I'm having an issue related to team foundation server with Visual Studio 2012.
I've checked in a new solution to the server, however when i get latest version for other machines, most of the references are missing and the .dll files in the bin cannot be located.
Is this because the files are not being pushed when i check in.
Any help is appreciated thanks
In Solution Explorer, right click the DLLs that aren't being included, go to Properties, and be sure that the Build Action is set to "Content".
Check whether you are using MSBuild-Integrated solutions or using Automatic Package Restore. If you use MSBuild-Integrated solutions, migrating MSBuild-Integrated solutions to use Automatic Package Restore.
If you haven't used Nuget to restore package. Check: https://docs.nuget.org/consume/package-restore
Check whether your project link to other projects. Don't reference output assemblies. Make a project reference or create a NuGet package.
Related
I am attempting to convert the Microsoft.Health C# class library that is installed as part of the HealthVault SDK, using instructions provided here. After following these instructions, I get the following error when attempting to load the project into Visual Studio 2013.
"The project is targeting frameworks hat are either not installed or
are included as part of future updates to Visual Studio. See
http://go.microsoft.com/fwlink/?LinkId=287985"
Visiting the link takes me to .NET SDKs and Downloads. Once there, I have no clue on what needs to be done.
I do realize that one will have to leverage the Portable Class Library Contrib project to fill in some missing bits, especially code related to System.Security. This, I will deal with later.
Any one run into a similar problem?
Maybe so late but for those who have the same problem.
I had the same error in a project which was working perfect before updating VS2013 and finally after 3 hours looking for the source of the error I found that the error is about TargetFrameworkProfile.
In my case I sloved it like so:
Right click in the unloaded project in your solution and click Edit.
Find the TargetFrameworkProfile tag and set it as below:
<TargetFrameworkProfile>Profile78</TargetFrameworkProfile>
At a guess, this is because you need to specify the TargetFrameworkVersion and TargetFrameworkProfile properties in the project file. Compare the .csproj you are trying to create to a newly created PCL project file, and make sure that everything that's not specific to your project matches.
I ran into the same issue and got it resolved by installing the latest Visual Studio Update
We have a few projects within our CI environment which have been building successfully. Over the weekend, our IT team installed Azure SDK udpates, and since then, our project to not build anymore (even though they don't reference Azure).
The way we are building projects is
<MSBuild Condition="'$(BuildProject)' != ''" Projects="#(Projects)"
Properties="Platform=$(Platform);Configuration=$(Configuration);OutDir=$(TempProjectFilesPublish)\bin\;WebProjectOutputDir=$(TempProjectFilesPublish)"
Targets="Build"
ContinueOnError="false">
where #(Projects) is a reference to the Solution folder.
<Projects Include="$(BuildProject)"/>
The issue is around resolving project references. Nothing has changed over the weekend. The project references are correct, the csproj file has the appropriate values, no new projects or code changes have been made which is leading me to think something has been disrupted.
Wondering if anyone might know of any changes to MSBuild that would affect this?
This issue ended up being a bug in Azure SDK 2.3 with a conflict to Newtonsoft.JSON dll.
The SDK installs a 4.5 build version into the GAC, which is overriding any Newtonsoft references in projects to 4.0.
https://connect.microsoft.com/VisualStudio/feedback/details/850425/windows-azure-vs-tools-breaking-msbuild-for-web-projects
Microsoft have stated this will be fixed in 2.4.
I experience the same problem with Azure SDK v2.9. I've fixed the build for the moment by uninstalling "Microsoft Azure Library for .NET v2.9".
P.S.: Unfortunately, the link provided in the answer by mickyjtwin no longer works.
P.P.S.: The following question seems to be related:
Visual Studio keeps overwriting NewtonSoft.Json.DLL with an older version
I have such error in vs 2012:
NuGet Package restore failed for project Miscellaneous Files: Value cannot be null or an empty string. Parameter name: root. 0 0
I see that it's a bug https://nuget.codeplex.com/workitem/3780 that was fixed for version 2.8
But I can't find the 2.8 version on https://nuget.codeplex.com
Is it possible to fix the error without the installation of the 2.8 version? Or how to get the 2.8?
I fixed this by deleting the visual studio solution user options file (.suo) and then restarting VS.
UPDATE: For VS 2017, you need to delete a hidden folder named .vs located in solution directory (Thanks #Tien Dinh!)
Had the same issue with VS2013 today.
After running an update on installed packages (tools -> extensions and updates) (which included nuget),
and installing some updates for VS2013 (windows update had some), it has gone away.
So basically, check for those updates, update, and it might solve the issue.
I have VS 2013. According to the extensions manager, nuget was up to date.
