On Azure, I have a two-VM set (both classic), whereby my web application resides on one VM, my database on another. Both map to the same DNS and belong to the same Resource Group, but both are acting as standalone cloud services at the moment. Let me explain: currently the web application communicates with the database over the public DNS. However, I need them to be on the same lan, so I can de-risk security and improve latency.
I know for a fact that they're not part of a virtual network because when I try to affix a static private IP to my database VM, I'm shown the following prompt in the portal:
This virtual machine can't be configured with a static private IP
address because it's not deployed in a virtual network.
How should I proceed to fix this misconfiguration and what should my next concrete step be? The website is live, and I don't want to risk service interruption. Ideally, both VMs should be in the same virtual network, and should communicate with eachother via a static internal IP. Please forgive my ignorance. Any help would be greatly appreciated.
I guess i'll be the bearer of bad news. You have to delete both VMs while keeping the VHDs in the storage account, then recreate the VMs (reattaching the disks) in the Virtual Network.
Since these are Classic VMs you can use the old Portal when re-creating them. You'll find the VHDs under "My Disks" in the VM creation workflow.
Alternatively, just restrict the inbound access with an ACL on the database Endpoint. Allow the VIP of the first VM and deny everything else. This is good enough for almost any scenario, since if your Web Server gets compromised it's game over. It makes no difference how they exfiltrate stuff off your database (over a VNET or over VIP).
Here's the relevant documentation page for setting up Endpoint ACLs:
https://azure.microsoft.com/en-us/documentation/articles/virtual-machines-windows-classic-setup-endpoints/
Related
can anyone explain difference between Azure Application Gateway, Virtual Network Gateway, Virtual WAN, ExpressRoute, Arc and Private Link, please?
It seems to me all services are pretty similar helping with connecting either on-prem to Azure, in-Azure to in-Azure or public to Azure.
They're similar in that they all involve network traffic, but that's pretty much where the similarities end.
Application Gateway is a Layer 7 load balancing service with advanced features like SSL termination. It's used to route client requests to your applications.
Virtual Network Gateway is a VPN gateway for point-to-site (user) and site-to-site (office/datacenter) VPN connections to your own Azure VNETs. This would, for example, allow you to RDP into Azure VMs from your on-prem office using their private IPs.
ExpressRoute is similar to site-to-site, however it doesn't use IpSec tunnels, it's a dedicated, unencrypted connection from your location directly into Microsoft's backbone. (i.e. you don't traverse the public internet). There's no encryption and the connection is faster. This is a service you need to work with a 3rd party internet provider to implement.
Virtual WAN is more like a networking hub where there would be many site-to-site, point-to-site, ExpressRoute, etc... connections spanning a wide area (as the name implies). This would be for large enterpise organizations with many on-prem locations.
Arc is a means of adding your on-prem resources into Azure for management. e.g. you have a physical server somewhere and you want to manage it though ARM/portal.
Azure Private Link is a feature of many Azure services (storage, SQL PaaS, etc..) which allows you to create a private DNS record and assign a private IP address on your internal VNETs. This is used when you want to disable all public network access to a resource and only allow access from within your own VNET.
I have barely scratched the surface of the differences here, but suffice it to say, there are many differences. From this page, you can type the service name into the search and get more specific details on the offering. Hope this helps.
https://learn.microsoft.com/en-us/search/?terms=networking%20in%20azure
I have created a Windows 2016 data center on Microsoft Azure cloud. I also downloaded its RDP file. However, when I am trying to access it from my Organization I get below error. (of course, organization uses proxy/firewall). When I access it from my home internet, I can access the VM successfully.
Currently the networking of the VM has below setting:
Please help to access the azure VM via proxy.
Edit:
Got few great answers. However, being a trainer, I need to keep creating and deleting the VMs on day to day basis, hence requesting network admin to add a particular VM IP to exception list won't help. Is there any other way possible?
Go with Jason's suggestion. Your network admin needs to configure the corresponding rules for the firewall or proxy. What you need to tell the network admin depends on your setup:
If you are dealing with one VM only, then you could either configure the public IP that is assigned to the VM as static and ask the network admin to allow rdp to that IP address, or, alternatively,
if you would like to save costs for the public IP and your organisation's proxy/firewall is capable of working with DNS names, then you could assign a DNS name to the public IP and let the network admin know the DNS name. The DNS name would be something similar to this: myazurevmname.azurelocation.cloudapp.azure.com
If you are planning to access several VM's in Azure, you can either repeat above steps for each of the VM's, however, may want to think about establishing a point-to-site VPN from your local computer which would remove the need for assigning public IP addresses to each of the VM's. The network setup in Azure will be more complex upfront, but it may be worth the effort. However, this will be a separate discussion.
