Related
I'm trying to write a small script to change the current directory to my project directory:
#!/bin/bash
cd /home/tree/projects/java
I saved this file as proj, added execute permission with chmod, and copied it to /usr/bin. When I call it by:
proj, it does nothing. What am I doing wrong?
Shell scripts are run inside a subshell, and each subshell has its own concept of what the current directory is. The cd succeeds, but as soon as the subshell exits, you're back in the interactive shell and nothing ever changed there.
One way to get around this is to use an alias instead:
alias proj="cd /home/tree/projects/java"
You're doing nothing wrong! You've changed the directory, but only within the subshell that runs the script.
You can run the script in your current process with the "dot" command:
. proj
But I'd prefer Greg's suggestion to use an alias in this simple case.
The cd in your script technically worked as it changed the directory of the shell that ran the script, but that was a separate process forked from your interactive shell.
A Posix-compatible way to solve this problem is to define a shell procedure rather than a shell-invoked command script.
jhome () {
cd /home/tree/projects/java
}
You can just type this in or put it in one of the various shell startup files.
The cd is done within the script's shell. When the script ends, that shell exits, and then you are left in the directory you were. "Source" the script, don't run it. Instead of:
./myscript.sh
do
. ./myscript.sh
(Notice the dot and space before the script name.)
To make a bash script that will cd to a select directory :
Create the script file
#!/bin/sh
# file : /scripts/cdjava
#
cd /home/askgelal/projects/java
Then create an alias in your startup file.
#!/bin/sh
# file /scripts/mastercode.sh
#
alias cdjava='. /scripts/cdjava'
I created a startup file where I dump all my aliases and custom functions.
Then I source this file into my .bashrc to have it set on each boot.
For example, create a master aliases/functions file: /scripts/mastercode.sh
(Put the alias in this file.)
Then at the end of your .bashrc file:
source /scripts/mastercode.sh
Now its easy to cd to your java directory, just type cdjava and you are there.
You can use . to execute a script in the current shell environment:
. script_name
or alternatively, its more readable but shell specific alias source:
source script_name
This avoids the subshell, and allows any variables or builtins (including cd) to affect the current shell instead.
Jeremy Ruten's idea of using a symlink triggered a thought that hasn't crossed any other answer. Use:
CDPATH=:$HOME/projects
The leading colon is important; it means that if there is a directory 'dir' in the current directory, then 'cd dir' will change to that, rather than hopping off somewhere else. With the value set as shown, you can do:
cd java
and, if there is no sub-directory called java in the current directory, then it will take you directly to $HOME/projects/java - no aliases, no scripts, no dubious execs or dot commands.
My $HOME is /Users/jleffler; my $CDPATH is:
:/Users/jleffler:/Users/jleffler/mail:/Users/jleffler/src:/Users/jleffler/src/perl:/Users/jleffler/src/sqltools:/Users/jleffler/lib:/Users/jleffler/doc:/Users/jleffler/work
Use exec bash at the end
A bash script operates on its current environment or on that of its
children, but never on its parent environment.
However, this question often gets asked because one wants to be left at a (new) bash prompt in a certain directory after execution of a bash script from within another directory.
If this is the case, simply execute a child bash instance at the end of the script:
#!/usr/bin/env bash
cd /home/tree/projects/java
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
exec bash
To return to the previous, parental bash instance, use Ctrl+D.
Update
At least with newer versions of bash, the exec on the last line is no longer required. Furthermore, the script could be made to work with whatever preferred shell by using the $SHELL environment variable. This then gives:
#!/usr/bin/env bash
cd desired/directory
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
$SHELL
I got my code to work by using. <your file name>
./<your file name> dose not work because it doesn't change your directory in the terminal it just changes the directory specific to that script.
Here is my program
#!/bin/bash
echo "Taking you to eclipse's workspace."
cd /Developer/Java/workspace
Here is my terminal
nova:~ Kael$
nova:~ Kael$ . workspace.sh
Taking you to eclipe's workspace.
nova:workspace Kael$
simply run:
cd /home/xxx/yyy && command_you_want
When you fire a shell script, it runs a new instance of that shell (/bin/bash). Thus, your script just fires up a shell, changes the directory and exits. Put another way, cd (and other such commands) within a shell script do not affect nor have access to the shell from which they were launched.
You can do following:
#!/bin/bash
cd /your/project/directory
# start another shell and replacing the current
exec /bin/bash
EDIT: This could be 'dotted' as well, to prevent creation of subsequent shells.
Example:
. ./previous_script (with or without the first line)
On my particular case i needed too many times to change for the same directory.
So on my .bashrc (I use ubuntu) i've added the
1 -
$ nano ~./bashrc
function switchp
{
cd /home/tree/projects/$1
}
2-
$ source ~/.bashrc
3 -
$ switchp java
Directly it will do: cd /home/tree/projects/java
Hope that helps!
It only changes the directory for the script itself, while your current directory stays the same.
You might want to use a symbolic link instead. It allows you to make a "shortcut" to a file or directory, so you'd only have to type something like cd my-project.
You can combine Adam & Greg's alias and dot approaches to make something that can be more dynamic—
alias project=". project"
Now running the project alias will execute the project script in the current shell as opposed to the subshell.
You can combine an alias and a script,
alias proj="cd \`/usr/bin/proj !*\`"
provided that the script echos the destination path. Note that those are backticks surrounding the script name.
