I've written a program that is suppose to run for a long time and it outputs the progress to stdout, however, under some circumstances it begins to hang and the easiest thing to do is to restart it.
My question is: Is there a way to do something that would kill the process only if it had no output for a specific number of seconds?
I have started thinking about it, and the only thing that comes to mind is something like this:
./application > output.log &
tail -f output.log
then create script which would look at the date and time of the last modification on output.log and restart the whole thing.
But it looks very tedious, and i would hate to go through all that if there were an existing command for that.
As far as I know, there isn't a standard utility to do it, but a good start for a one-liner would be:
timeout=10; if [ -z "`find output.log -newermt #$[$(date +%s)-${timeout}]`" ]; then killall -TERM application; fi
At least, this will avoid the tedious part of coding a more complex script.
Some hints:
Using the find utility to compare the last modification date of the output.log file against a time reference.
The time reference is returned by date utility as the current time in seconds (+%s) since EPOCH (1970-01-01 UTC).
Using bash $[] operation to subtract the $timeout value (10 seconds on the example)
If no output is returned from the above find, then the file wasn't changed for more than 10 seconds. This will trigger a true in the if condition and the killall command will be executed.
You can also set an alias for that, using:
alias kill_application='timeout=10; if [ -z "`find output.log -newermt #$[$(date +%s)-${timeout}]`" ]; then killall -TERM application; fi';
And then use it whenever you want by just issuing the command kill_application
If you want to automatically restart the application without human intervention, you can install a crontab entry to run every minute or so and also issue the application restart command after the killall (Probably you may also want to change the -TERM to -KILL, just in case the application becomes unresponsive to handleable signals).
The inotifywait could help here, it efficiently waits for changes to files. The exit status can be checked to identify if the event (modify) occurred in the specified interval of time.
$ inotifywait -e modify -t 10 output.log
Setting up watches.
Watches established.
$ echo $?
2
Some related info from man:
OPTIONS
-e <event>, --event <event>
Listen for specific event(s) only.
-t <seconds>, --timeout <seconds>
Exit if an appropriate event has not occurred within <seconds> seconds.
EXIT STATUS
2 The -t option was used and an event did not occur in the specified interval of time.
EVENTS
modify A watched file or a file within a watched directory was written to.
Related
I have a python script that'll be checking a queue and performing an action on each item:
# checkqueue.py
while True:
check_queue()
do_something()
How do I write a bash script that will check if it's running, and if not, start it. Roughly the following pseudo code (or maybe it should do something like ps | grep?):
# keepalivescript.sh
if processidfile exists:
if processid is running:
exit, all ok
run checkqueue.py
write processid to processidfile
I'll call that from a crontab:
# crontab
*/5 * * * * /path/to/keepalivescript.sh
Avoid PID-files, crons, or anything else that tries to evaluate processes that aren't their children.
There is a very good reason why in UNIX, you can ONLY wait on your children. Any method (ps parsing, pgrep, storing a PID, ...) that tries to work around that is flawed and has gaping holes in it. Just say no.
Instead you need the process that monitors your process to be the process' parent. What does this mean? It means only the process that starts your process can reliably wait for it to end. In bash, this is absolutely trivial.
until myserver; do
echo "Server 'myserver' crashed with exit code $?. Respawning.." >&2
sleep 1
done
The above piece of bash code runs myserver in an until loop. The first line starts myserver and waits for it to end. When it ends, until checks its exit status. If the exit status is 0, it means it ended gracefully (which means you asked it to shut down somehow, and it did so successfully). In that case we don't want to restart it (we just asked it to shut down!). If the exit status is not 0, until will run the loop body, which emits an error message on STDERR and restarts the loop (back to line 1) after 1 second.
Why do we wait a second? Because if something's wrong with the startup sequence of myserver and it crashes immediately, you'll have a very intensive loop of constant restarting and crashing on your hands. The sleep 1 takes away the strain from that.
Now all you need to do is start this bash script (asynchronously, probably), and it will monitor myserver and restart it as necessary. If you want to start the monitor on boot (making the server "survive" reboots), you can schedule it in your user's cron(1) with an #reboot rule. Open your cron rules with crontab:
crontab -e
Then add a rule to start your monitor script:
#reboot /usr/local/bin/myservermonitor
Alternatively; look at inittab(5) and /etc/inittab. You can add a line in there to have myserver start at a certain init level and be respawned automatically.
