Is automatically started as service at start of system a script. For example: myscript.service
Question - how to look through work (conclusion) of my script in real time. By analogy as though I have started the script from the terminal and I see a conclusion of work of a script.
service myscript status removes several lines and doesn't update a conclusion
journalctl -f -u myscript
Assuming you have used the systemd capabilities.
Either redirect> logs to the file and the tail -f command
Lets say I have a service (like rsyslog) that when I stop it, I want to log the reasoning behind someone shutting it down. Expressing this simply would be
systemctl start rsyslog
systemctl stop rsyslog
(Begin the prompt as to why a user is doing this after shutting down rsyslog)
#!/bin/bash
echo "you are shutting down the syslog service. Please state your name and reason."
read -p "[name?]" name && read -p "[reason?]" reason
logger $name:$reason
Modifying the Unit Files (located in /usr/lib/systemd/system/rsyslog.service), to include an ExecStop of the path to the script, I am able to run the above script. I know that the script is working as checking the log messages shows a :, the nonvariable portion that was passed to logger.
I need to be able to have this script operate like said shell script the instant someone attempts to shutdown the logging service. This means that echo commands are shown on the terminal and variables can be recorded using the read command.
This may be similar to this persons question, but I can not understand it.
Thanks to Mark Stosberg for sharing information about the systemd-ask-password command that takes user input during a systemctl call.
For those unaware, the systemd-ask-password command is a password prompt that's available for all machines sponsoring the systemd service. A unique feature of this command is the fact it can allow for user input during a systemctl/service call. Knowing this, one can prompt for as much data as they like which integrates perfectly into standard bash scripts, allowing for the interaction that may or may not be needed during a call.
Here is an example script:
#!/bin/bash
date=$(/bin/date)
echo "Rsyslog has been turned off at $date. Below is the name and reason"
name=`systemd-ask-password --echo --no-tty "name:"`
reason=`systemd-ask-password --echo --no-tty "reason for shutting down rsyslog:"`
echo LOG:$name:$reason:ENDLOG >>/var/log/messages
You must make sure that when initializing any of your services you make changes to the unit files located in /usr/lib/systemd/system/ with an ExecStart, ExecStop, and so forth under the [Service] tag to equal the path to your scripts. You can find what other options you can here as well as some syntax, and tie in with the unit file as needed.
I have this protocol port open to read remotely from Python, PHP applications but daily it crash and the port is unavailable as a result Python, PHP all client application fails
$ cat /var/tmp/server.sh
#!/bin/bash
while true; do tail -f /usr/local/freeswitch/log/freeswitch.log | nc -l -p 9999 -q 1 &
Q. Is there anyway to make this script always running like service this start or stop and if its crashed that somehow it automatically again get restarted ? Any advise or link to do such thing? i am using CentOS 6.x
Put your script in /etc/inittab as following
id:1:respawn:/var/tmp/server.sh
Refer to http://linux.about.com/od/commands/l/blcmdl5_inittab.htm for more information about the /etc/initab file.
After editing /etc/inittab restart your system.
My script (located in /etc/init.d) is creating a pid file ($PIDFILE), but there is no process running. My daemon script includes:
start-stop-daemon --start --quiet --pidfile $PIDFILE -m -b --startas $DAEMON --test > /dev/null || return 1
The script works fine when executing it manually.
You need to create startup links.
sudo update-rc.d SCRIPT_NAME defaults
then reboot. SCRIPT_NAME is the name of the script in /etc/init.d (Without the path)
Was able to get it working, but tried so many things, don't know exactly what fixed it (probably an error in script or config). However, learned a lot and wanted to share since I can't find much of the same in the internet abyss.
It seems Ubuntu (and many other distros based on Ubuntu, including Mint) has migrated to Upstart for job and service management. Upstart includes SysVinit (using /etc/init.d daemons) compatibility that still can use update-rc.d to manage daemons (so if you are familiar with that usage, you can keep on using it). The Upstart method is to use a single .conf file in the /etc/init folder. My SCRIPT.conf file is very simple (I'm using a python script):
start on filesystem or runlevel [2345]
stop on runlevel [016]
exec python /usr/share/python-support/SCRIPT/SCRIPT.py
This simple file completely replaces the standard script in /etc/init.d with the case statement to provide [start|stop|restart|reload] functions and the pointer to /usr/bin/SCRIPT. You can see that it includes runlevel control that would normally be found in the /etc/rc*.d files (thus eliminating several files).