For example, your script could be
#!/bin/bash
echo /home/askgelal/projects/java/$1
The advantage with this technique is that the script could take any number of command line parameters and emit different destinations calculated by possibly complex logic.
to navigate directories quicky, there's $CDPATH, cdargs, and ways to generate aliases automatically
http://jackndempsey.blogspot.com/2008/07/cdargs.html
http://muness.blogspot.com/2008/06/lazy-bash-cd-aliaes.html
https://web.archive.org/web/1/http://articles.techrepublic%2ecom%2ecom/5100-10878_11-5827311.html
In your ~/.bash_profile file. add the next function
move_me() {
cd ~/path/to/dest
}
Restart terminal and you can type
move_me
and you will be moved to the destination folder.
You can use the operator && :
cd myDirectory && ls
While sourcing the script you want to run is one solution, you should be aware that this script then can directly modify the environment of your current shell. Also it is not possible to pass arguments anymore.
Another way to do, is to implement your script as a function in bash.
function cdbm() {
cd whereever_you_want_to_go
echo "Arguments to the functions were $1, $2, ..."
}
This technique is used by autojump: http://github.com/joelthelion/autojump/wiki to provide you with learning shell directory bookmarks.
You can create a function like below in your .bash_profile and it will work smoothly.
The following function takes an optional parameter which is a project.
For example, you can just run
cdproj
or
cdproj project_name
Here is the function definition.
cdproj(){
dir=/Users/yourname/projects
if [ "$1" ]; then
cd "${dir}/${1}"
else
cd "${dir}"
fi
}
Dont forget to source your .bash_profile
This should do what you want. Change to the directory of interest (from within the script), and then spawn a new bash shell.
#!/bin/bash
# saved as mov_dir.sh
cd ~/mt/v3/rt_linux-rt-tools/
bash
If you run this, it will take you to the directory of interest and when you exit it it will bring you back to the original place.
root#intel-corei7-64:~# ./mov_dir.sh
root#intel-corei7-64:~/mt/v3/rt_linux-rt-tools# exit
root#intel-corei7-64:~#
This will even take you to back to your original directory when you exit (CTRL+d)
I did the following:
create a file called case
paste the following in the file:
#!/bin/sh
cd /home/"$1"
save it and then:
chmod +x case
I also created an alias in my .bashrc:
alias disk='cd /home/; . case'
now when I type:
case 12345
essentially I am typing:
cd /home/12345
You can type any folder after 'case':
case 12
case 15
case 17
which is like typing:
cd /home/12
cd /home/15
cd /home/17
respectively
In my case the path is much longer - these guys summed it up with the ~ info earlier.
As explained on the other answers, you have changed the directory, but only within the sub-shell that runs the script. this does not impact the parent shell.
One solution is to use bash functions instead of a bash script (sh); by placing your bash script code into a function. That makes the function available as a command and then, this will be executed without a child process and thus any cd command will impact the caller shell.
Bash functions :
One feature of the bash profile is to store custom functions that can be run in the terminal or in bash scripts the same way you run application/commands this also could be used as a shortcut for long commands.
To make your function efficient system widely you will need to copy your function at the end of several files
/home/user/.bashrc
/home/user/.bash_profile
/root/.bashrc
/root/.bash_profile
You can sudo kwrite /home/user/.bashrc /home/user/.bash_profile /root/.bashrc /root/.bash_profile to edit/create those files quickly
Howto :
Copy your bash script code inside a new function at the end of your bash's profile file and restart your terminal, you can then run cdd or whatever the function you wrote.
Script Example
Making shortcut to cd .. with cdd
cdd() {
cd ..
}
ls shortcut
ll() {
ls -l -h
}
ls shortcut
lll() {
ls -l -h -a
}
If you are using fish as your shell, the best solution is to create a function. As an example, given the original question, you could copy the 4 lines below and paste them into your fish command line:
function proj
cd /home/tree/projects/java
end
funcsave proj
This will create the function and save it for use later. If your project changes, just repeat the process using the new path.
If you prefer, you can manually add the function file by doing the following:
nano ~/.config/fish/functions/proj.fish
and enter the text:
function proj
cd /home/tree/projects/java
end
and finally press ctrl+x to exit and y followed by return to save your changes.
(NOTE: the first method of using funcsave creates the proj.fish file for you).
You need no script, only set the correct option and create an environment variable.
shopt -s cdable_vars
in your ~/.bashrc allows to cd to the content of environment variables.
Create such an environment variable:
export myjava="/home/tree/projects/java"
and you can use:
cd myjava
Other alternatives.
Note the discussion How do I set the working directory of the parent process?
It contains some hackish answers, e.g.
https://stackoverflow.com/a/2375174/755804 (changing the parent process directory via gdb, don't do this) and https://stackoverflow.com/a/51985735/755804 (the command tailcd that injects cd dirname to the input stream of the parent process; well, ideally it should be a part of bash rather than a hack)
It is an old question, but I am really surprised I don't see this trick here
Instead of using cd you can use
export PWD=the/path/you/want
No need to create subshells or use aliases.
Note that it is your responsibility to make sure the/path/you/want exists.
I have to work in tcsh, and I know this is not an elegant solution, but for example, if I had to change folders to a path where one word is different, the whole thing can be done in the alias
a alias_name 'set a = `pwd`; set b = `echo $a | replace "Trees" "Tests"` ; cd $b'
If the path is always fixed, the just
a alias_name2 'cd path/you/always/need'
should work
In the line above, the new folder path is set
This combines the answer by Serge with an unrelated answer by David. It changes the directory, and then instead of forcing a bash shell, it launches the user's default shell. It however requires both getent and /etc/passwd to detect the default shell.
#!/usr/bin/env bash
cd desired/directory
USER_SHELL=$(getent passwd <USER> | cut -d : -f 7)
$USER_SHELL
Of course this still has the same deficiency of creating a nested shell.
