I have a doubt. When i declare a value and assign to some variable, I don't know how to reassign the same value to another variable. See the code snippet below.
#/bin/sh
#declare ARG1 to a
a=ARG1
#declaring $a to ARG2
ARG2=$`$a`
echo "ARG 2 = $ARG2"
It should display my output as
ARG 2 = ARG1
...but instead the actual output is:
line 5: ARG1: command not found
ARG 2 = $
To assign the value associated with the variable dest to the variable source, you need simply run dest=$source.
For example, to assign the value associated with the variable arg2 to the variable a:
a=ARG1
arg2=$a
echo "ARG 2 = $arg2"
The use of lower-case variable names for local shell variables is by convention, not necessity -- but this has the advantage of avoiding conflicts with environment variables and builtins, both of which use all-uppercase names by convention.
You may also want to alias rather than copy the variable. For example, if you need mutation. Or if you want to run a function multiple times on different variables. Here's how it works
Example:
C=cat
declare -n VAR=C
VAR+=" says Hi"
echo "$C" # prints "cat says Hi"
Example with arrays/dictionaries:
A=(a a a)
declare -n VAR=A # "-n" stands for "name", e.g. a new name for the same variable
VAR+=(b)
echo "${A[#]}" # prints "a a a b"
That is, VAR becomes effectively the same as the original variable. Instead of copying, you're adding an alias. Here's an example with functions:
function myFunc() {
local -n VAR="$1"
VAR="Hello from $2"
echo "I've set variable '$1' to value '$VAR'"
}
myFunc Inbox Bob # I've set variable 'Inbox' to value 'Hello from Bob'
myFunc Luke Leia # I've set variable 'Luke' to value 'Hello from Leia'
echo "$Luke" # Hello from Leia
Whether you should use these approaches is a question. Generally, immutable code is easier to read and to reason about (in almost any programming language). However, sometimes you really need to get stuff done in a certain way. Hope this answer helps you then.
The following bash script's goal is to read CSV file ( all_words.CSV ) and print parameters and values but I have very strange problem.
When I run the script all words parameters (word1-word8) was printed - until now every thing is fine!When I want to print as word1=$word1 outside of function then from some reason word1 not get the value?
Why all parameters (word1-word8) print the values in function, and when I want to print word1 outside the function then word1 is without value?
I tried with export command but it doesn’t help as; export word1=$word1
Please advice how it can be? What the problem here?
#!/bin/bash
read_csv ()
{
CSV_LINE=2
vars=()
c=1
while IFS=, read -ra arr; do
if ((c==1)); then
vars+=("${arr[#]}")
elif ((c==CSV_LINE)); then
for ((i=0; i<${#arr[#]}; i++)); do
declare ${vars[$i]}="${arr[$i]}"
done
fi
((c++))
done < all_words.CSV
echo CSV_LINE=$CSV_LINE
echo word1=$word1
echo word2=$word2
echo word3=$word3
echo word4=$word4
echo word5=$word5
echo word6=$word6
echo word7=$word7
echo word8=$word8
}
read_csv
echo word1=$word1
.
more all_words.CSV
word1,word2,word3,word4,word5,word6,word7,word8
&^#G TR /erfernfjer *&^NHY " "" ? / $#H,#Y^%" E "R$%*&*UJ,**U&^#%%#$^&// \\,^T%!#&^YG.+___KI*&HHTY,%%#$#!%^#&,P/\06E87*UHG11#
,edehu234##!&,~hum&T%6e4
example of script output:
./readWords_from_csv.bash
CSV_LINE=2
word1=&^#G TR / erfernfjer *&^NHY " "" ? / $#H
word2=#Y^%" E "R$%*&*UJ
word3=**U&^#%%#$^&//\\
word4=^T%!#&^YG.+___KI*&HHTY
word5=%%#$#!%^#&
word6=P/\06E87*UHG11#
word7=edehu234##!&
word8=~hum&T%6e4
word1=
man bash explains under declare:
When used in a function, declare makes NAMEs local, as with the local command.
declare -g ${vars[$i]}="${arr[$i]}"
# ^^
Use declare -g to declare a variable at global level in a function. From man bash:
declare [-aAfFgilrtux] [-p] [name[=value] ...]
