I am trying to figure out a formula that compares the values from one column of a worksheet to find some form of that value in another.
Example
Worksheet #1 (List of values to find)
Column A
10935954
12297606
M8171210
MS90728-66
Worksheet #2 with formula
Column A Column B with Formula Result
10935954-7 Yes
12297606-S Yes
M8171210-V1345 Yes
MS90728-66G Yes
10935966 No
10935954-165 Yes
For the current example you can do it whit that formula:
=OR(ISNUMBER(SEARCH(Sheet1!$A$1,A1)), ISNUMBER(SEARCH(Sheet1!$A$2,A1)), ISNUMBER(SEARCH(Sheet1!$A$3,A1)), ISNUMBER(SEARCH(Sheet1!$A$4,A1)))
It is may be not the brightest idea but it works.
It returns TRUE if value contains in the given values or FALSE if do not.
If you want to be written yes or no you can always do that:
=IF(OR(ISNUMBER(SEARCH(Sheet1!$A$1,A1)), ISNUMBER(SEARCH(Sheet1!$A$2,A1)), ISNUMBER(SEARCH(Sheet1!$A$3,A1)), ISNUMBER(SEARCH(Sheet1!$A$4,A1))), "Yes", "No")
If you are using Excel 2007 try this:
=IF(OR(ISNUMBER(SEARCH(Sheet1!$A$1;A1)); ISNUMBER(SEARCH(Sheet1!$A$2;A1)); ISNUMBER(SEARCH(Sheet1!$A$3;A1)); ISNUMBER(SEARCH(Sheet1!$A$4;A1)));"Yes";"No")
You have to copy/paste the formula to other cells (A2, A3, A4, A5 and A6)
Related
I'm trying to set some things in my Excel in order to improve my process.
I would like to create a VBA function which let to display value in cell B13 if cell B11 contains "_01_Clients_Particuliers" and cell B12 contains "_00".
These cells are dropdown list.
I never use VBA up to now.
I could write into the cell B13 :
=IF(COUNTIF(B11,"_01_Clients_Particuliers"),"_100PRD05","")
But I need to take into account two cells and I assume I need to use VBA to do that, because the cell B14 has already a formula : =INDIRECT(B13)
Do you have any idea ?
Assuming you drop-down list only contain few selection, then the following formula should be work for you.
=IF(AND(ISNUMBER(SEARCH(H1,C1)),ISNUMBER(SEARCH(H2,C2))),"It is there","not found")
In addition, you will write the range reference directly, it will return error in my case
Unless I've misunderstood your question, I don't think you need VBA to do this.
Check out Using IF with AND, OR and NOT functions
Again, apologies if I'm mistaken, but it seems that your desired result could be produced with the following formula in B13:
IF(AND(B11 = "_01_Clients_Particuliers", B12 = "_00"), "_100PRD05","")
This will put the value "_100PRD05" in B13 if B11 equals "_01_Clients_Particuliers" and B12 equals "_00".
I have two sheets as below in Sheet-4 if NE and Slot column match the Sheet-1 column which is AB1S2a SLOT-1 then i want the result SN which is in sheet-4 SN=CAT1016127B to be printed in Sheet -1 beside the slot, Is there any way?
Sheet-4:
Sheet-1:
Assume in Sheet1 cell D2 you want serial no. Then use this array formula to achieve that.
=IFERROR(INDEX(Sheet4!C:C,MATCH(B2&C2,Sheet4!A:A&Sheet4!B:B,0)),"")
As it is a array formula. Press CTRL+SHIFT+ENTER to evaluate the formula.
You could try the following code:
=SUMIFS(Sheet4!C:C;Sheet4!A:A;B2;Sheet4!B:B;C2)
I have a row that will have weekly values entered. Column B has the initial value, and E has the calculation; as I add values to C, D and so on, I want the calculation to skip the previous columns value when the next column gets a value.