I'm trying to write a small script to change the current directory to my project directory:
#!/bin/bash
cd /home/tree/projects/java
I saved this file as proj, added execute permission with chmod, and copied it to /usr/bin. When I call it by:
proj, it does nothing. What am I doing wrong?
Shell scripts are run inside a subshell, and each subshell has its own concept of what the current directory is. The cd succeeds, but as soon as the subshell exits, you're back in the interactive shell and nothing ever changed there.
One way to get around this is to use an alias instead:
alias proj="cd /home/tree/projects/java"
You're doing nothing wrong! You've changed the directory, but only within the subshell that runs the script.
You can run the script in your current process with the "dot" command:
. proj
But I'd prefer Greg's suggestion to use an alias in this simple case.
The cd in your script technically worked as it changed the directory of the shell that ran the script, but that was a separate process forked from your interactive shell.
A Posix-compatible way to solve this problem is to define a shell procedure rather than a shell-invoked command script.
jhome () {
cd /home/tree/projects/java
}
You can just type this in or put it in one of the various shell startup files.
The cd is done within the script's shell. When the script ends, that shell exits, and then you are left in the directory you were. "Source" the script, don't run it. Instead of:
./myscript.sh
do
. ./myscript.sh
(Notice the dot and space before the script name.)
To make a bash script that will cd to a select directory :
Create the script file
#!/bin/sh
# file : /scripts/cdjava
#
cd /home/askgelal/projects/java
Then create an alias in your startup file.
#!/bin/sh
# file /scripts/mastercode.sh
#
alias cdjava='. /scripts/cdjava'
I created a startup file where I dump all my aliases and custom functions.
Then I source this file into my .bashrc to have it set on each boot.
For example, create a master aliases/functions file: /scripts/mastercode.sh
(Put the alias in this file.)
Then at the end of your .bashrc file:
source /scripts/mastercode.sh
Now its easy to cd to your java directory, just type cdjava and you are there.
You can use . to execute a script in the current shell environment:
. script_name
or alternatively, its more readable but shell specific alias source:
source script_name
This avoids the subshell, and allows any variables or builtins (including cd) to affect the current shell instead.
Jeremy Ruten's idea of using a symlink triggered a thought that hasn't crossed any other answer. Use:
CDPATH=:$HOME/projects
The leading colon is important; it means that if there is a directory 'dir' in the current directory, then 'cd dir' will change to that, rather than hopping off somewhere else. With the value set as shown, you can do:
cd java
and, if there is no sub-directory called java in the current directory, then it will take you directly to $HOME/projects/java - no aliases, no scripts, no dubious execs or dot commands.
My $HOME is /Users/jleffler; my $CDPATH is:
:/Users/jleffler:/Users/jleffler/mail:/Users/jleffler/src:/Users/jleffler/src/perl:/Users/jleffler/src/sqltools:/Users/jleffler/lib:/Users/jleffler/doc:/Users/jleffler/work
Use exec bash at the end
A bash script operates on its current environment or on that of its
children, but never on its parent environment.
However, this question often gets asked because one wants to be left at a (new) bash prompt in a certain directory after execution of a bash script from within another directory.
If this is the case, simply execute a child bash instance at the end of the script:
#!/usr/bin/env bash
cd /home/tree/projects/java
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
exec bash
To return to the previous, parental bash instance, use Ctrl+D.
Update
At least with newer versions of bash, the exec on the last line is no longer required. Furthermore, the script could be made to work with whatever preferred shell by using the $SHELL environment variable. This then gives:
#!/usr/bin/env bash
cd desired/directory
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
$SHELL
I got my code to work by using. <your file name>
./<your file name> dose not work because it doesn't change your directory in the terminal it just changes the directory specific to that script.
Here is my program
#!/bin/bash
echo "Taking you to eclipse's workspace."
cd /Developer/Java/workspace
Here is my terminal
nova:~ Kael$
nova:~ Kael$ . workspace.sh
Taking you to eclipe's workspace.
nova:workspace Kael$
simply run:
cd /home/xxx/yyy && command_you_want
When you fire a shell script, it runs a new instance of that shell (/bin/bash). Thus, your script just fires up a shell, changes the directory and exits. Put another way, cd (and other such commands) within a shell script do not affect nor have access to the shell from which they were launched.
You can do following:
#!/bin/bash
cd /your/project/directory
# start another shell and replacing the current
exec /bin/bash
EDIT: This could be 'dotted' as well, to prevent creation of subsequent shells.
Example:
. ./previous_script (with or without the first line)
On my particular case i needed too many times to change for the same directory.
So on my .bashrc (I use ubuntu) i've added the
1 -
$ nano ~./bashrc
function switchp
{
cd /home/tree/projects/$1
}
2-
$ source ~/.bashrc
3 -
$ switchp java
Directly it will do: cd /home/tree/projects/java
Hope that helps!
It only changes the directory for the script itself, while your current directory stays the same.
You might want to use a symbolic link instead. It allows you to make a "shortcut" to a file or directory, so you'd only have to type something like cd my-project.
You can combine Adam & Greg's alias and dot approaches to make something that can be more dynamic—
alias project=". project"
Now running the project alias will execute the project script in the current shell as opposed to the subshell.
You can combine an alias and a script,
alias proj="cd \`/usr/bin/proj !*\`"
provided that the script echos the destination path. Note that those are backticks surrounding the script name.