[...] The -g option forces
variables to be created or modified at the global scope, even
when declare is executed in a shell function. It is ignored in
all other cases. [...]
Here is a simple demonstration of the -g flag (works as expected on GNU bash, version 4.2.37):
#!/bin/bash
function f() {
declare -g V
V="hello"
}
f
echo $V
Please advice ...
Better use printf:
printf -v "${vars[$i]}" "%s" "${arr[$i]}"
Although I'd suggest using an associative array instead. It's the more appropriate solution:
#!/bin/bash
declare -A CSV_VALUES
declare -a CSV_KEYS
function read_csv {
CSV_VALUES=() CSV_KEYS=()
local VALUES I
{
IFS=, read -ra CSV_KEYS
IFS=, read -ra VALUES
} < all_words.csv
for I in "${!CSV_KEYS[#]}"; do
CSV_VALUES[${CSV_KEYS[I]}]=${VALUES[I]}
done
}
read_csv ## Perhaps pass the filename to read_csv as an argument instead?
# We can do for KEY in "${!CVS_VALUES[#]}" but the order is uncertain.
for KEY in "${CSV_KEYS[#]}"; do
echo "CSV_VALUES[$KEY]=${CSV_VALUES[$KEY]}"
done
In Linux, say I have the following file (e.g. conf.properties):
HOST_URL=http://$HOSTNAME
STD_CONFIG=http://$HOSTNAME/config
USER_CONFIG=http://$HOSTNAME/config/$unconfigured
I want to create another file with all the environment variables replaced...e.g. say the environment variable $HOSTNAME is 'myhost' and $unconfigured is not set, a script should produce the following output:
HOST_URL=http://myhost
STD_CONFIG=http://myhost/config
USER_CONFIG=http://myhost/config/
I was thinking this could be done in a simple one-liner with some sort of sed/awk magic, but I'm no expert and my searches have been in vein, so appreciate any help.
Edit:
I should mention that the file can really be any format text file, for example xml. I just want to replace anything that looks like an env variable with whatever is currently set in the environment.
This is what envsubst is for.
echo 'Hello $USER'
Hello $USER
echo 'Hello $USER' | envsubst
Hello malvineous
You would probably use it more like this though:
envsubst < input.txt > output.txt
envsubst seems to be part of GNU gettext.
sed 's/$HOSTNAME/myhost/g;s/$unconfigured//g' yourfile.txt > another_file.txt
update:
Based on updates in your question, this won't be a good solution.
update2 :
This is based on an answer to a related question. I've hacked at it (I'm unfamiliar with perl) to remove undefined vars.
perl -p -e 's/\$\{([^}]+)\}/defined $ENV{$1} ? $ENV{$1} : $&/eg; s/\$\{([^}]+)\}//eg' yourfile.txt
Should work for any input text file, however you will need to define vars using the ${...} format which simplifies the string matching.
(rant regarding the evilness of eval moved to a separate post so as not to confuse readers)
"eval is evil"
This is not an answer, but a warning in response to using eval for this task. You really really really don't want to do that.
Exhibit 1: a malicious template file:
HOST_URL=http://$HOSTNAME
STD_CONFIG=http://$HOSTNAME/config
USER_CONFIG=http://$HOSTNAME/config/$unconfigured
&& cat /etc/redhat-release
An unsuspecting user:
[lsc#aphek]$ cat somefile | while read line; do echo $(eval echo `echo $line`); done
HOST_URL=http://xyz
STD_CONFIG=http://xyz/config
USER_CONFIG=http://xyz/config/
Red Hat Enterprise Linux WS release 4 (Nahant Update 9)
Note the last line!
Now, imagine the possibilities....