Edit.
Let me add some information on why not to use PID files. While they are very popular; they are also very flawed and there's no reason why you wouldn't just do it the correct way.
Consider this:
PID recycling (killing the wrong process):
/etc/init.d/foo start: start foo, write foo's PID to /var/run/foo.pid
A while later: foo dies somehow.
A while later: any random process that starts (call it bar) takes a random PID, imagine it taking foo's old PID.
You notice foo's gone: /etc/init.d/foo/restart reads /var/run/foo.pid, checks to see if it's still alive, finds bar, thinks it's foo, kills it, starts a new foo.
PID files go stale. You need over-complicated (or should I say, non-trivial) logic to check whether the PID file is stale, and any such logic is again vulnerable to 1..
What if you don't even have write access or are in a read-only environment?
It's pointless overcomplication; see how simple my example above is. No need to complicate that, at all.
See also: Are PID-files still flawed when doing it 'right'?
By the way; even worse than PID files is parsing ps! Don't ever do this.
ps is very unportable. While you find it on almost every UNIX system; its arguments vary greatly if you want non-standard output. And standard output is ONLY for human consumption, not for scripted parsing!
Parsing ps leads to a LOT of false positives. Take the ps aux | grep PID example, and now imagine someone starting a process with a number somewhere as argument that happens to be the same as the PID you stared your daemon with! Imagine two people starting an X session and you grepping for X to kill yours. It's just all kinds of bad.
If you don't want to manage the process yourself; there are some perfectly good systems out there that will act as monitor for your processes. Look into runit, for example.
Have a look at monit (http://mmonit.com/monit/). It handles start, stop and restart of your script and can do health checks plus restarts if necessary.
Or do a simple script:
while true
do
/your/script
sleep 1
done
In-line:
while true; do <your-bash-snippet> && break; done
This will restart continuously <your-bash-snippet> if it fails: && break will stop the loop if <your-bash-snippet> stop gracefully (return code 0).
To restart <your-bash-snippet> in all cases:
while true; do <your-bash-snippet>; done
e.g. #1
while true; do openconnect x.x.x.x:xxxx && break; done
e.g. #2
while true; do docker logs -f container-name; sleep 2; done
The easiest way to do it is using flock on file. In Python script you'd do
lf = open('/tmp/script.lock','w')
if(fcntl.flock(lf, fcntl.LOCK_EX|fcntl.LOCK_NB) != 0):
sys.exit('other instance already running')
lf.write('%d\n'%os.getpid())
lf.flush()
In shell you can actually test if it's running:
if [ `flock -xn /tmp/script.lock -c 'echo 1'` ]; then
echo 'it's not running'
restart.
else
echo -n 'it's already running with PID '
cat /tmp/script.lock
fi
But of course you don't have to test, because if it's already running and you restart it, it'll exit with 'other instance already running'
When process dies, all it's file descriptors are closed and all locks are automatically removed.
You should use monit, a standard unix tool that can monitor different things on the system and react accordingly.
From the docs: http://mmonit.com/monit/documentation/monit.html#pid_testing
check process checkqueue.py with pidfile /var/run/checkqueue.pid
if changed pid then exec "checkqueue_restart.sh"
You can also configure monit to email you when it does do a restart.
if ! test -f $PIDFILE || ! psgrep `cat $PIDFILE`; then
restart_process
# Write PIDFILE
echo $! >$PIDFILE
fi
watch "yourcommand"
It will restart the process if/when it stops (after a 2s delay).
watch -n 0.1 "yourcommand"
To restart it after 0.1s instead of the default 2 seconds
watch -e "yourcommand"
To stop restarts if the program exits with an error.
Advantages:
built-in command
one line
easy to use and remember.
Drawbacks:
Only display the result of the command on the screen once it's finished
I'm not sure how portable it is across operating systems, but you might check if your system contains the 'run-one' command, i.e. "man run-one".
Specifically, this set of commands includes 'run-one-constantly', which seems to be exactly what is needed.
