nodes in the cluster
(you may need to delete your storage if you changed the cluster name)
Verify that all nodes can ping to each other
broadcast_rpc_address and listen_address should be set to local IP
(not localhost or 127.0.0.1)
seeds should point to the IP address of the seed(s)
If you are on AWS and use the Ec2MultiRegionSnitch you will need to set the seeds to the public IP addresses rather than the private IPs.
I had the same problem on Ubuntu 16.04. I'm not sure which of these changes made it work, where XXX.XXX.XXX.XXX is your public facing IP address, below are selections from cassandra.yaml
seed_provider:
# Addresses of hosts that are deemed contact points.
# Cassandra nodes use this list of hosts to find each other and learn
# the topology of the ring. You must change this if you are running
# multiple nodes!
- class_name: org.apache.cassandra.locator.SimpleSeedProvider
parameters:
# seeds is actually a comma-delimited list of addresses.
# Ex: "<ip1>,<ip2>,<ip3>"
- seeds: "XXX.XXX.XXX.XXX"
listen_address: XXX.XXX.XXX.XXX
broadcast_address: XXX.XXX.XXX.XXX
broadcast_rpc_address: XXX.XXX.XXX.XXX
listen_on_broadcast_address: true
start_rpc: true
rpc_address: XXX.XXX.XXX.XXX
I also needed to restart my Virtual Machine for some reason. ¯_(ツ)_/¯
For a quick single node setup on RHEL, I did the following:
Get info about your network interface setup:
# /sbin/ifconfig -a
It will list the interfaces and the ip addresses they are attached to.
Usually it will show an "Ethernet" interface and a "Local Loopback".
Get the associated ip addresses.
Then edit conf/cassandra.yaml:
rpc_address: [Local Loopback address]
broadcast_rpc_address: [Ethernet address]
listen_address: [Local Loopback address]
broadcast_address: [Ethernet address]
listen_on_broadcast_address: true
seed_provider:
- class_name: org.apache.cassandra.locator.SimpleSeedProvider
parameters:
- seeds: "[Ethernet address]"
Then also, open the correct ports on Linux firewall, being 9042, 7000 and 7001. More info about opening ports on Linux here:
http://ask.xmodulo.com/open-port-firewall-centos-rhel.html
in cassandra.yaml, I update the seed from domain name to IP address. and it works.
Happened to me because in my configuration the "intial_token" settings was specified (I think because I just copied to configuration file over from another cluster member). After clearing the data directory, commenting out the setting and restarting the node, it worked fine for me.
I experienced this error today...
I could not find any reason for the error other than timing issues.
I restarted many times and after a while it sticked. It looks like they expect a bi-directional communication on the gossip channel and if it does not happen quickly enough (which looks like a very small amount of time to me) then they drop the line and generate that error.
In my case I just upgraded my software and restarted the computer. So it was clearly not a connection issue between the computers (I have firewalls and SSL, to complicate matters) and the node was connected before... So the one entry I found in that regard from datastax did not apply...
https://support.datastax.com/hc/en-us/articles/209691483-Bootstap-fails-with-Unable-to-gossip-with-any-seeds-yet-new-node-can-connect-to-seed-nodes
I got the same error. There can be more than one solution. Hope my mistake is what you have done.
I had my localhost IP pointing to some domain name (and I did that in order that my Spring boot application's server context is some domain name like www.example.com:8080 instead of localhost:8080, and I had the following entry in my hosts file on Windows system).
127.0.0.1 www.example.com
While my cassandra batch file was looking for localhost which it didn't find. So, I made another entry for localhost too in my hosts file as:
127.0.0.1 localhost
127.0.0.1 www.example.com
After adding it, I opened new command prompt, ran cassandra batch from the cassandra bin directory and it then worked.
Disable the firewall and SELINUX and try again
In our case ssl was enabled, and cassandra.yaml configuration looks fine as per above comments. Then we enabled ssl debugging by by adding below jvm paramter in cassandra-env.sh -Djavax.net.debug=ssl:handshake
After starting the node again we noticed below in cassandra log file
MessagingService-Outgoing-geo2_host/xx.xx.xx.xx, Exception while
waiting for close javax.net.ssl.SSLHandshakeException: Received fatal
alert: certificate_unknown
After further investigating the ssl debug logs we got to know that the certificate was not valid. After fixing this ssl issue node was able to join the cluster.
Thanks to elvingt
His answer just remind me , I need to verify that all node needs to be able to talk to each other.
https://support.datastax.com/hc/en-us/articles/209691483-Bootstap-fails-with-Unable-to-gossip-with-any-seeds-yet-new-node-can-connect-to-seed-nodes
Gossip communications must be bi-directional.
To verify use this commnd, and you need test from BOTH SIDE
nc -vz {your_node_ip} 7000
Then I recollect that I turned on my ubuntu firewall last night. I open it by
sudo ufw allow 7000/tcp
And it is working now
Getting error during startup/bootstrap
Unable to gossip with any seeds
indicates there is some issue with broadcast_address. broadcast_address is responsible for communication with other nodes not with clients.