I'd do it like this:
# Set the $HOSTNAME and other variables
# Now evaluate the properties file as a shell script.
. config.properties
# Write the values
cat >somefile <<EOF
HOST_URL=$HOST_URL
STD_CONFIG=$STD_CONFIG
USER_CONFIG=$USER_CONFIG
EOF
Edit: Or this very nasty thing (I'm sure there's a better way)
for name in HOST_URL STD_CONFIG USER_CONFIG
echo "$name=$(eval echo `echo '$'$name`)" >>somefile
end
Thanks to #DarkDust I came up with this:
cat somefile | while read line; do echo $(eval echo `echo $line`); done > somefile.replaced
I used this oneliner to replace ${VARIABLE} style variables in a file:
TARGET_FILE=/etc/apache2/apache2.conf; for VARNAME in $(grep -P -o -e '\$\{\S+\}' ${TARGET_FILE} | sed -e 's|^\${||g' -e 's|}$||g' | sort -u); do sed -i "s|\${$(echo $VARNAME)}|${!VARNAME}|g" ${TARGET_FILE}; done
I'm pretty sure someone can do this in 1/3rd of the length using awk… feel challenged! ;)
Here is a snippet of Javascript that I like to have around for solving this exact problem:
// A Javascript version of envsubst for our builds
// Purpose: replace all ocurrences of ${VAR} with the equivalent var from the environment from stdin
var readline = require('readline');
var rl = readline.createInterface({
input: process.stdin,
output: process.stdout,
terminal: false
});
const environment = process.env;
rl.on('line', function(line) {
const newLine = line.replace(/\$\{([a-zA-Z0-9_]+)\}/g, function(_match, variable) {
const envVar = environment[variable];
return envVar ? envVar : '';
});
process.stdout.write(`${newLine}\n`);
});
Hopefully this helps somebody else.
Here's a short one-liner that uses python's curly brace formatting to safely do the magic:
contents=\"\"\"`cat $file`\"\"\"; python -c "import os;print $contents.format(**os.environ)"
avoids evil eval
allows outputting curly braces: use {{ instead of {
no need to specify vars explicitly when calling the script
For example, given properties file settings.properties:
# my properties file
someVar = {MY_ENV_VAR}
curlyBraceVar = has {{curly braces}}
Then, do the substitution with:
$ export MY_ENV_VAR="hello"
$ file=settings.properties
$ contents=\"\"\"`cat $file`\"\"\"; python -c "import os;print $contents.format(**os.environ)"
# my properties file
someVar = hello
curlyBraceVar = has {curly braces}
A script is here: https://raw.githubusercontent.com/aneilbaboo/machome/master/bin/substenv
if you have installed nodejs you can run
npx #utft/tt -e FOO=bar /path/to/input /path/to/output
or you can run it programmatically
https://github.com/utftufutukgyftryidytftuv/tt
I'd like to return a string from a Bash function.
I'll write the example in java to show what I'd like to do:
public String getSomeString() {
return "tadaa";
}
String variable = getSomeString();
The example below works in bash, but is there a better way to do this?
function getSomeString {
echo "tadaa"
}
VARIABLE=$(getSomeString)
There is no better way I know of. Bash knows only status codes (integers) and strings written to the stdout.
You could have the function take a variable as the first arg and modify the variable with the string you want to return.
#!/bin/bash
set -x
function pass_back_a_string() {
eval "$1='foo bar rab oof'"
}
return_var=''
pass_back_a_string return_var
echo $return_var
Prints "foo bar rab oof".
Edit: added quoting in the appropriate place to allow whitespace in string to address #Luca Borrione's comment.
Edit: As a demonstration, see the following program. This is a general-purpose solution: it even allows you to receive a string into a local variable.
#!/bin/bash
set -x
function pass_back_a_string() {
eval "$1='foo bar rab oof'"
}
return_var=''
pass_back_a_string return_var
echo $return_var
function call_a_string_func() {
local lvar=''
pass_back_a_string lvar
echo "lvar='$lvar' locally"
}
call_a_string_func
echo "lvar='$lvar' globally"
This prints:
+ return_var=
+ pass_back_a_string return_var
+ eval 'return_var='\''foo bar rab oof'\'''
++ return_var='foo bar rab oof'
+ echo foo bar rab oof
foo bar rab oof
+ call_a_string_func
+ local lvar=
+ pass_back_a_string lvar
+ eval 'lvar='\''foo bar rab oof'\'''
++ lvar='foo bar rab oof'
+ echo 'lvar='\''foo bar rab oof'\'' locally'
lvar='foo bar rab oof' locally
+ echo 'lvar='\'''\'' globally'
lvar='' globally
Edit: demonstrating that the original variable's value is available in the function, as was incorrectly criticized by #Xichen Li in a comment.