From man page:
run-one-constantly COMMAND [ARGS]
Note: obviously this could be called from within your script, but also it removes the need for having a script at all.
I've used the following script with great success on numerous servers:
pid=`jps -v | grep $INSTALLATION | awk '{print $1}'`
echo $INSTALLATION found at PID $pid
while [ -e /proc/$pid ]; do sleep 0.1; done
notes:
It's looking for a java process, so I
can use jps, this is much more
consistent across distributions than
ps
$INSTALLATION contains enough of the process path that's it's totally unambiguous
Use sleep while waiting for the process to die, avoid hogging resources :)
This script is actually used to shut down a running instance of tomcat, which I want to shut down (and wait for) at the command line, so launching it as a child process simply isn't an option for me.
I use this for my npm Process
#!/bin/bash
for (( ; ; ))
do
date +"%T"
echo Start Process
cd /toFolder
sudo process
date +"%T"
echo Crash
sleep 1
done
I am trying to figure out a way to monitor the files I am dumping from my script. If there is no increment seen in child files then kill my script.
I am doing this to free up the resources when not needed. Here is what I think of , but I think my apporch is going to add burden to CPU. Can anyone please suggest more efficent way of doing this?
Below script is suppose to poll in every 15 sec and collect two file size of same file, if the size of the two samples are same then exit.
checkUsage() {
while true; do
sleep 15
fileSize=$(stat -c%s $1)
sleep 10;
fileSizeNew=$(stat -c%s $1)
if [ "$fileSize" == "$fileSizeNew" ]; then
echo -e "[Error]: No activity noted on this window from 5 sec. Exiting..."
kill -9 $$
fi
done
}
And I am planning to call it as follow (in background):
checkUsage /var/log/messages &
I can also get solution if, someone suggest how to monitor tail command and if nothing printing on tail then exit. NOT SURE WHY PEOPLE ARE CONFUSED. End goal of this question is to ,check if the some file is edited in last 15 seconds. If not exit or throw some error.
I have achived this by above script,but I don't know if this is the smartest way of achiveing this. I have asked this question to know views from other if there is any alternative way or better way of doing it.
I would based the check on file modification time instead of size, so something like this (untested code):
checkUsage() {
while true; do
# Test if file mtime is 'second arg' seconds older than date, default to 10 seconds
if [ $(( $(date +"%s") - $(stat -c%Y /var/log/message) )) -gt ${2-10} ]; then
echo -e "[Error]: No activity noted on this window from ${2-10} sec. Exiting..."
return 1
fi
#Sleep 'first arg' second, 15 seconds by default
sleep ${1-15}
done
}
The idea is to compare the file mtime with current time, if it's greater than second argument seconds, print the message and return.
And then I would call it like this later (or with no args to use defaults):
[ checkusage 20 10 ] || exit 1
Which would exit the script with code 1 as when the function return from it's infinite loop (as long as the file is modified)
Edit: reading me again, the target file could be a parameter too, to allow a better reuse of the function, left as an exercise to the reader.
If on Linux, in a local file system (Ext4, BTRFS, ...) -not a network file system- then you could consider inotify(7) facilities: something could be triggered when some file or directory changes or is accessed.
In particular, you might have some incron job thru incrontab(5) file; maybe it could communicate with some other job ...
PS. I am not sure to understand what you really want to do...
I suppose an external programme is modifying /var/log/messages.
If this is the case, below is my script (with minor changes to yours)
#Bash script to monitor changes to file
#!/bin/bash
checkUsage() # Note that U is in caps
{
while true
do
sleep 15
fileSize=$(stat -c%s $1)
sleep 10;
fileSizeNew=$(stat -c%s $1)
if [ "$fileSize" == "$fileSizeNew" ]
then
echo -e "[Notice : ] no changes noted in $1 : gracefully exiting"
exit # previously this was kill -9 $$
# changing this to exit would end the program gracefully.
# use kill -9 to kill a process which is not under your control.
# kill -9 sends the SIGKILL signal.
fi
done
}
checkUsage $1 # I have added this to your script
#End of the script
Save the script as checkusage and run it like :
./checkusage /var/log/messages &
Edit :
Since you're looking for better solutions I would suggest inotifywait, thanks for the suggestion from the other answerer.
