I have an excel problem. column a contains values EG $123, €123 and £123.
I want to add a column that will search for the currency symbol then multiply the £ by 1.49 and the € + $ by 1. any ideas?
Thanks
If you take the help of a helper column then first we can identify
the currency by the UDF placed in the code section.. I have identified currency in column C while Column A Contains the formatted currency values.
In column B, I did the simple multiplication as I know as per my
experience that currency format does not come into picture. Formula
used in B2 is =A2*$F$1It is for testing purposes only.
Then in Column D2, I used the Nested IF formula and compared
currency value in column C2 to Currency value in E1 which was Symbol
inserted for true and correct recognition. The following formula is
to be entered into Cell D2 and then copied down. It takes care of 3
currencies in Nested IF statement.
=IF(C2="$",A2*$F$1,IF(C2="€",A2*$F$1,A2*$F$3))
UDF
Function GetCurrency(Rng As Range) As String
If IsNumeric(Left(Rng.Text, 1)) Then
GetCurrency = ""
Else
GetCurrency = Left(Rng.Text, 1)
End If
Snapshot of sample data and results is placed below.
[![snapshot showing data and results][1]][1]
Related
I need to sum the result of a formula, repeated several times, which has a single value that changes from 1 to 180.The final formula must be contained in a single cell.
Column A contains values from 1 to 180 (to simplify in the example I have only put 13).
Cell B1 contains a value expressed as a percentage.
Column C (C1 to C13) contains the following formula (cell C1 in the example):
=+((1/(1+(A1*1/12*$B$1)))).
Cell C14 contains the sum of all results.
By defining X the variable value of column A, the formula is in practice the following:
Column A will be not present in my sheet, so therefore I cannot refer my formula to the contents of any cell.
My need is to have only two cells in my sheet: B1, with the rate value; and C1, with the sum of the products with X from 1 to 180. That is what is contained in cell C14.
Thanks for your help and for your patience with my bad English.
This can be done using SUMPRODUCT:
=SUMPRODUCT(1/(1+(A1:A13*1/12*$B$1)))
You can use the SEQUENCE() function for your problem to replace the column A in your example.
More specifically, you can write the formula:
=1/(1+SEQUENCE(180)/12*B1)
which will automatically create an array with a length of 180 cells returning your desired series of values.
If you don't want to 'print' out that series at all but only show the sum right away, simply enclose the formula with the SUM() function:
=SUM(1/(1+SEQUENCE(180)/12*B1))
I need to compare the date of a cell against a column that has multiple date and I see which one it matches and get the associated value. Here I put an image to explain myself better:
Column D is where I need to put the formula, which compares the dates in column A on sheet 1 with the dates in column A on sheet 2. If it matches, I need to multiply the values in column C on sheet 1 by the values in column B of sheet 2.
Here another image with an example to be clearer
I have a little idea that would be something like:
= YES (ERROR (MATCH (Sheet1! A4; Sheet2! A2: A32; 0)); Sheet1! C4 * X
In the x it should go B3, but I don't know how to get that cell in the search above.
Try this:
=VLOOKUP(A3,sheet2!A:B,2)*C3
I have recreated your spreadsheets below.
I have some data which includes a list of tasks for 2 individuals.
I want to represent this data in the following format.
So that it looks like the below.
How can I achieve this with the use of formulas?
[EDIT]
I don't think this question is the same as 'Data Wrangling in Excel - Rearranging Columns and Rows' as mine is about reflecting schedules in a more gantt chart-esque like format, whereas the other question seems to be more about transposing data.
Not sure if you have your desired output on the same sheet or a new sheet, but I used a new sheet starting in cell A1. The source datasheet is referred to as S1 in the formulas.