#!/bin/bash
set -x
function pass_back_a_string() {
eval "echo in pass_back_a_string, original $1 is \$$1"
eval "$1='foo bar rab oof'"
}
return_var='original return_var'
pass_back_a_string return_var
echo $return_var
function call_a_string_func() {
local lvar='original lvar'
pass_back_a_string lvar
echo "lvar='$lvar' locally"
}
call_a_string_func
echo "lvar='$lvar' globally"
This gives output:
+ return_var='original return_var'
+ pass_back_a_string return_var
+ eval 'echo in pass_back_a_string, original return_var is $return_var'
++ echo in pass_back_a_string, original return_var is original return_var
in pass_back_a_string, original return_var is original return_var
+ eval 'return_var='\''foo bar rab oof'\'''
++ return_var='foo bar rab oof'
+ echo foo bar rab oof
foo bar rab oof
+ call_a_string_func
+ local 'lvar=original lvar'
+ pass_back_a_string lvar
+ eval 'echo in pass_back_a_string, original lvar is $lvar'
++ echo in pass_back_a_string, original lvar is original lvar
in pass_back_a_string, original lvar is original lvar
+ eval 'lvar='\''foo bar rab oof'\'''
++ lvar='foo bar rab oof'
+ echo 'lvar='\''foo bar rab oof'\'' locally'
lvar='foo bar rab oof' locally
+ echo 'lvar='\'''\'' globally'
lvar='' globally
All answers above ignore what has been stated in the man page of bash.
All variables declared inside a function will be shared with the calling environment.
All variables declared local will not be shared.
Example code
#!/bin/bash
f()
{
echo function starts
local WillNotExists="It still does!"
DoesNotExists="It still does!"
echo function ends
}
echo $DoesNotExists #Should print empty line
echo $WillNotExists #Should print empty line
f #Call the function
echo $DoesNotExists #Should print It still does!
echo $WillNotExists #Should print empty line
And output
$ sh -x ./x.sh
+ echo
+ echo
+ f
+ echo function starts
function starts
+ local 'WillNotExists=It still does!'
+ DoesNotExists='It still does!'
+ echo function ends
function ends
+ echo It still 'does!'
It still does!
+ echo
Also under pdksh and ksh this script does the same!
Bash, since version 4.3, feb 2014(?), has explicit support for reference variables or name references (namerefs), beyond "eval", with the same beneficial performance and indirection effect, and which may be clearer in your scripts and also harder to "forget to 'eval' and have to fix this error":
declare [-aAfFgilnrtux] [-p] [name[=value] ...]
typeset [-aAfFgilnrtux] [-p] [name[=value] ...]
Declare variables and/or give them attributes
...
-n Give each name the nameref attribute, making it a name reference
to another variable. That other variable is defined by the value
of name. All references and assignments to name, except for⋅
changing the -n attribute itself, are performed on the variable
referenced by name's value. The -n attribute cannot be applied to
array variables.
...
When used in a function, declare and typeset make each name local,
as with the local command, unless the -g option is supplied...
and also:
PARAMETERS
A variable can be assigned the nameref attribute using the -n option to the
declare or local builtin commands (see the descriptions of declare and local
below) to create a nameref, or a reference to another variable. This allows
variables to be manipulated indirectly. Whenever the nameref variable is⋅
referenced or assigned to, the operation is actually performed on the variable
specified by the nameref variable's value. A nameref is commonly used within
shell functions to refer to a variable whose name is passed as an argument to⋅
the function. For instance, if a variable name is passed to a shell function
as its first argument, running
declare -n ref=$1
inside the function creates a nameref variable ref whose value is the variable
name passed as the first argument. References and assignments to ref are
treated as references and assignments to the variable whose name was passed as⋅
$1. If the control variable in a for loop has the nameref attribute, the list
of words can be a list of shell variables, and a name reference will be⋅
established for each word in the list, in turn, when the loop is executed.
