I have created a function in SSJS Library. Because I use it in more than one XPages.
When I call this function behind a button I cannot see the value in the field
If I print it out I can see the value at the Admin Console but cannot see it in the form Even if I get page with full refreshed.
Actually my another question is.. is it possible to compare notesXSPDocument and NotesDocument. Maybe someoen can say that what is the best way for that?
function deneme(document1:NotesXSPDocument,otherDocfromOtherDatabase:NotesDocument)
{
//do staff here
if (document1.getItemValueString("field1")==otherDocfromOtherDatabase.getItemValueString("field2"))
{ //do some staff here...
document1.replaceItemValue("fieldName","FieldValue");}
}
You can compare item values from Document and XSPDocument, just be careful with the type you are comparing.
In your code you are comparing 2 javascript strings with == operator.
The code seems to be OK, just remember to save the document1 after the changes and maybe check that the items have some value.
var valueFromXspDoc = document1.getItemValueString("field1");
var valueFromDoc = otherDocfromOtherDatabase.getItemValueString("field2");
if (valueFromXspDoc && valueFromDoc && (valueFromXspDoc === valueFromDoc)) {
// stuff here...
document1.replaceItemValue("fieldName","FieldValue");
document1.save();
}
Don not compare it with == sign. A better way is to document1.getItemValueString("field1").equals(otherDocfromOtherDatabase.getItemValueString("field2"))
Related
I have created an XPage with the following: Started by creating a custom layout control using the Application Layout. I aded the layout control to the xpage and then dropped in a Dynamic Content Control. I configured the control as follows:
<xe:dynamicContent id="dynamicContent1" defaultFacet="GovernanceReviews"
useHash="true">
<xp:this.facets>
<xc:ccViewDocumentTemplates xp:key="DocumentTemplates"></xc:ccViewDocumentTemplates>
<xc:ccViewGovProcurementReviews xp:key="GovProcurementReviews"></xc:ccViewGovProcurementReviews>
<xc:ccViewGovRevReporting xp:key="GovRevReporting"></xc:ccViewGovRevReporting>
<xc:ccViewGovRevWOCompleted xp:key="GovRevWOCompleted"></xc:ccViewGovRevWOCompleted>
<xc:ccViewGovernanceReviews xp:key="GovernanceReviews"></xc:ccViewGovernanceReviews>
<xc:ccViewProfilesByType xp:key="ProfilesByType"></xc:ccViewProfilesByType>
<xc:ccViewProfilesWithTargetCompl xp:key="ProfilesWithTargetCompl"></xc:ccViewProfilesWithTargetCompl>
<xc:ccViewLastUpdated xp:key="LastUpdated"></xc:ccViewLastUpdated>
<xc:ccViewUserGuide xp:key="UserGuide"></xc:ccViewUserGuide>
<xc:ccViewTracking xp:key="Tracking"></xc:ccViewTracking>
</xp:this.facets>
</xe:dynamicContent>
Then I dropped in a navigator control in the left column and created BasicLeafNodes to correspond to the dynamic content control I used the href property and used the #content="" to display the correct content.
This works just fine, but I am having problems figuring out how to make the selections in the navigator highlight when they are selected. I know I need to compute the Selectd property,but I can't figure out how to get the xp:key value so I can compare it to the SubmitValue. I know this is probably something simple, but I can't figure it out.
Can someone please enlighten me.
Thanks,
MJ
ADDED 03/26/2014 - I have a feeling that it has something to do with Using the href property of the Dynamic Content Control to perform the content switching. I know that makes the BasicLeafNodes Links. So, not sure how the Navigator records which link is being executed and how to capture that.
MJ
Add a value is the submitValue property
And in the onItemClick Event
Assign the submitted value to a viewScope variable
viewScope.Selected=context.getSubmittedValue()
And finally check if the viewScope variable equals your item submit value in the selected property. This needs to be calculated
if(viewScope.Selected="byCategory"){
return true
}else{
return false
}
The following is working for me:
if(viewScope.Selected == "byCategory"){
return true
} else{
return false
}
An equality test must be made with two equal symbols (or three). One equal symbol evidently always returns true.
I did it by jQuery. Just put the following code to the custom control, which contains navigator.
$( function() {
if (window.location.hash.length > 0) {
select()
}
});
$(window).on('hashchange', function() {
select();
});
function select() {
$(".lotusColLeft .lotusMenu .lotusBottomCorner li").removeClass(
"lotusSelected")
$(".lotusColLeft .lotusMenu .lotusBottomCorner li a")
.filter(
function() {
return window.location.hash.indexOf($(this).attr(
'href')) > -1
}).parent().addClass("lotusSelected")
}
The following code is a script object on an XPage in it I loop through an array of all the forms in a database, looking for all the forms that contain the field "ACIncludeForm". My method works but it takes 2 - 3 seconds to compute which really slows the load of the XPage. My question is - is there a better method to accomplish this. I added code to check to see if the sessionScope variable is null and only execute if needed and the second time the page loads it does so in under a second. So my method really consumes a lot of processor time.
var forms:Array = database.getForms();
var rtn = new Array;
for (i=0 ; i<forms.length; ++i){
var thisForm:NotesForm = forms[i];
var a = thisForm.getFields().indexOf("ACIncludeForm");
if (a >= 0){
if (!thisForm.isSubForm()) {
if (thisForm.getAliases()[0] == ""){
rtn.push(thisForm.getName() + "|" + thisForm.getName() );
}else{
rtn.push(thisForm.getName() + "|" + thisForm.getAliases()[0] );
}
}
}
thisForm.recycle()
}
sessionScope.put("ssAllFormNames",rtn)
One approach would be to build an index of forms by yourself. For example, create an agent (LotusScript or Java) that gets all forms and for each form, create a document with for example a field "form" containing the form name and and a field "fields" containing all field names (beware of 32K limit).
