I'm trying to modify data in a cell range when changing the selection in a slicer.
Can this be done in Excel for Mac?
Yes, it is! As #BigBen had already mentioned, it is possible via the event Worksheet_PivotTableUpdate. This is also supported by Excel for Mac.
Private Sub Worksheet_PivotTableUpdate(ByVal Target As PivotTable)
End Sub
It is important that the code is defined in the corresponding sheet module
This macro works as intended, from a button on the Batch Input sheet:
Sub BatchTriggerOFF()
Sheets("Batch Input").Unprotect
Sheets("Batch Input").Range("G3:J3").Value = "Off"
Sheets("SQL LOGIC").Calculate
Sheets("Batch Input").Range("A12").Select
Sheets("Batch Input").Shapes.Range(Array("Group 12")).ZOrder msoSendToBack
Sheets("Batch Input").Protect
End Sub
However, when BatchTriggerOFF is called from a different sheet in the same workbook, the macro neither changes the Range("G3:J3").Value nor Shapes.Range(Array("Group 12")).ZOrder msoSendToBack. There is no error message.
If Sheets("SQL LOGIC").Range("B1") = "On" Then Call BatchTriggerOFF
I've tried unprotecting the Batch Input sheet beforehand, messing with Sheets("Batch Input").Activate, Sheets("Batch Input").Select, and even tried pasting the BatchTriggerOFF line by line VBA directly into the second macro, to no avail.
What is causing BatchTriggerOFF to seemingly not run when called from the second macro/sheet?
[...] something is inherently wrong with the second code I've provided, likely not actively running when the value in Range("B1") is changed?
Exactly. A procedure that's in a standard module needs something, somewhere to invoke it. Could be a shape or button on the worksheet, could be other VBA code, but something needs to invoke it somehow.
No procedure is going to just know to run when Range("B1") is changed on Sheets("SQL LOGIC"): you need to have code that's "triggered" when a cell is changed on that sheet.
The way to do this, is to handle the worksheet module's Change event. Find your "SQL LOGIC" sheet in the VBE's Project Explorer (Ctrl+R), double-click it. In the code-behind module for that specific worksheet, select Worksheet from the left-side dropdown at the top of the code pane; the right-side dropdown should say SelectionChange, and the VBE should have added a private procedure that looks like this:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
End Sub
Select Change from the right-side dropdown; the VBE creates a private procedure that looks like this:
Private Sub Worksheet_Change(ByVal Target As Range)
End Sub
Now delete the SelectionChange handler, you don't need it unless you need to track cells that the user has selected. Since we want to track cells that have changed, we'll use the Change worksheet event. This procedure will be invoked whenever the user or your code changes anything on that sheet.
Since we only care to run code when a specific cell is changed, we need a condition here, involving the Target parameter. Using the Application.Intersect function, we can get a Range object reference that's Nothing if the two specified ranges don't intersect; we can use this information to bail out if it's not B1 that changed:
If Application.Intersect(Me.Range("B1"), Target) Is Nothing Then Exit Sub
Any code written after that condition inside the Worksheet.Change event handler procedure, will only run after the value of cell B1 was modified - either by the user typing in a value, or by any other code writing to that cell (you need to toggle Application.EnableEvents off if you have to prevent firing that event when it's code doing the changes and you don't want the handler to run).
Now, it looks like cell B1 isn't going to change, rather, it looks like it contains a formula whose result might change after making changes to the "Batch Input" sheet.
If that's the case, then the Change event will not be fired when B1 recalculates and now evaluates to a new value, because the cell didn't change, only its result.
If that's your scenario, then you want to handle the Calculate worksheet event, and have that be your trigger:
Private Sub Worksheet_Calculate()
If Me.Range("B1").Value = "On" Then BatchTriggerOFF
End Sub
If you need your sub to be called from any (sheet) module, move it in a module! The function/sub in the sheet module cannot be called without specifying the module name where it belongs, like you will be able to do in a module.
I receive every week a file that has always the same structure and format and what I want to do is to get a message when double clicking in some the cells of one of the columns.
I have the code and it works but I have to paste everytime in the worksheet once I open it. I want make this code "generic" so I can use it automatically everytime I open one of these workbooks without having to copy every time or do anything rather than the double clicking to get the message.
Private Sub Worksheet_BeforeDoubleClick(ByVal target As Range, cancel As Boolean)
If Not Application.Intersect(target, myrange) Is Nothing Then
cancel = True
MsgBox "some message"
End If
End Sub
Some comments.. the sheet i need to work with it's always called the same and the column I need to work with is always the same too. The only change is the number of rows it contains.
After some research I don't know if I should do this in a class module or as an addi-in. I'm a begginer in VBA so this is out of my scope...yet.
Thanks!
I'd like to know on how to code a userform (VBA Excel) with automatically updating itself when the cell values has changed.
I have produced a button that will show the userform with labels and text boxes. But whenever i click it yes it shows up but i need to click the userform in order for me to see the values.
Need help.
Thank you in advance,
Tramyer
The Worksheet.Change event is fired everytime you change the contents of a cell on a given worksheet.
You can create an event handler in the worksheet module (usually labeled Sheet1, Sheet2 etc. in the VBA editor) that is called every time the event is fired:
Private Sub Worksheet_Change(ByVal Target As Range)
Debug.Print Target.Address
End Sub
This example just outputs the address of the cell that was changed, but you can adapt this to update your userform with the changed values instead.
I tried running the private sub code:
Private Sub Worksheet_Calculate()
Dim target As Range
Set target = Range("G3")
If Not Intersect(target, Range("G3")) Is Nothing Then
End If
End Sub
I am pulling a value from one sheet and putting it into another cell on a separate sheet. I want the VBA to run when the cell is automatically changed. When I tried the code above, nothing happened when I updated the cell.
From the sounds of things the issue seems to be that you're trying to put the code in a Module like a regular macro. To have it run based on a worksheet event, you need to have the code in that worksheet's code window (in the VBA window, there's the "Microsoft Excel Objects" folder, inside is the list of worksheets, double-click the worksheet to open it's code).
Once you've opened the worksheet's code, at the top of the window you should see two drop-downs. The left one should show "(General)". In that drop-down select "Worksheet" (should be the only option).
In the drop-down to the right of that, select "Change". Then you need to validate the Target is the right cell (If Target.Address = "$<Column letter>$<row #>"). Inside that If statement is where you'd nest your code to copy the value to the second worksheet