You could set up teamviewer as a service(!) on your VM and then connect to it with teamviewer from your company pc. it'll be a bit laggy but you'll get used to it
Use this tutorial to set up teamviewer
It seems your organization network block it, you should contact your network admin to add it to firewall/proxy.
I've been searching for this for days and finally found most of the answer in this document https://learn.microsoft.com/en-us/azure/app-service-web/app-service-app-service-environment-control-inbound-traffic
It says that you can block ports to your web application service in Azure using a network security group. However, it says I have to keep some ports open.
e.g. "454: Required port used by Azure infrastructure for managing and maintaining App Service Environments via SSL. Do not block traffic to this port. This port is always bound to the public VIP of an ASE."
The question is does this port need to be open to the entire world? One of the options is open to virtual network (what virtual network is this?) I only want it open to the Azure infrastructure. How can I do this? What does VIP of an ASE mean?
Thanks,
Bestist :)
The question is does this port need to be open to the entire world?
It depends on your demand. If you want entire world(Internet) to access your app, you need open it.
what virtual network is this.
An Azure virtual network (VNet) is a representation of your own network in the cloud. It is a logical isolation of the Azure cloud dedicated to your subscription. You can fully control the IP address blocks, DNS settings, security policies, and route tables within this network. More information please refer to this link.
I only want it open to the Azure infrastructure. How can I do this?
Yes, you could do it. You should add Azure data center IP ranges to NSGs.
If you only want your virtual network devices to access your app services, you could configure NSG such as below:
What does VIP of an ASE mean?
VIP:A VIP is the public IP address associated with a VM. More information please refer to this link.
ASE: App Service Environments. More information please refer to this link.
I have created a Virtual Network, when deploying a VM in it, it's unavailable from Internet, and available when I connect via VPN. (And that's what it's supposed to do).
But when I deploy a Cloud Service (and the Cloud Service is correctly deployed in the Virtual Network as I can see it in the VN resources list), it's still available from Internet.
How can I secure the access of a Cloud Service ? I don't want it to be accessible by every one, just by VPN and from dedicated IPs.
Finally I found that by default Cloud Services have EndPoints configured. By adding ACLs to it (http://blogs.msdn.com/b/walterm/archive/2014/04/22/windows-azure-paas-acls-are-here.aspx) I can isolate them into the Virtual Network.
If you do not want the cloud service to be accessible from the Internet, the better way to protect is to remove the endpoints. If you want to ACL the instances at the Virtual Network/Subnet level consider using this article
I have an Azure Cloud Service (Worker Role) that needs to connect to my Azure SQL database and also connect to an external database.
In development the external database was on the public Internet and connectivity was not a problem.
However, the solution now needs to be deployed in a production environment and access to the external database is to be restricted by setting up a Virtual Network.
The Cloud Service, when deployed in the Virtual Network, gets an IP from the subnet, but seems to become inaccessible to the outside world, and is not connecting to the Azure SQL database (I also cannot RDP to it).
This seems to be beyond my level of understanding of networking, but I don't see why it should lose access to its neighbours in the Azure environment.
What am I missing? Do I need to get involved with Endpoints? Is the Virtual Network misconfigured?
Thanks in advance.
Your question is quite vague, in terms that it does describe the whole picture in the best possible way. Let me put my answer based on my understanding about your issue.
First of all - Azure virtual Network is Virtual Network. It is designed to enable secure cross-premisses connectivity with Windows Azure Data Center.
When you deploy a proper PaaS Cloud Service (Worker Role / Web Role) in a Virtual Network, the role instances get IP Addresses allocated from the defined DHCP pool (the VNet Definition).
When you deploy any service in an Azure Virtual Network you have to take care of Name Resolution! Meaning that, if you do not provide a proper DNS Server, your cloud instances will not be able to resolve any address. That includes Azure SQL Database servers. More on Name Resolution can be read here.
Next, but not less important - Azure SQL Database servers are not part of, and, as of March'2013, cannot be added to Azure Virtual Network!
The last statement means that in order for your Worker Role to access Azre SQL Database server, you need to provide a proper DNS server in your Azure Virtual Network.
And lastly, when you deploy a PaaS service into a Virtual Network, in order to access it via Remote Desktop need to:
* Properly enable and configure RDP extension. it will anyway create Input Endpoint. But this is the only way to enable RDP on PaaS right now;
* You could probably enable RDP via PowerShell startup script and access RDP via the VPN tunnel for the Virtual Network - say you configured a Site-to-Site or Point-to-site VPN for your Azure VNet.
Check the building cross-premises Virtual Network guide here.