I tried update-rc.d to create the necessary /etc/rc*.d/ files for my daemon. My daemon bash script is located in /etc/init.d and includes the start-stop-daemon command as in my original question. (That command also works fine from terminal.)
I had /etc/rc*.d/ files, the bash script in /etc/init.d and /etc/init/SCRIPT.conf file during boot and it seems that Upstart likely first looks for the .conf file for its direction because the SysVinit command service SCRIPT [start|stop|restart|reload] returns Unknown Instance, however you can find the process is running with ps -elf | grep SCRIPT_FILE.
One interesting thing to note is the forking of your daemon when using .conf. The script as written above only spawns one fork of the daemon. However, total independence of the original script is possible by using expect fork or expect daemon and respawn (see the Upstart Cookbook for reference). Using these will ensure that your daemon will never be killed (at least by using the kill command).
I continued to test both my daemon and the boot process by utilizing the sudo initctl reload-configuration command. This reloads the conf files where you can test your daemon by the sudo [start|stop|restart] SCRIPT command. The result of the start command is:
$ sudo start SCRIPT
SCRIPT start/running, process xxxx
$ sudo restart SCRIPT
SCRIPT start/running, process xxxx
$ sudo stop SCRIPT
SCRIPT stop/waiting
Also, there is a nice log in /var/log/upstart/SCRIPT.log that gives you useful information for your daemon during boot. Mine still has a very annoying bug that prevents root from displaying osd messages with notify-send from my daemon. My log file includes a gtk warning (I will open another question to solicit help).
Hope this helps others in developing their daemons.
I'm trying to ensure a script remains running on a development server. It collates stats and provides a web service so it's supposed to persist, yet a few times a day, it dies off for unknown reasons. When we notice we just launch it again, but it's a pain in the rear and some users don't have permission (or the knowhow) to launch it up.
The programmer in me wants to spend a few hours getting to the bottom of the problem but the busy person in me thinks there must be an easy way to detect if an app is not running, and launch it again.
I know I could cron-script ps through grep:
ps -A | grep appname
But again, that's another hour of my life wasted on doing something that must already exist... Is there not a pre-made app that I can pass an executable (optionally with arguments) and that will keep a process running indefinitely?
In case it makes any difference, it's Ubuntu.
I have used a simple script with cron to make sure that the program is running. If it is not, then it will start it up. This may not be the perfect solution you are looking for, but it is simple and works rather well.
#!/bin/bash
#make-run.sh
#make sure a process is always running.
export DISPLAY=:0 #needed if you are running a simple gui app.
process=YourProcessName
makerun="/usr/bin/program"
if ps ax | grep -v grep | grep $process > /dev/null
then
exit
else
$makerun &
fi
exit
Then add a cron job every minute, or every 5 minutes.
Monit is perfect for this :)
You can write simple config files which tell monit to watch e.g. a TCP port, a PID file etc
monit will run a command you specify when the process it is monitoring is unavailable/using too much memory/is pegging the CPU for too long/etc. It will also pop out an email alert telling you what happened and whether it could do anything about it.
We use it to keep a load of our websites running while giving us early warning when something's going wrong.
-- Your faithful employee, Monit
Notice: Upstart is in maintenance mode and was abandoned by Ubuntu which uses systemd. One should check the systemd' manual for details how to write service definition.
Since you're using Ubuntu, you may be interested in Upstart, which has replaced the traditional sysV init. One key feature is that it can restart a service if it dies unexpectedly. Fedora has moved to upstart, and Debian is in experimental, so it may be worth looking into.
This may be overkill for this situation though, as a cron script will take 2 minutes to implement.
#!/bin/bash
if [[ ! `pidof -s yourapp` ]]; then
invoke-rc.d yourapp start
fi
If you are using a systemd-based distro such as Fedora and recent Ubuntu releases, you can use systemd's "Restart" capability for services. It can be setup as a system service or as a user service if it needs to be managed by, and run as, a particular user, which is more likely the case in OP's particular situation.
The Restart option takes one of no, on-success, on-failure, on-abnormal, on-watchdog, on-abort, or always.
