I have a Veracode plugin in my VS 2013 Professional.
I have ucommerce.dll, Sitecore.Kernel and Sitecore.Analytics.dll
I set copy local true for all above dll files.
When i tried to pre-compile all the web project I'm getting a below error message
1>------ Pre-compile started: Project: XXXXX.Web.PQRPorta\ ------
1>Pre-compiling with command similar to the following:
C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_compiler.exe -p
"C:/XXXXX.Web.PQRPortal" -v "XXXXX.Web.PQRPortal/" -fixednames -f -c
-d "C:/SVN/trunk/Releases/SourceCode/Source/PrecompiledWeb/XXXXX.Web.PQRPortal"
1>error ASPCONFIG: Could not autodiscover 'components.config'. Make
sure it's present in the application folder
'C:\SVN\trunk\Releases\SourceCode\Source\XXXXX.Web.PQRPortal\' or in a
sub folder. Paths ignored
''C:\SVN\trunk\Releases\SourceCode\Source\XXXXX.Web.PQRPortal\bin',
'C:\SVN\trunk\Releases\SourceCode\Source\XXXXX.Web.PQRPortal\App_Data',
'C:\SVN\trunk\Releases\SourceCode\Source\XXXXX.Web.PQRPortal\obj''
1>XXXXX.Web.PQRPortal\ - 1 error, 0 warnings
Is there any configuration missing?
Update
I found the components.config file inside
C:\inetpub\wwwroot\XXXX\Website\sitecore modules\Shell\uCommerce\Configuration
and I added the file inside the web project root directory and tried to precompile web project, now I’m getting different error error
ASPRUNTIME: Type is not resolved for member 'Castle.Windsor.Configuration.Interpreters.ConfigurationProcessingException,Castle.Windsor, Version=3.2.0.0, Culture=neutral, PublicKeyToken=407dd0808d44fbdc'.
any solution for it?
The components.config is a file uCommerce need.
The configuration file should be placed somewhere below the uCommerce folder. (not sure where depend on the version) It will automatically be picked up when the application starts up.
Related
I installed and registered Sencha Architect 4.3.2.19. However, after I created a new classic ExtJs 7.6.0 project, it doesn't initialize Cmd properly, and in the command output I see:
Exception in thread "Thread-15"
com.sencha.exceptions.BasicException: com.sencha.exceptions.ExState: Directory C:\Users\costa\Documents\Architect\frameworks/ext76/7.6.0.41/commercial does not contain a valid framework.
at com.sencha.tools.server.service.tasks.DispatchTask.execute(DispatchTask.java:55)
at com.sencha.tools.server.service.tasks.BaseServiceTask$1.run(BaseServiceTask.java:42)
at com.sencha.util.ThreadUtil$1.run(ThreadUtil.java:65)
at com.sencha.util.ThreadUtil$2.run(ThreadUtil.java:162)
at java.base/java.lang.Thread.run(Thread.java:1589)
Caused by: com.sencha.exceptions.ExState: Directory C:\Users\costa\Documents\Architect\frameworks/ext76/7.6.0.41/commercial does not contain a valid framework.
at com.sencha.command.app.AppCommands$InitCommand.validateEnvironment(AppCommands.java:1874)
at com.sencha.command.app.AppCommands$InitCommand.execute(AppCommands.java:1750)
at java.base/jdk.internal.reflect.DirectMethodHandleAccessor.invoke(DirectMethodHandleAccessor.java:104)
at java.base/java.lang.reflect.Method.invoke(Method.java:578)
at com.sencha.util.MethodInvoker$Arguments.invoke(MethodInvoker.java:175)
at com.sencha.cli.Command.dispatch(Command.java:43)
at com.sencha.command.BasePluginCommands$BasePluginCommand.dispatch(BasePluginCommands.java:289)
at com.sencha.cli.Commands.dispatch(Commands.java:64)
at com.sencha.cli.Commands.dispatch(Commands.java:64)
at com.sencha.command.Sencha.dispatch(Sencha.java:80)
at com.sencha.cli.AbstractCommand.dispatch(AbstractCommand.java:124)
at com.sencha.tools.server.service.tasks.DispatchTask.execute(DispatchTask.java:52)
... 4 more
The Cmd base directory is set to: C:\Users\costa\bin\Sencha\Cmd which contains the subdirectory 7.6.0.87.