For example, your script could be
#!/bin/bash
echo /home/askgelal/projects/java/$1
The advantage with this technique is that the script could take any number of command line parameters and emit different destinations calculated by possibly complex logic.
to navigate directories quicky, there's $CDPATH, cdargs, and ways to generate aliases automatically
http://jackndempsey.blogspot.com/2008/07/cdargs.html
http://muness.blogspot.com/2008/06/lazy-bash-cd-aliaes.html
https://web.archive.org/web/1/http://articles.techrepublic%2ecom%2ecom/5100-10878_11-5827311.html
In your ~/.bash_profile file. add the next function
move_me() {
cd ~/path/to/dest
}
Restart terminal and you can type
move_me
and you will be moved to the destination folder.
You can use the operator && :
cd myDirectory && ls
While sourcing the script you want to run is one solution, you should be aware that this script then can directly modify the environment of your current shell. Also it is not possible to pass arguments anymore.
Another way to do, is to implement your script as a function in bash.
function cdbm() {
cd whereever_you_want_to_go
echo "Arguments to the functions were $1, $2, ..."
}
This technique is used by autojump: http://github.com/joelthelion/autojump/wiki to provide you with learning shell directory bookmarks.
You can create a function like below in your .bash_profile and it will work smoothly.
The following function takes an optional parameter which is a project.
For example, you can just run
cdproj
or
cdproj project_name
Here is the function definition.
cdproj(){
dir=/Users/yourname/projects
if [ "$1" ]; then
cd "${dir}/${1}"
else
cd "${dir}"
fi
}
Dont forget to source your .bash_profile
This should do what you want. Change to the directory of interest (from within the script), and then spawn a new bash shell.
#!/bin/bash
# saved as mov_dir.sh
cd ~/mt/v3/rt_linux-rt-tools/
bash
If you run this, it will take you to the directory of interest and when you exit it it will bring you back to the original place.
root#intel-corei7-64:~# ./mov_dir.sh
root#intel-corei7-64:~/mt/v3/rt_linux-rt-tools# exit
root#intel-corei7-64:~#
This will even take you to back to your original directory when you exit (CTRL+d)
I did the following:
create a file called case
paste the following in the file:
#!/bin/sh
cd /home/"$1"
save it and then:
chmod +x case
I also created an alias in my .bashrc:
alias disk='cd /home/; . case'
now when I type:
case 12345
essentially I am typing:
cd /home/12345
You can type any folder after 'case':
case 12
case 15
case 17
which is like typing:
cd /home/12
cd /home/15
cd /home/17
respectively
In my case the path is much longer - these guys summed it up with the ~ info earlier.
As explained on the other answers, you have changed the directory, but only within the sub-shell that runs the script. this does not impact the parent shell.
One solution is to use bash functions instead of a bash script (sh); by placing your bash script code into a function. That makes the function available as a command and then, this will be executed without a child process and thus any cd command will impact the caller shell.
Bash functions :
One feature of the bash profile is to store custom functions that can be run in the terminal or in bash scripts the same way you run application/commands this also could be used as a shortcut for long commands.
To make your function efficient system widely you will need to copy your function at the end of several files
/home/user/.bashrc
/home/user/.bash_profile
/root/.bashrc
/root/.bash_profile
You can sudo kwrite /home/user/.bashrc /home/user/.bash_profile /root/.bashrc /root/.bash_profile to edit/create those files quickly
Howto :
Copy your bash script code inside a new function at the end of your bash's profile file and restart your terminal, you can then run cdd or whatever the function you wrote.
Script Example
Making shortcut to cd .. with cdd
cdd() {
cd ..
}
ls shortcut
ll() {
ls -l -h
}
ls shortcut
lll() {
ls -l -h -a
}
If you are using fish as your shell, the best solution is to create a function. As an example, given the original question, you could copy the 4 lines below and paste them into your fish command line:
function proj
cd /home/tree/projects/java
end
funcsave proj
This will create the function and save it for use later. If your project changes, just repeat the process using the new path.
If you prefer, you can manually add the function file by doing the following:
nano ~/.config/fish/functions/proj.fish
and enter the text:
function proj
cd /home/tree/projects/java
end
and finally press ctrl+x to exit and y followed by return to save your changes.
(NOTE: the first method of using funcsave creates the proj.fish file for you).
You need no script, only set the correct option and create an environment variable.
shopt -s cdable_vars
in your ~/.bashrc allows to cd to the content of environment variables.
Create such an environment variable:
export myjava="/home/tree/projects/java"
and you can use:
cd myjava
Other alternatives.
Note the discussion How do I set the working directory of the parent process?
It contains some hackish answers, e.g.
https://stackoverflow.com/a/2375174/755804 (changing the parent process directory via gdb, don't do this) and https://stackoverflow.com/a/51985735/755804 (the command tailcd that injects cd dirname to the input stream of the parent process; well, ideally it should be a part of bash rather than a hack)
It is an old question, but I am really surprised I don't see this trick here
Instead of using cd you can use
export PWD=the/path/you/want
No need to create subshells or use aliases.
Note that it is your responsibility to make sure the/path/you/want exists.
I have to work in tcsh, and I know this is not an elegant solution, but for example, if I had to change folders to a path where one word is different, the whole thing can be done in the alias
a alias_name 'set a = `pwd`; set b = `echo $a | replace "Trees" "Tests"` ; cd $b'
If the path is always fixed, the just
a alias_name2 'cd path/you/always/need'
should work
In the line above, the new folder path is set
This combines the answer by Serge with an unrelated answer by David. It changes the directory, and then instead of forcing a bash shell, it launches the user's default shell. It however requires both getent and /etc/passwd to detect the default shell.
#!/usr/bin/env bash
cd desired/directory
USER_SHELL=$(getent passwd <USER> | cut -d : -f 7)
$USER_SHELL
Of course this still has the same deficiency of creating a nested shell.