To run it as a user, simply place a file like the following into ~/.config/systemd/user/something.service:
[Unit]
Description=Something
[Service]
ExecStart=/path/to/something
Restart=on-failure
[Install]
WantedBy=graphical.target
then:
systemctl --user daemon-reload
systemctl --user [status|start|stop|restart] something
No root privilege / modification of system files needed, no cron jobs needed, nothing to install, flexible as hell (see all the related service options in the documentation).
See also https://wiki.archlinux.org/index.php/Systemd/User for more information about using the per-user systemd instance.
I have used from cron "killall -0 programname || /etc/init.d/programname start". kill will error if the process doesn't exist. If it does exist, it'll deliver a null signal to the process (which the kernel will ignore and not bother passing on.)
This idiom is simple to remember (IMHO). Generally I use this while I'm still trying to discover why the service itself is failing. IMHO a program shouldn't just disappear unexpectedly :)
Put your run in a loop- so when it exits, it runs again... while(true){ run my app.. }
I couldn't get Chris Wendt solution to work for some reason, and it was hard to debug. This one is pretty much the same but easier to debug, excludes bash from the pattern matching. To debug just run: bash ./root/makerun-mysql.sh. In the following example with mysql-server just replace the value of the variables for process and makerun for your process.
Create a BASH-script like this (nano /root/makerun-mysql.sh):
#!/bin/bash
process="mysql"
makerun="/etc/init.d/mysql restart"
if ps ax | grep -v grep | grep -v bash | grep --quiet $process
then
printf "Process '%s' is running.\n" "$process"
exit
else
printf "Starting process '%s' with command '%s'.\n" "$process" "$makerun"
$makerun
fi
exit
Make sure it's executable by adding proper file permissions (i.e. chmod 700 /root/makerun-mysql.sh)
Then add this to your crontab (crontab -e):
# Keep processes running every 5 minutes
*/5 * * * * bash /root/makerun-mysql.sh
The supervise tool from daemontools would be my preference - but then everything Dan J Bernstein writes is my preference :)
http://cr.yp.to/daemontools/supervise.html
You have to create a particular directory structure for your application startup script, but it's very simple to use.
first of all, how do you start this app? Does it fork itself to the background? Is it started with nohup .. & etc? If it's the latter, check why it died in nohup.out, if it's the first, build logging.
As for your main question: you could cron it, or run another process on the background (not the best choice) and use pidof in a bashscript, easy enough:
if [ `pidof -s app` -eq 0 ]; then
nohup app &
fi
You could make it a service launched from inittab (although some Linuxes have moved on to something newer in /etc/event.d). These built in systems make sure your service keeps running without writing your own scripts or installing something new.
It's a job for a DMD (daemon monitoring daemon). there are a few around; but I usually just write a script that checks if the daemon is running, and run if not, and put it in cron to run every minute.
Check out 'nanny' referenced in Chapter 9 (p197 or thereabouts) of "Unix Hater's Handbook" (one of several sources for the book in PDF).
A nice, simple way to do this is as follows:
Write your server to die if it can't listen on the port it expects
Set a cronjob to try to launch your server every minute
If it isn't running it'll start, and if it is running it won't. In any case, your server will always be up.
I think a better solution is if you test the function, too. For example, if you had to test an apache, it is not enough only to test, if "apache" processes on the systems exist.
If you want to test if apache OK is, then try to download a simple web page, and test if your unique code is in the output.
If not, kill the apache with -9 and then do a restart. And send a mail to the root (which is a forwarded mail address to the roots of the company/server/project).
It's even simplier:
#!/bin/bash
export DISPLAY=:0
process=processname
makerun="/usr/bin/processname"
if ! pgrep $process > /dev/null
then
$makerun &
fi
You have to remember though to make sure processname is unique.
One can install minutely monitoring cronjob like this:
crontab -l > crontab;echo -e '* * * * * export DISPLAY=":0.0" && for
app in "eiskaltdcpp-qt" "transmission-gtk" "nicotine";do ps aux|grep
-v grep|grep "$app";done||"$app" &' >> crontab;crontab crontab
disadvantage is that the app names you enter have to be found in ps aux|grep "appname" output and at same time being able to be launched using that name: "appname" &
also you can use the pm2 library.
sudo apt-get pm2
And if its a node app can install.
Sudo npm install pm2 -g
them can run the service.
linux service:
sudo pm2 start [service_name]
npm service app:
pm2 start index.js