Below would be my code :
while inotifywait -t 10 -q -e modify $1 >/dev/null
do
sleep 15 # as you said the polling would happen in 15 seconds.
done
echo "Script exited gracefully : $1 has not been changed"
Below are the details from the inotifywait manpage
-t <seconds>, --timeout <seconds> Exit if an appropriate event has not occurred within <seconds> seconds. If <seconds> is zero (the default),
wait indefinitely for an event.
-e <event>, --event <event> Listen for specific event(s) only. The events which can be listened for are listed in the EVENTS section.
This option can be specified more than once. If omitted, all events
are listened for.
-q, --quiet If specified once, the program will be less verbose. Specifically, it will not state when it has completed establishing all
inotify watches.
modify(Event) A watched file or a file within a watched directory was
written to.
Notes
You might have to install the inotify-tools first to make use of the inotifywait command. Check the inotify-tools page at Github.
I have a python script that'll be checking a queue and performing an action on each item:
# checkqueue.py
while True:
check_queue()
do_something()
How do I write a bash script that will check if it's running, and if not, start it. Roughly the following pseudo code (or maybe it should do something like ps | grep?):
# keepalivescript.sh
if processidfile exists:
if processid is running:
exit, all ok
run checkqueue.py
write processid to processidfile
I'll call that from a crontab:
# crontab
*/5 * * * * /path/to/keepalivescript.sh
Avoid PID-files, crons, or anything else that tries to evaluate processes that aren't their children.
There is a very good reason why in UNIX, you can ONLY wait on your children. Any method (ps parsing, pgrep, storing a PID, ...) that tries to work around that is flawed and has gaping holes in it. Just say no.
Instead you need the process that monitors your process to be the process' parent. What does this mean? It means only the process that starts your process can reliably wait for it to end. In bash, this is absolutely trivial.
until myserver; do
echo "Server 'myserver' crashed with exit code $?. Respawning.." >&2
sleep 1
done
The above piece of bash code runs myserver in an until loop. The first line starts myserver and waits for it to end. When it ends, until checks its exit status. If the exit status is 0, it means it ended gracefully (which means you asked it to shut down somehow, and it did so successfully). In that case we don't want to restart it (we just asked it to shut down!). If the exit status is not 0, until will run the loop body, which emits an error message on STDERR and restarts the loop (back to line 1) after 1 second.
Why do we wait a second? Because if something's wrong with the startup sequence of myserver and it crashes immediately, you'll have a very intensive loop of constant restarting and crashing on your hands. The sleep 1 takes away the strain from that.
Now all you need to do is start this bash script (asynchronously, probably), and it will monitor myserver and restart it as necessary. If you want to start the monitor on boot (making the server "survive" reboots), you can schedule it in your user's cron(1) with an #reboot rule. Open your cron rules with crontab:
crontab -e
Then add a rule to start your monitor script:
#reboot /usr/local/bin/myservermonitor
Alternatively; look at inittab(5) and /etc/inittab. You can add a line in there to have myserver start at a certain init level and be respawned automatically.
Edit.
Let me add some information on why not to use PID files. While they are very popular; they are also very flawed and there's no reason why you wouldn't just do it the correct way.
Consider this:
PID recycling (killing the wrong process):
/etc/init.d/foo start: start foo, write foo's PID to /var/run/foo.pid
A while later: foo dies somehow.
A while later: any random process that starts (call it bar) takes a random PID, imagine it taking foo's old PID.
You notice foo's gone: /etc/init.d/foo/restart reads /var/run/foo.pid, checks to see if it's still alive, finds bar, thinks it's foo, kills it, starts a new foo.
PID files go stale. You need over-complicated (or should I say, non-trivial) logic to check whether the PID file is stale, and any such logic is again vulnerable to 1..
What if you don't even have write access or are in a read-only environment?
It's pointless overcomplication; see how simple my example above is. No need to complicate that, at all.
See also: Are PID-files still flawed when doing it 'right'?
By the way; even worse than PID files is parsing ps! Don't ever do this.
ps is very unportable. While you find it on almost every UNIX system; its arguments vary greatly if you want non-standard output. And standard output is ONLY for human consumption, not for scripted parsing!
