Searches have suggested that I should add a line at the end of my .bashrc that reads
cd /the/directory
but that doesn't seem to work. Any ideas?
You have to set it in the .babunrc
Doh! Added the line to .zshrc instead and it seems to work fine now.
Related
I feel like I've literally tried everything, but no matter what I add to vimrc, I can't get it to store its annoying .swp files in /tmp. I'm using Ubuntu 16.04. I've obviously looked up this issue extensively, but again, no command I enter seems to work. I always end up with:
E510: Can't make backup file
(add ! to override)
Things I've tried:
set backupdir=$~/tmp//
set directory=$~/tmp//
set backupdir=~/tmp//
set backupdir=$HOME~/tmp//
set backupdir=/tmp//
I mean you name it, I've tried it. So, explicitly, what is the exact code I need to type in vimrc to make it so vim saves it's .swp files in my temporary folder, instead of cluttering my workspace?
Thank you.
Adding the following line to my ~/.vimrc puts .swp files for currently open buffers under /tmp
set directory=/tmp
If you've tried this without issues are you able to verify that vim is reading your vimrc at all?
It appears the issue was I didn't really understand what ~ means. I created a folder called 'tmp' in my home directory, and from there used:
set backupdir=~/tmp//
I want to keep my custom vimrc settings in a file in my Dropbox called vimcustomvimrc.vim
I did some searching and found this http://blog.mojotech.com/a-veterans-vimrc/ line below to put in my .vimrc file so that it will load my custom settings but its not working. can you please help?
file .vimrc contens below
set runtimepath+=~/Dropbox/vim
source ~/Dropbox/vim/vimcustomvimrc.vim
You can maintain your ~/.vimrc under version control using git version control system, for example: I have a .dotfiles repo. In it I have zshrc bashrc and a subfolder called vim. So I made somthing like this...
ln -s ~/.dotfiles/vim ~/.vim
ln -s ~/.dotfiles/vim/vimrc ~/.vimrc
ln -sfvn ~/.dotfiles/zshrc ~/.zshrc
ln -sfvn ~/.dotfiles/bashrc ~/.bashrc
I think is a better solution because you can undo/redo some changes and can also add other good solutions shared on the internet easyly, things like this solution made by Steve Losh, or more specificlly Synchronizing plugins with git submodules and pathogen a great video made by Drew Neil on this matter.
The first line is not needed if you only want to source that specific file; the source line is enough.
The runtimepath option allows you to add or remove directories to the default list of directories where Vim expects to find other default directories and *.vim scripts. If you don't keep any plugin or whatnot in ~/Dropbox/vim/ there's no need to change runtimepath.
Also, there's a lot of bullshit in that article: if I were you I would take it with a grain of salt.
I am on a RedHat csh.
I just modified ~/.cshrc with a wrong path and resulting in an syntax-error.
my shell just not recognize ls or gedit. So, when I again try to modify, it is not again opening with gedit ~/.cshrc.
When I boot the system it is not starting the profile.
I Have the root access and root profile is fine. Can I edit it from root.
Please help me to remove last two lines i have added to /.cshrc, using root-profile so that it works normal as previous.
thanks.
I'm guessing your PATH isn't getting set properly due to the syntax-error in your .cshrc (assumption since you mention ls isn't working). Try the following from your shell:
echo $PATH
echo is a built-in and should always work. If it returns nothing, is empty, or doesn't include a list of paths similar to /bin, /usr/bin, etc ... then your path is indeed incorrect. Use the full path to gedit on the command line like:
/usr/bin/gedit ~/.cshrc
Basically, what I'm trying to do is have VIM search for dictionary/thesaurus results using dictionary.txt and thesaurus.txt in the current working directory.
So what I've tried in vimrc is something like:
set thesaurus=:pwd/thesaurus.txt
without much luck.
Has anyone gotten something like this to work?
:set thesaurus=thesaurus.txt seems to work for me. It's already relative to the current working directory.
You should try with a dot:
set thesaurus=./thesaurus.txt
See :help path.
In Vim, is it possible to change the default location of the user vimrc file, i.e., from $HOME/.vimrc to some other location ?
Another solution might be to create a symlink to you preferred location. I have my .vimrc in $HOME/.vim/.vimrc and symlink to it. This way I can have it in a git repo and backup it.
You must start vim with the command vim -u ./path/to/your/vimrcfile
vim -u NONE is a good way to start Vim without any plugin or customisation.
See :help starting.txt for more information.
The VIMINIT variable is my preferred method. The problem with aliasing vim with the -u flag is that if vim is opened in some way other than from the shell command your configuration won't get pulled in. Setting $VIMINIT does not suffer from this drawback. Check this out for more information.
export VIMINIT='source $MYVIMRC'
export MYVIMRC='~/.vim/vimrc' #or any other location you want
Note that Vim normally sets the MYVIMRC variable, though I'm not sure exactly what it's used for. Based on my testing, using VIMINIT in this fashion will result in it not being automatically set on startup as it would normally be. This is why I'm setting it myself.
This works for neovim too!
On Windows, I have the _vimrc that's in my home directory contain one line, source c:\path\to\my.vimrc.
I have not yet worked out a good way to move the entirety of my vimfiles folder, but that's less critical as it's all stuff I've installed from elsewhere. I.e., it'd be easy to restore if I lost it. (I know that I can change runtimepath but my problem is more coming up with a "good" way to do so.)
Update
After six years I extended slightly from what I mention in the comments below; as I put stuff into 'after' and wanted to just keep rtp clean I got something that has been solid for a while now. Today in my %USERPROFILE%\_vimrc I do hardcode the actual paths to things and it changes on every machine I use (and I basically do the same thing on *nix) but this gets copied around mostly-manually when setting up a new PC. I also have a version which I can use to launch Vim on another connected machine on the network, e.g. a co-worker's machine, so I get my config and all that, but the gist is:
set runtimepath^=E:/dotfiles/vim
set runtimepath+=E:/dotfiles/vim/after
set runtimepath-=~/vimfiles
set runtimepath-=~/vimfiles/after
runtime vimrc
and then %USERPROFILE%\_gvimrc just has one line:
runtime gvimrc
(Both vimrc and gvimrc are in the /dotfiles/vim folder and also on Bitbucket.)
I see two options, depending on your needs.
Have ~/.vimrc import the other location
create an alias in your bashrc alias vim="vim -u otherlocation"
I edited
C:\Program Files\Vim\_vimrc
and changed both the runtimepath and sourced my own .vimrc.
I also use these settings in Cygwin (and have them version controlled). So it's this in practice (added at the bottom of the _vimrc file):
let &runtimepath = 'C:\cygwin\home\cygwinaccount\.vim,' . &runtimepath
source C:\cygwin\home\cygwinaccount\.vimrc
Bliss ! :)
In linux:
You can edit .bashrc or .zshrc startup script and add the following lines to change the default location of .vimrc file
export VIMINIT='source $MYVIMRC'
export MYVIMRC='~/.vim/.vimrc' # Note the . (dot) before vimrc. If that is what you have called it.
I feel like the simplest solution is to just have a single line in ~/.vimrc that loads the vimrc from the other location, i.e.:
source PATH/TO/OTHER/LOCATION/.vimrc