I want to compare the first 4 columns of file1 and file2. I want to print all lines from file1 + the lines from file2 that are not in file1.
File1:
2435 2 2 7 specification 9-8-3-0
57234 1 6 4 description 0-0 55211
32423 2 44 3 description 0-0 24242
File2:
2435 2 2 7 specification
7624 2 2 1 namecomplete
57234 1 6 4 description
28748 34 5 21 gateway
32423 2 44 3 description
832758 3 6 namecomplete
output:
2435 2 2 7 specification 9-8-3-0
57234 1 6 4 description 0-0 55211
32423 2 44 3 description 0-0 24242
7624 2 2 1 namecomplete
28748 34 5 21 gateway
832758 3 6 namecomplete
I don't understand how to print things that don't match.
You can do it with an awk script like this:
script.awk
FNR == NR { mem[ $1 $2 $3 $4 $5 ] = 1;
print
next
}
{ key = $1 $2 $3 $4 $5
if( ! ( key in mem) ) print
}
And run it like this: awk -f script.awk file1 file2 .
The first part memorizes the first 5 fields, prints the whole line and moves to the next line. This part is exclusively applied to lines from the first file.
The second part is only applied to lines from the second file. It checks if the line is not in mem, in that case the line was not in file1 and it is printed.
Related
I have my two sequencefiles and I have a list of rows/lines of interest from file1. I want to extract the lines with the same linenumber as in file1. The list is just 1 column of numbers.
I tried using awk in a loop, but all I get is an empty file as output file.
My code looks like this:
for i in <listfile>;
do awk -F lnr="$i" 'NR==lnr' <file2> > outputfile
The output file is created but is just empty.
I could not find this question being asked before, but if so sorry for wasting your time
If I understand the question - file 1 has a list of "line numbers" and you desire to print those lines in file2:
awk 'FNR==NR{line[$1]=1;next}{if(line[FNR]==1)print FNR, $0}' file1 file2
Given the input...
for i in {a..z}; do echo $i; done > /tmp/list-1
for i in {z..a}; do echo $i; done > /tmp/list-2
The current line of each file will be stored in FNR, so you can use that.
$ awk -v a=4 -v b=9 'FNR >= a && FNR <= b { print FILENAME, NR, FNR, $0 }' /tmp/list-*
Sample output:
/tmp/list-1 4 4 d
/tmp/list-1 5 5 e
/tmp/list-1 6 6 f
/tmp/list-1 7 7 g
/tmp/list-1 8 8 h
/tmp/list-1 9 9 i
/tmp/list-2 30 4 w
/tmp/list-2 31 5 v
/tmp/list-2 32 6 u
/tmp/list-2 33 7 t
/tmp/list-2 34 8 s
/tmp/list-2 35 9 r
This is probably basic but I am completely new to command-line and using awk.
I have a file like this:
1 RQ22067-0 -9
2 RQ34365-4 1
3 RQ34616-4 1
4 RQ34720-1 0
5 RQ14799-8 0
6 RQ14754-1 0
7 RQ22101-7 0
8 RQ22073-1 0
9 RQ30201-1 0
I want the 0s to change to 1 in column3. And any occurence of 1 and 2 to change to 2 in column3. So essentially only changing numbers in column 3. But I am not changing the -9.
1 RQ22067-0 -9
2 RQ34365-4 2
3 RQ34616-4 2
4 RQ34720-1 1
5 RQ14799-8 1
6 RQ14754-1 1
7 RQ22101-7 1
8 RQ22073-1 1
9 RQ30201-1 1
I have tried using (see below) but it has not worked
>> awk '{gsub("0","1",$3)}1' PRS_with_minus9.pheno.txt > PRS_with_minus9_modified.pheno
>> awk '{gsub("1","2",$3)}1' PRS_with_minus9.pheno.txt > PRS_with_minus9_modified.pheno
Thank you.
With this code in your question:
awk '{gsub("0","1",$3)}1' PRS_with_minus9.pheno.txt > PRS_with_minus9_modified.pheno
awk '{gsub("1","2",$3)}1' PRS_with_minus9.pheno.txt > PRS_with_minus9_modified.pheno
you're running both commands on the same input file and writing their
output to the same output file so only the output of the 2nd script
will be present in the output, and
you're trying to change 0 to 1
first and THEN change 1 to 2 so the $3s that start out as 0 would
end up as 2, you need to change the order of the operations.
