One of our customers is planning to change the public IP address of their server where their website is hosted (in-house on IIS).
The website was built with Classic ASP.
What changes are needed on the server after the IP address change, and where would they be?
(I know this question is very vague but this is all the information I have for now - apologies.)
Normally there will be no dependencies on a specific IP address in classic ASP.
IIS ofcourse manages on which IP address(es) and which hostnames the (asp) site will respond (in the bindings setting for the site), and the public DNS settings are responsible for routing the proper hostname to the correct (new) IP address, but ASP code doesn't care about hostnames or ip-addresses, it just responds to whatever IIS thinks should be handled by the site in question.
The DNS will propably be hosted at the companies Internet provider, you should check if the site in IIS has the correct bindings, and if it is not configured to respond to specifically the old IP address.
If the server uses multiple IP addresses you may need to alter the bindings in IIS manager to ensure that the domain of your website is associated with the correct IP, and obviously you will need to update the DNS record for your domain. Neither of these are specific to Classic ASP
Related
I am very new to Cloudflare. So please bear with me. I need to access my website (hosted in Microsoft Azure - App Services) via IP address instead of the domain name.
To do this, I need to add HOST=www.mydomain.com into the HTTP header when requesting the website via IP address.
I heard it can be solved via Cloudflare, but the person I asked will not elaborate further. Is it possible? If yes, what service should I purchase? Any manual or instruction will be appreciated.
If Cloudflare isn't possible, do you have any service recommendations?
Thanks :)
The reason the host header is needed is because Azure App Services are multi-tenant (multiple apps on a single IP) by default. So, the server needs some way to know where to route your request to (the host name). In addition, IPs are not guaranteed to be static (they can change as you scale for instance).
It should be possible to secure a single static IP address using the following method -
https://learn.microsoft.com/en-us/azure/app-service/overview-inbound-outbound-ips#get-a-static-inbound-ip
What is unclear is whether or not this IP would also be dedicated (meaning only your domain would use it). This is what would be required in order to allow you to access the app service without a hostname specified.
Cloudflare will not solve this issue, as it sits at the DNS layer (domain name access). Accessing a server via IP would bypass Cloudflare entirely.
I am a bit new to the deployment of a website. I have a server which is written in Node.js. Previously I had been using Heroku for deploying my apps without knowing much about deployment. I would like to know how do I deploy my server to create a website which has .com at the end of it like www.example.com and not www.example.herokuapp.com. I think it has something to do with domains (correct me if I am wrong). I would like to know what exactly is a domain and a DNS provider and how to deploy a website in such a way. Thank you.
You should ask one question to yourself when you hit www.example.com in browser how does it load a page?. When you run a website on your laptop it basically runs locally, if you want to access your website over the internet you would require public IP(host or server) accessible over the internet so you can access a webpage using public IP:port. But this is not the best option because IP may change in the future and also remembering IP for each application will be difficult. Imagine if you access Facebook, Instagram or any other websites by its IP addresses how difficult and inconvenient would it be? There are a couple of things you should know.
DNS-> Domain Name system
Every host is identified by the IP address but remembering numbers is
very difficult for the people and also the IP addresses are not static
therefore, a mapping is required to change the domain name to IP
address. So DNS is used to convert the domain name of the websites to
their numerical IP address.
DNS is a hostname to IP address translation service. DNS is a distributed database implemented in a hierarchy of name servers. It is an application layer protocol for message exchange between clients and servers.
Name servers
Domain Name Servers (DNS) are the Internet's equivalent of a phone book. They maintain a directory of domain names and translate them to Internet Protocol (IP) addresses. This is necessary because, although domain names are easy for people to remember, computers or machines, access websites based on IP addresses.
DNS record
A domain name, IP address what is the validity?? what is the time to live ?? and all the information related to that domain name.
Once you understand the DNS
Host(Deploy) your website to Amazon EC2 or Heroku and obtain Public IP.