Parsing ps leads to a LOT of false positives. Take the ps aux | grep PID example, and now imagine someone starting a process with a number somewhere as argument that happens to be the same as the PID you stared your daemon with! Imagine two people starting an X session and you grepping for X to kill yours. It's just all kinds of bad.
If you don't want to manage the process yourself; there are some perfectly good systems out there that will act as monitor for your processes. Look into runit, for example.
Have a look at monit (http://mmonit.com/monit/). It handles start, stop and restart of your script and can do health checks plus restarts if necessary.
Or do a simple script:
while true
do
/your/script
sleep 1
done
In-line:
while true; do <your-bash-snippet> && break; done
This will restart continuously <your-bash-snippet> if it fails: && break will stop the loop if <your-bash-snippet> stop gracefully (return code 0).
To restart <your-bash-snippet> in all cases:
while true; do <your-bash-snippet>; done
e.g. #1
while true; do openconnect x.x.x.x:xxxx && break; done
e.g. #2
while true; do docker logs -f container-name; sleep 2; done
The easiest way to do it is using flock on file. In Python script you'd do
lf = open('/tmp/script.lock','w')
if(fcntl.flock(lf, fcntl.LOCK_EX|fcntl.LOCK_NB) != 0):
sys.exit('other instance already running')
lf.write('%d\n'%os.getpid())
lf.flush()
In shell you can actually test if it's running:
if [ `flock -xn /tmp/script.lock -c 'echo 1'` ]; then
echo 'it's not running'
restart.
else
echo -n 'it's already running with PID '
cat /tmp/script.lock
fi
But of course you don't have to test, because if it's already running and you restart it, it'll exit with 'other instance already running'
When process dies, all it's file descriptors are closed and all locks are automatically removed.
You should use monit, a standard unix tool that can monitor different things on the system and react accordingly.
From the docs: http://mmonit.com/monit/documentation/monit.html#pid_testing
check process checkqueue.py with pidfile /var/run/checkqueue.pid
if changed pid then exec "checkqueue_restart.sh"
You can also configure monit to email you when it does do a restart.
if ! test -f $PIDFILE || ! psgrep `cat $PIDFILE`; then
restart_process
# Write PIDFILE
echo $! >$PIDFILE
fi
watch "yourcommand"
It will restart the process if/when it stops (after a 2s delay).
watch -n 0.1 "yourcommand"
To restart it after 0.1s instead of the default 2 seconds
watch -e "yourcommand"
To stop restarts if the program exits with an error.
Advantages:
built-in command
one line
easy to use and remember.
Drawbacks:
Only display the result of the command on the screen once it's finished
I'm not sure how portable it is across operating systems, but you might check if your system contains the 'run-one' command, i.e. "man run-one".
Specifically, this set of commands includes 'run-one-constantly', which seems to be exactly what is needed.
From man page:
run-one-constantly COMMAND [ARGS]
Note: obviously this could be called from within your script, but also it removes the need for having a script at all.
I've used the following script with great success on numerous servers:
pid=`jps -v | grep $INSTALLATION | awk '{print $1}'`
echo $INSTALLATION found at PID $pid
while [ -e /proc/$pid ]; do sleep 0.1; done
notes:
It's looking for a java process, so I
can use jps, this is much more
consistent across distributions than
ps
$INSTALLATION contains enough of the process path that's it's totally unambiguous
Use sleep while waiting for the process to die, avoid hogging resources :)
This script is actually used to shut down a running instance of tomcat, which I want to shut down (and wait for) at the command line, so launching it as a child process simply isn't an option for me.
I use this for my npm Process
#!/bin/bash
for (( ; ; ))
do
date +"%T"
echo Start Process
cd /toFolder
sudo process
date +"%T"
echo Crash
sleep 1
done
I want to run a cron job every minute that will launch a script. Simple enough there. However, I need to make sure that not more than X number (defined in the script) of instances are ever running. These are queue workers, so if at any minute interval 6 workers are still active, then I would not launch another instance. The script simply launches a PHP script which exits if no job available. Right now I have a shell script that perpetually launches itself every 10 seconds after exit... but there are long periods of time where there are no jobs, and a minute delay is fine. Eventually I would like to have two cron jobs for peak and off-peak, with different intervals.