Array variables cannot be given the -n attribute. However, nameref variables
can reference array variables and subscripted array variables. Namerefs can be⋅
unset using the -n option to the unset builtin. Otherwise, if unset is executed
with the name of a nameref variable as an argument, the variable referenced by⋅
the nameref variable will be unset.
For example (EDIT 2: (thank you Ron) namespaced (prefixed) the function-internal variable name, to minimize external variable clashes, which should finally answer properly, the issue raised in the comments by Karsten):
# $1 : string; your variable to contain the return value
function return_a_string () {
declare -n ret=$1
local MYLIB_return_a_string_message="The date is "
MYLIB_return_a_string_message+=$(date)
ret=$MYLIB_return_a_string_message
}
and testing this example:
$ return_a_string result; echo $result
The date is 20160817
Note that the bash "declare" builtin, when used in a function, makes the declared variable "local" by default, and "-n" can also be used with "local".
I prefer to distinguish "important declare" variables from "boring local" variables, so using "declare" and "local" in this way acts as documentation.
EDIT 1 - (Response to comment below by Karsten) - I cannot add comments below any more, but Karsten's comment got me thinking, so I did the following test which WORKS FINE, AFAICT - Karsten if you read this, please provide an exact set of test steps from the command line, showing the problem you assume exists, because these following steps work just fine:
$ return_a_string ret; echo $ret
The date is 20170104
(I ran this just now, after pasting the above function into a bash term - as you can see, the result works just fine.)
Like bstpierre above, I use and recommend the use of explicitly naming output variables:
function some_func() # OUTVAR ARG1
{
local _outvar=$1
local _result # Use some naming convention to avoid OUTVARs to clash
... some processing ....
eval $_outvar=\$_result # Instead of just =$_result
}
Note the use of quoting the $. This will avoid interpreting content in $result as shell special characters. I have found that this is an order of magnitude faster than the result=$(some_func "arg1") idiom of capturing an echo. The speed difference seems even more notable using bash on MSYS where stdout capturing from function calls is almost catastrophic.
It's ok to send in a local variables since locals are dynamically scoped in bash:
function another_func() # ARG
{
local result
some_func result "$1"
echo result is $result
}
You could also capture the function output:
#!/bin/bash
function getSomeString() {
echo "tadaa!"
}
return_var=$(getSomeString)
echo $return_var
# Alternative syntax:
return_var=`getSomeString`
echo $return_var
Looks weird, but is better than using global variables IMHO. Passing parameters works as usual, just put them inside the braces or backticks.
The most straightforward and robust solution is to use command substitution, as other people wrote:
assign()
{
local x
x="Test"
echo "$x"
}
x=$(assign) # This assigns string "Test" to x
The downside is performance as this requires a separate process.
The other technique suggested in this topic, namely passing the name of a variable to assign to as an argument, has side effects, and I wouldn't recommend it in its basic form. The problem is that you will probably need some variables in the function to calculate the return value, and it may happen that the name of the variable intended to store the return value will interfere with one of them:
assign()
{
local x
x="Test"
eval "$1=\$x"
}
assign y # This assigns string "Test" to y, as expected
assign x # This will NOT assign anything to x in this scope
# because the name "x" is declared as local inside the function
You might, of course, not declare internal variables of the function as local, but you really should always do it as otherwise you may, on the other hand, accidentally overwrite an unrelated variable from the parent scope if there is one with the same name.
One possible workaround is an explicit declaration of the passed variable as global:
assign()
{
local x
eval declare -g $1
x="Test"
eval "$1=\$x"
}
If name "x" is passed as an argument, the second row of the function body will overwrite the previous local declaration. But the names themselves might still interfere, so if you intend to use the value previously stored in the passed variable prior to write the return value there, be aware that you must copy it into another local variable at the very beginning; otherwise the result will be unpredictable!