This is what you should be doing, using your existing code:
awk '{gsub("1","2",$3); gsub("0","1",$3)}1' PRS_with_minus9.pheno.txt > PRS_with_minus9_modified.pheno
For example:
$ awk '{gsub("1","2",$3); gsub("0","1",$3)}1' file
1 RQ22067-0 -9
2 RQ34365-4 2
3 RQ34616-4 2
4 RQ34720-1 1
5 RQ14799-8 1
6 RQ14754-1 1
7 RQ22101-7 1
8 RQ22073-1 1
9 RQ30201-1 1
The gsub() should also just be sub()s as you only want to perform each substitution once, and you don't need to enclose the numbers in quotes so you could just do:
awk '{sub(1,2,$3); sub(0,1,$3)}1' file
You can check the value of column 3 and then update the field value.
Check for 1 as the first rule because if the first check is for 0, the value will be set to 1 and the next check will set the value to 2 resulting in all 2's.
awk '
{
if($3==1) $3 = 2
if($3==0) $3 = 1
}
1' file
Output
1 RQ22067-0 -9
2 RQ34365-4 2
3 RQ34616-4 2
4 RQ34720-1 1
5 RQ14799-8 1
6 RQ14754-1 1
7 RQ22101-7 1
8 RQ22073-1 1
9 RQ30201-1 1
With your shown samples and ternary operators try following code. Simple explanation would be, checking condition if 3rd field is 1 then set it to 2 else check if its 0 then set it to 0 else keep it as it is, finally print the line.
awk '{$3=$3==1?2:($3==0?1:$3)} 1' Input_file
Generic solution: Adding a Generic solution here, where we can have 3 awk variables named: fieldNumber in which you could mention all field numbers which we want to check for. 2nd one is: existValue which we want to match(in condition) and 3rd one is: newValue new value which needs to be there after replacement.
awk -v fieldNumber="3" -v existValue="1,0" -v newValue="2,1" '
BEGIN{
num=split(fieldNumber,arr1,",")
num1=split(existValue,arr2,",")
num2=split(newValue,arr3,",")
for(i=1;i<=num1;i++){
value[arr2[i]]=arr3[i]
}
}
{
for(i=1;i<=num;i++){
if($arr1[i] in value){
$arr1[i]=value[$arr1[i]]
}
}
}
1
' Input_file
This might work for you (GNU sed):
sed -E 's/\S+/\n&\n/3;h;y/01/12/;G;s/.*\n(.*)\n.*\n(.*)\n.*\n.*/\2\1/' file
Surround 3rd column by newlines.
Make a copy.
Replace all 0's by 1's and all 1's by 2's.
Append the original.
Pattern match on newlines and replace the 3rd column in the original by the 3rd column in the amended line.
Also with awk:
awk 'NR > 1 {s=$3;sub(/1/,"2",s);sub(/0/,"1",s);$3=s} 1' file
1 RQ22067-0 -9
2 RQ34365-4 2
3 RQ34616-4 2
4 RQ34720-1 1
5 RQ14799-8 1
6 RQ14754-1 1
7 RQ22101-7 1
8 RQ22073-1 1
9 RQ30201-1 1
the substitutions are made with sub() on a copy of $3 and then the copy with the changes is assigned to $3.
When you don't like the simple
sed 's/1$/2/; s/0$/1/' file
you might want to play with
sed -E 's/(.*)([01])$/echo "\1$((\2+1))"/e' file
As the title suggests I'm trying to find all rows in an large tsv file, where at least 50% of the columns have a value bigger than a value x using awk.
E.g for x=5:
9 6 7 2 3
0 1 2 7 6
1 3 8 9 10
should return
9 6 7 2 3
1 3 8 9 10
awk to the rescue!
$ awk -v t=5 '{c=0; for(i=1;i<=NF;i++) c+=($i>t)} c/NF>0.5' file
9 6 7 2 3
1 3 8 9 10
Using Perl:
perl -ane '$x = 5; print if #F / 2 <= grep $_ > $x, #F' -- file.tsv
Using an input .tsv file which looks like this:
Num1 Num2 Num3 Num4 Num5
9 6 7 2 3
0 1 2 7 6
1 3 8 9 10
This code will do it in a awk script. I've left comments to see
the form of a script so you can adjust accordingly.
