I use vim in xterms on Arch linux. Wanting to automatically set marks for subsequent command ranges I wrote this mapping
map <LeftMouse> mp:let g:oc=g:nc<cr>:let g:nc=getpos('.')<cr>:call setpos("'o", g:oc)<cr>:call cursor(g:nc[1], g:nc[2])<cr>
but now the mouse no longer places the cursor at the clicked location. How can I keep standard mouse function, and add to it rather than replacing it?
It seems its not possible to modify LeftMouse, but you can achieve the effect of it using LeftRelease. So my mapping does what I want as
nmap <LeftRelease> mp:let g:oc=g:nc<cr>:let g:nc=getpos('.')<cr>:call setpos("'o", g:oc)<cr>
and the standard function of is unchanged.
You can :set mouse=a for using visual select mode. (This is not what you wanted but it is a trick).
Then, click on text, you will see that it is getting selected. Then, you can release it.
A mapping like
:map gv ma
will set the last recently selected text as mark a.
Other way:
Instead of :set mouse=a, you can press v and then select a letter or a word, depending upon your convenience and then ma for marking it as mark a.
A short mapping for it will be
:map vly ma
Related
The following items are useful to me in editing text, and I was wondering if vim had something for this built out of the box (though I didn't see it on the https://vimhelp.org/index.txt.html#index.txt page), or I had to create mappings for it:
Forward-delete a character. This is X in normal mode.
Forward-delete all text to the right of the cursor on the line. This is the inverse of ctrl-u.
Are either of these mappings available? And if not, are there 'standard' mappings for this that are common (for example, how it might be done in another unix program).
Note that this is the keyboard I have -- there is only one delete key (which acts like a normal backspace key) and there is no backspace key:
Note: for forward-delete, I am currently mapping ctrl-d as:
"Ctrl-d to forward-delete when in insert or command mode
noremap! <C-d> <Delete>
However, this interferes with the tab in insert mode (which I don't use) and the help-options in command mode (which I do use!) so I may have to modify this later, or hopefully someone suggests a better solution.
though I didn't see it on the https://vimhelp.org/index.txt.html#index.txt page
If you can't find it in the documentation, then it doesn't exist.
You can use fn+delete for "Forward-delete a character".
"Forward-delete all text to the right of the cursor on the line" is ctrl+k in MacOS, but Vim has its own use for that combo, :help i_ctrl-k so it is up to you to create a mapping for it.
Something like:
inoremap <key> <C-o>ld$
I want to map a key so that it will do the following actions in Vim. Suppose I am editing a file; I want it set up so that if I press F2, I will accomplish the same thing I would if I did the following:
press ESC
type colon (:)
type w
press Enter
press ESC again
type i to go back to insert mode
Is this possible?
Yes it's possible, but it doesn't do what you want if the cursor is at the end of line.
To get file saved on F2 in insert mode, use the following mapping:
:imap <F2> <C-O>:w<CR>
Literal answer: Yes. You can use this:
:inoremap <F2> <Esc>:w<CR>I
but it won’t do exactly what you want (the cursor will be at the wrong place).
Anton beat me to the less literal (but correct) answer.
The best answer, though, is this: Don't use Vim incorrectly. You should never spend so much time in insert mode that you need a shortcut to get out of it, save the file, and then get back in. With all other editors, you’re in “insert mode” all the time, and only temporarily pop into a menu or dialog or whatever; in Vim, you should learn to reverse this. Only pop into insert mode to edit or add something; never use arrow keys to move the cursor while in insert mode; spend the majority of your time in command (normal) mode, and after a bit of adjustment to the new paradigm, you will find that your editing speed has increased.
Writing the mapping is almost easier than your description.
First, you need to determine from which mode the mapping will be used, because that determines what :map variant you will use. You’ll probably want to use this in insert mode, so you’ll use :inoremap.
The format of the mapping is:
:..noremap {keys} {rhs}
You want <F2> (see :help key-notation) for keys. For {rhs}, just concatenate the keys listed in your description.
To persist the mapping, add it to ~/.vimrc. (See :help vimrc.)
P.S. The alternative given by Anton Kovalenko is probably better for what you’re trying to do, but here I’ve given you the general recipe for future key mappings.
I have a two part question regarding mouse clicks on gvim.