B1-C1=E1 BUT when a value is added to D1, E1 would update to B1-D1=E1
Sorry for the horrible description. This is probably answered somewhere on this site but I am not sure what terms to search.
Many thanks!
you can use an if statement. I am not 100% sure of your problem but something like this might be helpful.
if(A1, A1, 0)
So for your example provided.
=B1-if(D1, D1, C1)
This says if there is a value in D1 use D1 else use C1. This works in this example, because if
D1 is empty or 0 you will use the other cell. This may change for any given problem.
Use this if function in E1:
=IF(D1>0,B1-D1,IF(C1>0,B1-C1,B1))
Then enter a value in B1, then C1 then D1 to see the results.
According to your question, you only have room for two entries after the default B1 value. This statement will handle that.
If you need more fields, nest more if functions. But if's can only be nested 7 deep, so you can only have an initial value in B1 and 7 more cells, C1 to I1 with your formula in J1
If you actual data is as simple as your sample data you could just use:
=IF(LEN(D2)>0, B2-D2,B2-C2)
You could also use:
=IF(ISBLANK(D2), B2-C2, B2-D2)
if you prefer but Len is a little shorter and I believe the ISBLANK() function has flaws, If you have a formula in D2 that has a calculation and you set the result to "" then it will pick up as false. It depends on your needs.
I would do the following.
In E1 paste the following:
=A1-INDEX(B1:D1,1,COUNT(B1:D1))
The count formula will tell how many values are present in the range of B:D column. This will be used to catch the last column with an index formula which will be deducted form A1.
One thing is very important! The values from A to D has to be written in sequence, if one column is missing than the calculation will be false.
Hope I could help!
I have an excel workbook that I need some help with INDEX and MATCH or any other Formula that can get me my end result.
Here is sheet1:
SIT_ID METER SUSE_CD
10834282 DT0061 B
10834282 AW7931 P
21676286 CQ9635 P
21676286 DP4838 B
21726281 AW7880 P
21726281 DT0032 B
Here is Sheet2:
Site ID B P
10834282
21676286
21726281
Ultimately what I am trying to do is on Sheet2 is put the Meter that = B for the SITEID in the column and then Put the Meter that = P in the Same row.
I have never used Index or Match and I looked it up online but I am confused and hoping someone can help me with the correct formula or point me in the right direction.
Thanks so much!
INDEX first takes a range, then a row number, an optional column number (and an optional area number).
MATCH takes a value to lookup, an array and a mode.
In your problem you can use the following in Sheet2 cell B2:
=INDEX(Sheet1!$B$2:$B$7, MATCH($A2, IF(Sheet1!$C$2:$C$7=B$1,Sheet1!$A$2:$A$7), 0))
This formula is an array formula and will work with Ctrl+Shift+Enter and then you can fill it to the other cells.
I had to use an IF because there're two conditions to check.
EDIT: Use this one if your cell formats are different:
=INDEX(Sheet1!$B$2:$B$7,MATCH($A2*1,IF(Sheet1!$C$2:$C$7=B$1,Sheet1!$A$2:$A$7*1),0))
EDIT2: Adding trimming:
=INDEX(Sheet1!$B$2:$B$7,MATCH($A2*1,IF(TRIM(Sheet1!$C$2:$C$7)=TRIM(B$1),Sheet1!$A$2:$A$7*1),0))
EDIT3: If you're using it on your full data, change the range:
=INDEX(Sheet1!$B:$B,MATCH($A2*1,IF(TRIM(Sheet1!$C:$C)=TRIM(B$1),Sheet1!$A:$A*1),0))
Assuming your Sheet1 looks like this:
And your Sheet2 looks like this:
The formula in Sheet2 cell B2 and copied over and down to cell C4 is:
=INDEX(Sheet1!$B$2:$B$7,MATCH(1,INDEX((Sheet1!$A$2:$A$7=$A2)*(Sheet1!$C$2:$C$7=B$1),),0))
Note that this is a regular formula, so no need for Ctrl+Shift+Enter
A helper column D is added to initial columns.