I'm trying to write a small script to change the current directory to my project directory:
#!/bin/bash
cd /home/tree/projects/java
I saved this file as proj, added execute permission with chmod, and copied it to /usr/bin. When I call it by:
proj, it does nothing. What am I doing wrong?
Shell scripts are run inside a subshell, and each subshell has its own concept of what the current directory is. The cd succeeds, but as soon as the subshell exits, you're back in the interactive shell and nothing ever changed there.
One way to get around this is to use an alias instead:
alias proj="cd /home/tree/projects/java"
You're doing nothing wrong! You've changed the directory, but only within the subshell that runs the script.
You can run the script in your current process with the "dot" command:
. proj
But I'd prefer Greg's suggestion to use an alias in this simple case.
The cd in your script technically worked as it changed the directory of the shell that ran the script, but that was a separate process forked from your interactive shell.
A Posix-compatible way to solve this problem is to define a shell procedure rather than a shell-invoked command script.
jhome () {
cd /home/tree/projects/java
}
You can just type this in or put it in one of the various shell startup files.
The cd is done within the script's shell. When the script ends, that shell exits, and then you are left in the directory you were. "Source" the script, don't run it. Instead of:
./myscript.sh
do
. ./myscript.sh
(Notice the dot and space before the script name.)
To make a bash script that will cd to a select directory :
Create the script file
#!/bin/sh
# file : /scripts/cdjava
#
cd /home/askgelal/projects/java
Then create an alias in your startup file.
#!/bin/sh
# file /scripts/mastercode.sh
#
alias cdjava='. /scripts/cdjava'
I created a startup file where I dump all my aliases and custom functions.
Then I source this file into my .bashrc to have it set on each boot.
For example, create a master aliases/functions file: /scripts/mastercode.sh
(Put the alias in this file.)
Then at the end of your .bashrc file:
source /scripts/mastercode.sh
Now its easy to cd to your java directory, just type cdjava and you are there.
You can use . to execute a script in the current shell environment:
. script_name
or alternatively, its more readable but shell specific alias source:
source script_name
This avoids the subshell, and allows any variables or builtins (including cd) to affect the current shell instead.
Jeremy Ruten's idea of using a symlink triggered a thought that hasn't crossed any other answer. Use:
CDPATH=:$HOME/projects
The leading colon is important; it means that if there is a directory 'dir' in the current directory, then 'cd dir' will change to that, rather than hopping off somewhere else. With the value set as shown, you can do:
cd java
and, if there is no sub-directory called java in the current directory, then it will take you directly to $HOME/projects/java - no aliases, no scripts, no dubious execs or dot commands.
My $HOME is /Users/jleffler; my $CDPATH is:
:/Users/jleffler:/Users/jleffler/mail:/Users/jleffler/src:/Users/jleffler/src/perl:/Users/jleffler/src/sqltools:/Users/jleffler/lib:/Users/jleffler/doc:/Users/jleffler/work
Use exec bash at the end
A bash script operates on its current environment or on that of its
children, but never on its parent environment.
However, this question often gets asked because one wants to be left at a (new) bash prompt in a certain directory after execution of a bash script from within another directory.
If this is the case, simply execute a child bash instance at the end of the script:
#!/usr/bin/env bash
cd /home/tree/projects/java
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
exec bash
To return to the previous, parental bash instance, use Ctrl+D.
Update
At least with newer versions of bash, the exec on the last line is no longer required. Furthermore, the script could be made to work with whatever preferred shell by using the $SHELL environment variable. This then gives:
#!/usr/bin/env bash
cd desired/directory
echo -e '\nHit [Ctrl]+[D] to exit this child shell.'
$SHELL
I got my code to work by using. <your file name>
./<your file name> dose not work because it doesn't change your directory in the terminal it just changes the directory specific to that script.
Here is my program
#!/bin/bash
echo "Taking you to eclipse's workspace."
cd /Developer/Java/workspace
Here is my terminal
nova:~ Kael$
nova:~ Kael$ . workspace.sh
Taking you to eclipe's workspace.
nova:workspace Kael$
simply run:
cd /home/xxx/yyy && command_you_want
When you fire a shell script, it runs a new instance of that shell (/bin/bash). Thus, your script just fires up a shell, changes the directory and exits. Put another way, cd (and other such commands) within a shell script do not affect nor have access to the shell from which they were launched.
You can do following:
#!/bin/bash
cd /your/project/directory
# start another shell and replacing the current
exec /bin/bash
EDIT: This could be 'dotted' as well, to prevent creation of subsequent shells.
Example:
. ./previous_script (with or without the first line)
On my particular case i needed too many times to change for the same directory.
So on my .bashrc (I use ubuntu) i've added the
1 -
$ nano ~./bashrc
function switchp
{
cd /home/tree/projects/$1
}
2-
$ source ~/.bashrc
3 -
$ switchp java
Directly it will do: cd /home/tree/projects/java
Hope that helps!
It only changes the directory for the script itself, while your current directory stays the same.
You might want to use a symbolic link instead. It allows you to make a "shortcut" to a file or directory, so you'd only have to type something like cd my-project.
You can combine Adam & Greg's alias and dot approaches to make something that can be more dynamic—
alias project=". project"
Now running the project alias will execute the project script in the current shell as opposed to the subshell.
You can combine an alias and a script,
alias proj="cd \`/usr/bin/proj !*\`"
provided that the script echos the destination path. Note that those are backticks surrounding the script name.