1.) I would like to change my gvim double left mouse click into something similar to the windows environment (ie Notepad, Microsoft Word), wherein it: highlights the current word, and replaces it with whatever I type. This is akin to pressing 'cw' for changeword in vim.
2.) I would like my single mouse click to place a cursor upon the selected text and enter insert mode. Again like how a mouse normally behaves in Windows.
1) nmap <2-LeftMouse> ciw
You could use viw here, which will visually select the current word, but then you will still have to press c to replace it.
2) nmap <LeftMouse> <Leftmouse>i
Or replace the i with an a if you would prefer to append, rather than insert.
You can use behave mswin or so $VIMRUNTIME/mswin.vim so set up a lot of stuff so that it works more like a regular windows program.
The specific setting you are looking for are:
set select=mouse
this causes the mouse to start select mode instead of visual mode. Select mode causes the selection to be deleted and insert mode to be entered when a printable key is pressed.
As in Prince Goulash's answer
nmap <LeftMouse> <LeftMouse>i
will turn on a sort of click-to-type mode.
Using macvim, when I copy a text selection, it always includes the character under the cursor.
For example, if the cursor is at the far left and I press shift-down arrow, it selects the entire line plus the first character of the next line (since the cursor is sitting over the next line's first character).
Is there a way to configure macvim to not include the cursor character in text selections?
Take a look at the selection option. By default it's set to inclusive, but you can change it to exclusive to make text selections act the way you want:
:set selection=exclusive
You can also set it to exclusive with the behave command:
:behave mswin
This also sets several other options, however, which may or may not be what you want. See the Vim help for the specifics.
:help :behave
:help 'selection'
I am guessing that shift-down arrow activates visual character mode, and moves the cursor down a line. If you are trying to select entire lines, you would be better off using visual line mode, which is activated from normal mode by pressing V (shift-v). This will select the current line in its entirety. You can then extend your selection to include the lines above and below using the k (or up arrow) and j (or down arrow) keys.
When using Vim, I think it is better to go with the grain rather than to fight against it. Don't expect it to work the same way as other text editors. Accept that the Vim way is different.
I use vim (Actually gvim on windows) as my main text editor. In my work flow I have to copy sentences to/from various external sources, therefore I use clipboard=unnamed to save me key strokes (p instead of "*p).
I copy text from an outer source and I want to paste it over two different places in vim. I mark the first one (v) and then use p to paste over it. The problem is that at this point I lose the original buffer and can't paste it in the second place. It does not exist in the unnamed buffer, the * buffer or the numbered buffers. My guess is that pasting over selection is putting the "pasted over" text in the unnamed buffer.
How can I paste my original string in two locations? i.e. prevent it from getting lost from the buffers.
Thanks.
Try this:
:vmap p "_xP
vmap means to make a mapping that only applies in visual mode.
p is the key to create the mapping for.
"_ is the black hole register. This is used in any situation where you want to delete text without affecting any registers.
xP means delete the selected text, then paste before the resulting cursor position.
You could set up a mapping to ease your pain:
:vmap <F5> "zxP
This will delete the visually selected text, but put it in a different register, so the clipboard isn't affected. Change <F5> to whatever is easiest for you.
I don't know if I misunderstand you but I tried what you are doing and I have no problem in doing that with the + drop-register.
My workflow:
copy a sentence in an external application (ie. browser)
visual select a sentence in vim and replaced it with "+p or p (with clipboard=unnamed set)
visually select another sentence and replace it with "+p
Sadly when pasting the second time you have to explicitly paste from the + register. Therefore I would recommend a mapping for p/P instead of using clipboard=unnamed
nmap p "+p
Try using
:registers
to see the contents of the different registers.
I don't know how to do that on Windows. With KDE, the clipboard has a history that you can select from, so you could do the paste, select the previous selection from the clipboard, and paste in the new location.
That said, it sounds like it might make more sense for you to have it in only one location, then write a script to take that input and create the output you need. Can you elaborate more on what it is you are trying to accomplish?
Check the value of the 'guioptions' options. Make sure the 'a' flag is not set. Also, check that the 'clipboard' option and verify that neither the 'unnamed' or 'autoselect' flags are set.
:set go-=a
:set clipboard-=unnamed