D2: =$A2 & $C2
Now it's possible to make a simple search of the concatenated SITE_ID and SUSE_CD:
H2: =MATCH($G2&" B";$D$2:$D$8;0)
The result would be a row number (=1 in this case) for the needed string in array $D$2:$D$8.
INDEX shows the value of the cell, found by counting n-th row (defined by MATCH) and m-th column (=2) in array $A2:$A$8 from the upper left cell (A2).
Altogether: =INDEX($A$2:$B$8;MATCH($G2&" B";$D$2:$D$8;0);2)
The easiest way to get around with this is,
to use concatenation operator in the match function.
Don't forget to use Ctrl+Shift+Enter
Use below formula in column B of Sheet 2
{=INDEX(Sheet1!$B:$B,MATCH(Sheet2!$A2&Sheet2!$B$1,Sheet1!$A:$A&Sheet1!$C:$C,0))}
And the below formula in column C of Sheet 2
{=INDEX(Sheet1!$B:$B,MATCH(Sheet2!$A2&Sheet2!$C$1,Sheet1!$A:$A&Sheet1!$C:$C,0))}
And then flash fill the remaining rows.
I have two excel sheets. The first contains a formula for calculation with one input cell (A1), and one output cell (B1). The formula for B1 could be B1 = A1 * 3 (example).
The second sheet contains various values in column A: A1 = 4; A2 = 9; A3 = 5 ... In corresponding column B of this sheet I'd like to get the result of B1 (first sheet) = A1 (second sheet) * 3 for each A (second sheet) input value.
Basically I'd like to treat the first sheet as a function, where A1 is the argument and B1 the result that is passed back to the second sheet's B column.
Sheet 2
A1 4 B1 12 (result from sheet 1)
A2 9 B2 27 (result from sheet 1)
...
Is it possible without macros?
This is built into Excel. In version 2003, use the Data, Table menu.
You can find many examples on the net. Here is one.
You can create such tables with either 1 or 2 entries (parameters).
I don't think so .....
If in B1 Sheet1 you have
3*A1
If you try this in Sheet2 B1
`=SUBSTITUTE(Sheet1!$B$1,"A1",A1)`
it will give
3*4, and Sheet2 B2 will be
3*9etc
But I don't see how you could coerce this to a numberic calculation with formulae without possibly some heavy duty formula string parsing to separate numbers from operators (which is unlikley to flex as desired if you change the entry in B1 Sheet 1)
[Update 2: but fwiw I have done it with a named range]
I used this range name
RngTest
=EVALUATE(3*INDIRECT("rc[-1]",FALSE))
This is a global range name so it will work on any sheet, more powerful than my prior OFFSET effort. It multiplies the cell to the immediate left by 3
so entering =RngTest in B1:B3 (and then in this new example C1:C3 as well)
gives the output you want
I think you want to use this in your sheet two column.
Sheet1!B1 * Sheet2!A1
Entirely without VBA: expect lots of pain, I won't go there. But...
To substantially reduce the amount of pain, you could actually use this one tiny VBA user-defined function (not technically a "macro"), basically just a wrapper to make VBA's Evaluate function available in worksheet formulas:
Function eval(myFormula As String)
eval = Application.Evaluate(myFormula)
End Function
You could then use it like this in cell B1 on sheet 2:
=eval(SUBSTITUTE(Sheet1!$B$1,"A1","A"&ROW()))
Note that this requires Sheet 1 cell B1 to contain A1*3 and not =A1*3, i.e. no equal sign. Maybe with a bit more fiddling around, it can be made to work even with the = sign there...
EDIT: Actually, if you format Sheet 1 cell B1 as Text before typing in the formula, this will work even if your formula starts with a =.
Is it possible without macros?
Yes!
You can now use =LAMBDA for this.
Define your function using the name manager, then reference it in your second sheet's formula.
See syntax at Introducing the LAMBDA function.
For more information about how to use the LAMBDA function, see the support documentation.