Besides, this will only work in the most recent version of BASH, namely 4.2. More portable code might utilize explicit conditional constructs with the same effect:
assign()
{
if [[ $1 != x ]]; then
local x
fi
x="Test"
eval "$1=\$x"
}
Perhaps the most elegant solution is just to reserve one global name for function return values and
use it consistently in every function you write.
As previously mentioned, the "correct" way to return a string from a function is with command substitution. In the event that the function also needs to output to console (as #Mani mentions above), create a temporary fd in the beginning of the function and redirect to console. Close the temporary fd before returning your string.
#!/bin/bash
# file: func_return_test.sh
returnString() {
exec 3>&1 >/dev/tty
local s=$1
s=${s:="some default string"}
echo "writing directly to console"
exec 3>&-
echo "$s"
}
my_string=$(returnString "$*")
echo "my_string: [$my_string]"
executing script with no params produces...
# ./func_return_test.sh
writing directly to console
my_string: [some default string]
hope this helps people
-Andy
You could use a global variable:
declare globalvar='some string'
string ()
{
eval "$1='some other string'"
} # ---------- end of function string ----------
string globalvar
echo "'${globalvar}'"
This gives
'some other string'
To illustrate my comment on Andy's answer, with additional file descriptor manipulation to avoid use of /dev/tty:
#!/bin/bash
exec 3>&1
returnString() {
exec 4>&1 >&3
local s=$1
s=${s:="some default string"}
echo "writing to stdout"
echo "writing to stderr" >&2
exec >&4-
echo "$s"
}
my_string=$(returnString "$*")
echo "my_string: [$my_string]"
Still nasty, though.
The way you have it is the only way to do this without breaking scope. Bash doesn't have a concept of return types, just exit codes and file descriptors (stdin/out/err, etc)
Addressing Vicky Ronnen's head up, considering the following code:
function use_global
{
eval "$1='changed using a global var'"
}
function capture_output
{
echo "always changed"
}
function test_inside_a_func
{
local _myvar='local starting value'
echo "3. $_myvar"
use_global '_myvar'
echo "4. $_myvar"
_myvar=$( capture_output )
echo "5. $_myvar"
}
function only_difference
{
local _myvar='local starting value'
echo "7. $_myvar"
local use_global '_myvar'
echo "8. $_myvar"
local _myvar=$( capture_output )
echo "9. $_myvar"
}
declare myvar='global starting value'
echo "0. $myvar"
use_global 'myvar'
echo "1. $myvar"
myvar=$( capture_output )
echo "2. $myvar"
test_inside_a_func
echo "6. $_myvar" # this was local inside the above function
only_difference
will give
0. global starting value
1. changed using a global var
2. always changed
3. local starting value
4. changed using a global var
5. always changed
6.
7. local starting value
8. local starting value
9. always changed
Maybe the normal scenario is to use the syntax used in the test_inside_a_func function, thus you can use both methods in the majority of cases, although capturing the output is the safer method always working in any situation, mimicking the returning value from a function that you can find in other languages, as Vicky Ronnen correctly pointed out.
The options have been all enumerated, I think. Choosing one may come down to a matter of the best style for your particular application, and in that vein, I want to offer one particular style I've found useful. In bash, variables and functions are not in the same namespace. So, treating the variable of the same name as the value of the function is a convention that I find minimizes name clashes and enhances readability, if I apply it rigorously. An example from real life:
UnGetChar=
function GetChar() {
# assume failure
GetChar=
# if someone previously "ungot" a char
if ! [ -z "$UnGetChar" ]; then
GetChar="$UnGetChar"
UnGetChar=
return 0 # success
# else, if not at EOF
elif IFS= read -N1 GetChar ; then
return 0 # success
else
return 1 # EOF
fi
}
function UnGetChar(){
UnGetChar="$1"
}
And, an example of using such functions:
function GetToken() {
# assume failure
GetToken=
# if at end of file
if ! GetChar; then
return 1 # EOF
# if start of comment
elif [[ "$GetChar" == "#" ]]; then
while [[ "$GetChar" != $'\n' ]]; do
GetToken+="$GetChar"
GetChar
done
UnGetChar "$GetChar"
# if start of quoted string
elif [ "$GetChar" == '"' ]; then
# ... et cetera
As you can see, the return status is there for you to use when you need it, or ignore if you don't. The "returned" variable can likewise be used or ignored, but of course only after the function is invoked.