For example, your script could be
#!/bin/bash
echo /home/askgelal/projects/java/$1
The advantage with this technique is that the script could take any number of command line parameters and emit different destinations calculated by possibly complex logic.
to navigate directories quicky, there's $CDPATH, cdargs, and ways to generate aliases automatically
http://jackndempsey.blogspot.com/2008/07/cdargs.html
http://muness.blogspot.com/2008/06/lazy-bash-cd-aliaes.html
https://web.archive.org/web/1/http://articles.techrepublic%2ecom%2ecom/5100-10878_11-5827311.html
In your ~/.bash_profile file. add the next function
move_me() {
cd ~/path/to/dest
}
Restart terminal and you can type
move_me
and you will be moved to the destination folder.
You can use the operator && :
cd myDirectory && ls
While sourcing the script you want to run is one solution, you should be aware that this script then can directly modify the environment of your current shell. Also it is not possible to pass arguments anymore.
Another way to do, is to implement your script as a function in bash.
function cdbm() {
cd whereever_you_want_to_go
echo "Arguments to the functions were $1, $2, ..."
}
This technique is used by autojump: http://github.com/joelthelion/autojump/wiki to provide you with learning shell directory bookmarks.
You can create a function like below in your .bash_profile and it will work smoothly.
The following function takes an optional parameter which is a project.
For example, you can just run
cdproj
or
cdproj project_name
Here is the function definition.
cdproj(){
dir=/Users/yourname/projects
if [ "$1" ]; then
cd "${dir}/${1}"
else
cd "${dir}"
fi
}
Dont forget to source your .bash_profile
This should do what you want. Change to the directory of interest (from within the script), and then spawn a new bash shell.
#!/bin/bash
# saved as mov_dir.sh
cd ~/mt/v3/rt_linux-rt-tools/
bash
If you run this, it will take you to the directory of interest and when you exit it it will bring you back to the original place.
root#intel-corei7-64:~# ./mov_dir.sh
root#intel-corei7-64:~/mt/v3/rt_linux-rt-tools# exit
root#intel-corei7-64:~#
This will even take you to back to your original directory when you exit (CTRL+d)
I did the following:
create a file called case
paste the following in the file:
#!/bin/sh
cd /home/"$1"
save it and then:
chmod +x case
I also created an alias in my .bashrc:
alias disk='cd /home/; . case'
now when I type:
case 12345
essentially I am typing:
cd /home/12345
You can type any folder after 'case':
case 12
case 15
case 17
which is like typing:
cd /home/12
cd /home/15
cd /home/17
respectively
In my case the path is much longer - these guys summed it up with the ~ info earlier.
As explained on the other answers, you have changed the directory, but only within the sub-shell that runs the script. this does not impact the parent shell.
One solution is to use bash functions instead of a bash script (sh); by placing your bash script code into a function. That makes the function available as a command and then, this will be executed without a child process and thus any cd command will impact the caller shell.
Bash functions :
One feature of the bash profile is to store custom functions that can be run in the terminal or in bash scripts the same way you run application/commands this also could be used as a shortcut for long commands.
To make your function efficient system widely you will need to copy your function at the end of several files
/home/user/.bashrc
/home/user/.bash_profile
/root/.bashrc
/root/.bash_profile
You can sudo kwrite /home/user/.bashrc /home/user/.bash_profile /root/.bashrc /root/.bash_profile to edit/create those files quickly
Howto :
Copy your bash script code inside a new function at the end of your bash's profile file and restart your terminal, you can then run cdd or whatever the function you wrote.
Script Example
Making shortcut to cd .. with cdd
cdd() {
cd ..
}
ls shortcut
ll() {
ls -l -h
}
ls shortcut
lll() {
ls -l -h -a
}
If you are using fish as your shell, the best solution is to create a function. As an example, given the original question, you could copy the 4 lines below and paste them into your fish command line:
function proj
cd /home/tree/projects/java
end
funcsave proj
This will create the function and save it for use later. If your project changes, just repeat the process using the new path.
If you prefer, you can manually add the function file by doing the following:
nano ~/.config/fish/functions/proj.fish
and enter the text:
function proj
cd /home/tree/projects/java
end
and finally press ctrl+x to exit and y followed by return to save your changes.
(NOTE: the first method of using funcsave creates the proj.fish file for you).
You need no script, only set the correct option and create an environment variable.
shopt -s cdable_vars
in your ~/.bashrc allows to cd to the content of environment variables.
Create such an environment variable:
export myjava="/home/tree/projects/java"
and you can use:
cd myjava
Other alternatives.
Note the discussion How do I set the working directory of the parent process?
It contains some hackish answers, e.g.
https://stackoverflow.com/a/2375174/755804 (changing the parent process directory via gdb, don't do this) and https://stackoverflow.com/a/51985735/755804 (the command tailcd that injects cd dirname to the input stream of the parent process; well, ideally it should be a part of bash rather than a hack)
It is an old question, but I am really surprised I don't see this trick here
Instead of using cd you can use
export PWD=the/path/you/want
No need to create subshells or use aliases.
Note that it is your responsibility to make sure the/path/you/want exists.
I have to work in tcsh, and I know this is not an elegant solution, but for example, if I had to change folders to a path where one word is different, the whole thing can be done in the alias
a alias_name 'set a = `pwd`; set b = `echo $a | replace "Trees" "Tests"` ; cd $b'
If the path is always fixed, the just
a alias_name2 'cd path/you/always/need'
should work
In the line above, the new folder path is set
This combines the answer by Serge with an unrelated answer by David. It changes the directory, and then instead of forcing a bash shell, it launches the user's default shell. It however requires both getent and /etc/passwd to detect the default shell.
#!/usr/bin/env bash
cd desired/directory
USER_SHELL=$(getent passwd <USER> | cut -d : -f 7)
$USER_SHELL
Of course this still has the same deficiency of creating a nested shell.
