I have changed my reply url in the azure ad tenant application.
I have updated this reply url in the get request for getting the authorization code from azure , along with the client id of the application.
The thing is
I am getting this response
{ "error":"invalid_grant",
"error_description":"AADSTS70002: Error validating credentials. AADSTS50011: The reply address 'newly updated reply url which i send in get request'
does not match the reply address 'old reply url which I changed in AZURE'
provided when requesting Authorization code.
Trace ID: 0e05b301-c7b1-48bd-ab78-ce7c2b12d74d
Correlation ID: 17f5ae64-850d-4767-823c-f0e7ad2c49da
Timestamp: 2016-03-28 12:02:17Z","error_codes":[70002,50011],
"timestamp":"2016-03-28 12:02:17Z",
"trace_id":"0e05b301-c7b1-48bd-ab78-ce7c2b12d74d",
"correlation_id":"17f5ae64-850d-4767-823c-f0e7ad2c49da"
}
I am sure , that there is no issue in the client id , which i pass.
Why is it pointing to the old value ??
Related
I created in laravel a scim route with total return results 0 and I got the secret certificate in application registration and generate certificates and secrets but it doesn't work.
SystemForCrossDomainIdentityManagementCredentialValidationUnavailable Details: We received this unexpected response from your application: An HTTP/404 Not Found response was returned rather than the expected HTTP/200 OK response. To address this issue, ensure that the tenant URL is correct. The tenant URL is usually in a format like: https://<>/scim. If this does not resolve the issue, contact the application developer to ensure their SCIM endpoint conforms with the protocol
as is returning my route:
return response()->json(['schemas'=>["urn:ietf:params:scim:api:messages:2.0:ListResponse"],'totalResults' => 0, "Resources" => [],"startIndex" => 1,"itemsPerPage" => 20]);
The AAD provisioning service starts off by sending a few GET requests looking for non-existent resources - i.e.: GET /Users?userName eq "469787bf-b179-4ef9-bc60-ee07cc78fd47". The expected response is a 200/OK with ListResponse type response with totalResults of 0.
The message you're getting back indicates that one of these test API calls is getting a 404 rather than a 200. This could be because the URL is incorrect, or the SCIM implementation is noncompliant and is returning a 404 for a query that returns zero results.
Hey Guys after publish to Azure I get the following error when I want to login.
I checked the URL in my Code and the App Registration --> It's the same...
When i run with Azure domain: (I already created a new registered app)
We're unable to complete your request
unauthorized_client:
The client does not exist or is not enabled for consumers. If you are the application developer, configure a new application through the App Registrations in the Azure Portal at https://go.microsoft.com/fwlink/?linkid=2083908.
When I run localhost login appears and I logging in it redirects
me to this:
The reply URL specified in the request does not match the reply URLs configured for the application
Sorry, but we’re having trouble signing you in.
AADSTS50011: The reply URL specified in the request does not match the reply URLs configured for the application: 'ace44f89-fa01-41a3-8d0c-f0835adb1065'.
Troubleshooting details:
Request Id: e9199aae-5431-4ca5-ae1e-ad2ab78f0a00
Correlation Id: cc29341a-f2bd-4b2b-a968-474c8203c493
Timestamp: 2021-04-13T07:32:21Z
Message: AADSTS50011: The reply URL specified in the request does not match the reply URLs configured for the application: 'ace44f89-fa01-41a3-8d0c-f0835adb1065'.
The client does not exist or is not enabled for consumers.
This error means you are using a Microsoft Account to login your client app, but it is not enabled for that.
To change the setting for an existing AD App, navigate to the Manifest blade of it in the portal, find the signInAudience attribute, set it with AzureADandPersonalMicrosoftAccount or PersonalMicrosoftAccount.
AADSTS50011: The reply URL specified in the request does not match the
reply URLs configured for the application
When you visit the application url , you will be redirected to the login page. Decode the authorization request url, you will find redirect_url, copy the value of redirect_url and paste it into the azure portal, and try again.
We are new to O365 Authentication and trying to authenticate the user.
Here i am getting this error while trying to login with, office 365.
Create app in active directory add app id and return urls in app, and this is the document I followed, https://blog.xamarin.com/put-adal-xamarin-forms/
here is the error we are getting,
AADSTS70002: The request body must contain the following parameter: 'client_secret or client_assertion'
Trace ID: e580114e-2dd9-4cc4-b903-6cef743a2900
Correlation ID: 6e58ff9d-bea4-4ad3-9fe3-e27c92fc9597
Timestamp: 2018-12-05 12:51:23Z
{System.Net.Http.HttpRequestException: Response status code does not indicate success: 401 (Unauthorized). ---> Microsoft.IdentityModel.Clients.ActiveDirectory.AdalException: {"error":"invalid_client","error_description":"AADSTS70002: The request body must contain the following parameter: 'client_secret or client_assertion'\r\nTrace ID: e580114e-2dd9-4cc4-b903-6cef743a2900\r\nCorrelation ID: 6e58ff9d-bea4-4ad3-9fe3-e27c92fc9597\r\nTimestamp: 2018-12-05 12:51:23Z","error_codes":[70002],"timestamp":"2018-12-05 12:51:23Z","trace_id":"e580114e-2dd9-4cc4-b903-6cef743a2900","correlation_id":"6e58ff9d-bea4-4ad3-9fe3-e27c92fc9597"}: Unknown error
--- End of inner exception stack trace ---}
Ok ,Maybe you have registered your app as a confidential client (web app or web api).
You cannot authenticate with username and password when the app is a confidential client. Only public clients, sometimes known as native clients, can do U/P authentication.
Trying to Change to native client.
Refer to this link to try
I've registered a new web app in the https://portal.azure.com and I'm trying to access it through the DNN OAuth provider. Now, I've already added the https://www.dnn.pt/Login to the list of reply urls, but whenever I try to authenticate myself, I end up getting the AADSTS50011 error:
AADSTS50011: The reply address 'https://www.dnn.pt/Login' does not match the reply addresses configured for the application: 'XXXXXXXX'. More details: not specified
Btw, here's what my replyUrls looks like:
"replyUrls": [
"https://wwww.dnn.pt/Login"
],
And here's the URL that I'm using to get the authentication process rolling (removed the tenant id and app id from the url:
https://login.microsoftonline.com/{tenant id}/oauth2/authorize?scope=email&client_id={app id}&redirect_uri=https%3a%2f%2fwww.dnn.pt%2fLogin&state=Azure&response_type=code
I know that I'm doing something wrong, but can someone please point me in the right direction?
thanks guys!
As mentioned in the comment, you have an extra w in your replyUrls. Since the value mentioned there doesn't match with what's specified in the URL sent for authentication/authorization, you're getting this error.
Please change the replyUrls to:
"replyUrls": [
"https://www.dnn.pt/Login"
],
And that should fix the error.
I have obtained the access token via https://login.microsoftonline.com/common/oauth2/v2.0/token and with that token tried to send a message using this url https://apis.skype.com/v3/conversations/conversationId/activities/. But i am getting this error "401: The provided 'OAuth' ticket failed authentication.".
What could be the issue here