Assumptions:
Column C = Date Start
Column D = Date End
Persons' entries are grouped together (Person1, Person1, then Person2; never Person1, Person2, Person1)
Person can't be assigned two different areas for the same timeframe (e.g., Person1 can't have A and B for a given month)
Your desired dates are always the first of the month
Output/Formulas:
A1 is blank
A2: =INDEX('S1'!$A$1:$A$6,IFERROR(MATCH(A1,'S1'!$A$1:$A$6,0),1)+COUNTIF('S1'!$A$1:$A$6,A1))
A3: Formula copied down from A2
B1: =IF(A1<>"",EDATE(A1,1),MIN('S1'!$C$1:$D$6))
C1 to J1: Formula copied from B1
B2: =INDEX('S1'!$B$1:$B$6,MATCH(1,INDEX(('S1'!$A$1:$A$6=$A2)*('S1'!$C$1:$C$6<=B$1)*('S1'!$D$1:$D$6>=B$1),0),0))
B3 and C2 to J3: Formula copied from B2
Explanations:
The A2 formula: Looks at where the previous Person entry first occurs (MATCH part), and counts how many entries it has (COUNTIF part) to determine the next Person entry in line (INDEX part). The IFERROR portion is used to return the first Person entry, which is assumed to be on row 1.
The B1 formula: Adds one month to the previous date heading (EDATE part). The very first date heading looks for the earliest date in your source data (MIN part).
The B2 formula: Uses a match with multiple criteria on your source data (Person entry must match the indicated person, start date must be before or on the date heading, and end date must be after or on the date heading). The second INDEX creates an array of the combined criteria results (1 if true, 0 if false), and the MATCH returns which entry that is. The first INDEX returns the task (A, B, or C).
I'm trying to create a formula in column K which sums all cells that apply , in column J, only when the following conditions are true:
dates are the same in column A
AND client name is the same in column B
For example, in cell K2, I want the sum of J2+J3+J4 because A2=A3=A4 and B2=B3=B4.
K5=J5 only, because there are no other dates with the same client name.
K6=J6+J7 because A6=A7 and B6=B7.
What kind of formula would I use for this? I can't figure out how to do it with a SUMIFS.
I would try using a pivot table with:
The names as row values
The dates as the column values
And funds received using SUM in the values column
Edit
Based on #pnuts comments here is how to get the values in column K. Put this in K2 and drag down.
=IF(OR(COUNTIFS($B$1:B3, B3) = 1, B3 = ""), SUMIFS($J$2:J2, $A$2:A2, A2, $B$2:B2, B2), "")
This formula will give blank values until the formula finds a new client on a new date. However, I still think using pivot table is a better solution.
However, I still find the pivot table
In cell K2 put following formula:
=IF(COUNTIFS($A$2:A2,A2,$B$2:B2,B2)=1,SUMIFS($J$2:$J$10,$A$2:$A$10,A2,$B$2:$B$10,B2),"")
Adjust row 10 value. It will be last row of your actual data.
Copy down as much you need.
EDIT
Uploaded file shows the cause behind formula not working correctly for you. It turned out to be whitespace characters in column B (names) data e.g.
Cell B3: "Moe John" has a trailing space.
Cell B10: Same case with "Doe Jane"
If you want to use above posted formula then all names shall be corrected. Or alternatively to deal with spaces you can adopt below approach.
=IF(COUNTIFS($A$2:A2,A2,$B$2:B2,"*"&TRIM(B2)&"*")=1,SUMIFS($J$2:$J$28,$A$2:$A$28,A2,$B$2:$B$28,B2),"")
Notice the change in COUNTIFS formula where B2 is now replaced with "*"&TRIM(B2)&"*".
Even such formula will take a beating if you have uneven whitespace characters in between your data. I'd suggest normalizing it as much as possible.
I am trying to find a value within an array and then return the value in a specific row in the corresponding column.
In the example below, I need to know which bay the Chevrolet is in:
Column A Column C Column D Column E
Chevrolet Bay 1 Bay 2 Bay 3
Toyota Ford Saturn
Honda Chevrolet Jaguar
Ferrari Subaru Lexus
Mitsubishi Hundai BMW
I am looking for Chevrolet in the array C2:E5. Once it determines that the Chevrolet is in Column D, I need for it to return the value in D1. If it was in column E, I need it to return the value in E1.
Any help would be greatly appreciated. Thank you so much in advance.