Any idea on how to fix the exception? Time to open a ticket?
Edit: I've got the previous error on Windows 2016. I just gave SA 4.3.2.19 for macosx a try. It has a different problem. I created a blank ExtJs 7.6.0 Modern project. When I save the project in the folder I get (I set the app name to App) :
/Users/costa/bin/Sencha/Cmd/7.6.0.87/extensions/sencha-service/shell-wrapper.sh: line 41: cordova: command not found
/Users/costa/bin/Sencha/Cmd/7.6.0.87/extensions/sencha-service/shell-wrapper.sh: line 41: phonegap: command not found
[INF] Initializing empty workspace at /Users/costa/Documents/development/javascript/TestAppModern01
[INF] Copying framework to /Users/costa/Documents/development/javascript/TestAppModern01/ext
[INF] Added framework ext to workspace.json
[ERR] The specified string cannot be converted into a valid namespace identifier
Exception in thread "Thread-61" com.sencha.exceptions.BasicException: com.sencha.exceptions.ExState: Invalid namespace : App
at com.sencha.tools.server.service.tasks.DispatchTask.execute(DispatchTask.java:55)
at com.sencha.tools.server.service.tasks.BaseServiceTask$1.run(BaseServiceTask.java:42)
at com.sencha.util.ThreadUtil$1.run(ThreadUtil.java:65)
at com.sencha.util.ThreadUtil$2.run(ThreadUtil.java:162)
at java.base/java.lang.Thread.run(Thread.java:833)
Caused by: com.sencha.exceptions.ExState: Invalid namespace : App
at com.sencha.util.NameUtil.stringToNamespace(NameUtil.java:76)
at com.sencha.command.generator.GeneratorCommands$AppCommand.validateAppName(GeneratorCommands.java:680)
at com.sencha.command.generator.GeneratorCommands$AppCommand.execute(GeneratorCommands.java:420)
at com.sencha.command.app.AppCommands$InitCommand.execute(AppCommands.java:1819)
at java.base/jdk.internal.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at java.base/jdk.internal.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:77)
at java.base/jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.base/java.lang.reflect.Method.invoke(Method.java:568)
at com.sencha.util.MethodInvoker$Arguments.invoke(MethodInvoker.java:175)
at com.sencha.cli.Command.dispatch(Command.java:43)
at com.sencha.command.BasePluginCommands$BasePluginCommand.dispatch(BasePluginCommands.java:289)
at com.sencha.cli.Commands.dispatch(Commands.java:64)
at com.sencha.cli.Commands.dispatch(Commands.java:64)
at com.sencha.command.Sencha.dispatch(Sencha.java:80)
at com.sencha.cli.AbstractCommand.dispatch(AbstractCommand.java:124)
at com.sencha.tools.server.service.tasks.DispatchTask.execute(DispatchTask.java:52)
... 4 more
An identical error occurs when I save a classic project.
What am I missing? There seems to be something wrong overall with SA 4.3.2, or maybe it's missing something.
Both versions, windows & macosx, don't allow me to set Build Tools to Enabled. I click Save, I come back to the dialog and Build Tools is set to Disabled.
More than that, I downloaded ExtJs 7.6.0 and unzipped in a local folder, then in the above dialog I chose Complete or Custom Path, I entered the folder where I unzipped ExtJs, clicked Save, came back to the dialog and Build Tools is Disabled again.
Thank you
ok, I found a workaround for the first problem I had on windows. I installed Sencha Cmd from the installer - I don't know if that made a difference or not.
After creating the classic app, and saving it in SA, I went to the command line and I ran inside the project folder: C:\Users\costa\bin\Sencha\Cmd\7.6.0.87\sencha.exe app init -n App -e ..\..\ext760 --classic
You'd have to adjust the parameters according to your needs. I re-opened the project in SA, and it got its brains back. In my case I used a workspace, and the folder for the workspace was 2 levels up from the project folder. I placed the 7.6.0 ExtJs files in the ext760 directory.
Update: I created a ticket with Sencha and they came back with the fix.
The framework code has been incorrectly installed by SA 4.3.2 in this folder: C:\Users\<UserName>\Documents\Architect\frameworks\ext76\7.6.0.41\commercial\ext-7.6.0. The solution is to copy the files in this folder one level up, i.e. in C:\Users\<UserName>\Documents\Architect\frameworks\ext76\7.6.0.41\commercial, and then it's going to work.