I am not able to run gvim from cygwin. When I try to open a new file with :
gvim filename
gvim opens a file with 'No name' and displays error as :
Error detected while processing command line
E492: Not editor command: C:\cygwin\home\chandan\l
Press enter or type command to continue
More problematic is that I can't open existing file in the path
>which gvim shows /usr/bin/gvim
I have put alias gvim=/cygdrive/c/Program\Files\(x86\)/Vim/vim73/gvim.exe still
I wrote cyg-wrapper.sh for this sole purpose.
It supports:
symbolic links
options that must not be interpreted as pathnames (see -c with gvim, or any flags starting with a minus sign).
In other words, it enables us to type:
gvim /etc/profile -c /PS1 -c "echo 'correctly opened'"
# or even:
cd ~/tmp ; ln -s ~/bin/cyg-wrapper.sh
gvim -d http://hermitte.free.fr/cygwin/cyg-wrapper.sh cyg-wrapper.sh
explorer -e
explorer "$vim"
explorer http://hermitte.free.fr/
Note: I use the following function in my .profile to run gvim with cyg-wrapper.sh
gvim() {
opt=''
if [ `expr "$*" : '.*tex\>'` -gt 0 ] ; then
opt='--servername LATEX '
fi
cyg-wrapper.sh "C:/Progra~1/Edition/vim/vim73/gvim.exe" --binary-opt=-c,--cmd,-T,-t,--servername,--remote-send,--remote-expr --cyg-verbose --fork=2 $opt "$#"
}
EDIT: Currently (Sept 26 2014, using Vim 7.4), Windows gVim uses C:\Windows\gvim.bat to launch gVim from the command line. Replacing the gvim.exe path in the gvim() function with this script allows launching gvim without changing the path to match the current Vim version (which may actually be in Progra~2); however, it appears to also open a superfluous cmd.exe window.
Found this thread, I find the answer from jens unacceptable. We're not asking to be told not to do it. I didn't like the other answers either there was always some quirk, like settings not used or an extra command line window popping up. I Did some digging and this works for me. No extra command line box for nothing and it uses my proper gvim settings.
alias gvim='HOME=/cygdrive/p/ cygstart /cygdrive/c/Program\ Files\ \(x86\)/Vim/vim74/gvim.exe'
You simply need to alter the HOME to your own. To find out what to put there run gvim from windows then put in ":echo $HOME" and hit enter in my case it shows P:\ so that translates to /cygdrive/p/
Also if your gvim.exe is in a different directory/version you'll need to adjust.
Now when I type 'gvim script.sh' at a cygwin command prompt it launches gvim with the file, all nice and neat!
UPDATE
I found a slightly better way to do this. Using the alias was tying up my session that I ran the gvim from, I wanted it to launch as a separate process, using "gvim &" is inelegant as it lists job number when launching and displays a "done" line when completed. I'm too fussy so I figured out how to get that all tidy by using a function.
Just add this to your .bash_functions file, it builds on the previous section regarding home directory and backslash use.
gvim() {
ORIGHOME=$HOME
HOME=/cygdrive/p/
/cygdrive/c/Program\ Files\ \(x86\)/Vim/vim74/gvim.exe $1 & disown
HOME=$ORIGHOME
} 2>/dev/null
UPDATE 2 for babun users!
Ok since having wrestled with this originally I have ended up scrapping the original cygwin install in favor of babun which seems to be a less troublesome setup for those wanting linux functionality in windows without a full blown virtual. Of course my gvim launch script broke, and I had to do the following in my .zshrc file (babun uses zsh, at first I resisted and switched it to bash but then relented as I figured they must have reason, and they did, I like it)
gvim() {
OLD_HOME=$HOME
OLD_VIMRUNTIME=$VIMRUNTIME
export HOME=/cygdrive/c/Users/gmitchell/
export VIMRUNTIME="C:\Program Files (x86)\VIM\vim74"
TARGET=$(cygpath -w $1)
(/cygdrive/c/Program\ Files\ \(x86\)/Vim/vim74/gvim.exe $TARGET &)
export HOME=$OLD_HOME
export VIMRUNTIME=$OLD_VIMRUNTIME
}
*Note: the surrounding curved braces ( ) stops the job id from messing up your clean shell, and you no longer need the "disown"
P.S. The only remaining annoyance with this now is that you cannot "exit" the babun shell until all gvim instances you've launched are closed. Maybe someone can figure that own out. I've tried. When you type exit it just hangs there until you've exited all gvims.
Do yourself a favor, don't attempt to run a windows gvim from cygwin. The set of environment variables is likely completely different, and the pain of backslash directory separators, blanks in filenames, inability to understand /cygwin paths makes this an exercise in futility.
Then, what? Install the cygwin version of gvim and forget about all these problems.
Here is all you need to do:
alias gvim="run.exe /cygdrive/c/Programming/Tools/Vim/vim74/gvim.exe"
Works also with Notepad++, like so:
alias np="run.exe /cygdrive/c/Programming/Tools/Notepad++/notepad++.exe"
I have the same problem
because of the $SHELL var
so, I simple do like this
alias gvim='cmd /c "set SHELL=cmd & start gvim"'
It works for me, may be this will be help you too.
and maybe you want use the same alias for vim.
I put the following function in my .bashrc:
function gvim
{
GVIM_CMD=/cygdrive/c/path/to/gVimPortable.exe
if [[ -z "$1" ]]
then
$GVIM_CMD
else
$GVIM_CMD `cygpath -w $1`
fi
}
This allows me to launch gVim from anywhere.
It works fine for files with spaces, too...