#!/usr/bin/awk -f
# reads from stdin.
# Usage: $ ./bigcols.awk < input1.tsv
# Run at start.
BEGIN {
# print "Start"
# print "TSV setting. Field seperator set to tab."
FS = "\t"
# He wants to find lines with avg greater than var x
x=5
}
# main. Run for each record. This code uses newlines to denote records.
{
# Find lines which are of this form: (skip header)
# #+,
# ie. start with one or more numbers in column 1.
if ($1 ~ /^[0-9]+/) {
the_avg = ($1 + $2 + $3 + $4 + $5)/5
if (the_avg > x) {
print $1, $2, $3, $4, $5
}
}
}
# run at end
#END { print "Stop" }
I would appreciate some help with an awk script, or whatever would do the job.
So, I've got multiple files (the same amount of lines and columns) and I want to do an average of every number in every column (except the first) from all the files. I have got no idea how many columns there are in a file (though i could probably get the number if needed).
filename.1
1 1 2 3 4
2 3 4 5 6
3 2 3 5 6
filename.2
1 3 4 6 6
2 5 6 7 8
3 4 5 7 8
output
1 2 3 5 5
2 4 5 6 7
3 3 4 6 7
I've found this somewhere on here that does it for a single column (as far as I understand it
awk '{a[FNR]+=$2;b[FNR]++;}END{for(i=1;i<=FNR;i++)print i,a[i]/b[i];}' fort.*
So the only? change would be to replace the +=$2 with a cycle over all columns? Is there a way to do that without knowing the exact number of columns?
Thanks.
$ cat tst.awk
{
key[FNR] = $1
for (colNr=2; colNr<=NF; colNr++) {
sum[FNR,colNr] += $colNr
}
}
END {
for (rowNr=1; rowNr<=FNR; rowNr++) {
printf "%s%s", key[rowNr], OFS
for (colNr=2; colNr<=NF; colNr++) {
printf "%s%s", int(sum[rowNr,colNr]/ARGIND+0.5), (colNr<NF ? OFS : ORS)
}
}
}
$ awk -f tst.awk file1 file2
1 2 3 5 5
2 4 5 6 7
3 3 4 6 7
The above uses GNU awk for ARGIND, with other awks just add a line FNR==1{ARGIND++} at the start.
I have two files:
file-1
1 2 3 4
1 2 3 4
1 2 3 4
file-2
0.5
0.5
0.5
Now I want to add column 1 of file-2 to column 3 of file-1
Output
1 2 3.5 4
1 2 3.5 4
1 2 3.5 4
I've tried this, but it does not work correctly:
awk '{print $1, $2, $3+file-2 }' file-2=$1_of_file-2 file-1 > file-3
I know the awk statement is not right but I want to use something like this; can anyone help me?
Your data isn't very exciting…
awk 'FNR == NR { for (i = 1; i <= NF; i++) { line[NR,i] = $i } fields[NR] = NF }
FNR != NR { line[FNR,3] += $1
pad = ""
for (i = 1; i <= fields[FNR]; i++) { printf "%s%s", pad, line[FNR,i]; pad = " " }
printf "\n"
}' file-1 file-2
The first pattern matches the lines in the first file; it saves each field into the pseudo-multidimensional array line, and also records how many fields there are in that line.
The second pattern matches the lines in the second file; it adds the value in column one to column three of the saved data, then prints out all the fields with a space between them, and adds a newline to the end.
Given this (mildly) modified input, the script (saved in file so-25657951.sh) produces the output shown:
$ cat file-1
1 2 3 4
2 3 6 5
3 4 9 6
$ cat file-2
0.1
0.2
0.3
$ bash so-25657951.sh
1 2 3.1 4
2 3 6.2 5
3 4 9.3 6
$
Note that because this slurps the whole of the first file into memory before reading anything from the second file, the input files should not be too large (say sub-gigabyte size). If they're bigger than that, you should probably devise an alternative strategy.
For example, there is a getline function (even in POSIX awk) which could be used to read a line from file 2 for each line in file 1, and you could then simply print the data without needing to accumulate anything:
awk '{ getline add < "file-2"; $3 += add; print }' file-1
This works reasonably cleanly for any size of file (as long as the files have the same number of lines — or, more precisely, as long as file-2 has at least as many lines as file-1).
This may work:
cat f1
1 2 3 4
2 3 6 5
3 4 9 6
cat f2
0.1
0.2
0.3
awk 'FNR==NR {a[NR]=$1;next} {$3+=a[FNR]}1' f2 f1
1 2 3.1 4
2 3 6.2 5
3 4 9.3 6
After I posted it, I do see that its the same as Jaypal posted in a comment.