We've installed Sybase 16 Express in our Linux box, it was able to startup right after the installation. When we recently try restarting it with the startserver -f RUN_FILE command, it failed to find the libsapcrypto.so file.
~/sap/ASE-16_0/bin> ../sap/ASE-16_0/bin/dataserver: error while loading shared libraries: libsapcrypto.so: cannot open shared object file: No such file or directory
We searched this file, multiple matches presented in the following paths:
./DM/OCS-16_0/lib3p/libsapcrypto.so
./DM/OCS-16_0/lib3p64/libsapcrypto.so
./DM/OCS-16_0/devlib3p64/libsapcrypto.so
./DM/OCS-16_0/devlib3p/libsapcrypto.so
./DM/REP-16_0/lib64/libsapcrypto.so
./DataAccess/ODBC/lib/libsapcrypto.so
./DataAccess64/ODBC/lib/libsapcrypto.so
./OCS-16_0/lib3p/libsapcrypto.so
./OCS-16_0/lib3p64/libsapcrypto.so
./OCS-16_0/devlib3p64/libsapcrypto.so
./OCS-16_0/devlib3p/libsapcrypto.so
Since this hasn't been answered yet, running this command worked for me:
. /opt/sap/SYBASE.sh
Note the different syntax to make sure the environment variables are set in the terminal session, as opposed to using this syntax:
/opt/sap/SYBASE.sh
So I have a .NET Core 2.2 web application.
I added the EPPlus library to it and now, when it is released to Azure (App Service) it won't start and I get the error:
HTTP Error 502.5 - ANCM Out-Of-Process Startup Failure
I narrowed this down by running a console in Azure and the command: "dotnet my.project.dll" - and got the actual error:
An assembly specified in the application dependencies manifest
(my.project.deps.json) was not found:
package: 'Microsoft.Win32.SystemEvents', version: '4.5.0'
path: 'runtimes/win/lib/netcoreapp2.0/Microsoft.Win32.SystemEvents.dll'
The Microsoft.Win32.SystemEvents.dll is present in the main wwwroot folder the application is deployed to.
But the whole runtimes/win/libs/ folder I don't think exists at all.
The my.project.deps.json files has the section which looks like this:
"Microsoft.Win32.SystemEvents/4.5.0": {
"dependencies": {
"Microsoft.NETCore.Platforms": "2.2.0"
},
"runtime": {
"lib/netstandard2.0/Microsoft.Win32.SystemEvents.dll": {
"assemblyVersion": "4.0.0.0",
"fileVersion": "4.6.26515.6"
}
},
"runtimeTargets": {
"runtimes/win/lib/netcoreapp2.0/Microsoft.Win32.SystemEvents.dll": {
"rid": "win",
"assetType": "runtime",
"assemblyVersion": "4.0.0.0",
"fileVersion": "4.6.26515.6"
}
}
}
If I delete the whole "runtimeTargets" section, then the application works! (Well, I have to do the same for a few more dll's too: System.Drawing.Common and System.Security.Cryptography.Pkcs)
But the file gets regenerated fully whenever it is published and released - so it is not a viable solution.
I also don't know what that section of the file does. It might be important to leave it in. Though it all works so it can't be that vital...
It is built and published through TeamCity - I'm not an expert on the process but I think the command being run amounts to this:
dotnet publish my.proj.csproj --configuration RELEASE --no-restore --no-build
Other things tried: < PublishWithAspNetCoreTargetManifest>false< / PublishWithAspNetCoreTargetManifest>
had no effect
Anyone have any ideas?
As it turns out, it was my fault :(
Team City was created a NuGet package from the published output. But the /runtimes folder was not included in the package so was never released as part of the site.
I edited the nuspec file to include it /runtimes and all works OK.
I've had same issue. After the build I copied all files to the "production" directory by DOS command copy so then the files from "runtimes" subfolder were missing. Copying all files including all subdirectories (by using xcopy) fixed the issue.
I am trying to run locally Orchard.Azure.CloudService project without any code changes to the official stable release 1.7.1 (58c21815). full source address is # https://git01.codeplex.com/orchard .
Here is the steps to reproduce the error:
launch the Orchard.Azure solution
select "Debug" build
click on press F5 start debugging
the page will show "Server Error in '/' Application."