This is a take off on low351's answer. I was unhappy with leaving HOME changed in the cygwin terminal, since I use that locally for a cygwin HOME, not my windows home. But gvim is all setup using Windows HOME. I added this to my .zshrc:
# run windows gvim from command line
gvim() {
local OLD_HOME=$HOME
HOME=/cygdrive/c/Users/jason/
local TARGET=$(cygpath -w $1)
/cygdrive/c/Program\ Files\ \(x86\)/Vim/vim74/gvim.exe $TARGET & disown
HOME=$OLD_HOME
} 2>/dev/null
really, just storing and restoring HOME. Being local, OLD_HOME goes away when the function returns, so it doesn't pollute the environment. If you're editing a cygwin file, running it through cygpath -w will make it a file path that windows gvim understands. It also lets you use window paths (e.g. C:/tmp/foo.txt) but w/ unix '/' separators, so you can dispense with /cygdrive/c. I believe this is all compatible w/ bash. This gives the following output:
> gvim
[2] 5060
>
It seems like the main problem is the HOME and VIM variables which are appropriate to the cygwin environment get exported when running Windows gvim, causing problems because Windows gvim knows nothing of cygwin. This fixes it:
alias gvim='env -u HOME -u VIM /cygdrive/c/Program\ Files\ \(x86\)/Vim/vim74/gvim.exe'
I have Windows gvim set as the default application (in Windows) for many filetypes, so Windows gvim frequently gets opened via the open alias. This fixes that use case:
alias open='env -u HOME -u VIM cygstart'
I just renamed gvim.bat which comes with the standard Win32 vim installation to gvim and put it into /usr/bin.
I am also sharing settings beetween Win32 GVim and Cygwin VIM referring to this article:
http://vim.wikia.com/wiki/Synchronize_configuration_to_many_computers
This way i can have both Vim and Win32 Gvim running with the same plugins and settings.
Since I've tried all of these and had issues I'll show what I'm using. I wrote it in ruby and it handles everything I throw at it (files, directories, or nothing) without any errors/popups/etc.
I saved it as gvim in ~/Dropbox/bin/cygwin/ (which is in my PATH)
#!/usr/bin/env ruby
args=''
filepath=''
arg=ARGV[0]
if arg
if File.exist? arg
if File.file? arg
args+="--remote-tab-silent "
end
filepath=`cygpath -w '#{arg}'`.strip
filepath="'#{filepath}'"
end
else
end
exe="'/c/Program\ Files\ \(x86\)/vim/vim73/gvim.exe' #{args} #{filepath}"
spawn exe
Here's the script I use for ~/bin/gvim. It runs it as if I called gvim FOO from the "Run" dialog (thanks to the batch file being invoked by explorer.exe). Can't play too nicely with the command line, but a self-deleting batch file comes to the rescue.
#!/bin/bash
TEMPFILE_NAME=gvim-`date +%s`-${RANDOM}.bat
TEMPFILE=$TMP/$TEMPFILE_NAME
TEMPFILE_W=`cygpath --windows --absolute --long-name "$TEMPFILE"`
TARGET=
if [ "$1" = "" ] ; then
TARGET=`cygpath --windows --absolute --long-name "."`
else
TARGET=`cygpath --windows --absolute --long-name "$#" | tr '\n' ' '`
fi
WIN_GVIM=`where gvim.exe | tr -d '\r\n'`
WIN_GVIM=`cygpath "$WIN_GVIM" --windows --absolute --long-name`
unix2dos > $TEMPFILE << EOF
start "gvim" "$WIN_GVIM" $TARGET
DEL %~f0
EOF
chmod +x $TEMPFILE
explorer.exe "$TEMPFILE_W"
Special thanks to this answer for the explorer.exe technique.
i have very simple shell script
#!/bin/bash
cp -rf /var/www/ksite/app2/* /var/www/ksite/app
echo "----"
echo "done"
but seems cp command fails
if i execute
cp -rf /var/www/ksite/app2/* /var/www/ksite/app
from terminal everything work ok. Can someone tell me how to include cp in shell script?
Thanks
We seem to have doubt as to how this script fails. If there is no error message then this is a strange one. I suggest:
On the command line (which works), do a which cp
Whatever the reply, then copy that and use it as the cp in the script (e.g. /bin/cp)
Check the widcard expansion, run your script with bash -x script-name and see if you get what you expect.
echo $? after the copy in the script - if it is zero then it (thinks it) worked.
Do a ls -ld /var/www/ksite/app from your script, maybe someone set a symbolic link?
If it still fails, source the script from the command-line and see if that works . script-name
Double check that the copy did actually fail! (maybe that should be step 1.)
Make sure you really have bash at /bin/bash. I think a batter hash bang is:
#!/usr/bin/env bash
This uses the env command to locate the bash binary and set the environment.
I had similar problem. What helped me:
I used windows and putty to write script, so I had \r\n at the end of lines. Be sure, you have only \n symbol.
I copied files and the only way it worked for me at script was cp <source_dir>/fileName <dest_dir>/fileName whereas at command line cp <source_dir>/fileName <dest_dir> worked well too.
Just covering all the bases .. do the permissions vary between the excutions .. i.e. do you execute one with sudo/root privileges, the other as user (unlikely, but thought I'd ask since we don't know what the exact error is)
Similar issue to Vladmir where the script was created in Windows. I created a new file "my_bash_script.sh" in the linux environment using VIM, then read the contents of my script into the file:
:r file_made_in_windows.sh
Then I saved, closed, then set the file as executable:
chmod 744 my_bash_script.sh
From there, I ran the script:
./my_bash_script.sh
...and it worked. What a weird issue. I was confounded for a moment.