Ran a manual install from the vsix site:
http://visualstudiogallery.msdn.microsoft.com/4ec1526c-4a8c-4a84-b702-b21a8f5293ca
... fixed the issue.
A simple restart of Visual Studio should clear everything up. I had the same issue in VS2013 after upgrading Web API. It was not necessary to delete the .suo.
I right clicked the solution and chose "Enable Nuget Package Restore". This fixed the problem.
This link from MSDN shows how:
http://blogs.msdn.com/b/dotnet/archive/2013/06/12/nuget-package-restore-issues.aspx
nuget visual-studio
I fixed this by enabling auto restore on nuget packages in the solution
Not an exact answer, but best I can tell, NuGet ver. 2.8 is not available yet. I have been dealing with the same issue for sometime now (2 months). I was still able to build my solution successfully even with that error by performing the build against the main project. I am really hoping to get this issue resolved because it is a serious eyesore while working.
You can get a non-release version of NuGet 2.8 here. Instructions are here: Installing a CI build. This fix the issue for me on VS2010.
I fixed this issue after clicking the "Clear All Nuget Cache(s)"
Just as a brief note. I got this error by running the project on a mapped network drive i.e. T:\NetworkFolder\Project\Solution.sln.
Obviously the solution is simple - don't do this - copy it onto your machine. Might save someone some pain at some point.
None of the above answers helped for me, and it was getting pretty frustrating.
What worked for me (with Visual Studio Professional 2017, version 15.8.5) was doing the following steps;
1) Tools > Options > NuGet Package Manager > Click 'Clear All NuGet Cache(s)'
Hope this helps someone!
It did not work for me. I had to go to tools, extension manager... Uninstall NuGet
Restart Visual Studio 2010
Download NuGet
Reinstall it.
Restart Visual Studio. Fixed it all!
Let's check the name of packages in file packages.config. Sometime the name incorrect it occurr
I got this error by accidentally renaming one of the namespace id attributes inside packages.config file to something else. I was able to track this down by comparing checked in version of packages.config, with my local one. After I corrected the problem, all I had to do is close the packages.config file, rebuild, and the problem was gone.
In Visual Studio 2015:
Go to Options->NuGet Package Manager-> Package Sources, make sure "Microsoft and .Net" is checked in the Machine-wide package list.
I uninstalled and reinstalled nUnit 3.7.1 and everything started working again. I have a few nuget packages, but nunit 3.7.1 is the only one I reinstalled, I left the rest alone.
After installing Slow Cheeath (v. 2.5.10.3) to two projects in my solution, I am receiving the following error:
"The "SlowCheetah.Xdt.TransformXml" task could not be loaded from the assembly C:\Users
\User\AppData\Local\Microsoft\MSBuild\SlowCheetah\v2.5.10.2\SlowCheetah.Xdt.dll. Could
not load file or assembly 'file:///C:\Users\User\AppData\Local\Microsoft\MSBuild
\SlowCheetah\v2.5.10.2\SlowCheetah.Xdt.dll' or one of its dependencies. The system cannot
find the file specified. Confirm that the <UsingTask> declaration is correct, that the
assembly and all its dependencies are available, and that the task contains a public
class that implements Microsoft.Build.Framework.ITask. ISA.IMPD.FalseAlarm.Web.Portal"
I have removed both projects in their entirety (along with Slow Cheetah), re-installed both projects (along with Slow Cheetah), and Rebuilt the solution to no avail. Can anyone help with this type of error?
In my case the error occured while compiling a web project. The folder
%userprofile%\AppData\Local\Microsoft\MSBuild\SlowCheetah\v2.5.10.2
was empty. All the SlowCheetah components were in SlowCheetah\v1 folder instead. I've copied all files from V1 folder to v2.5.10.2 and everything compiled and transformed fine. To make non web projects compile, I also had to delete V1 folder as suggested by Whoever in this thread.
This was a brand new installation of the SlowCheetah Extension and I did not expect the v1 folder to exist at all. I believe this was a bug in the extension installation for Visual Studio 2012.
delete
AppData\Local\Microsoft\MSBuild\SlowCheetah\v1
I seem to have found to solution to this problem.
Here's what I did:
You need to close Visual Studio, then navigate to:
C:\Users\username\AppData\Local\Microsoft\VisualStudio\11.0\Extensions
Delete the cache file that has the latest date and time
Open Visual Studio and remove Slow Cheetah from the Solution level
Re-install Slow Cheetah from the solution level to the desired projects.