Then create a view that displays all these documents and contains the value of the "fields" field in the first column so that each value of this field creates one line in this view.
Having such a view, you can simply make a #DbLookup from your XPage.
If your forms are changed, you only need to re-run the agent to re-build your index. The #DbLookup should be pretty fast.
Place the form list in a static field of a Java class. It will stay there for a long time (maybe until http boot). In my experience applicationScope values dissappear in 15 minutes.
I'm writing a Couchdb _design document for the SQL command below:
SELECT NVL(MAX(NVL(VERSION,0)),0)+1 FROM pricelistdocs WHERE
PRICE_LIST_ID = ? AND DELETION_FLAG = 0;
I came up with a _design view function below while run and return values but I doubt if the correct and fulfills expectation of the above SQL command.
function(doc){
if(doc.PRICE_LIST_ID == "110011" && doc.DELETION_FLAG == "0" ){
emit(doc._id, doc.VERSION);
}
}
Please how can I add the NVL() and MAX function to my _design view document above.
Any infortiom or clue is appreciated. Thank you for your time.
You can write your own NVL function by checking for the existance of a field and returning 0 if it does not exist.
For the max functionality, you have to add a reduce function to your view. If you just want to get the maximum, "reduce": "_max" will do, which is a built in reduce function.
I'm looking a method or way how to check that the text field in crm form is "null"
I've got a tab, there are section and text field inside of it;
furthermore, I'm using that function in order to hide/show tab.
function setVisibleTabSection(tabname, TextFieldName, show) {
var tab = Xrm.Page.ui.tabs.get(tabname);
if (tab != null) {
if (TextFieldName == null)
tab.setVisible(show);
else {
var section = Xrm.Page.data.entity.attributes.get(TextFieldName).getValue();
if (section != null) {
show == true;
tab.setVisible(show);
}
}
}
}
however, It doesn't work. There is nothing inside of the text box, and the tab expanded anyway.
by the way, parameters, which I give the function: "tab_8", "new_conf_report", false
where the secon one the name of the text field
Try
if (section != null && section !="")...
You may find that a field which is initially blank is null, whereas one from which you have deleted content but not yet saved the form is simply an empty string.
Certainly worth a shot.
show==true
is incorrect as others have pointed out (needs to be show=true) but is simply redundant as written inside the same IF statement, just replace next line as:
tab.setVisible(true);
It is possible you intended "show" to be the default tab state to use if text field is not empty, in which case just move this line outside the IF instead of changing it (as shown below)
It looks like the construction using the third "show" parameter is to allow you to use the function to set the tab state to a specific state of shown or not without looking for a text field value at all. You would need to pass parameters as eg tabname,,true - you might consider swapping the TextFieldName and Show parameters so it is easier to just drop the third rather than remember to double-comma.
While we're fixing stuff, lets replace that variable "section" with something with a more meaningful name:
function setVisibleTabSection(tabname, show, TextFieldName) //usage: show is state Tab will have if no TextFieldName is specified, or if text field is empty
{
var tab = Xrm.Page.ui.tabs.get(tabname);
if (tab != null)
{
if (show==null){show=true;}
if (TextFieldName == null)
{
tab.setVisible(show);
}
else
{
var strFieldValue = Xrm.Page.data.entity.attributes.get(TextFieldName).getValue();
if (strFieldValue != null && strFieldValue !="")
{show=true;}
tab.setVisible(show);
}
}
}
I don't see anything wrong with your Javascript (besides what Guido points out, which basically will only set the tab to visible if you pass in true for show). Use the debugging tool within IE by pushing F12, and set a break point at the top of your function to see where your logic is failing.
If you've never debugged javascript before, see http://social.technet.microsoft.com/wiki/contents/articles/3256.how-to-debug-jscript-in-microsoft-dynamics-crm-2011.aspx
or
How to debug jScript for Dynamics CRM?
I think there is a typo in the code:
show == true;
actually the code (assuming "=" instead of "==") will show always the tab if TextFieldName isn't empty, removing that line will show/hide the tab according to show parameter value
It seems to work when I run it but I'm not sure what you'd expect it to do so it might not be working the way you'd like it to. :)
function setVisibleTabSection(tabName, textFieldName, show) {
var tab = Xrm.Page.ui.tabs.get(tabName);
if(!tab) return;
if (!TextFieldName)
tab.setVisible(show);
else {
var section = Xrm.Page.data.entity.attributes.get(textFieldName).getValue();
if (section)
tab.setVisible(true);
}
}
I'm writing an event handler to handle the updating of a particular SPItem in a list. The event is asynchronous and I get the SPEvenItemProperties without a problem. What I would like to find out is which of the SPItems columns' actually fired the event. Anyone have any idea how?
Thanks in advance.
Your answer depends a bit on from where and how the SPListItem is retrieved. In a regular list, you do not have access to the previous values of the item. If you turn on versioning, you can get access to the previous versions, depending on permissions, of course.
For a document library you can use the SPItemEventProperties.BeforeProperties to get the previous metadata for a document.
For a document library you can try something like this:
foreach (DictionaryEntry key in properties.BeforeProperties)
{
string beforeKey = (string)key.Key;
string beforeValue = key.Value.ToString();
string afterValue = "";
if (properties.AfterProperties[beforeKey] != null)
{
afterValue = properties.AfterProperties[beforeKey].ToString();
if (afterValue != beforeValue)
{
// Changed...
}
}
}
.b
I think the best way to do this would be to look through the BeforeProperties and AfterProperties of the SPItemEventProperties and check which fields have different values.
These contain the values of all fields of the item before and after the event occurred.