Buy a domain from domain provider like Godaddy
Map domain(ie www.example.com to IP)-> DNS record
Mapping domain to IP may vary platform to platform but the Core principle remains the same. I would suggest you these below link. Try to find differences in both, doing so you will learn along the way
http://www.littlebigextra.com/map-domain-name-amazon-aws-ec2-instance/
https://medium.com/progress-on-ios-development/connecting-an-ec2-instance-with-a-godaddy-domain-e74ff190c233
I have been at this since last couple of weeks. After tiring efforts leading to nowhere, I am posting here.
I have a Website built and hosted in IIS locally. I just bought domain name from GoDaddy. I have my computer's public IP where the website in IIS is present. What are my next steps so that I can keep my computer as server and link with domain name? So that website is accessible publicly through domain name.
I saw a lot of posts with Web Hosting in Azure or other places, do I HAVE TO buy and host to make my site public?
I am a novice website builder and have very limited knowledge about this.
first you need make sure your sever is secured, only open necessary ports
go to another computer, in browser input public ip to see if you can open your webpage
then in Godaddy you can add A record for your domain, to point your domain to your public IP, refer to this GoDaddy document: https://ca.godaddy.com/help/add-an-a-record-19238
If you are not comfortable or don't resource to do these, I suggest you host on Azure or other cloud providers
You could host your application in either Azure VM or your local machine. After all, Could VM should be more convenient because you don't need spend a lot of time to handle network issue and you don't need physical space.
When you decide to host your application locally, you have to ensure your are using windows server OS, otherwise, you have 10 concurrent request limit.
Access the application via domain is quite simple.
You need to enable port like 80 in windows firewall.Promise your server are in DMZ and can be accessed externally
Create IIS binding header with null domain and your public address
Try to access your website via your public IP address
Point godday domain to your public IP address
Add your domain to your Site's binding host header->host name field
If you decide to host your application in IAAS like Azure VM, then you have to create inbound rule for your port number and allow port in windows firewall. You also have to point your godday domain to your cloud VM's public IP address and create IIS binding with your domain. Finally, you should be able to access your website.
I have a couple of web applications on an Azure server. A client allowed the domain to lapse, and I can no longer access the DNS settings for this domain. The domain's DNS settings (A records, CNAMES) are still authorized in Azure to control traffic for the server's IP address. So, any app I create on this server now resolves to the domain that is no longer under my control.
How do I get myself out of this pickle? Can I change the server's IP address? I have not been able to find out how to do that. Can I de-authorize the DNS settings that now control access to this IP address?
If you want to remove access to the app from a domain, you just remove the domain from the App Service.
DNS tells users where to go for a particular domain name.
If your app doesn't mention it as a domain, the request won't be routed to it.
Remember that addresses in Azure App Service are shared so it requires that you actually explicitly mention the domain in the app service's configuration.
Ugh. Ok, my issue was that I was redirecting to the domain in my web.config.
I have been attempting to set up magento on a shared hosting server that doesn't support innoDB, ergo its not been possible. The domain I want to use has also been registered with this rubbish hosting provider. (one[dot]com for anyones reference). So I thought I would be able to point this domain to a different hosting provider that DOES support it, but one[dot]com doesnt allow me to change nameservers for the domain. They just said this:
You can only setup IP address, CNAME and web forwarding in our DNS settings but not change of nameservers
Would there be any way to change any of these settings or the .htaccess file so that, for example
http://www.mydomain.com/folder/page.php?query=string
Would display a page from the other server
http://xxx.xxx.xxx:xx/folder/page.php?query=string
I've created loads of sits doing all sorts but never really needed to other with the domain administration side of things.
You don't need to change name servers to map a domain to a different server. If the "good" provider supports it (i.e. allows you to register a domain on the server that isn't hosted by the company), just switch the A and MX records to the new server's IP address.
You do need the cooperation of the "good" provider for this, though.
If they're letting you set up the IP address, then setting the IP address of www.mydomain.com to xxx.xxx.xxx.xx should do the trick. On the other server, you'll need its webserver to be set up to serve www.mydomain.com as a virtual domain - if you're using a hosting provider they should do this for you; if not it should be fairly easy to set up (consult the manual of whichever web server software you're using).