Of course, this is only a convention. You are free to fail to set the associated value before returning (hence my convention of always nulling it at the start of the function) or to trample its value by calling the function again (possibly indirectly). Still, it's a convention I find very useful if I find myself making heavy use of bash functions.
As opposed to the sentiment that this is a sign one should e.g. "move to perl", my philosophy is that conventions are always important for managing the complexity of any language whatsoever.
In my programs, by convention, this is what the pre-existing $REPLY variable is for, which read uses for that exact purpose.
function getSomeString {
REPLY="tadaa"
}
getSomeString
echo $REPLY
This echoes
tadaa
But to avoid conflicts, any other global variable will do.
declare result
function getSomeString {
result="tadaa"
}
getSomeString
echo $result
If that isn’t enough, I recommend Markarian451’s solution.
They key problem of any 'named output variable' scheme where the caller can pass in the variable name (whether using eval or declare -n) is inadvertent aliasing, i.e. name clashes: From an encapsulation point of view, it's awful to not be able to add or rename a local variable in a function without checking ALL the function's callers first to make sure they're not wanting to pass that same name as the output parameter. (Or in the other direction, I don't want to have to read the source of the function I'm calling just to make sure the output parameter I intend to use is not a local in that function.)
The only way around that is to use a single dedicated output variable like REPLY (as suggested by Evi1M4chine) or a convention like the one suggested by Ron Burk.
However, it's possible to have functions use a fixed output variable internally, and then add some sugar over the top to hide this fact from the caller, as I've done with the call function in the following example. Consider this a proof of concept, but the key points are
The function always assigns the return value to REPLY, and can also return an exit code as usual
From the perspective of the caller, the return value can be assigned to any variable (local or global) including REPLY (see the wrapper example). The exit code of the function is passed through, so using them in e.g. an if or while or similar constructs works as expected.
Syntactically the function call is still a single simple statement.
The reason this works is because the call function itself has no locals and uses no variables other than REPLY, avoiding any potential for name clashes. At the point where the caller-defined output variable name is assigned, we're effectively in the caller's scope (technically in the identical scope of the call function), rather than in the scope of the function being called.
#!/bin/bash
function call() { # var=func [args ...]
REPLY=; "${1#*=}" "${#:2}"; eval "${1%%=*}=\$REPLY; return $?"
}
function greet() {
case "$1" in
us) REPLY="hello";;
nz) REPLY="kia ora";;
*) return 123;;
esac
}
function wrapper() {
call REPLY=greet "$#"
}
function main() {
local a b c d
call a=greet us
echo "a='$a' ($?)"
call b=greet nz
echo "b='$b' ($?)"
call c=greet de
echo "c='$c' ($?)"
call d=wrapper us
echo "d='$d' ($?)"
}
main
Output:
a='hello' (0)
b='kia ora' (0)
c='' (123)
d='hello' (0)
You can echo a string, but catch it by piping (|) the function to something else.
You can do it with expr, though ShellCheck reports this usage as deprecated.
bash pattern to return both scalar and array value objects:
definition
url_parse() { # parse 'url' into: 'url_host', 'url_port', ...
local "$#" # inject caller 'url' argument in local scope
local url_host="..." url_path="..." # calculate 'url_*' components
declare -p ${!url_*} # return only 'url_*' object fields to the caller
}
invocation
main() { # invoke url parser and inject 'url_*' results in local scope
eval "$(url_parse url=http://host/path)" # parse 'url'
echo "host=$url_host path=$url_path" # use 'url_*' components
}
Although there were a lot of good answers, they all did not work the way I wanted them to. So here is my solution with these key points:
Helping the forgetful programmer
Atleast I would struggle to always remember error checking after something like this: var=$(myFunction)
Allows assigning values with newline chars \n
Some solutions do not allow for that as some forgot about the single quotes around the value to assign. Right way: eval "${returnVariable}='${value}'" or even better: see the next point below.