This was failing on our build server, so I changed the revision number from:
<sc-MSBuildLibPathLocal Condition=" '$(sc-MSBuildLibPathLocal)'=='' ">$(LocalAppData)\Microsoft\MSBuild\SlowCheetah\v2.5.10.2\</sc-MSBuildLibPathLocal>
To:
<sc-MSBuildLibPathLocal Condition=" '$(sc-MSBuildLibPathLocal)'=='' ">$(LocalAppData)\Microsoft\MSBuild\SlowCheetah\v2.5.10.3\</sc-MSBuildLibPathLocal>
Why it was pointed to v2.5.10.2 is a mystery, but I'm definitely using v2.5.10.3! Looks like the nuget package itself has the bug in it.
I resolved it like this:
Uninstall slowcheetah => Tools>Extensions and Updates
click OK when VS asks you to restart VS.
in "C:\Users\AppData\Local\Microsoft\MSBuild\SlowCheetah" remove the 'v1' folder (which windows automatically creates when restarting your VS) (here be dragons..)
reïnstall slowcheetah (see step 1) => a new folder v2.5.10.2 will be created.
Again, click OK when he asks to restart
Build your solution
Regards,
Peter
This problem went away for me after using the preview transformation feature in the context menu. Originally suggested here.
FYI this was on VS 2010 Premium.
Having multiple versions can lead to conflicts.
In my case I have installed both Microsoft.VisualStudio.SlowCheetah by Microsoft and SlowCheetah by Sayed Ibrahim Hashimi. After uninstalling the package from Microsoft everything went well.
I have deleted the old files in C:\Users\\AppData\Local\Microsoft\MSBuild\SlowCheetah\v1. I also needed to upgrade Visual Studio 2012 to update 4 to make it work.
I was able to fix this issue by doing the following:
Uninstalling the SlowCheetah extension from the TOOLS > Extensions and Updates... menu
Closing Visual Studio
Deleting all files in the "C:\Users\username\AppData\Local\Microsoft\VisualStudio\11.0\Extensions" folder
Opening Visual Studio
Reinstalling SlowCheetah from the TOOLS > Extensions and Updates... menu (which requires a Visual Studio restart)
This is using Visual Studio 2012 Premium with Update 4 and SlowCheetah version 2.5.10.
If you're getting this error on a TFS Build Server (in my case TFS Express 2013) then you will need to copy over the files from your local machine
C:\Users\SWEAVER\AppData\local\Microsoft\MSBuild\SlowCheetah
on your machine to whichever user your TFS build is running under
C:\users\TFSBuild\AppData\Local\Microsoft\MSBuild\SlowCheetah
Please note AppData is a hidden directory that you may not see, but just type the name and hit enter and it will come up.
I'm using VS2013 so I didn't copy v1 (I think v1 is for VS2012).
The original TFS error I got was :
C:\Builds\1\www.XXXXX.com\RRStore - XXXXX
Silverlight\Sources\RRStore.AdminConsole\Properties\SlowCheetah\SlowCheetah.Transforms.targets
(150): The "SlowCheetah.Xdt.TransformXml" task could not be loaded
from the assembly
C:\Users\TFSBuild\AppData\Local\Microsoft\MSBuild\SlowCheetah\v2.5.10.2\SlowCheetah.Xdt.dll.
Could not load file or assembly
'file:///C:\Users\TFSBuild\AppData\Local\Microsoft\MSBuild\SlowCheetah\v2.5.10.2\SlowCheetah.Xdt.dll'
or one of its dependencies. The system cannot find the file specified.
Confirm that the declaration is correct, that the assembly
and all its dependencies are available, and that the task contains a
public class that implements Microsoft.Build.Framework.ITask.
Fortunately this error told me exactly where to place the files.
I had the same problem in Visual Studio 2013. Just install SlowCheetah NuGet package:
https://www.nuget.org/packages/SlowCheetah
They've released a new version which brings the installation procedure up to date:
https://blogs.msdn.microsoft.com/visualstudio/2017/05/25/whats-new-and-improved-with-the-slowcheetah-extension/
Tired of having to install your NuGet packages manually to get
SlowCheetah to work? We’ve added automatic NuGet installation to help
streamline your process. All you need to install is the latest
extension and SlowCheetah will take care of the rest. When you use
SlowCheetah for the first time in a project, it will prompt you to
install or update NuGet packages. Agree and you’re ready to go!
Close Visual Studio
Install the VISX extension
Open your project.
This version detects if you already have it installed and offers to upgrade.
I would recommend checking in to source control and then doing a compare of your .csproj file to see what changes it made.
It seems whenever a package is installed through nuget TFS doesn't pick up the dlls files for that pacakge and it's becoming a pain working on the project with multiple developers when new DLLs are being added and old ones updated.?
The 'packages' folder is being checked in.
I've searched google and seem to find people with the same problem but no solution.
Is there a solution to this problem?
I would suggest not checking in the packages folder, and instead enable Package Restore.
Check out TFS NuGetter, an integrated NuGet solution into TFS build process.