Make sure you have unique script name.
Then check if 6 instances are already running
if [ $(pgrep '^UNIQUE_SCIPT_NAME$' -c) -lt 6 ]
then
# start my script
else
# do not start my script
fi
I'd say that if you want to iterate as often as every minute, then a process like your current shell script that relaunches itself is what you actually want to do. Just increase the delay from 10 seconds to a minute.
That way, you can also more easily control your delay for peak and off-peak, as you wanted. It would be rather elegant to simply use a shorter delay if the script found something to do the last time it was launched, or a longer delay if it did not find anything.
You could use a script like OneAtATime to guard against multiple simultaneous executions.
This is what i am using in my shell scripts:
echo -n "Checking if job is already running... "
me=`basename $0`
running=$(ps aux | grep ${me} | grep -v .log | grep -v grep | wc -l)
if [ $running -gt 1 ];
then
echo "already running, stopping job"
exit 1
else
echo "OK."
fi;
The command you're looking for is in line 3. Just replace $(me) with your php script name. In case you're wondering about the grep .log part: I'm piping the output into a log file, whose name partially contains the script name, so this way i'm avoiding it to be double-counted.
I have a python script that'll be checking a queue and performing an action on each item:
# checkqueue.py
while True:
check_queue()
do_something()
How do I write a bash script that will check if it's running, and if not, start it. Roughly the following pseudo code (or maybe it should do something like ps | grep?):
# keepalivescript.sh
if processidfile exists:
if processid is running:
exit, all ok
run checkqueue.py
write processid to processidfile
I'll call that from a crontab:
# crontab
*/5 * * * * /path/to/keepalivescript.sh
Avoid PID-files, crons, or anything else that tries to evaluate processes that aren't their children.
There is a very good reason why in UNIX, you can ONLY wait on your children. Any method (ps parsing, pgrep, storing a PID, ...) that tries to work around that is flawed and has gaping holes in it. Just say no.
Instead you need the process that monitors your process to be the process' parent. What does this mean? It means only the process that starts your process can reliably wait for it to end. In bash, this is absolutely trivial.
until myserver; do
echo "Server 'myserver' crashed with exit code $?. Respawning.." >&2
sleep 1
done
The above piece of bash code runs myserver in an until loop. The first line starts myserver and waits for it to end. When it ends, until checks its exit status. If the exit status is 0, it means it ended gracefully (which means you asked it to shut down somehow, and it did so successfully). In that case we don't want to restart it (we just asked it to shut down!). If the exit status is not 0, until will run the loop body, which emits an error message on STDERR and restarts the loop (back to line 1) after 1 second.
Why do we wait a second? Because if something's wrong with the startup sequence of myserver and it crashes immediately, you'll have a very intensive loop of constant restarting and crashing on your hands. The sleep 1 takes away the strain from that.
Now all you need to do is start this bash script (asynchronously, probably), and it will monitor myserver and restart it as necessary. If you want to start the monitor on boot (making the server "survive" reboots), you can schedule it in your user's cron(1) with an #reboot rule. Open your cron rules with crontab:
crontab -e
Then add a rule to start your monitor script:
#reboot /usr/local/bin/myservermonitor
Alternatively; look at inittab(5) and /etc/inittab. You can add a line in there to have myserver start at a certain init level and be respawned automatically.
Edit.
Let me add some information on why not to use PID files. While they are very popular; they are also very flawed and there's no reason why you wouldn't just do it the correct way.
Consider this:
PID recycling (killing the wrong process):
/etc/init.d/foo start: start foo, write foo's PID to /var/run/foo.pid
A while later: foo dies somehow.
A while later: any random process that starts (call it bar) takes a random PID, imagine it taking foo's old PID.
You notice foo's gone: /etc/init.d/foo/restart reads /var/run/foo.pid, checks to see if it's still alive, finds bar, thinks it's foo, kills it, starts a new foo.
PID files go stale. You need over-complicated (or should I say, non-trivial) logic to check whether the PID file is stale, and any such logic is again vulnerable to 1..