This address must be set in seed node(mandatory for seed node), If you are using cloud VMs you might have different IPs(public and private) hence its recommended to use your private IPs for broadcast_address this will save your n/w cost as well.
# Address to broadcast to other Cassandra nodes
# Leaving this blank will set it to the same value as listen_address
broadcast_address: 10.11.xx.xxx
In my scenario I was using IBM and once I set broadcast_address in seed nodes issue got resolved.
Please make sure you are starting your seed node first then other node, this order is mandatory.
in cassandra.yaml
changing listen_address value from localhost to domainName solved my issue
I had same issue, I checked port, used tcpdump, netcat to test connections and finally it comes to expired SSL certificates on internode_encryption. I modified internode_encryption to make it 'none', restarted all nodes and it worked.
Before all neighbor nodes were down. And node repair command was failing with:
"Did not get positive replies from all endpoints"
P.S Dont leave internode_encryption as none for a long time, just regenerate certs and enable it back.
I have tried to do necessary configuration to deploy multiple instances of Cassandra on 2 different nodes of multi-node cluster. But the nodes are having trouble seeing each other. Can someone give me an advice how to join a node to my cluster?
To join a node to a cluster, the following need to match-up in the nodes' cassandra.yaml files:
cluster_name
endpoint_snitch
num_tokens
Get your first node running, and make sure the following ports are open on your firewall or internal network:
7000 (gossip)
7001 (if using node-to-node SSL)
7199 (JMX)
9042 (client connections)
On your second node, make sure the second node has the first node's IP address in its seed list. All of your nodes should share the same seed list, as well. Depending on the size of your cluster, you should have two or three per data center.
Example:
# seeds is actually a comma-delimited list of addresses.
- seeds: "192.168.0.100,192.168.0.101"
Once your seed nodes are set, fire-up your second node and it should join. If it doesn't check the system.log for errors.
Problem while Creating cluster using cassandra:-
I follow the below steps for creating a Cassandra cluster:-
1.Installed cassandra in 3 Windows-7 PCs.
PC IPAddress-127.0.0.1,127.0.0.2,127.0.0.3
2.Modified the cassandra.yaml file as below.
cluster_name: 'MyCluster'
num_tokens: 256
seed_provider: - seeds: "127.0.0.1"
listen_address: 127.0.0.1,127.0.0.2,127.0.0.3
rpc_address: 0.0.0.0
3.start the Cassandra in all the above 3 PCs.
but I am not getting more than 1 Node in Node tool. I can see only one node.
I have installed datastax-community-64bit_2.0.3
So, Please help me to solve this problem. I need to create Cassandra cluster.
Thanks in Adavance,
Satya
You have follow all the steps for creating cluster,but you have to define firewall inbound rule for allowing the port.(by default these ports are not allowed by firewall).So after modifying the "cassandra.yaml" file,you have to set the port used in cassandra and datastax in your firewall,then start the cassandra service.
For adding port in firewall:
go to control panel->windows firewall->advanced setting->Inbound Rules->new Rule->select port and add all the ports require for the cassandra/datastax. google the require ports for cassandra/datastax.
The 127.x.x.x IP addresses you are using are all loopback device addresses. Traffic sent to those addresses never leaves your localhost. If you want the three hosts to discover each other you need to use IPs from some private IP address range. See this Wikipedia article for an overview. As your Windows workstations are networked, the IP number to use should be obvious from running ipconfig on the command line on each of the three workstations. Look for the output entry IPv4-Adress.
I'm trying to set up multi node Cassandra cluster in a local network. I applied the instructions [here]: http://wiki.apache.org/cassandra/MultinodeCluster. I have two nodes. Here are my changes in /etc/cassandra/cassandra.yaml:
First node (ip is "192.168.0.59"):
listen_address: 192.168.0.59
rpc_address: 0.0.0.0
seeds:
- 192.168.0.59
Second node (ip is "192.168.0.5"):
auto_bootstrap: true
listen_address: 192.168.0.5
rpc_address: 0.0.0.0
seeds:
- 192.168.0.59
It seems it's not working. I'm trying to connect Cassandra using Cassandra-Cluster-Admin but it fails even if I don't connect second node. I'm also using noip service. Is my configuration correct or is noip causing the problem? Do I need to do any configuration for ports or something in the modem? My server is Ubuntu 11.10 and Cassandra version is 1.0.5.
//Edit
I've figured out the problem and now I can connect to both nodes. The problem was in cassandra.yaml file I was commenting old configurations (listen_address etc.) and inserting new ones. But when I do that, I can't connect Cassandra. It's very strange. Why is that happening?
//Edit
Problem is not comments. I see that I shouldn't use tab inside cassandra.yaml
Try to change ip address in Cassandra-Cluster-Admin
path: cassandra/include/conf.inc.php
chage:
$CASSANDRA_CLUSTERS = array(array('nodes' => array('your ip address:9160'),
'username' => '',
'password' => ''));
I think it may be a solution to your problem.
No tab should be used in cassandra.yaml