Using printf instead of eval
Just try using something like this myFunction "date && var2" to some of the supposed solutions here. eval will execute whatever is given to it. I only want to assign values so I use printf -v "${returnVariable}" "%s" "${value}" instead.
Encapsulation and protection against variable name collision
If a different user or at least someone with less knowledge about the function (this is likely me in some months time) is using myFunction I do not want them to know that he must use a global return value name or some variable names are forbidden to use. That is why I added a name check at the top of myFunction:
if [[ "${1}" = "returnVariable" ]]; then
echo "Cannot give the ouput to \"returnVariable\" as a variable with the same name is used in myFunction()!"
echo "If that is still what you want to do please do that outside of myFunction()!"
return 1
fi
Note this could also be put into a function itself if you have to check a lot of variables.
If I still want to use the same name (here: returnVariable) I just create a buffer variable, give that to myFunction and then copy the value returnVariable.
So here it is:
myFunction():
myFunction() {
if [[ "${1}" = "returnVariable" ]]; then
echo "Cannot give the ouput to \"returnVariable\" as a variable with the same name is used in myFunction()!"
echo "If that is still what you want to do please do that outside of myFunction()!"
return 1
fi
if [[ "${1}" = "value" ]]; then
echo "Cannot give the ouput to \"value\" as a variable with the same name is used in myFunction()!"
echo "If that is still what you want to do please do that outside of myFunction()!"
return 1
fi
local returnVariable="${1}"
local value=$'===========\nHello World\n==========='
echo "setting the returnVariable now..."
printf -v "${returnVariable}" "%s" "${value}"
}
Test cases:
var1="I'm not greeting!"
myFunction var1
[[ $? -eq 0 ]] && echo "myFunction(): SUCCESS" || echo "myFunction(): FAILURE"
printf "var1:\n%s\n" "${var1}"
# Output:
# setting the returnVariable now...
# myFunction(): SUCCESS
# var1:
# ===========
# Hello World
# ===========
returnVariable="I'm not greeting!"
myFunction returnVariable
[[ $? -eq 0 ]] && echo "myFunction(): SUCCESS" || echo "myFunction(): FAILURE"
printf "returnVariable:\n%s\n" "${returnVariable}"
# Output
# Cannot give the ouput to "returnVariable" as a variable with the same name is used in myFunction()!
# If that is still what you want to do please do that outside of myFunction()!
# myFunction(): FAILURE
# returnVariable:
# I'm not greeting!
var2="I'm not greeting!"
myFunction "date && var2"
[[ $? -eq 0 ]] && echo "myFunction(): SUCCESS" || echo "myFunction(): FAILURE"
printf "var2:\n%s\n" "${var2}"
# Output
# setting the returnVariable now...
# ...myFunction: line ..: printf: `date && var2': not a valid identifier
# myFunction(): FAILURE
# var2:
# I'm not greeting!
myFunction var3
[[ $? -eq 0 ]] && echo "myFunction(): SUCCESS" || echo "myFunction(): FAILURE"
printf "var3:\n%s\n" "${var3}"
# Output
# setting the returnVariable now...
# myFunction(): SUCCESS
# var3:
# ===========
# Hello World
# ===========
#Implement a generic return stack for functions:
STACK=()
push() {
STACK+=( "${1}" )
}
pop() {
export $1="${STACK[${#STACK[#]}-1]}"
unset 'STACK[${#STACK[#]}-1]';
}
#Usage:
my_func() {
push "Hello world!"
push "Hello world2!"
}
my_func ; pop MESSAGE2 ; pop MESSAGE1
echo ${MESSAGE1} ${MESSAGE2}
agt#agtsoft:~/temp$ cat ./fc
#!/bin/sh
fcall='function fcall { local res p=$1; shift; fname $*; eval "$p=$res"; }; fcall'
function f1 {
res=$[($1+$2)*2];
}
function f2 {
local a;
eval ${fcall//fname/f1} a 2 3;
echo f2:$a;
}
a=3;
f2;
echo after:a=$a, res=$res
agt#agtsoft:~/temp$ ./fc
f2:10
after:a=3, res=