Try this Array Formula:
=INDEX($C$1:$E$5,1,SMALL(IF(NOT(ISERROR(SEARCH(A1,$C$1:$E$5))),COLUMN($A:$C),99^99),1))
or if you are sure that each column contains exactly what's being searched it can be written like this:
=INDEX($C$1:$E$5,1,SMALL(IF($C$1:$E$5=A1,COLUMN($A:$C),99^99),1))
Enter formula in any cell by pressing Ctrl+Shitf+Enter.
How does it work?
Our ultimate goal is to find the Column that contains the match:
First we did the search for the match using this formula: SEARCH(A1,$C$1:$E$5). It just checks if any of the entries matched A1. Actually, it can be simplified to $C$1:$E$5=A1 but I'm not sure if all entries in each column match exactly what's in A1.
That formula will produce an array of values when entered as array formula. Something like: {SEARCH(A1,C1), SEARCH(A1,D1), SEARCH(A1,E1);... SEARCH(A1,E5)}. The result will be array of number(s) and error (if non was found). But we don't want that, else we will be returning error everytime.
We then use IF(NOT(ISERROR(SEARCH(A1,$C$1:$E$5))),COLUMN($A:$C),99^99). This formula returns the Column Number if there is a match and a relatively huge number 99^99 otherwise. Result would be: {99^99, 99^99, 99^99, 2, ..., 99^99}.
And we are close to what we need since we already have an array of Column and huge number. We just use SMALL to return the smallest number which in my opinion is the lowest Column Number where a match is found. So SMALL(IF(NOT(ISERROR(SEARCH(A1,$C$1:$E$5))),COLUMN($A:$C),99^99),1) would return 2. Which is the column where Chevrolet is referenced at $C$1:$E$1.
Since we already have the column number we simply use INDEX Function which is: INDEX($C$1:$E$5,1,2).
Note: 99^99 can be any relatively large number. Not necessarily 99^99. Actual 16385(max column number in Excel 2007 and up + 1) can be used.
Result:
Another quick and dirty answer is to put a "dummy" row above the entire data set and then determine which placeholder column returned the correct result.
In B1, you can put the equation
=MATCH($A$2,B3:B6,0)
And then in C1, you can put
=MATCH($A$2,C3:C6,0)
And so on until you've covered all the rows and columns. Change the B3:B6 & C3:C6 to reflect the actual rows of data in the given column.
Now, the fun array formula which will actually return the bay. I have this array formula in cell A1 and it is looking from B1:D1, but you can move cell A1 anywhere you want and the B1:D1 range should be all the dummy columns you made above. Also, this is assuming that the bays you want are in row 2 (if they are in a different row, change R2C to R#C where # is the row number). In order to properly enter, enter the formula and then press CTRL+SHIFT+ENTER.
=INDIRECT("R2C"&SUM(IF(ISERROR(B1:D1),FALSE,B1:D1))+1,FALSE)
If the formula is entered properly, it will show curly brackets { } around the equation when you single click on the cell.
This formula will do it, assuming that the lookup value is in A1:
="Bay "&SUMPRODUCT((B2:D5=A1)*(COLUMN(B2:D5)))-1
You could easily adjust it to add more rows and columns.
The formula returns the column number that contains the lookup value and concatenates it with the word Bay to return the exact result you want.
The -1 at the end adjusts for the fact that the Bay 2 column is actually the third column in the worksheet, so you might need to adjust that offset as well.
The SUMPRODUCT function is much undervalued. More on it here:
http://fiveminutelessons.com/learn-microsoft-excel/multiply-two-columns-and-add-results-using-sumproduct
The SUMPRODUCT formula above is perfect for what I want.
E.g. to find the location - COLUMN and ROW - of a given value at A1 in a 2D Range A2:J44
use: =SUMPRODUCT((A2:J44=A!)*(COLUMN(A2:J44))) gives the Absolute* COL#
and : =SUMPRODUCT((A2:J44=A1)*(ROW(A2:J44))) gives the Absolute* ROW#
(not where it is in the range)
These can then be used in e.g. INDEX() or CELL() etc functions.