None of the constructors found with 'Autofac.Core.Activators.Reflection.DefaultConstructorFinder' on type 'Orchard.Environment.DefaultOrchardShell' can be invoked with the available services and parameters: Cannot resolve parameter 'Orchard.Mvc.Routes.IRoutePublisher routePublisher' of constructor 'Void .ctor(System.Func1[Autofac.Features.OwnedInstances.Owned1[Orchard.Environment.IOrchardShellEvents]], System.Collections.Generic.IEnumerable1[Orchard.Mvc.Routes.IRouteProvider], System.Collections.Generic.IEnumerable1[Orchard.WebApi.Routes.IHttpRouteProvider], Orchard.Mvc.Routes.IRoutePublisher, System.Collections.Generic.IEnumerable`1[Orchard.Mvc.ModelBinders.IModelBinderProvider], Orchard.Mvc.ModelBinders.IModelBinderPublisher, Orchard.Tasks.ISweepGenerator)'.
Source Error:
Line 111: var shellScope = _shellContainerFactory.CreateContainer(settings, blueprint);
Line 112:
Line 113: return new ShellContext {
Line 114: Settings = settings,
Line 115: Descriptor = descriptor,
Source File: c:\projects\orchard\src\Orchard\Environment\ShellBuilders\ShellContextFactory.cs Line: 113
`
... "
Windows 8, x64
VS2012.3 Azure SDK 2.1
source code version hash: 58c21815
It is a known issue that the solution can't run in the emulator. This is caused by the structure of the solution, and the fact the emulator doesn't run the cspack file. This script is used to copy modules and themes into the package for Azure deployment. When the emulator runs it simply mounts the Orchard.Azure.Web project which is almost empty and doesn't have all the files necessary to run the solution.
See this discussion on CodePlex for more detail.
I don't believe you should be running that solution but the main Orchard solution.
ie, you don't need to develop specifically for Azure, just deploy for Azure.
I think ^_^
I am trying to configure Cruisecontrol.net for UCM Clearcase for the first time. Following is the sourceControl tag in the ccnet.config file:
<sourcecontrol type="clearCase">
<branch>123_India_Release</branch>
<autoGetSource>true</autoGetSource>
<viewName>admin_123_CRUISE</viewName>
<viewPath>$(ViewDirectory)</viewPath>
<useLabel>false</useLabel>
<useBaseline>false</useBaseline>
<executable>cleartool.exe</executable>
</sourcecontrol>
I constantly receive the following error:
ThoughtWorks.CruiseControl.Core.CruiseControlException: Source control
operation failed: cleartool: Error: Not an object in a vob: "PATH TO
THE VIEW"
When I run cleartool from an arbitrary directory with the following parameters:
cleartool.exe lshist -r -nco -branch "123_India_Release" -since
05-Dec-2012.14:38:18 -fmt
I get the same error. But if I change the working directory to $(ViewDirectory) before running cleartool, it runs fine.
How should I make Cruisecontrol.net run cleartool.exe from the $(ViewDirectory)?
I have already tried adding <workingDirectory>$(ViewDirectory)</workingDirectory> tag before <executable>cleartool.exe</executable> but it did not work.
Any help would be appreciated.
EDIT 1:
As a workaround I have done the following:
<exec>
<executable>cleartool.exe</executable>
<baseDirectory>d:\Workspace\123_India_Release\VOB</baseDirectory>
<buildArgs>update -force</buildArgs>
<buildTimeoutSeconds>6000</buildTimeoutSeconds>
</exec>
I have added this to the tasks tag. I have configured an hourly trigger which does the following:
1) Update snapshot view
2) Build the VS 2010 solutions mentioned in the tasks tag.
The limitations are:
1) The trigger is hourly. I want it to be a commit based trigger.
2) This is a workaround
EDIT 2:
Further experimentation revealed that the ccnet.exe works fine. It does all that is needed. The issue is caused by the service ccservice.
I have stopped ccservice for now and started ccnet.exe. I plan to leave it running.
The View directory isn't enough: you must specify a vob.
See for instance:
"clearfsimport: Error: Not an object in a vob: "\"." (as an illustratio of that error message)
this thread (or this one): "You have to specify explicitly the VOB(s) to check for modification set"
The path should looks like:
<viewPath>Drive:\path\to\view\vobname</viewPath>
If your $(ViewDirectory) already references Drive:\path\to\view, then you could use:
<viewPath>$(ViewDirectory)\vobname</viewPath>