What if you don't even have write access or are in a read-only environment?
It's pointless overcomplication; see how simple my example above is. No need to complicate that, at all.
See also: Are PID-files still flawed when doing it 'right'?
By the way; even worse than PID files is parsing ps! Don't ever do this.
ps is very unportable. While you find it on almost every UNIX system; its arguments vary greatly if you want non-standard output. And standard output is ONLY for human consumption, not for scripted parsing!
Parsing ps leads to a LOT of false positives. Take the ps aux | grep PID example, and now imagine someone starting a process with a number somewhere as argument that happens to be the same as the PID you stared your daemon with! Imagine two people starting an X session and you grepping for X to kill yours. It's just all kinds of bad.
If you don't want to manage the process yourself; there are some perfectly good systems out there that will act as monitor for your processes. Look into runit, for example.
Have a look at monit (http://mmonit.com/monit/). It handles start, stop and restart of your script and can do health checks plus restarts if necessary.
Or do a simple script:
while true
do
/your/script
sleep 1
done
In-line:
while true; do <your-bash-snippet> && break; done
This will restart continuously <your-bash-snippet> if it fails: && break will stop the loop if <your-bash-snippet> stop gracefully (return code 0).
To restart <your-bash-snippet> in all cases:
while true; do <your-bash-snippet>; done
e.g. #1
while true; do openconnect x.x.x.x:xxxx && break; done
e.g. #2
while true; do docker logs -f container-name; sleep 2; done
The easiest way to do it is using flock on file. In Python script you'd do
lf = open('/tmp/script.lock','w')
if(fcntl.flock(lf, fcntl.LOCK_EX|fcntl.LOCK_NB) != 0):
sys.exit('other instance already running')
lf.write('%d\n'%os.getpid())
lf.flush()
In shell you can actually test if it's running:
if [ `flock -xn /tmp/script.lock -c 'echo 1'` ]; then
echo 'it's not running'
restart.
else
echo -n 'it's already running with PID '
cat /tmp/script.lock
fi
But of course you don't have to test, because if it's already running and you restart it, it'll exit with 'other instance already running'
When process dies, all it's file descriptors are closed and all locks are automatically removed.
You should use monit, a standard unix tool that can monitor different things on the system and react accordingly.
From the docs: http://mmonit.com/monit/documentation/monit.html#pid_testing
check process checkqueue.py with pidfile /var/run/checkqueue.pid
if changed pid then exec "checkqueue_restart.sh"
You can also configure monit to email you when it does do a restart.
if ! test -f $PIDFILE || ! psgrep `cat $PIDFILE`; then
restart_process
# Write PIDFILE
echo $! >$PIDFILE
fi
watch "yourcommand"
It will restart the process if/when it stops (after a 2s delay).
watch -n 0.1 "yourcommand"
To restart it after 0.1s instead of the default 2 seconds
watch -e "yourcommand"
To stop restarts if the program exits with an error.
Advantages:
built-in command
one line
easy to use and remember.
Drawbacks:
Only display the result of the command on the screen once it's finished
I'm not sure how portable it is across operating systems, but you might check if your system contains the 'run-one' command, i.e. "man run-one".
Specifically, this set of commands includes 'run-one-constantly', which seems to be exactly what is needed.
From man page:
run-one-constantly COMMAND [ARGS]
Note: obviously this could be called from within your script, but also it removes the need for having a script at all.
I've used the following script with great success on numerous servers:
pid=`jps -v | grep $INSTALLATION | awk '{print $1}'`
echo $INSTALLATION found at PID $pid
while [ -e /proc/$pid ]; do sleep 0.1; done
notes:
It's looking for a java process, so I
can use jps, this is much more
consistent across distributions than
ps
$INSTALLATION contains enough of the process path that's it's totally unambiguous
Use sleep while waiting for the process to die, avoid hogging resources :)
This script is actually used to shut down a running instance of tomcat, which I want to shut down (and wait for) at the command line, so launching it as a child process simply isn't an option for me.
I use this for my npm Process
#!/bin/bash
for (( ; ; ))
do
date +"%T"
echo Start Process
cd /toFolder
sudo process
date +"%T"
echo Crash
sleep 1
done